Generic Service - Charts on Home Page...Sometimes?

Greetings all -
I am using OEM 12.1.0.2, with Oracle Beacon(3.9+) 12.1.0.2
Here is the scenario -
I navigate to 'targets - services' off the top drop down.
I select 'beacons' off the 'Sevices Features' drop down.
I select 'add' - Give it a name (Bob_Beacon) - select an agent - next to 'Enable Message ID Request Header' I select Yes. Click create - (receive message Bob_Beacon was created successfully and ok that).
Now, I expand the agent where I created the Beacon - and click on Bob_Beacon.
I go to 'Monitoring Configuration' from the beacon drop down (just below Bob's name).
The Monitoring Configuration clearly shows 'Enable Message ID Request Header' set to FALSE.
I can change it to 'TRUE' and save...it does seem to stick.
So, I continue...back to Targets -> Services off the top drop down.
Here click add. Give it a name - BobService, select timezone, and next.
Leave availability at 'based on service test' and next.
For Service Test, I select HTTP PING, give it a name(BobHTTPPing), change freq to 3 min, and supply a url. Finally Next.
Beacons - click add, put a check next to Bob_Beacon and select, then next.
Performance - leave total time, but click add - should show 'status' - click continue, note chart on homepage says 'total time'. click next.
Leave usage metrics as is - just select next.
Select Finish.
So here's the rub. In a day or two, I come back to grid to check on the new service. Some, show 'no data is currently available' for chart on the home page of the service. Others show data. I can track down no rhyme or reason why some do and some don't.
Are there additional steps required? I haven't defined SLA calendars for any, (those that show charts, and those that don't.) Those that don't show are chart on home page, also display empty charts on the the 'charts tab.' But if I go to the 'Test Performance' tab, a chart is visible with data.
Plz try the steps listed here, and let me know if you receive the same results.

As a followup -
It is interesting...the latest one.... BOBSERVICE indeed has charts on the home page & charts page.
I actually created that one yester, while doing the post, to ensure the steps listed were accurate.
But many others don't have the charting.
I can post screen shots, etc... of setting one up...
What 3rd party website works well for uploading screenshots and posting the image links here...
Do advise...
D

Similar Messages

  • Program Container Timeline Gantt Chart Applet (Home Page)

    This Applet "Program Container Timeline Gantt Chart Applet (Home Page)" is present in 7.5.3.x version when searched in Tools but the same is not present in 8.1.1.x version.
    1. Has this been replaced by any other applet with different naming convention ?
    2. Since this is not present in the 8.1.1.x repository itself is there any functional change ?
    3. If customer wants to use this applet how should he proceed so that all the controls work in this applet ?

    This Applet "Program Container Timeline Gantt Chart Applet (Home Page)" is present in 7.5.3.x version when searched in Tools but the same is not present in 8.1.1.x version.
    1. Has this been replaced by any other applet with different naming convention ?
    2. Since this is not present in the 8.1.1.x repository itself is there any functional change ?
    3. If customer wants to use this applet how should he proceed so that all the controls work in this applet ?

  • Employee Self Service - configuration of home page

    I have configured the Area Group page through the IMG, however the changes are not appearing on the ESS Home Page.  How do we get the config changes to appear in the home page?  Help!!!
    Thanks,
    Janet

    HI Nancy,
    Have you added this Area Group page name in the iview ?
    Say for example, you have created a Area(Personal Information) and have assigned this area to the area group page(SAPDEFAULTESS_ERP2005)
    Now, go to the iview(personal information) and look for the property "Application parameters'. You need to add your area group page name here.
    Ex: sap.xss.menuarea=EMPLOYEE_PERSINFO_ERP2005&sap.xss.menuargrp=SAPDEFAULTESS_ERP2005&sap.xss.menuhdr=SAPDEFAULT
    cheers,
    sathya

  • Bug i hope mozilla can fix. Home page sometimes gets screwed up. Due to Software idiots who tamper with it and other sites... let me explain...

    Mozilla is awsome, but there comes often times such as now, DivX software asked me if i wanted to make BING my default home page. I of course said no. Well it set it to that anyways in firefox. Gee, thanks Divix and thank you microsoft for joining the ways of many adware jerks out there. Well anyways, I wanted to set it back to firefox default. Well i can't. I click that button over and over click save it keeps it at bing. I really hate bing. I like google, but i also love that firefox logo i get each time i click the home button. So now like usual, there is no way to set it back the way it was no matter how often i restart the computer the browser, click the "restore to default button" i'm now once again stuck with a seach engine on the firefox page that i hate so much. The only way to fix this is to uninstall firefox, including all add-ins and plugins, and all private stuff, to completely remove it, then reinstall it. man i am so tired of this just cuz some developers are too lazy to respect the work of other developers and consumers to now force their gibberish into my favorite web browser. Can Mozilla possibly fix this so there is no possible way any developer could ruin it for me any more? I really just like the fresh default page, with the Firefox logo and Google as default. Thanks.

