Generic Delta Extraction (Bill Plan Data)

Hi BW Gurus,
We need to cerate data source from Bill plan extractor.
Please note that there is no SAP standard extractor for the bill plan data. So that is the reason we are using generic extractor (RSO2). We were using sales order delta extract program to find out the changes in bill plan data and there was routine in that extract which updated the custom table. But, soon they have to get rid of this design, because they observed that all the changes being done to bill plan were not being captured in the sales order delta extract. So, they have to go ahead with a full extract instead of the delta extract for bill plan data. Now we need to create design so we can do a delta extract on the billing plan data.
Please advice me ASAP.
In Advance Many thanks for your help.
Regards
SAP Team

You could use the date field instead , you could have a lower safety interval and then when you do the delta again the records included in the lower safety interval are included. As for delta with timestamp , I have a question what is the timestamp used for delta - is it UTC Timestamp or the date and time concatenated together. UTC Timestamp did not seem to work for me and I did not have the luxury of having a concatenated timestamp.
When I checked the base tables for delta maintenance , I found both timestamps and am confused as to what timestamps to use.
Arun
P.S I have a current delta with changed date and a lower safety interval of 1 day and it is working fine so far.

Similar Messages

Generic Delta extraction by Function module issue

Hello Experts,
Please help !!!
I have problem for delta extraction by Function module. For the full load, I wrote function module based on RSAX_BIW_GET_DATA_SIMPLE. It works fine.
But I would like to have the delta load enabled. Therefore, I modified the datasource, add a delta specific field u2018ztimestampu2019, which type is calendar day.
Then I create a function module based on template u2018RSAX_BIW_GET_DATAu2019, as this support the upload mode. But when I test this datasource in RSA3, no matter itu2019s full load or initial delta load, it always send me an error, u201CErrors occurred during the extractionu201D.
I had some debug, and found that there is no value for i_isource when my function module is called. Therefore it raised the exception.
But I do not have the chance to debug my code for the delta logic, can somebody help to check?
I also check the entries in ROOSOURCE,
For my datasource ZTRNREC_FM_DELTA, The DELTA value is u2018AIEu2019, and extraction method is u2018F2u2019, should I change them to DELTA= u2018Du2019 and extraction method to u2018F1u2019? Where to change?
FUNCTION ZRSAX_TRAININGREC_DELTA.
""Local Interface:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SBIWA_S_INTERFACE-REQUNR
*"     VALUE(I_ISOURCE) TYPE SBIWA_S_INTERFACE-ISOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SBIWA_S_INTERFACE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SBIWA_S_INTERFACE-INITFLAG OPTIONAL
*"     VALUE(I_UPDMODE) TYPE SBIWA_S_INTERFACE-UPDMODE OPTIONAL
*"     VALUE(I_DATAPAKID) TYPE SBIWA_S_INTERFACE-DATAPAKID OPTIONAL
*"     VALUE(I_PRIVATE_MODE) OPTIONAL
*"     VALUE(I_CALLMODE) LIKE ROARCHD200-CALLMODE OPTIONAL
*"     VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*"      I_T_SELECT TYPE SBIWA_T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SBIWA_T_FIELDS OPTIONAL
*"      E_T_DATA STRUCTURE ZTRN_REC_TIME OPTIONAL
*"      E_T_SOURCE_STRUCTURE_NAME OPTIONAL
*" EXCEPTIONS
*"      NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
The input parameter I_DATAPAKID is not supported yet !
Example: InfoSource containing TADIR objects
Auxiliary Selection criteria structure
DATA: l_s_select TYPE sbiwa_s_select.
Maximum number of lines for DB table
STATICS: l_maxsize TYPE sbiwa_s_interface-maxsize,
          S_S_IF TYPE SRSC_S_IF_SIMPLE,
          S_COUNTER_DATAPAKID LIKE SY-TABIX.
Parameter I_PRIVATE_MODE:
