Generic Service error in HCM Processes and Forms
Hi ,
I have created generic services and they are working fine in the Development system .But when it is moved to testing system , all the services are active. But it still reports that the none of the generic services including the standard SAP delivered generic services are inactive.
Did anyone face this problem ? How to resolve this issue , any help in this regard would really be helpful.
Thanks,
Saujanya
I have resolved the issue by regenerating the generic services.
Similar Messages
-
WS17900260 - Task TS17900108 resulted in error, in HCM Processes and Forms
Hi,
I have designed a HCM process and workflow. In custom workflow ,WS17900260 (TS17900108) has been used to save data. In this step it is resulting in error and shows the below message in "Step History" tab. No message in Message Tab.
Work item 000000172044: Object CL_HRASR00_WF_COMPONENTS method SAVE_FORM_DATA_TO_DB cannot be exe
Message no. WL821
An exception with the type CX_HRASR00_PROCESS_MODE LLING occurred, but was neither handled locally.
I tried executing the associated method and I did not get any error. Please let me know if anyone has faced this issue and how it is resolved.
Thanks,
SriHi Sri
Expecting a prompt answer in 2 hours time is a tad too demanding for all of us
We try to help you based on our experience and if we do not have it, we just wait for the right one to respond.
It is not that I have experience in HCM Processes and Forms, but a little bit of googling to help you gave me the following:
1) SAP Help for your task TS17900108 states that it has the same requirements for binding as that of task TS17900107 .... check the latter half of the page here:
https://help.sap.com/saphelp_erp60_sp/helpdata/en/42/f28f8a1e5132c3e10000000a1553f6/content.htm
2) If you check TS17900107 binding requirements, it needs certain necessary parameters which may be causing the issue. Check the mandatory requirements here:
https://help.sap.com/saphelp_erp60_sp/helpdata/en/42/f2cf2c249b3268e10000000a1553f6/content.htm
Also check for authorizations
3) See how another user solved the issue with the same method here:
http://scn.sap.com/thread/1753027
4) See the possible advice for a similar issue with task TS17900107 (which is kind of similar to your task)
Novice in HR forms and processes workflow - help in usage of TS17900110
I checked various threads and the common link is that it all depends on your system and the bindings or the custom functions called within. Also do check for authorizations as mentioned in the first link from Help.sap.com
I am sorry, I cannot give you further details because I myself do not have experience in HCM P&F. I am sure you too can google further from here, or we can be a little more patient for others to reply (I understand that some issues are critical and need immediate resolution, but we all are busy in our own projects and sometimes are not able to reply immediately).
Regards,
Modak -
Workflow Errors in HCM Processes and Forms
Team,
we are facing one issue related to HCM Process and Forms. Recently we have upgraded our HR Package after which workflows used in HCM Forms stopped working though user who is initiating the process has SAP_ALL. We have noticed that workflow is throwing exception at the very first step i.e. PROCESS while importing data container.
What could be the reasons? Appreciate your replies
Thanks & Regards,
Jitesh TalrejaThanks Arpit,
WF-BATCH already has SAP_ALL. Do we need to assign some additional roles or profiles to this user?
Log says error reading Process Object
Thanks,
Jitesh -
Error in HCM Process and Forms
Hi All,
When I test my HCM process and forms I got the error "Complete the required entry field "Pers.administrator" (P0001-SACHP) " but I've not used this field in my form. I got this error while testing my process. Could you please tell me how to solve this issue?
Thanks and Regards
BasheerHi Everyone,
As instructed above, I configured the field GBDAT infotype 0002 to the table V_T588MFPROPC, and it got rid of the error message, but it has not complete resolved the issue, I am reciving the following warning:
Entries in display field "GBDAT" are ignored
Diagnosis
You entered a value in the "GBDAT" field. However, the field is customized as display-only and not for user input.
System Response
The system restores the content of the field as it was before your input.
Procedure
Contact your system administrator.
Procedure for System Administration
User entries in the "GBDAT" field () do not make sense. Correct the settings for the user interface
Anythoughts?
Thanks in advance,
Heather -
HCM Process and Forms Generic Service Error
I tried creating a generic service for HCM Process and Forms using enhancement spot HRASR00GENERIC_SERVICES. After I created a custom implementation I then added the filter value = ZH_FORM_HEADER (my generic service name/definition). When I try to go into the configuration and add the generic service and do the binding of the fields I get an error stating "Generic Service ZH_FORM_HEADER has more than one implementation." I have double checked and only one implementation is using that filter value and there are no implementations with a blank filter value that belong to this enhancement spot. Any suggestions on what could be wrong? I can create generic services and the implementations of the BADIs just fine in our sandbox just not in the development instance. Also, I have tried searching on OSS and SDN and couldn't find any messages associated with this problem.
Hi :
We are having a similar problem. Our generic service works OK in development system. But after we transport the service to Test system, the service haveing the error " Generic service XXXXXX has more than one implementation".
Have you solved your problem? Can you tell us the solution?
Best regards!
Wayne -
How to create Generic Service in HCM Processes and Forms
Hi Friend's,
Can you tell me what are the steps to create Generic Service in HCM Processes and Forms and also tell me how to link Generic service with BADI.