    There are many loaders that change settings without asking.
    Book mark this;
    '''Download the [https://addons.mozilla.org/en-US/firefox/addon/searchreset/ Mozilla Search Reset]''' {web link}
    This add-on is very simple: on installation, it backs up
    and then resets your search preferences and home page
    to their default values, and then uninstalls itself. This
    affects the search bar, URL bar searches, and the home
    page.
    And check this out;
    '''[https://addons.mozilla.org/en-US/firefox/addon/settings-guard Settings Guard for Firefox]''' {web link}
    Detects and resets changes to settings that are frequently done
    by add-ons and application installers.

  • ABAPwebdynpro iview in EP7.0 , ESS Home Page Service is not showing up

    Hi Experts ,
    There is a problem with my abap webdynpro iview when i assign to page and give PCD path in ESS Area page service using IMG .clicking on the service which is there in ESS homepage the iview is not loading when we refresh the iview using the options provided by that iview it is showing up .
    we are using EP7.0 , created sap webdynpro abap iview
    passing name space : sap and mentioned correct Application parameters ...
    and hided worksets on the ESS Home Page  ESS .
    when i assign the iview to page and to workset -> role -> user it is showing up
    only when i assign to Area page in IMG and hiding the workset in home page , iview is not loading (Refreshing).
    may be if any one knows how to refresh the iview automatically using any iview properties?
    please any one help me on this , how to solve this issue
    points will be awarded for sure ...:)
    Thank You very much in Advance ...
    Neeru .

    Thanks a lot for ur fast response ....i tried with all options , and found the solution
    that is in ESS 1.0 with EP7.0 , to create an icon with a service in ESS home page there should be a webdynpro java page , it will not accept portal page , so i created webdynpro java application and gave the pcd path  of abap webdynpro iview in that ,  created an webdynpro iview and page along with that  now it is working perfectly .
    this is what i came to know after a good research ....please experts correct me if i am wrong ?
    I Appreciate the sdn and who are all helped me for this
    Regards
    Neeru .

  • Home Page Framework issues with Exit Button

    Hi,
    We are just implementing the ESS package within the new EP7 portal using ECC6.0. We are having a issue when we select a service within the Home Page such as Address, the iview gets displayed which brings up the different addresses which can be edited. On choosing for example the permanent address edit option the new screen appears where you can modify the details if I choose to exit from here, rather than taking me back to the initial page, a new page gets opened with the default to the Personnel Information Page. Could someone please advise what is currently wrong here as I have checked the resource link and service link and all seems to be pointing to the right pages.
    For example on choosing the exit the below url gets displayed
    http://sapasp02.allegiance.com.au:57000/irj/portal?navigationtarget=roles%3a%2f%2fportal_content%2fcom.sap.pct%2fevery_user%2fcom.sap.pct.erp.ess.bp_folder%2fcom.sap.pct.erp.ess.roles%2fcom.sap.pct.erp.ess.employee_self_service%2fcom.sap.pct.erp.ess.employee_self_service%2fcom.sap.pct.erp.ess.area_personal_information%2fcom.sap.pct.erp.ess.area_personal_information&webdynpronamespace=sap.com/pcui_gp~xssutils&webdynproapplication=xssmenuarea&dynamicparameter=sap.xss.menuhdr%3dsapdefault%26sap.xss.menuargrp%3dsapdefaultess_erp2005%26sap-epcm-guid%3d39ea108a9fb5b731f3a2d1fc55795e533048dd247f264b298fc87f91af584e86%26sap.xss.menuarea%3demployee_persinfo_erp2005&currentwindowid=wid1234821930941&navmode=2
    Regards
    Stafford

    Hi Jithu
    If i understood correctly your requirement, check for the WDA service, that the field "Service Type" has the value "WDABAP".
    Also, for the corresponding resource, check that the "URL of PCD" property matchs with "PCD Location" property of HCM Process Overview page, but entering by your Role (check note [1234273|https://service.sap.com/sap/support/notes/1234273] for more info about this process).
    Regards!

  • SRM CCM 2.0  Not accessing the edit/create/approve page  etc from home page

    Hi
    After doing all configs/user roles and activating services , the catalog home page is being displayed . But unable to navigate in Approve/Edit/ Create/display/Edit supplier cat/ Trex admn tool/ . In short when we try to open any of the tabs  getting 'page can not be displayed' error.
    Please address the issue.
    regards
    PHan

    Hi,
    If you are using the CCM roles for the first time did you generate profiles for your roles?
    Best regards,
    Sridhar

  • Add button on Service Calender home page grid

    Hi ,
    We tried to add the button on Service calender home page grid but not able to add it. We tried page rule, in that we used the
     <PageRule Address="/sm/home_apptbook.aspx" /> but it failed to add button.
    We also tried to add button using Mscrm.AptbookTab but still not succeeded.
    So any one have solution on this.
    Thanks!

