Generic Datasource with Fuction Module with delta on Created Date

Hi Experts,
I have created a generic datasource using Function Module RSAX_BIW_GET_DATA. I have copied this function module and created a my own Function Module. I want to load delta using this. But I don't know how to handle delta in the code.
my code is working for full load but not for delta. I have seen that in ROOSOURCE tabel the Delta field is showing the AIE instead of D and extraction method is showing as F2. I have searched a lot of forums and articles but didn't get how to handle this.
Please advice.

Hi Amit,
Go through the link as suggested by AKhan which lets you understand the concept of offsets and the last extraction status.
In case of Table or View based GDS, the system takes care of the deltas based on the selections you make in the "Generic Delta" screen whereas in case of FM based DS, it is your responsibility to handle this part. Within your code, capture if the load is a Delta load (I_UPDMODE = D). Since your delta is on Created Date, maintain a Z table with name of the DS as the Key and a field representing the current value of the Delta field(created date in this case). When you first load the delta, there will be no record for your DS in this table. Create an entry with the current day. Next time when you load a delta, take this value, compare it with sy-datum and get all the records falling within these days. This has to be done in the Select stmt. Once selection happens, replace the value in the Z table with sy-datum. This way you can simulate the delta. The Z table can be used for other FM based Datasources also as it has DS as the key.
It would be easy if the exact SAP table where RSA7 delta field status is stored is known. Otherwise, the above method can be used.
Revert for any further queries.

Similar Messages

Generic Extractor using Function module with Complex Interface

Hi,
Has anyone created Generic extractor using Function module with Complex Interface?
What is the difference between Complex and Simple interface in Function module?
Pls explain.
Thanks,
Gopal

Hi,
Go through this link.....
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
GTR

Creating a Generic Datasource using Function Module

Hi Guru's
              We are tryin to create a Generic datasource using function module, we have found few old how to guides for doing the same but it is not effective and need to be altered. Can anyone suggest me the latest step by step procedure to create the above, also if you have the how to guide kindly paste the link as it will be a great help at this point.
Thanks in advance
Regards
Liquid

Hi,
Please goto the Following links :-
                                                                      PDF
1)         http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c062a3a8-f44c-2c10-ccb8-9b88fbdcb008?quicklink=index&overridelayout=true
2)        http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33?quicklink=index&overridelayout=true
                                                 SAP Forum
3)        Re: DataSouce based on FM
4)       http://forums.sdn.sap.com/post!reply.jspa?messageID=10050614
5)       https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
6)       Re: Generic datasource with functional module
7)       Generic Extractor (FM based) - Delta Enabled
Regards
Obaid

Generic DataSource on Function Module - Query

Hi All,
We have a requirement wherin we have to pull data from MARM (Material UOM fields) table. This table has some 1,130,000 records. Since this table doesn't have a Last Changed on or Created on field we are not able to create a Generic Delta on the table itself.
We have come to know that in MM02, we can change the Unit of Measure fields for material. When we update in MM02, both MARA and MARM table gets changed. MARA will be updated with the last changed date.
So we are thinking of creating a Generic DataSource on Function module so that we can perform the delta on Last changed or Created on field of MARA.
I have a doubt about creating the function module. How should we achieve the initial load (Getting all the material and it's UOM to BW) and then Delta loads through the function module?
Does the first load needs to be or should be a full load?
If someone can tell me the steps that should be followed, it would be very helpful
Please let me know your suggesstion.
Regards,
Vivek Das Gupta

Hi
Could u try creating a view based Datasource.
Also u can do a full load in parallel by creating 4-5 Infopackages. After which a Init without data transfer can be done.
Hope this helps.
Reg
Aparna

How to create a generic datasource from function module?