Some applications might want to use this function module for other
purposes as well (e.g. data supply for OLTP reporting tools). If the
processing logic has to be different in this case, use the optional
parameter I_PRIVATE_MODE (not supplied by BIW !) to distinguish
between BIW calls (I_PRIVATE_MODE = SPACE) and other calls
(I_PRIVATE_MODE = X).
If the message handling has to be different as well, define Your own
messaging macro which interprets parameter I_PRIVATE_MODE. When
called by BIW, it should use the LOG_WRITE macro, otherwise do what
You want.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF i_initflag = sbiwa_c_flag_on.
Initialization: check input parameters
                buffer input parameters
                prepare data selection
The input parameter I_DATAPAKID is not supported yet !
Invalid second initialization call -> error exit
    IF NOT g_flag_interface_initialized IS INITIAL.
      IF 1 = 2. MESSAGE e008(r3). ENDIF.
      log_write 'E'                    "message type
                'R3'                   "message class
                '008'                  "message number
                ' '                    "message variable 1
                ' '.                   "message variable 2
      RAISE error_passed_to_mess_handler.
    ENDIF.
Check InfoSource validity
    CASE i_isource.
      WHEN 'ZTRNREC_FM_DELTA'.
      WHEN OTHERS.
        IF 1 = 2. MESSAGE e009(r3). ENDIF.
        log_write 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                  i_isource            "message variable 1
                  ' '.                 "message variable 2
        RAISE error_passed_to_mess_handler.
    ENDCASE.
Check for supported update mode
    CASE i_updmode.
      WHEN 'F'.
      WHEN 'D'.
      WHEN 'R'.
      WHEN OTHERS.
        IF 1 = 2. MESSAGE e011(r3). ENDIF.
        log_write 'E'                  "message type
                  'R3'                 "message class
                  '011'                "message number
                  i_updmode            "message variable 1
                  ' '.                 "message variable 2
        RAISE error_passed_to_mess_handler.
    ENDCASE.
Check for obligatory selection criteria
    APPEND LINES OF i_t_select TO g_t_select.
Fill parameter buffer for data extraction calls
    g_s_interface-requnr    = i_requnr.
    g_s_interface-isource   = i_isource.
    g_s_interface-maxsize   = i_maxsize.
    g_s_interface-initflag = i_initflag.
    g_s_interface-updmode   = i_updmode.
    g_s_interface-datapakid = i_datapakid.
    g_flag_interface_initialized = sbiwa_c_flag_on.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
    APPEND LINES OF i_t_fields TO g_t_segfields.
ELSE.                 "Initialization mode or data extraction ?
Data transfer: First Call      OPEN CURSOR + FETCH
               Following Calls FETCH only
LOOP AT G_T_SELECT INTO L_S_SELECT
        WHERE FIELDNM = 'ZTIMESTAMP'.
ENDLOOP.
      IF G_COUNTER_DATAPAKID = 0.
        IF L_S_SELECT-LOW = '' AND L_S_SELECT-HIGH = ''.
        OPEN CURSOR WITH HOLD G_CURSOR FOR
            SELECT (g_t_fields)
            FROM ZTRN_REC_TIME.
        ELSE.
          OPEN CURSOR WITH HOLD G_CURSOR FOR
            SELECT (g_t_fields)
            FROM ZTRN_REC_TIME
            WHERE ZTIMESTAMP >= L_S_SELECT-LOW
              AND ZTIMESTAMP <= L_S_SELECT-HIGH.
        ENDIF.
      ENDIF.
FETCH NEXT CURSOR G_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA
               PACKAGE SIZE S_S_IF-MAXSIZE.
    IF SY-SUBRC <> 0.
      CLOSE CURSOR G_CURSOR.
      RAISE NO_MORE_DATA.
    ENDIF.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.
ENDFUNCTION.
I found some similar issue in this forum by link
Generic Extractor Delta Function Module code, but still I could not get clear answer.
Can you please help me:
1)     why there is no value for i_source , how to fix it?
2)     For the delta logic for ztimestemp, is it correct?
3)     Need I modify the entries in ROOSOURCE ?
Thanks a lot !!!