In SPRO, I defined one customized generic service, but i cant able to implement the generic service to BADI. Moreover it's asking for Composite Badi Implementation name.
So tell me the steps which guide me to create that.. Waiting for your replies....hi ramesh,
use HRASR00GEN_SERVICE_BASIC create ur own.
Madhukar -
Generic service to populate fields in HCM Processes and Forms
Dear Friends,
I am developing generic service to populate some fields in HCM Processes and Forms. Please let me know whether i need to develop a single service for each field in the form or is better to write one generic service for all the form fields.
Thanks in AdvanceHi Sapient,
By right, generic service means to be generic so that it can be re-used in any HCM forms thats needed the field/validation from the generic service.
Unfortunately in real situation, generic service are not reusable for some reasons:
- for the same field same field might have different validation in different form.
- there is dependency, example, to read special field
The key thing here is all about the design and planing before development. Whereby if you have all the info and requirement HCM form to be implemented(which you wont get it for most of the cases), and you have the overall view of all HCM to be implemented and you are able to plan ahead before coding, then you can design the generic service for each/related field.
If it is not the case, i would encourage to use 1 generic service for all the field in the HCM form. It would ease the team during support/maintenance phrase as well. For sample, please refer to HRMSSRCF_REQUISITION_ADVANCED for Create Requisition form.
This is my humble opinion based on my experience working on HCM forms. Please do comments and discuss.
regards,
Xiang Li -
Adobe HCM Processes and Forms Start processes iView error
Hi,
We are implementing Adobe HCM processes. The forms based on the PCR technology are working fine. However, we want the new HCM Processes and Forms technology. We have implemented Business packages for MSS, HR Administrator and XSS (PC_GUI). ADS is configured correctly as the PCR Adobe forms are working fine.
We want to use the WebDynpro version of HCMPF and NOT the ABAP version. When starting the Start Processes IView (sap.com/paasrprocst) we get the error:
com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst
at com.sap.portal.pcm.iview.admin.AdminBaseiView.createAttrSetLayersList(AdminBaseiView.java:361)
at com.sap.portal.pcm.iview.admin.AdminBaseiView.getAttrSetLayersList(AdminBaseiView.java:205)
at com.sap.portal.pcm.iview.admin.AdminBaseiView.getCustomImplementation(AdminBaseiView.java:148)
at com.sap.portal.pcm.admin.PcmAdminBase.getImplementation(PcmAdminBase.java:530)
at com.sapportals.portal.ivs.iviews.IviewServiceObjectFactory.getObjectInstance(IviewServiceObjectFactory.java:448)
... 40 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; InfoPath.1; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 1.1.4322; .NET CLR 3.0.04506.648)
Version null
DOM version null
Client Type msie6
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, build ID: 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:13:14[UTC], changelist=455669, host=pwdfm101), build date: Sat Jan 19 11:19:58 AST 2008
J2EE Engine 7.00 patchlevel 109044.44
Java VM Java HotSpot(TM) 64-Bit Server VM, version:1.4.2_12-b03, vendor: Sun Microsystems Inc.
Operating system SunOS, version: 5.10, architecture: sparcv9
Session & Other
Session Locale en
Time of Failure Thu Mar 13 13:07:45 AST 2008 (Java Time: 1205402865554)
Web Dynpro Code Generation Infos
sap.com/pb
SapDictionaryGenerationCore 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:42[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:50[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapGenerationFrameworkCore 7.0013.20060719095755.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:44:42[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:26[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:30[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:23[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary 7.0013.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:54:53[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro 7.0013.20070703112649.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:00:50[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
SapWebDynproGenerationCore 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:37[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
sap.com/tcwddispwda
No information available null
sap.com/pb_api
SapDictionaryGenerationCore 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:42[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:50[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapGenerationFrameworkCore 7.0013.20060719095755.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:44:42[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:26[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:30[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:23[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary 7.0013.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:54:53[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro 7.0013.20070703112649.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:00:50[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
SapWebDynproGenerationCore 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:37[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
sap.com/tcwdcorecomp
No information available null
Detailed Error Information
Detailed Exception Chain
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to load page
at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:527)
at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:191)
at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:748)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:283)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: javax.naming.NamingException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst [Root exception is com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst]
at com.sapportals.portal.pcd.gl.JndiProxy.getObjectInstance(JndiProxy.java:51)
at com.sapportals.portal.pcd.gl.PcdGlContext.getSemanticObject(PcdGlContext.java:919)
at com.sapportals.portal.pcd.gl.PcdGlContext.getSemanticObject(PcdGlContext.java:692)
at com.sapportals.portal.pcd.gl.PcdGlContext.lookup(PcdGlContext.java:69)
at com.sapportals.portal.pcd.gl.PcdURLContext.lookup(PcdURLContext.java:238)
at javax.naming.InitialContext.lookup(InitialContext.java:347)
at com.sap.portal.pb.data.PcdManager.doInit(PcdManager.java:72)
at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:525)
... 31 more
Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst
at com.sap.portal.pcm.iview.admin.AdminBaseiView.createAttrSetLayersList(AdminBaseiView.java:361)
at com.sap.portal.pcm.iview.admin.AdminBaseiView.getAttrSetLayersList(AdminBaseiView.java:205)
at com.sap.portal.pcm.iview.admin.AdminBaseiView.getCustomImplementation(AdminBaseiView.java:148)
at com.sap.portal.pcm.admin.PcmAdminBase.getImplementation(PcmAdminBase.java:530)
at com.sapportals.portal.ivs.iviews.IviewServiceObjectFactory.getObjectInstance(IviewServiceObjectFactory.java:448)
at com.sapportals.portal.prt.jndisupport.DirectoryManager.getObjectInstance(DirectoryManager.java:56)
at com.sapportals.portal.pcd.gl.JndiProxy.getObjectInstance(JndiProxy.java:47)
... 38 more
Can anyone tell me more about the cause this might have? Also, are there any further prerequisites for this iView to work?