Dear experts,
I have created a generic datasource from function module. For this extrator, I created a function module and a structure.
I have now some difficulties to continue:
In this function module, i get data from different transparent tables. Then i put these data into an internal table.
I just don't know what is the relatioin between the structure i defined and this internal table.
I should make "iTab structure AA" in the source code?
Thanks

Hi..
check this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
1. Create s structure with the fields that you need from the 4 tables . Activate.
2. Goto SE 80 Select The Function Group , Copy , Select the Function module
" RSAX_BIW_GET_DATA_SIMPLE " and Give a New name starting With
Y or Z .
3. SE37 ->Your Function module name -> Change , In table tab give your structure
name by deleting the associated type given in " XXXX " .
4. Now select source code and Do the coding . Give Data source name in Coding .
In your case you have to take data from more that 1 table .
5. Activate the Function Group .
6. In RSO2 Create the Data source , Give the Function Module Name , And Save.
7. RSA3 -> Give data source name and Check for the Records .
Creation of custom datasource. (Using function module)
.Create a function group .
. Structure ZTXXXX
Create function module (i.e. ZTESTXXX) .
. Create the data source using transaction (RSO2).
. If structure exists for the table parameter of your function module then ok else create a structure for the table parameter .
Test the datasource in R/3 using transaction RSA3.
Transfer the data source to BW System and replicate it in the BW-System.
Message was edited by:
shiv

Can anybody explain me creating Generic Datasource using Function module?

Hi,
can anybody explain me creating Generic Datasource using Function module?
Thax in advance,
Ravi.

Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
1. Create s structure with the fields that you need from the 4 tables . Activate.
2. Goto SE 80 Select The Function Group , Copy , Select the Function module
" RSAX_BIW_GET_DATA_SIMPLE " and Give a New name starting With
Y or Z .
3. SE37 ->Your Function module name -> Change , In table tab give your structure
name by deleting the associated type given in " E_T_DATA " .
4. Now select source code and Do the coding . Give Data source name in Coding .
In your case you have to take data from more that 1 table .
5. Activate the Function Group .
6. In RSO2 Create the Data source , Give the Function Module Name , And Save.
7. RSA3 -> Give data source name and Check for the Records .
Creation of custom datasource. (Using function module)
<b>is an example</b>
1.Create a function group .
2. Structure ZTEST123
ZMATNR MATNR CHAR 18 0 Material Number
ZMTART MTART CHAR 4 0 Material type
ZMBRSH MBRSH CHAR 1 0 Industry sector
ZMATKL MATKL CHAR 9 0 Material group
ZBISMT BISMT CHAR 18 0 Old material number
ZMAKTX MAKTX CHAR 40 0 Material description
3. Create function module (i.e. ZTEST.) .
FM - YMARA_DATA_TRNS
FUNCTION YMARA_DATA_TRNS.
""Local Interface:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*" VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*" VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*" TABLES
*" I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*" E_T_DATA STRUCTURE ZTEST123 OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
data : ZTEST123 type ZTEST123 occurs 0 with header line.
Maximum number of lines for DB table
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
S_COUNTER_DATAPAKID LIKE SY-TABIX.
DATA: begin of t_mara occurs 0,
ZMATNR type MATNR,
ZMTART type MTART,
ZMBRSH type MBRSH,
ZMATKL type MATKL,
ZBISMT type BISMT,
end of t_mara.
DATA: begin of t_makt occurs 0,
ZMATNR type MATNR,
ZMAKTX type MAKTX,
end of t_makt.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
Check DataSource validity
CASE I_DSOURCE.
WHEN 'ZZMARA_DATA'.
WHEN OTHERS.
IF 1 = 2. MESSAGE E009(R3). ENDIF.
this is a typical log call. Please write every error message like this
LOG_WRITE 'E' "message type
'R3' "message class
'009' "message number
I_DSOURCE "message variable 1
' '. "message variable 2
RAISE ERROR_PASSED_TO_MESS_HANDLER.
ENDCASE.
Fill parameter buffer for data extraction calls
S_S_IF-REQUNR = I_REQUNR.
S_S_IF-DSOURCE = I_DSOURCE.
S_S_IF-MAXSIZE = I_MAXSIZE.
ELSE. "Initialization mode or data extraction ?
Data transfer: First Call OPEN CURSOR + FETCH
Following Calls FETCH only
First data package -> OPEN CURSOR
IF S_COUNTER_DATAPAKID = 0.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
select MATNR
MTART
MBRSH
MATKL
BISMT
from mara up to 10 rows
into table t_mara.
if not t_mara[] is initial.
select MATNR
maktx
from makt
into table t_makt
for all entries in t_mara
where matnr = t_mara-zmatnr.
endif.
loop at t_mara.
read table t_makt with key zmatnr = t_mara-zmatnr.
ZTEST123-zmatnr = t_mara-zmatnr.
ZTEST123-ZMTART = t_mara-ZMTART.
ZTEST123-ZBISMT = t_mara-ZBISMT.
ZTEST123-ZMBRSH = t_mara-ZMBRSH.
ZTEST123-ZMATKL = t_mara-ZMATKL.
ZTEST123-zmaktx = t_makt-zmaktx.
append ZTEST123.
clear ZTEST123.
endloop.
clear E_T_DATA.
refresh E_T_DATA.
E_T_DATA[] = ZTEST123[].
ENDIF.
S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF. "Initialization mode or data extractio
ENDFUNCTION.
3. Create the data source using transaction (RSO2).
4. If structure exists for the table parameter of your function module then ok else create a structure for the table parameter E_T_DATA.
5. Test the datasource in R/3 using transaction RSA3.
6. Transfer the data source to BW System and replicate it in the BW-System.