    Post Author: jsanzone
    CA Forum: Deployment
    Michelle,
    Thank you for noting your observations on the new OnDemand button and link to the home page.  Several admins have been wondering how to disable this new feature and I've been working with BusObjects Tech Support for a .NET on IIS solution.  Your posting looks like what I was provided from TS on an initial effort, however, TS has updated as follows:
    For .NET on IIS
    In the CCM stop the World Wide Web Publishing Service
    <Install Path> below refers to the location Business Objects is installed.  By default it is: c:\Program Files\Business Obejcts\BusinessObjects Enterprise11.5\
    Go to <Install Path>\Web Content\Enterprise115\Infoview
    Open the web.config file in notepad or other text editor.
    Search for the following: supportOnDemand
    Change true to false
    Save and close the file
    In the same directory open the home.aspx in notepad or other text editor.
    Search for the following: ondemandlink
    Go up 2 lines to the <tr> tag.  At the beginning of this line type <!--
    Now go down to the </tr> which should be 4 lines down.  Add --> to the end of the line after the </tr> tag.
    Now search for the following: ondemandlabel
    Go up 3 lines to the <tr> tag.  Place <!-- at the beginning of the line.
    Go down 4 lines and add --> to the end of the line after the </tr> tag.
    Save and close the file.
    Start the World Wide Publishing Service in the CCM.
    Per advisement from Tech Support, they do plan on publishing this as a Knowledge Base article sometime soon.

  • Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

    Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

    That issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • My Iphone4 Home button sometimes work nicely and sometimes it stop working. India Apple care says they cant give me even paid support because i bought phone from Australia. i don't know what to do. i m disappointed with the product and service support

    My Iphone4 Home button sometimes work nicely and sometimes it stop working. India Apple care says they cant give me even paid support because i bought phone from Australia. i don't know what to do. i m disappointed with the product and service support

    When you buy an iPhone in the U.S. it's locked to that country with the carrier you bought it for.
    If you bought the device unlocked in the U.S. it's unlocked, you can use it on any carrier. Even one's outside the country.
    If you want to do a repair on a device you bought in the U.S. and your using it in another country, you must send it back to the U.S. Why? That's where you bought it from.
    AppleCare Protection Plans and AppleCare Limited Warranties are registered to your hardware.
    Your hardware is your iPhone.
    Wherever hardware that was bought then that's the country it was designed to be used in and that's where it was manufactured.
    Apple is very localized - if you call U.S. tech support, you'll speak to somone in your country.
    So, what does all this mean?
    In order to do a repair, you need to send it back to the country you got it from.
    And we're all customers like you. We understand that you're upset, but Apple isn't gonna bend the rules to one individual.
    Policy is policy. Get over it.

  • Customize Web Service Home Page in OC4J

    I am using OC4J 10.1.2, I have developed a webservice using JDeveloper 10.1.3 by selecting j2ee sebservice version J2EE 1.3 (Oracle) Web Service. On accessing the webservice using the browser I am getting the WebService Homepage with the option to access the methods exposed. How can I disbale the home page or customize it.

    Not sure if this is an exact match to your problem, but I've had problems with systems based on WebAS 7.00 truncating the hostname when generating the url for the WSDL.  You may want to check the hostname is complete.
    Regards,
    Nick

  • Web Service Home Page Test

    Hi everyone
    we are on ECC5. I have created a simple web service from a RFC, but when I try to test the home page in trnx wsadmin, I get the following error :
    Cannot download WSDL from
    We have created the J2EE server, but it seems like the server can not connect back to the application server (SAP) when it tries to download the WSDL.
    Thanks for your assistance

    Not sure if this is an exact match to your problem, but I've had problems with systems based on WebAS 7.00 truncating the hostname when generating the url for the WSDL.  You may want to check the hostname is complete.
    Regards,
    Nick

  • When reading my downloaded paper the Safari page sometimes comes up and I have to press the Home button and start all over again but same thing happens.  I even made sure the the paper download was the first thing I did on my Ipad

    When reading my downloaded paper the Safari page sometimes comes up and I have to press the Home button and start all over again but same thing happens.  I even made sure the paper download was the first thing I did on my Ipad and that no other apps were open.

    Have you tried a Reset (No Data will be Lost)
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • I get a no service msg and a USB connected to itunes icon on the home page. How can i get past this so i can access and unlock my phone?

    i get a no service msg and a USB connected to itunes icon on the home page. How can i get past this so i can access and unlock my phone?

    DFU Mode /  Recovery Mode / Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • What is Home page frame work services?

    Hi....
    In SPRO-PM-ESS-general settings-home page for self services-resources-Define server for resources.
    In this node we will give Directory path (Field name). Which value we can give in this?
    Under HOME PAGE FOR SERVICES we give many technical names and PDC path in portals.
    where we can find what value we should give in the fields?
    Thanks,
    Potru

    Please check the following links:
    http://www.slideshare.net/Juanfe1978/ess-xss-homepageframeworkecc50erp2004
    http://www.bi-practice.de/wiki/images/4/40/ESS_XSS_Homepage_Framework_ECC_50_ERP_2004.pdf
    Regards

Maybe you are looking for