Generic Extractor for MCH1 data

I need to extract data to BW in which the source of data is the table MCH1. I could not find any content extractors - does anyone know if one exists?
Thanks

Hi,
Kindly have a look at below thread,
Extraction of Batch Characteristics/Classification to BI/BW
I hope this thread will help you.
Regards,
Mani

Similar Messages

Looking for generic WebService for update date & time in my C# WinForm program

hi
looking for generic WebService for update date & time in my C# WinForm program
thanks

hi
looking for generic WebService for update date & time in my C# WinForm program
thanks
Hello,
I agree with Cor that since this forum is for issues related to winodws form controls and features, but this issue is mainly related to the webservice which is working for updating time, you could consider posting this issue on other site, or you could
also consider creating your webservice by checking this document
Your first C# Web Service.
If you get any issues when create your webservice, you could post this issue in the following forum.
http://forums.asp.net/28.aspx/1?WCF+ASMX+and+other+Web+Services
Regards.
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Generic delta for master data

Hi All,
I am trying to create a generic delta for master data "equipment" . table in SASP is "EQUI". I am choosing ALE delta . in that I have to provide table name and "changed doc object' . when I give "equi" as table name and "aedat" (changed on ) as "changed doc object' -
it is throwing error.
also when I tried for time satmp /calday delta , the delta doesnot work when changeed are done. don't know why?
Any idea what has to be given in these fields.
Regards,
Dola
Edited by: Dola das on Mar 17, 2010 12:55 PM

Hello,
TCDOB is a table where you need to maintain entries for Generic Detla.
Please goto SE16 : enter table name TCDOB
In the selection Screen Enter Object as EQUI and check the Number Of Entries..
I guess you need to maintain the number of fields on which the change is dependent for Detla ()
I treid creating the same Datasource Using Ale Detla
It worked and saved without errors :
i have the following entries in TCDOB table
OBJECT          TABNAME
EQUI            EQKT
EQUI            EQUI
EQUI            EQUZ
EQUI            FLEET
EQUI            ILOA
Please tell me your count and entries..
so that we can discuss this Further
Also if you find if there are no entries then you can Go to SCDO tcode and maintain entries with respect to change object.
waiting for your feedback
Regards
Nitin Bhatia
Edited by: Nitin Bhatia on Mar 18, 2010 6:44 AM

Generic Extractors for HR Reports using views and Infoset Query

Hi Friends... I am working to come out with the HR reports in BW for the HR reports which are already there in R/3. The HR reports in R/3 are created based on Infoset Query.I could not find any standard business content cubes which can give me these reports.
1)So please can anyone give me step by step approach so to create a generic extractors based on Infoset Query.
2)And also how to populate the data into the fields of the generic extractor which is created by Infoset Query( Please provide any sample ABAP code if available)
3)can anyone give me step by step approach so to create a generic extractors based on View/Table.
4)And also how to populate the data into the fields of the generic extractor which is created by View/Table( Please provide any sample ABAP code if available)
Thanks

Hi Kalyani,
We normally go for View or infoset when the data to be fetched in BW is distributed in different tables in SAP R/3.
Had the data been available in one table we can easily build our datasource on that table but if there are more tables then its not possible to do it without Views or Infosets. You can use Function Modules to build your datasource in case it involves complex logic to figure out the data from various tables.
Depending upon the table relationships we create view and include various fields from these tables in that view. Same is with the Infosets, you can have more flexible options like Outer Join, left outer Join etc.
Regards,
Pratap Sone

Generic Extractor: enriching GL Data with Purchasing Data

Experts,
This is my first time with Generic Extractor.
Requirement:
We have a requirement to enrich GL data with Purchasing data via the Material Document Number.
I need to provide this upto to the datawarehouse layer wherein another team will take over.
Solution idea:
Material Document is not part of the datasource 2LIS_02_SCL.
a. Should I enhance this datasource to include material number OR
b. Develop a concept to create a generic delat enabled extractor that pulls data from EKBE, GR and IR information.
In EKBE multiple material documents can exist per PO. The extractor returns 2 record per PO (before and after image) with the updated information.So if we have the first GR with Material document 901 and then a second GR with material doc 902 the extractor loads 3 records. New record, Before image and after image and the only one stored in BI is the after image. material doc would have value 902 if enhanced.
For the generic extractor approach the the ability to load deltas is crucial, since the EKBE table is very big. Maybe
"CPUDT-Day On Which Accounting Document Was Entered" and "CPUTM-Time of Entry" can be leveraged as delta hook.
Any ideas???
Thanks,
Jain