Creating generic datasource using function module in R/3 4.6c

Hi,
I am not able to see the option (in TC RSO2) to create generic datasource using function module in R/3 4.6c. Is there any special plug in or some SAP Note to be applied to get the option ?
Waiting for a quick response.
Thanks and Regards,
Deepak

Hi Sat,
Thanks for the reply.
I know that creating generic datasource from function module is available in R/3 4.7.
In 4.6c version there are only two options available. They are Extraction from DB View and Extraction from SAP Query.
The third option i.e. Extraction from Function Module is not available in 4.6c. I wanted to know if there is any plugin that needs to be installed to get this option.
Thanks and Regards,
Deepak

Error in Extraction with Generic Datasource via Function Module

Dear Gurus,
Iam working for BI-HR module.We are extracting data with generic data source via function module. The client some more extra fields in already existing DS. So we made a copy of that Function module and tried to create new generic DS, we got error while extraction like "Error occured during the extraction process". Can you please help in resolving this issue, your valuable suggestion would be highly appreciated.
Thanks and regards
Arun S

Hi,
Which structure are you using??
Are you using the same old structure for this function module as well.
Have you enhanced the structure with new required fields.
New extrac fields needs to be added to existing structure if you are using the same or create a new one and make sure that you have all the fields in the structure which you are going to use in the data source.
You need to take care for the append as well and the issue could be in the code as well.
Make sure you have written the proper code and just for the new fields done an append
Thanks
Ajeet

Generic datasource by function module to fetch data from multiple tables?

I'm writing a function module to fetch price, for generic datasource.
At first, extract test is OK. But InfoPackage never stop when loading data to PSA in BW.
And I find the example codes:
     OPEN CURSOR WITH HOLD S_CURSOR FOR
      SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
                               WHERE CARRID IN L_R_CARRID AND
                                     CONNID IN L_R_CONNID.
    ENDIF.                             "First data package ?
* Fetch records into interface table.
*   named E_T_'Name of extract structure'.
    FETCH NEXT CURSOR S_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA
               PACKAGE SIZE S_S_IF-MAXSIZE.
    IF SY-SUBRC <> 0.
      CLOSE CURSOR S_CURSOR.
      RAISE NO_MORE_DATA.
    ENDIF.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.
There using Cursor to fetch data package by package, and raise exception NO_MORE_DATA to stop the loading process.
Now I fetch data from multiple tables, I don't think I can use Cursor.
Then How can I handle this?
Thanks a lot.