Hello Andre,
        Thanks a lot for your help. I did some change , but still does not work. Could you please help check.
Now the source code are the following, It's based on the RSAX_BIW_GET_DATA_SIMPLE, as you confirm that this also supply the update mode (full, initial delta, delta).
FUNCTION RSAX_BIW_GET_DATA_TRAININGREC1.
""Local Interface:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*"     VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*"     VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*"     VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*"      I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*"      E_T_DATA STRUCTURE ZTRN_REC_TIME OPTIONAL
*" EXCEPTIONS
*"      NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
Auxiliary Selection criteria structure
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
Maximum number of lines for DB table
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
counter
          S_COUNTER_DATAPAKID LIKE SY-TABIX,
cursor
          S_CURSOR TYPE CURSOR.
Select ranges
RANGES:
        L_R_ZTIMESTAMP FOR ZTRN_REC_TIME-ZTIMESTAMP.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
Initialization: check input parameters
                buffer input parameters
                prepare data selection
Check DataSource validity
    CASE I_DSOURCE.
      WHEN 'ZTRNREC_FM'.
      WHEN OTHERS.
        IF 1 = 2. MESSAGE E009(R3). ENDIF.
this is a typical log call. Please write every error message like this
        LOG_WRITE 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                  I_DSOURCE   "message variable 1
                  ' '.                 "message variable 2
        RAISE ERROR_PASSED_TO_MESS_HANDLER.
    ENDCASE.
    APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
Fill parameter buffer for data extraction calls
    S_S_IF-REQUNR    = I_REQUNR.
    S_S_IF-DSOURCE = I_DSOURCE.
    S_S_IF-MAXSIZE   = I_MAXSIZE.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
    APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE.                 "Initialization mode or data extraction ?
Data transfer: First Call      OPEN CURSOR + FETCH
               Following Calls FETCH only
First data package -> OPEN CURSOR
    IF S_COUNTER_DATAPAKID = 0.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'ZTIMESTAMP'.
      MOVE-CORRESPONDING L_S_SELECT TO L_R_ZTIMESTAMP.
      APPEND L_R_ZTIMESTAMP.
      ENDLOOP.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
     IF L_S_SELECT-LOW = '' AND L_S_SELECT-HIGH = ''.
        OPEN CURSOR WITH HOLD S_CURSOR FOR
        SELECT (S_S_IF-T_FIELDS)
        FROM ZTRN_REC_TIME.
        ELSE.
        OPEN CURSOR WITH HOLD G_CURSOR FOR
        SELECT (S_S_IF-T_FIELDS)
        FROM ZTRN_REC_TIME
        WHERE ZTIMESTAMP >= L_S_SELECT-LOW
        AND ZTIMESTAMP <= L_S_SELECT-HIGH.
     ENDIF.
    ENDIF.                             "First data package ?
Fetch records into interface table.
named E_T_'Name of extract structure'.
    FETCH NEXT CURSOR S_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA
               PACKAGE SIZE S_S_IF-MAXSIZE.
    IF SY-SUBRC <> 0.
      CLOSE CURSOR S_CURSOR.
      RAISE NO_MORE_DATA.
    ENDIF.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.              "Initialization mode or data extraction ?
ENDFUNCTION.
I think it already includes the important statements you suggested.
I test this FM in RSA3, for the Full load mode, it works fine. Also if I checked the debug mode in execution , it will stop in the code and let me debug.
But when I choose other mode, like 'initializion of the delta transfer' or simulation of initial delta, I always get error 'error occurs during the extraction' .. even I choose debug mode, but it could not enter the code for debug..
Till now I did not see any parameter or value for the upload mode..
Another questions is that, in RSO2, I define Ztimestamp as my delta field.. But , can I add other field as selection condition in the datasource definition, and has its range table in this function module ?
Should I change the entries in ROOSOURCE for this datasource ??
Please let me know your feedback, do you have some concret example for generic delta extraction ?
Thanks a lot !

Generic Delta Extraction via Function Module

Hello,
i need a help for a generic delta extraction based on a Function Module. As an example i take the function module RSVD_BW_GET_DELTA_DATA.
My generic delta extractor based on the field AEDAT - Change Date and i will extract purchase service orders and entry sheets.
In the sample function module the select for the extraction worked with the table ROBWQTSTAT, but this table ist empty after the initialization.
OPEN CURSOR WITH HOLD G_CURSOR FOR
      SELECT * FROM ROVERCUBE1
               WHERE COUNTRY IN L_R_COUNTRY AND
                     REGION IN L_R_REGION AND
                     KUNNR   IN L_R_KUNNR AND
                     TYPE    IN L_R_TYPE AND
                     GJAHR   IN L_R_GJAHR AND
Here the timerange calculated in form GET_TIME_INTERVAL is evaluated.
                     TSTMP   IN S_R_TSTMP AND
                     OBJVERS = 'A'.
I found the table ROOSGENDLM. In this table i found the field DELTAID with the last date of the extraction and the field REPEATID with the date for the repead-Update.
My Questions:
Is this the right way to build an generic delta extraction with an function module or must i install a coding in my function module for an update of the table ROBWQTSTAT?
Which settings are needed in the table ROOSOURCE for a generic delta extraction via function module?
Best regards
Uwe

Hi Uwe,
please have a look at https://weblogs.sdn.sap.com/pub/wlg/2415. [original link is broken] [original link is broken] [original link is broken] It might help
kind regards
Siggi
PS: We already had almost the same question here today.

