Generic Datasource with Additive Delta
Hi all
I have a question.
In whic case can I use a generic datasource with additive delta?
Does this delta mode make sens only with function module extraction?
If I extract data directly from a table, can I use this delta mode only if a field represents changes?
Thanks for your help!
S.
Stefania,
To my knowledge what you are thinking is wrong.
we have 2 Methods for Generic DS.
1. New status for changed Records.
2. Additive delta.
New status for changed records means
New Order
order no quantity
1000 10
order changed to quntity 8. then 2 records will posted 2 BW in first case.
1000 -10
1000 8
if you come to Additve delta.
for the same case it will send the same record as
1000 10
changed records
1000 -2
this is the difference. New status with changed records should be used only in association with ODS not cube becoz we don't have overwrite option.
Additive delta we can use for ODS and Cubes with update mode Addition.
Hope this is clear.
Regards,
Nagesh Ganisetti.
Similar Messages
-
Generic Datasource with Delta and functionmodule
Hi together,
who can help me ??
Ihave created a generic datasource with function module and
delta.
the extractor runs well while i use full update and also initialization.
If i start the delta extraction, the extractor crashed with short-dump.
the message is SAPSQL_INVALID_FIELDNAME
What can i do, and what is wrong.
regards
thorsten WeissHi Roberto,
here is the code from the function-module:
FUNCTION zbw_mm_get_eket.
""Lokale Schnittstelle:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SBIWA_S_INTERFACE-REQUNR
*" VALUE(I_DSOURCE) TYPE SBIWA_S_INTERFACE-ISOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SBIWA_S_INTERFACE-MAXSIZE DEFAULT 1000
*" VALUE(I_INITFLAG) TYPE SBIWA_S_INTERFACE-INITFLAG OPTIONAL
*" VALUE(I_READ_ONLY) TYPE SBIW_BOOL DEFAULT SBIW_C_FALSE
*" TABLES
*" I_T_SELECT TYPE SBIWA_T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SBIWA_T_FIELDS OPTIONAL
*" E_T_DATA OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
INCLUDE lrsalk01.
DataSource for table EKET
TABLES: zv_mm_eket.
interne Tabelle für Bearbeitung
DATA: itab_0 TYPE TABLE OF zstr_eket WITH HEADER LINE.
TYPES: BEGIN OF typ_categ,
j_4kbwef TYPE atnam,
/afs/bwel TYPE j_4kbwef,
END OF typ_categ.
DATA: l_s_data_eket TYPE zstr_eket,
ld_cat_struct TYPE j_4kcsgr,
lt_cat_fields TYPE TABLE OF j_4kcif001,
ls_cat_fields TYPE j_4kcif001,
ls_mara TYPE mara,
l_tabix LIKE sy-tabix,
itab_cat TYPE TABLE OF typ_categ ,
ls_cat TYPE typ_categ,
h_feldsize1(8) TYPE c,"wegen Typ-konflikt im FB
h_feldsize2(8) TYPE c."wegen Typ-konflikt im FB
Auxiliary Selection criteria structure
DATA: l_s_select TYPE rsselect.
Maximum number of lines for DB table
STATICS: s_t_select LIKE rsselect OCCURS 0 WITH HEADER LINE,
s_t_fields LIKE rsfieldsel OCCURS 0 WITH HEADER LINE,
counter
s_counter_datapakid LIKE sy-tabix,
cursor
s_cursor TYPE cursor.
Select ranges
RANGES: l_r_ebeln FOR zv_mm_eket-ebeln,
l_r_ebelp FOR zv_mm_eket-ebelp,
l_r_bsart FOR zv_mm_eket-bsart.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF i_initflag = sbiwa_c_flag_on.
Initialization: check input parameters
buffer input parameters
prepare data selection
Check DataSource validity
CASE i_dsource.
WHEN 'ZDS_V_MM_EKET'.
WHEN OTHERS.