No one answered

Generic delta for master data table MEAN

Hello all,
How should the settings for my generic data source look?
It's masterdata attributes and I'd like it to be delta compatible. The basis for the data source is table MEAN in R/3.
Could someone please specify the settings that should be applied in SBIW (Should for example a numeric pointer be used or is the date better for handling of the delta queue? How should the security ranges be set etc.?)?
Thanks,
Fredrik
Message was edited by: Fredrik Carlsson

Hello,
TCDOB is a table where you need to maintain entries for Generic Detla.
Please goto SE16 : enter table name TCDOB
In the selection Screen Enter Object as EQUI and check the Number Of Entries..
I guess you need to maintain the number of fields on which the change is dependent for Detla ()
I treid creating the same Datasource Using Ale Detla
It worked and saved without errors :
i have the following entries in TCDOB table
OBJECT          TABNAME
EQUI            EQKT
EQUI            EQUI
EQUI            EQUZ
EQUI            FLEET
EQUI            ILOA
Please tell me your count and entries..
so that we can discuss this Further
Also if you find if there are no entries then you can Go to SCDO tcode and maintain entries with respect to change object.
waiting for your feedback
Regards
Nitin Bhatia
Edited by: Nitin Bhatia on Mar 18, 2010 6:44 AM

Standard Extractor for appointment dates in CRM

Hi guys, is there any standard extractor for the appointment dates in CRM !? Thanks you guys !

Hi Robert, thanks for your reply but I was looking for a standard CRM-BW Extractor, I didn´t find anything so I implement CRM_BWA_MFLOW badi, set an append to the structure of the 0CRM_SRV_PROCESS_H extractor with all the date appt_types - date_from and that´s it. it works for me. Thanks !

Generic Extractors for LO

Hi,
Has anyone attempted to write their own generic extractors to mimic the LO process because the results from this module did not meet their requirements? Would you recommend doing this?
Thanks
"Good people do not need laws to tell them to act responsibly, while bad people will find a way around the laws." ~ Plato (427-347 B.C.)
"Forgive your enemies, but never forget their names." ~ John F. Kennedy (1917-1963)
Forgivenes - Just get out of my life and spare me the anguish of pitying you ~ Anonymous Author
Message was edited by:
Ellen DeGeneres

The LO process of extraction cannot be mimicked. If the requirement is such that you need more/different fields then you have the following options.
1. If the fields are in the extract structure of the datasource in question then just add the fields to the datasource and use the LO extraction process.
2. If you need to add some fields which are not in the extract structure of the datasource then add them to the datasource and use user exit to fill them.
3. If the need is for a completely different extractor. Then creat the extractor in RSO2,
More detailed info is in the weblogs by Robert Negro.
Hope this helps.
Bhargava

Generic Java for Oracle Data Integrator 10g (10.1.3.5.0)

Hi,
How can I install the Oracle Data Integrator Client in my MacBook. So the generic version should be the right one.
But there are versions for windows, linux, solaris, HPUX and AIX.. but no generic java version.
The version 10.1.3.4.0 has an generic version.
How can I fix this issue, since I tried the linux version but doesn't install.
Thanks.

Hi,
Install the 10.1.3.4 and make an "manual install" after that. It's means copy the oracledi directory over the old oracledi directory.
There is detailed instruction on install manual...
Did you already tried this?
Cezar Santos
[www.odiexperts.com]

Using BAPI in extractors for feeding data to BW

Hi,
I have a requirement where ,I need to load the Data.
Presently They use BAPI_ALM_ORDERHEAD_GET_LIST to download the data into XL sheet.
Now New requirement is to insert this BAPI into function Module that will act as extractor that will feed BW using SBIW (Extraction By function Module).
Client will not use all the fields that comes from the BAPI , They will select few of them
the extractor can be a total Abap (using the BAPI) or can be also starting by Extraction from DB View then enhanced by the BAPI .
Can U please let me know the easy way for it.
Thanks in Advance.

If I were to do it, I would make a function module extractor which calls the BAPI and populates the extract structure/table.