What are the disadvantages of generic delta extraction

Hi all,
what are the disadvantages of generic delta extraction.
how function module generic extraction works.
Thanks,
Madhu.

hi madhu,
Pls refer ths,To learn more about Generic Extraction pls read BW350 book.
Gereric Extraction can be done in 3 ways.
If you go to transaction RSO2 in R/3 side, provide tech name for data source and click create.
you will get the 3 options.
1)From a DB Table
2)From a DB View
3)From Functional module/ Infoset Query
in first option you can directly give a standard or custom build talbe name. in second option you can select the necessary fields from more than one talbe(eiter standard or custom). In third option you will create a function module or Query to extract data. When creating function modules you can use standard function modules as a template e.g. RSAX_BIW_GET_DATA_SIMPLE.
see weblog : /people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
If you want to enable delta for generic extractor you choose the option delta and provide necessary settings.
Generic extraction is when your extraction is not satisfied by either BC or LIS/LO. It can be using a view / query/table/FM
Here the changed records can be isentified by :
1. Based on the date of creation or last change ( Delta based on 0Calday)
2. Based on the record number ( Numeric Pointer )
3. Based on time of change ( Timestamp)
real time examples would be
1. Master Record creation like customer ID creation
2. Timesheets in SAP PS
3. Invoive details / Sales Order Details.
Pls check this web logs for clear Idea.
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Have a look at these threads too.
Tables
Transfer Structure
The steps for creating extractor using Function Module.
1. Create new Function group (if you have already not done so) in Se80
2. Copy Function module "RSAX_BIW_GET_DATA_SIMPLE" with suitable name.
3. Change the code that populate data.
Following table may give you the guideline for parameters.
Parameter Description
I_REQUNR (import) BW provides this request identifier. It is a system-generated identifier in the form REQU_XXXXXX. BW uses this same identifier in all function module calls that relate to a single load.
I_DSOURCE (import) The name of the generic extractor
I_MAXSIZE (import) The maximum number of records that BW expects to be in each data packet
I_INITFLAG (import) A Boolean flag that indicates if this is the initialization (first) call to the function module
I_READ_ONLY (import) A test flag not needed in most extraction scenarios
I_T_SELECT (table) This table holds any selections from the BW InfoPackage. The function module should examine these selections and only return data that matches the selections.
I_T_FIELD (table) This table holds the fields that BW requests
E_T_DATA (table) The function module fills this table with data records. These records then return to BW as data packets. This table has the same structure as the extract structure defined in the generic DataSource.
NO_MORE_DATA (exception) The function module raises this exception when no more data is available
ERROR_PASSED_TO_MESS_HANDLER (exception) The function module raises this exception if an error occurred during the extraction. It alerts BW to check for error logs.
Change following code to put the selection fields
Select ranges
RANGES: L_R_CARRID FOR SFLIGHT-CARRID,
L_R_CONNID FOR SFLIGHT-CONNID.
Change following to populate data
OPEN CURSOR WITH HOLD S_CURSOR FOR
SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
WHERE CARRID IN L_R_CARRID AND
CONNID IN L_R_CONNID.
ENDIF. "First data package ?
Fetch records into interface table.
named E_T_'Name of extract structure'.
FETCH NEXT CURSOR S_CURSOR
APPENDING CORRESPONDING FIELDS
OF TABLE E_T_DATA
PACKAGE SIZE S_S_IF-MAXSIZE.
Some more links:
Re: functionmodule
Re: FM for G. extractor
with hopes
Raja Singh

Intervals with generic delta extraction

Hello,
Can some1 explain when do we use intervals in generic delta extraction with a good example?
Thanks in advance.
Regards,
KS

Hi,
Safety Interval Upper Limit
The delta-relevant field is a timestamp.
The timestamp that was read last is 12:00:00. Delta extraction begins at 12:30:00. The safety interval for the upper limit is 120 seconds. The safety interval for the delta request is: 12:00:00 to 12:28:00. Upon completion of the extraction, the pointer is set to 12:28:00.
Safety Interval Lower Limit
The delta-relevant field is a timestamp. After images are transferred. In other words, the record is overwritten with the status after the change in BW, for example for master data. Any duplicate records that appear have no effect upon the BW system.
The last changed timestamp is 12:28:00. Delta extraction begins at 13:00. The safety interval for the lower limit is 180secs. The safety interval for the delta request is: 12:25:00 to 13:00:00. Upon completion of the extraction, the pointer is set to 13:00:00.
refer to this link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/frameset.htm
Hareesh