IF 1 = 2. MESSAGE e009(r3). ENDIF.
this is a typical log call. Please write every error message like this
log_write 'E' "message type
'R3' "message class
'009' "message number
i_dsource "message variable 1
' function modul was created for DS ' &
'ZDS_V_MM_EKET"!'.
"message variable 2
RAISE error_passed_to_mess_handler.
ENDCASE.
APPEND LINES OF i_t_select TO s_t_select.
Fill parameter buffer for data extraction calls
S_T_SELECT-REQUNR = I_REQUNR.
S_T_SELECT-DSOURCE = I_DSOURCE.
S_T_SELECT-MAXSIZE = I_MAXSIZE.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
APPEND LINES OF i_t_fields TO s_t_fields.
ELSE. "Initialization mode or data extraction ?
Data transfer: First Call OPEN CURSOR + FETCH
Following Calls FETCH only
First data package -> OPEN CURSOR
IF s_counter_datapakid = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
LOOP AT s_t_select INTO l_s_select WHERE fieldnm = 'EBELN'.
MOVE-CORRESPONDING l_s_select TO l_r_ebeln.
APPEND l_r_ebeln.
ENDLOOP.
LOOP AT s_t_select INTO l_s_select WHERE fieldnm = 'EBELP'.
MOVE-CORRESPONDING l_s_select TO l_r_ebelp.
APPEND l_r_ebelp.
ENDLOOP.
LOOP AT s_t_select INTO l_s_select WHERE fieldnm = 'BSART'.
MOVE-CORRESPONDING l_s_select TO l_r_bsart.
APPEND l_r_bsart.
ENDLOOP.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
OPEN CURSOR WITH HOLD s_cursor FOR
SELECT (s_t_fields) FROM zv_mm_eket
WHERE
ebeln IN l_r_ebeln AND
ebelp IN l_r_ebelp AND
bsart IN l_r_bsart.
ENDIF. "First data package ?
Fetch records into interface table.
named E_T_'Name of extract structure'.
FETCH NEXT CURSOR s_cursor
APPENDING CORRESPONDING FIELDS
OF TABLE e_t_data
PACKAGE SIZE i_maxsize.
FETCH NEXT CURSOR s_cursor
APPENDING CORRESPONDING FIELDS
OF TABLE itab_0
PACKAGE SIZE i_maxsize.
LOOP AT itab_0 INTO l_s_data_eket.
l_tabix = sy-tabix.
Lesen Erstellungsdatum aus EKKO
SELECT SINGLE aedat FROM ekko INTO l_s_data_eket-sydat
WHERE ebeln = l_s_data_eket-ebeln.
Lesen Partner aus EKPA
SELECT SINGLE lifn2 FROM ekpa INTO l_s_data_eket-plief
WHERE ebeln = l_s_data_eket-ebeln AND
ebelp = l_s_data_eket-ebelp AND
ekorg = l_s_data_eket-ekorg AND
werks = l_s_data_eket-werks .
IF NOT l_s_data_eket-matnr IS INITIAL .
*A Lesen material für Kategoriestruktur j_4kcsgr(F001 oder R002)
CLEAR ls_mara.
CALL FUNCTION 'J_3A1_LESEN_MARA_SINGLE'
EXPORTING
i_matnr = l_s_data_eket-matnr
IMPORTING
e_mara = ls_mara
EXCEPTIONS
param_not_valid = 1
OTHERS = 2.
IF sy-subrc NE 0.
ENDIF.
*E Lesen material für Kategoriestruktur j_4kcsgr(F001 oder R002)
*A Aufsplitten Bestandskategorie
REFRESH lt_cat_fields.
CALL FUNCTION 'J_4KG_SPLIT_CAT'
EXPORTING
client = sy-mandt
csgr = ls_mara-j_4kcsgr
cat_appl = 'S'
cat_value = l_s_data_eket-j_4kscat
NECESSARY_SPECIFIED = ' '
TABLES
cat_fields_tab = lt_cat_fields
EXCEPTIONS
no_category_structure_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE."sy-subrc <> 0
Verarbeitung der Ergebnisse
LOOP AT lt_cat_fields INTO ls_cat_fields.
IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_SCONFIG'.
l_s_data_eket-zz_bwel_sconfig = ls_cat_fields-j_4kcatv.
ENDIF.
IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_CONFIG'.
l_s_data_eket-zz_bwel_config = ls_cat_fields-j_4kcatv.
ENDIF.
IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_COUNTRY'.
l_s_data_eket-j_3abwel_country = ls_cat_fields-j_4kcatv.
ENDIF.
IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_COUNTRYGRP'.
l_s_data_eket-zz_bwel_coungrp = ls_cat_fields-j_4kcatv.
ENDIF.
IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_STOCKTYPE'.
l_s_data_eket-zz_bwel_stktype = ls_cat_fields-j_4kcatv.
ENDIF.
IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_ORDER'.
l_s_data_eket-zz_bwel_order = ls_cat_fields-j_4kcatv.
ENDIF.
IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_QUALITY'.
l_s_data_eket-j_3abwel_qual = ls_cat_fields-j_4kcatv.
ENDIF.
ENDLOOP."lt_cat_fields
ENDIF.
*E Aufsplitten Bestandskategorie
*A Aufsplitten MAtrix
IF NOT l_s_data_eket-j_3asize IS INITIAL.
CALL FUNCTION 'J_3A_SPLIT_SIZES'
EXPORTING
matnr = l_s_data_eket-matnr
j_3asize = l_s_data_eket-j_3asize
IMPORTING
j_3akord1 = l_s_data_eket-j_3abwel_color
j_3akord2 = h_feldsize1
j_3akord3 = h_feldsize2
EXCEPTIONS
no_grid_determined = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
l_s_data_eket-zz_bwel_size1 = h_feldsize1.
l_s_data_eket-zz_bwel_size2 = h_feldsize2.
ENDIF.
ENDIF."not l_s_data_eket-J_3ASIZE is initial
*E Aufsplitten MAtrix
MODIFY itab_0 FROM l_s_data_eket INDEX l_tabix.
ENDIF."not l_s_data_eket-matnr is initial
ENDLOOP. "itab_0
An Ausgabe-Tabelle übergeben
APPEND LINES OF itab_0 TO e_t_data.
IF sy-subrc <> 0.
CLOSE CURSOR s_cursor.
RAISE no_more_data.
ENDIF.
s_counter_datapakid = s_counter_datapakid + 1.
ENDIF. "Initialization mode or data extraction ?
ENDFUNCTION.
regards
thorsten -
Generic datasource with Delta queue
Hi All,
I 've created a generic datasource on prices tables A* and KONP. Next, I used HowTo document "create generic datasource that uses delta queue", finding the right BTE that could catch prices modification. Up to this point, everything works fine.
I've extracted an Init delta to BW and now, on R/3, in RSA7, I can see a delta queue for my generic datasource.
When I modify price conditions in VK12, BTE works fine and I can see the counter in RSA7 increasing. I also can see new entries in table TRFCQOUT with status READY. (either in SE16 or in SMQ1 )
The problem is :
- in RSA7, if I want to display the posted data, system returns an empty list (whereas the counter is different from 0)
- when I run a delta InfoPackage, no data is sent to BW, but in table TRFCQOUT, status has been changed to READ for entries that previously had status READY (and old entries that had status READ due to a previous delta upload are deleted)
Does anyone has any idea about the reason of the issue ?
Thanks for any help
AJSure, I can.
The problem was in the specific coding that update the delta queue : not all the fields were updated and some of these fields were used as selection criteria in th delta infopackage...
in RSA7, when you try to see the data in the queue, the system only shows you the records that match the selection criterias of your delta IP...so in our case, because of those empty fields, no records were selected...