Thanks
IF IT_999[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A999 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_999
                WHERE
*      A~KNUMH = IT_999-KNUMH AND
       ( ( A~KSCHL = 'ZPRC' AND VKORG = 'Z000' AND VTWEG = 'Z1' ) OR
                      ( A~KSCHL = 'ZPRD' AND VKORG = 'A000' AND VTWEG = 'Y3' ) ) AND
*                      A~DATBI >= SY-DATUM AND
                      LOEVM_KO = ''.
    SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A999 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_999
                WHERE
*      A~KNUMH = IT_999-KNUMH AND
      A~KSCHL = 'ZPR3' AND A~VKORG = 'I000' AND
*                      DATBI >= SY-DATUM AND
                      LOEVM_KO = ''.
ENDIF.
IF IT_997[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A997 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_997
                WHERE
*      A~KNUMH = IT_997-KNUMH      AND
      A~KSCHL = 'ZPRA' AND VTWEG = 'Y1' AND
*                      DATBI >= SY-DATUM AND
                  LOEVM_KO = ''.
ENDIF.
IF IT_996[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
       TABLE TP_DATA
         FROM A996 AS A
           INNER JOIN KONP AS B
               ON A~KNUMH = B~KNUMH
           INNER JOIN MARA AS C
              ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_996
                WHERE
*      A~KNUMH = IT_996-KNUMH AND
      A~KSCHL = 'ZPRB' AND
*                       DATBI >= SY-DATUM AND
      LOEVM_KO = ''.
ENDIF.
SELECT   MATNR     "u7269u6599u53F7u7801
           MEINH     "u4ED3u50A8u5355u4F4Du7684u5907u7528u8BA1u91CFu5355u4F4D
           UMREZ     "u57FAu672Cu8BA1u91CFu5355u4F4Du8F6Cu6362u5206u5B50
           UMREN     "u8F6Cu6362u4E3Au57FAu672Cu8BA1u91CFu5355u4F4Du7684u5206u6BCD
      FROM MARM
      INTO CORRESPONDING FIELDS OF TABLE IT_MARM
       FOR ALL ENTRIES IN TP_DATA
     WHERE MATNR = TP_DATA-MATNR AND MEINH = TP_DATA-KMEIN.
LOOP AT TP_DATA.
    IF TP_DATA-KPEIN NE 0.
      TP_DATA-KBETR = TP_DATA-KBETR / TP_DATA-KPEIN.
      TP_DATA-KHETR = TP_DATA-KHETR / TP_DATA-KPEIN.
    ENDIF.
    IF TP_DATA-KSCHL = 'ZPRA'.
*       TP_DATA-MEINH = 'ZI'.
*      TP_DATA-KSCHL = 'B4'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'CT'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPRB'.
*      TP_DATA-KSCHL = 'L0'.
*       TP_DATA-MEINH = 'ZI'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPRC' OR TP_DATA-KSCHL = 'ZPRD'.
*       TP_DATA-MEINH = 'ZI'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'WZI'.
        TP_DATA-KBETR = TP_DATA-KBETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPR3'.
*      TP_DATA-KSCHL = 'B2'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ENDIF.
    TP_DATA-MEINH = '01'.
    MODIFY TP_DATA.
E_T_DATA-MATNR =   TP_DATA-MATNR.
E_T_DATA-KSCHL =   TP_DATA-KSCHL.
E_T_DATA-KHETR =   TP_DATA-KHETR.
E_T_DATA-KBETR =   TP_DATA-KBETR.
E_T_DATA-KMEIN =   TP_DATA-KMEIN.
E_T_DATA-DATAB =   TP_DATA-DATAB.
E_T_DATA-DATBI =   TP_DATA-DATBI.
APPEND E_T_DATA.
    CLEAR WA_MARM1.
    CLEAR WA_MARM2.
ENDLOOP.
Edited by: Shen Peng on Oct 20, 2010 10:09 AM