Generic Extractor on DB Table without Date, Time stamp

Hi all,
We have requirement of creating a generic extractor on the table which doesnt have date or time stamp in the data field. The only option availabel is to extract from Document numbers.
And we cant put the extractor mode to "Read from view" because the table contains Currency field which refers to external table for currency key.
The moment we change the extractor mode from Extraction from view to Extraction from FM the option "Numeric pointer" gets hidden.
What shall we do in this scenario ?? Pls advice.
Thanks.
Regards
Nimesh

Hello Tapan, Prakash
Prakash : Currency key is needed in BW .
Tapan : I was just trying diff. options i.e. extraction from view and FM . Problem with Generic Extractor is that i dont have any date fields getting updated in the table. The only field that can be used for delta is document number. And Generic extractor only allows date or time stamp option , its not allowing numeric pointer if one reads from FM.
Regards
Nimesh

Text load af vendor sub range - generic extractor

Hello BW experts,
I have created a generic extractor for transfering vendor sub range texts into the text table of an info object. However the text doen't end up in the table..
It transfers all included lines in the source table to BW, but I get the error message that some posts are duplicate in the PSA. Nothing ends up in the destination table... Can certain lines be erased in the PSA? Could this really be the reason for the difficulties to load?
Please help!!!
BR,
Fredrik

Hi Fredrik,
In your InfoPackage > Processing tab > choose Only PSA and Update Subsequently into Data Targets and also Ignore Double Data Records. This way you will not get the duplicate entries error message and the data should load.
Hope this helps...

Generic Extractor - Design

Hi All,
Ii have built a generic extractor as Master data, it has fields like MATRNR, WERKS, DESC and PRCTR. Now I want to load it to another IOB. Should I create an info object with attributes such as WERKS, PRCTR and DESC for a master data object ZMATNR?
My concern is can I use the existing IOB like 0PLANT, 0PROFIT_CTR as attribute to my Z-object ZMATNR, C18, no text, with ZDESC as another text item. Though it is not a typical master data situation (Lots of duplicate materials accross plants are possible). I don't want to create a DSO to avoid activateion time load issues.
Am I right? Any second openions?
Thanks,
Alex (Arthur Samson)

Thank for all.
I completed the design and it worked well.

Data Source for BSEG Data base table

Hi Every one,
I need to create a data source for the data base table BSEG (Function Module Extraction).
I have followed below steps.
I have created extarct structure which contains all the fields of BSEG Data base table.If I save the data source I am getting error.
If I remove all the currecy fields from extract structure, I am able to activate the data sorce.
So Could you please explain me how to extract currency fields.

Hi,
Firstly, can you explain why you need a generic extractor for BSEG? There are already 2 datasources for BSEG, they are:
0FI_GL_4
http://help.sap.com/saphelp_nw70/helpdata/en/0c/b4973c115a6f3ae10000000a114084/frameset.htm
0FI_GL_14
http://help.sap.com/saphelp_nw70/helpdata/en/49/5700570223413085021a8b4ef1087a/frameset.htm
To use 0FI_GL_14, you should use the new GL in ECC side.
On the other hand, for your problem, your problem may occur if you did not give the reference unit field of your currency field in your extraction structure. when you double click the the currency field, you will see the ref. field, give the reference unit field in this area.
Regards.

0WBS element (external format) as append field in generic extractor?

Hi Guru's,
we use an generic extractor for our CO-PA data, as a join of different tables. Now I get the issue with this internal format of PSP element. It is of NUMC 8 and my basic data PSP element is CHAR 24. As they are not matching I want to add the POSID as an append field. But how to do this?
In table PRPS I found the Include PRPS_INC an thought about using this in my extract structure? Is this possible? How do I need to go on and to simply have my additional field - with content! - in my extract structure?
First I used an append and put in my include. As there are no fields extracted to BI I think this is wrong!? How can I delete my append?
Thanks

Hi Siggi,
I have not created an special Append on the VEKP. I created an generic extractor on the VEKP. All fields of VEKP are available and I can hide or choose selection-field for all of these fields. No problem.
i created an append on the extract structure via RSA6 - enhancement. I know that after generating the generic extractor with RSO2 all settings done in former times in RSA6 are lost. But, my problem is: I can not see any of the fields I put into the append. They are not there. Not in ROOSFIELD and following not in RSA6. And that's the problem.
Thanks for your support.
OJ

Generic Extractor for MCH1 data

Similar Messages

Maybe you are looking for