AJ -
Problem in creating a generic datasource with infoset
Dear Expert,
I have to create a generic datasource with infoset. I linked the infoset with a test program below. In the program, I have one selection option, which is s_order. After creating an infoset and a datasource, this selection option 'SELECT_S_ORDER' is added to my extract structure. However, after try filtering with this SELECT_S_ORDER, it doesn't filter data at all. Why? I want to filter data with my s_order.
REPORT ZBI_DS_TEST.
tables: vbak.
* DATA
field-symbols: <vbak> type vbak.
data: t_vbak type table of vbak,
w_vbak type vbak,
t_vbak2 type table of vbak,
w_vbak2 type vbak.
* SELECT-OPTIONS
selection-screen begin of block b1 with frame title text-001.
select-options: s_order for vbak-vbeln.
selection-screen end of block b1.
start-of-selection.
* <Query_head>
perform sub_select_data.
loop at t_vbak into w_vbak2.
move-corresponding w_vbak2 to vbak.
* <Query_body>
endloop.
*& Form sub_select_data
* Select data
FORM sub_select_data .
select *
into table t_vbak
from vbak
where vtweg = 'IP'.
ENDFORM. " sub_select_dataWhat do you mean by linking program with infoset?
Do you get the field in your RSA3 Tcode? -
All;
We need to do live cache extraction for APO data. How do we set up that in BW? Is this done using generic datasource with a Function module? Can anyone give me some ideas?
Thanks,
Manasa.Hi,
In the Extractution structure you need to put the two dates and mark both like selection parameter.
This is the template for Generic FM Extractors "RSAX_BIW_GET_DATA_SIMPLE" to create the FM.
Follow the FM Code, in the part of the first execution you need to do two loops (one for every date).
Regards,
Dani -
Generic Datasource with Fuction Module with delta on Created Date
Hi Experts,
I have created a generic datasource using Function Module RSAX_BIW_GET_DATA. I have copied this function module and created a my own Function Module. I want to load delta using this. But I don't know how to handle delta in the code.
my code is working for full load but not for delta. I have seen that in ROOSOURCE tabel the Delta field is showing the AIE instead of D and extraction method is showing as F2. I have searched a lot of forums and articles but didn't get how to handle this.
Please advice.Hi Amit,
Go through the link as suggested by AKhan which lets you understand the concept of offsets and the last extraction status.
In case of Table or View based GDS, the system takes care of the deltas based on the selections you make in the "Generic Delta" screen whereas in case of FM based DS, it is your responsibility to handle this part. Within your code, capture if the load is a Delta load (I_UPDMODE = D). Since your delta is on Created Date, maintain a Z table with name of the DS as the Key and a field representing the current value of the Delta field(created date in this case). When you first load the delta, there will be no record for your DS in this table. Create an entry with the current day. Next time when you load a delta, take this value, compare it with sy-datum and get all the records falling within these days. This has to be done in the Select stmt. Once selection happens, replace the value in the Z table with sy-datum. This way you can simulate the delta. The Z table can be used for other FM based Datasources also as it has DS as the key.
It would be easy if the exact SAP table where RSA7 delta field status is stored is known. Otherwise, the above method can be used.
Revert for any further queries. -
Generic DataSource using FM - Delta doubt
Hi All,
I have few doubts on Generic DataSource Delta.
I am working on one HR requirement. where I need to pull the Mandatory courses information.
to get this done, we have created one Generic DataSource using Function Module.
FM has huge and complex logic, at present it is taking long time when I run in RSA3, if I continue with this to BI, daily running FULL load to BI is not suggestible, because it takes much time to load.
I have planned to set the Delta, just want to know what would be the best option to set the delta option for this requirement? and how? I have 2 dates (Course Start and End dates), Employee, Course Id, Course Type, Position, Job, etc in my DS structure.
Please suggest someone so that I can do FULL load once in BI and continue with Delta without missing any delta records going forward.
Regards,
KiranHi,
In mystrucure used dates are not relating to aedat and erdat, they are CHAR type. here the requirement is little different.