Generic Delta Extraction

Hi,
In Generic delta extraction for function module which generic delta we can use
1)Time stamp 2)CAL day 3)Numeric pointer?
What safety upper limit and safety lower milit in time stamp?
When we use safety upper limit and lower limit in Time stamp and numeric pointer?
If possible give 1 scenario for this question
Thanks,

Hi,
Delta with data transfer, you do an init with all the data and marke the requests as delta. The next request will bring the new records and modifications as a normal delta.
Without data transfer, you're only marking the request as delta, the init don't bring any data. Only next deltas will bring new and modified requests.
Normally you'll use init with data transfer and deltas after it.
But imagine you already have an init of a datasource to a Dataprovider, but you'll want to connect that datasource to a new one. Since you already have an init to a first dataprovider, connect it to another new dataprovider, you won't be able to start a new init with data trasnfer to the new dataprovier (without deleting the old one). Therefore, you could bring a full of all the data to the new dataprovider, after that, delete the init flag of the old dataprovider, and create a new init without data. Therefore, the old dataprovider, since already had all the data before, you're only deleting the init flag and create it again, the new dataprovider, you already had sent the data with a full load, so marking the init flag, after that sending deltas will bring new and modified requests to the two dataproviders as what you want.
Please go through the below links,
Re: Generic extraction
Re: Generic Extraction-example
Re: Numeric Pointer Option on Generic Delta Screen
Hope it helps you,
Thanks & Regards,
Ravi.

Creation of Billing Plan data

Hi all,
I am using [BAPI_SALESORDER_CREATEFROMDAT2] for creating Sales order
and i also have billing plans data to be updated in the sales order. But i dont find any structures for populating the Billing plan data into the BAPI.
But i found the SD_SALES_BILLINGPLAN_CHANGE function module for updating the Billing plan schedule data. But this function module needs [Billing plan number / invoicing plan number] assigned to the sales order from the table VBKD.
When i create the Sales order through BAPI, the [Billing plan number / invoicing plan number] is not getting updated and i dont know how to update the billing plan for the sales order created using BAPI.
Can anyone help out how to create the Billing plan data for a Sales order?
Regards
Dhanapal S

hi Dhanapal
i ahve the same problem which u posted..
My scenarion is to create billing plan while creation of order using the BAPI_SALESORDER_CREATEFROMDAT2 but could not find any structure to pass billing plan details
pls can u let me know if u found any solution for this if so can u send me detailed mail..
i want to populate in both way header level and item level (by removing check header plan in the billing plan tab)
Pls let me know ASAP..
Thanks
anil

User Exit/Badi to change the billing plan date when create sale order

Experts,
Please advise which user exit/badi can be used to change the billing plan date wen create sale order.
My requriement is based on some rules to dynamically change the line item billing plan start date and end date when create sales order.
I tried some user eixt in MV45AFZZ, but the date got revert to the orginal date from billing plan.

Hi,
check the include MV45AFZB.
Thanks & Regards,
Sateesh.

Can it be possible to create invoice without billing plan date?

Hi Gurus,
I have made settings for billing plan in contracts. But, client wants billing plan at contract level only for the sake of reporting. Client doesnt want invoice to be created according to these billing plan.
Now, consider this scenario,
I have created contract A with billing plan values in it.
I have created sales order B with reference to contract A. There are no billing plan values in sales order B.
There is no delivery and PGI.
Now, when I try to create invoice with reference to sales order B, system doesnt allow me to save the same and says "No billing plan date found".
Will it be possible to create invoice irrespective of the billing plan in contract?
Please guide.

Hi,
Then in that case i would advise not to use billing plan for your contract document type.
If you intend to create a sales order in reference to your contract document which has billing plan type attached, then in that case you need to maintain billing plan for your sales order document too.
Reward if helpful.
Regards
Ravi

To track which line item the billing plan date changed.

Hi All.
I have a requirment of tracking changes done for the billing plan date and whenever i change the billing plan date it will be reflected in the FPLA table. But i was not able to track to which line item of the subscription/order the billing plan date changed.
In the FPLA table there is a relation to the VBELN(subscription/order) only not POSRN(line item) is there.How can i track to which line item it got changed.
Thanks for your help.
Thanks,
Neslin.