Generating a Generic DataSource using Function Modules

I am attempting to create a generic DataSource using a function module. All of our DataSources are business content or custom generated that involve views. At least in our company this is true. Is there any resources available to me with examples on how to do this. I have looked at SAP's 'simple example' and would need a ABAP/BW Guru to figure it out! Any help would be greatfull. Thanx. JJ

Hi Jerry,
The simple example should provide you with the necessary requisite. All what you need to do is to
create your own extract structure and assign that as type for the table parameter e_t_data.
Now you will get the selection criteria, as well as the fields selected in the datasource from the 2 incoming tables. You need to write the necessary abap code to execute a query and populate your extract struture.
Once important peculiarity of this function module is that it is called several times, or as many times as the MAX parameter + 1. ie, once for each row fetched. Hence you will find a persistence method of using a CURSOR with HOLD property to retain the data between the function calls.
The help in generic datasource explains the 3 modes,
initialize, first call and the repeat call for the
function module. The simple function module example actually provides the necessary logic to deal with these modes and the example uses the sflight table.
Hope that is some information that could help u begin with.
Anoop C M

Generic DataSOurce on Function Module

Hi Everyone,
I know how to create a Generic Datasource based on a view. I amfirst time trying to create a Generic DS based on FM. I know the steps. Like we go to SE11..select database type..give the name..select structure..give the name..enter the fields name in component save it..then go to SE80..select function gp..etc...etc.
My question is This function module should get data from two tables. In which step we need to mention the table names?
Can anyone please explain?
Regards

Hi,
If you would like to have a DS which'll extract using FM then you've to copy RSAX_BIW_GET_DATA_SIMPLE FM.
Now once you copy it then in that only you see the line:
open cursor with hold s_cursor for
select distinct pernr from pa0000
where pernr in l_r_pernr
and stat2 = '3'.
If you want to have more than one table then create cursors and use them accordingly.
Best Regards,
Rachit

Generic Datasource by Function Module.

Hi there,
Our ABAP guy is building a function module to bring data to BW by using Generic DataSource. My qtn is how we are going to handle delta?
Can we use the delta provided in Rso2 or we have to hard code it in the function module?
Your prompt help will be highly appreciated.
Kara.

Hi,
Just Go through these.
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Hope it helps.
Thanks,
-Vijay

Generic DataSource using function module

Hello experts,
I created a generic dataSource using copy of function module RSAX_BIW_GET_DATA. It is syntactilly correct. But when I execute and debug associated generic DataSource in RSA3, this generic function module could not identify DataSource(i_isource) and update mode(i_updmode).
Could you please answer what went wrong?
I also created by using copy function module RSAX_BIW_GET_DATA_SIMPLE. I did not find above such problem. The generic DataSource is executed fine in this case.
Thanks in advance,
Zak.

http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c062a3a8-f44c-2c10-ccb8-9b88fbdcb008
/people/p.renjithkumar/blog/2009/10/07/generic-datasource-creation-using-function-module

RFC-enabled fuction module with the table parameter as Web Service

Hello,
i try to consume a webservice in my Web Dynpro Application from WAS 6.20. The service consist in a RFC-function module. This function module has more table-parameters. When i execute the service the service terminate correctly but no data is passed to my Web Dynpro Application. When i test the rfc-function module locally i get the correct results in the tables.
Any suggestions?
Thanks for your help!
Regards Thomas.

Hello Thomas,
have you tried to analyze the HTTP Traffic from the Web Dynpro Application Sever to the Backend? I suggest Ethereal for doing this.
Regards
Gregor

How to initiate a RFC fuction module from ABAP and push data to Java prgm

I want to push the data from ABAP program to a java program, the RFC connection has to be initiated from ABAP. How can i do this.
Kindly help me with a example program if possible.
Thanks in advance.
Sounder.

Hi,
If you are using JCo connector for the interface, then please look into this link
http://www.sapdevelopment.co.uk/java/jco/bapi_jco.pdf
aRs

Generic Datasource with Fuction Module with delta on Created Date

Similar Messages

Maybe you are looking for