Regards,
Kiran -
Generic datasource with function module
I am trying to create a transactional generic datasouce with fm.
I create my structure ZNVBAK1, create a function group ZRSAX, a FM ZRSAX_BIW_GET_DATA_SIMPLE1 and I adjust my source code.
I activated both FM and Function Group.
Now under RSO2 I enter the datasource name as in my code, I enter the application component SD as well as the description
When I choose extraction by FM, nothing happens, no windows prompting me to enter my function module as well as extract structure, I checked everthing look good.
Any Idea what I might be doing wrong?
Thanks!!Hi ,
First put values in Short Description, Medium Description & long Description,fields and then click on the Extraction by FM. You will get those filelds unabled.
You can also refer.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33?quicklink=index&overridelayout=true
Edited by: Nilesh Vakil on May 31, 2011 7:57 AM -
Generic Extractor with ALE-Delta Capability
Hi all,
I need to create a generic Data source based on 2 tables with fields: MARA-SPART.
MAKT-MATNR,SPRAS,MAKTX.
so i created a view on same and used it in creation of data source in T.C: RSO2.
My requirement is to make this Data source
Delta-capable using <b>ALE-Delta mechanisum</b>.
Please let me know your views regarding same.
And i promise to return and reward the answers.
Thanks&Regards,
Augustine.Hi Augustine and welcome to the sdn,
it is not possible to get a delta on the fields you added to your view. You have 2 options.
1st: add fields aedat and erdat of table mara to your view. Create 2 infopackages in BW to load all records created and all records changed in a specific time range.
2nd: create a fm and select the required fields from mara and makt that are created or changed in a specific time range. Create a ddic structure as extract structure containing spart, matnr, spras, maktx and a date field for the generic delta. See also this information about fm-extraction: /people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Hope this helps
regards
Siggi -
Generic Delta enabled datasource with Functional Module
Hi All,
We have a requirement to create a Generic Data Source which will be having fields from the tables COEP, COBK & BKPF. Generic datasource should be delta enabled. We are planning to achive it by writing a Functional Module.
No my question is can i use BWFI_AEDAT & BWOM2_TIMEST tables to make Generic Datasource delta enabled. If i can then please let me know how. If i can't then please let me know what should i do to make it delta enabled.
Thanks & Kind REgards,
HarmanHi,
before looking in specifics on your question please have a look at
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30f1a423-02ae-2e10-bd85-bde64e61fe7b?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70806d62-1c59-2e10-7597-91c114600d32?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c062a3a8-f44c-2c10-ccb8-9b88fbdcb008?QuickLink=index&overridelayout=true
And finally:
http://help.sap.com/saphelp_nw70/helpdata/en/d0/4cc138944cfa06e10000000a11405a/content.htm
Last link is talking about deltas from COEP table and one of the fields you are mentioning (which might mean something else than you expected)
Hope this helped
C. -
Delta-Specific Field for Generic DataSource
Hi,
I have defined a Generic DataSource for Transaction data on R/3-Side.
This DataSource is based on View/Table EKKO (Purchasing Document Header) for some specific customer requirements. Delta-Specific Field is AEDAT (Calend. Day). Safety Interval Upper Limit is set 1 Cal. Days. No Safety Interval Lower Limit has been defined. "New Status for Changed Records" has been marked.
When we see this DataSource in Extractor Checker (RSA3), this data source
Extracted all delta data where AEDAT is not blank.
When I see the content of table EKKO, I can find few records where AEDAT is blank.
These records are missing in Extractor Checker.
How I can solve this problem? Which delta-specific field can be used in
this generic Datasource? Should I define an additional Generic DataSource with
Delta-Specific Field BEDAT (as BEDAT is filled when AEDAT is blank in table EKKO)?
Thanks for the answer.Delta based on calday wont pick all the records which are recently posted and you can not run the delta more than one time in a day ,end of the day only you can run the delta.