Hi,
There should be entries in FPLTC for FPLNR found in table FPLA. Try from SE16, enter FPLNR preceded by zeros so that the total length is 10 and execute.For example, FPLNR is 10, enter 0000000010.
Hope it helps.
Regards,
Nupur

To track the line item to which the billing plan date changed.

Hi All.
I have a requirment of tracking changes done for the billing plan date and whenever i change the billing plan date it will be reflected in the FPLA table. But i was not able to track to which line item of the subscription/order the billing plan date changed.
In the FPLA table there is a relation to the VBELN(subscription/order) only not POSRN(line item) is there.How can i track to which line item it got changed.
Thanks for your help.
Thanks,
Neslin.

Hi,
There should be entries in FPLTC for FPLNR found in table FPLA. Try from SE16, enter FPLNR preceded by zeros so that the total length is 10 and execute.For example, FPLNR is 10, enter 0000000010.
Hope it helps.
Regards,
Nupur

Billing plan date should be same as invoice date as per factory calendar

Hi,
We have two contracts, one is having billing plan material and another is having no billing plan material of same customer.When we go for the billing, as because these having all the header fields same it should give one single invoice of those two contracts,but its giving two invoices means the invoice splits.I check it and found, due to different billing date the invoice splits.If we go for VF04 we can force the billing date as same,but they are is a one batch running for this invoice.My invoice date of two contracts is 22.06.2014 which is factory calendar date and billing plan date is 26.06.2014 which is contract start date.My client is asking that can we get billing plan date same as invoice date as per factory calendar in standard to get single invoice? Kindly suggest me where is the settings.
Thanks in Advance
Regards,
Braja

Braja,
Check this
Goto the billing plan tab in the corresponding line item and check the rule that is determined. Now go to the configuration of this rule table by using the path
SPRO>SD> Billing> Billing Plan> Define rules for determining dates and choose your Applicable rule and click on the details.
There you will see the Calendar ID field where you will have to maintain the applicable factory calendar. I think this should work and your billing date on the item relevant for billing plan should be the same as the other item.
Hope this helps,
Ravin

Billing plan dates in Sales order

Hi Experts,
i am creating a sales order and i need to populate the date in billing per from Ztable as per payment terms.
1 . the enhancement i am using is V60F0001 - > EXIT_SAPLV60F_001 and inside i have kept a break point. but it is not stopping. i have also created the project in CMOD and assigned this enhancement but still it is not working.
2. is there any enhance ment or user exit i need to use.. to change the date in billing plan for sales order.
is there any BADI i can change the billing plan dates.
Thanks in Advance.

Hi,
Yes this is std behaviour.
You need to do some enhacement to get this working.
BR

Billing Plan Data not getting copied from Contract to SO

Hi ,
I have a Business requirement in which i ham supposed to create a Contract and then release/sales orders with reference to this contract. Whle creating the SO, the header billing plan dates are not getting copied from COntract to Sales Order.
Please guide me on how can this be done.
Regards,
Madhav

Hi,
plz check your copy controls VTAA from contract to release order ,under the contract item category there is Field-FPLA check what is the routine that is assigned.
you can either use routine-401 or 402

Generic delta extraction using function module

Hi.
I have a generic datasource , extraction being performed by a function module. The extraction works fine in full update mode. The extract structure has a timestamp field.
I have enabled generic delta using this field(i.e., marked this field in RSO2). I understand that with this setting, I should be able to get delta data when I do a delta request. But it does not seem to happen.
I checked the ROOSPRMSC table for the last(local) timestamp stored there. Now when I do the delta upload I expect to see only those records which are younger than the stored timestamp of last upload.
But I still get the entire set of records.
Questions are :
1. Do I need to explicitly code for fetching the delta in the extractor ?
2. If not, what could be the reason why generic delta is not working ?
Thanks and regards,
Anuradha

Hi GFV,
I read-up all the forum entries on this topic but could not find anything specifically dealing with my problem. I have browsed through the how-to paper on generic delta as well.
I am quite sure that we don't need any special coding in the extrator for generating delta generically. Even the how-to paper does not mention that.
I have used the FM RSAX_BIW_GET_DATA_SIMPLE as a template
for my extractor(as suggested by F1 help in RSO2). This FM does not even have the i_updmode flag in its interface.
Thus this function module always does full extraction and I expect the system to take care of delta using the timestamp field.
Are these assumptions incorrect ?
Regards,
Anuradha

Generic Delta Extraction (Bill Plan Data)

Similar Messages

Maybe you are looking for