Set the delta as Tme Stamp and specify the Upper limit to 5 minuts.
We can run the delta no. times and pick the documents posted in short interval of time.
With Regards,
Kishore. -
Hi all,
In case of standard datasource, the document posted in R/3 is written to BW delta queue. Generic datasources don't support delta update directly but support generic delta. Can you pleasce clarify what exactly happend in case of generic datasoure.
Thanks in advnce,
Zak.based on timestamp or values of certain field generic datasource shall manage delta. Check this please - Generic Delta-
http://help.sap.com/saphelp_nw70/helpdata/en/37/4f3ca8b672a34082ab3085d3c22145/content.htm -
Creating a Generic Datasource using Function Module
Hi Guru's
We are tryin to create a Generic datasource using function module, we have found few old how to guides for doing the same but it is not effective and need to be altered. Can anyone suggest me the latest step by step procedure to create the above, also if you have the how to guide kindly paste the link as it will be a great help at this point.
Thanks in advance
Regards
LiquidHi,
Please goto the Following links :-
PDF
1) http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c062a3a8-f44c-2c10-ccb8-9b88fbdcb008?quicklink=index&overridelayout=true
2) http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33?quicklink=index&overridelayout=true
SAP Forum
3) Re: DataSouce based on FM
4) http://forums.sdn.sap.com/post!reply.jspa?messageID=10050614
5) https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
6) Re: Generic datasource with functional module
7) Generic Extractor (FM based) - Delta Enabled
Regards
Obaid -
Hi,
I have to rename an exisitng generaic daatsource technical name.
Could you please tell me how i can do this?
Regards
SyedWe cannot change the techninal name of any object .
If you want the generic datasource in your desired techinal name, then create a new Generic Datasource with the same settings like your old datasource. And then use the new datasource in your dataflow And delete the old one if you dont need it..
--- Thanks... -
How to deal with delete record in generic delta of generic datasource
Hi,
Anyone can give me suggestion about the delete record in generic delta of generic data. I need extract data with a generic datasource and hope deleted record in datasource also can be "delete" in next delta extraction. I do a test with generic delta. It seem that the delete record can not be updated in ODS. but updated record can be updated in next delta extraction.
How dose BW generic delta deal with the deleted record with generic delta mechanisim? Or how can I use generic delta mechanisim to realize that BW "delete" the deleted record of source system in ODS with delta extraction?
Thanks in advance!
BillyDelete is not supported in delta mechanism of generic delta extractor. You will need to add a workaround for that.
- Capture the deleted records somewhere (maybe enhance the txn deleting the record so the key is written to a Z table). Take these records to BW and manipulate the recordmode to affect deletion of corresponding record from ODS.
- If your generic delta is based on FM, and if the 'delete' is captured in change document tables, add the logic to check change document tables whether any records are deleted, and if yes, send those to BW with appropriate recordmode to achieve deletion.
Maybe you are looking for
-
Can't believe the decision to group photos only with the 'Recent' or by Collections. Apple logic doesn't match individual's logic on the groupings. PLEASE go back or find another method!! So many single photos on separate lines in Collections -- eve
-
MIRO / - Can it match on item number instead of line number?
Hello, I am bringing in INVOICE01 iDocs and posting them (same as manual MIRO) against 2 Way Purchase Orders with function module IDOC_INPUT_INVOIC_MRM. Since the PO's are 2 Way PO's we don't do receipts against them. My Issue: This vendor does not
-
I have created a Table Control in a Screen Painter and I need help to fill it. I assign to the Table Control a field of an internal table but when I try to activate it i receive the followin error: The field "XXXX-XXXX" is not assigned to a LOOP. "LO
-
I noticed one bug in iOS App Store
On iOS App Store, in Top Free category in Top Chart option there is a app which is not free.
-
Hi Gurus, Please explain what is the role of IDOC AND BAPI? Where and why do we use them? Best Regards, Kapil