Any help will be appreciated and rewarded accordingly.
Regards,
Thomashello,
how did you solve it ?
Regards,
Dimitry Haritonov -
Error in MSS HCM Processes and Forms Overview
Hi all,
Currently we are working on ESS/MSS from NW 7.3 portal.
When i open HCM Processes and Forms Overview from MSS, it prompt me to change the password again and again.
And on some user HCM Processes and Forms Overview not shown properly.
Error while processing your query
What has happened?
The URL call http://<host name>:1080/sap/bc/webdynpro/sap/asr_pa_pd_processes_display was terminated because of an error.
Note
The following error occurred in system BEQ : Parameter has invalid value: Parameter TSTMP1 has invalid value 0 .
The error occurred on application server MUMSAP02_BEQ_00 and in work process 8 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: SUBTRACT of program CL_ABAP_TSTMP=================CP
Method: SUBTRACT_TIMESTAMPS of program CL_HRASR00_PROCESS_UTILITIES==CP
Method: GET_CURRENT_TIME_DATA of program CL_HRASR00_PROCESS_UTILITIES==CP
Method: START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: IF_COMPONENTCONTROLLER~START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
What can I do?
If the termination type is RABAX_STATE, you will find more information on the cause of termination in system BEQ in transaction ST22.
If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server MUMSAP02_BEQ_00 in transaction SM21.
If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process 8 in transaction ST11 on the application server. MUMSAP02_BEQ_00 . You may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system adminmistrator.
Error Code: ICF-IE-http -c: 350 -u: ISHAJI -l: E -s: BEQ -i: MUMSAP02_BEQ_00 -w: 8 -d: 20130514 -t: 133514 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION -X: D4AE5218F8121ED2AF8DA00F61FBEAC0_D4AE5218F8121ED2AF8DA00F5D19EAC0_1 -x: 006DBCE20F7BF1E58AC0D4AE5218F812
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Please suggest me the solution.
Regards,
DevendraDear Andrea,
I reset the password of backend user and gave sap_all and sap_new role.
Last time it prompt the screen in mss as to change the password. (See above screen shot).
But after reset the password...error showing instead of login screen in mss as below:
Error while processing your query
What has happened?
The URL call http://<host name>:1080/sap/bc/webdynpro/sap/asr_pa_pd_processes_display was terminated because of an error.
Note
The following error occurred in system BEQ : Parameter has invalid value: Parameter TSTMP1 has invalid value 0 .
The error occurred on application server MUMSAP02_BEQ_00 and in work process 7 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: SUBTRACT of program CL_ABAP_TSTMP=================CP
Method: SUBTRACT_TIMESTAMPS of program CL_HRASR00_PROCESS_UTILITIES==CP
Method: GET_CURRENT_TIME_DATA of program CL_HRASR00_PROCESS_UTILITIES==CP
Method: START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: IF_COMPONENTCONTROLLER~START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
What can I do?
If the termination type is RABAX_STATE, you will find more information on the cause of termination in system BEQ in transaction ST22.
If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server MUMSAP02_BEQ_00 in transaction SM21.
If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process 7 in transaction ST11 on the application server. MUMSAP02_BEQ_00 . You may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system adminmistrator.
Error Code: ICF-IE-http -c: 350 -u: IKHASU -l: E -s: BEQ -i: MUMSAP02_BEQ_00 -w: 7 -d: 20130514 -t: 175940 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION -X: D4AE5218F8121ED2AF923E065A39EAC0_D4AE5218F8121ED2AF923E394271EAC0_1 -x: F091BCE2D132F1D58AC0D4AE5218F812
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
I checked log in ST22 as below
What happened?
The exception 'CX_PARAMETER_INVALID_RANGE' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_ABAP_TSTMP=================CP' has to be
terminated.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_PARAMETER_INVALID_RANGE', was not
caught in
procedure "SUBTRACT_TIMESTAMPS" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Parameter has invalid value: Parameter TSTMP1 has invalid value 0.
Regards,
Devendra -
Error while Accessing the HCM process and forms
Hi All,
We have implemented HCm process and forms. Everything was working fine earlier but for past few days we are facing an issue after selecting an employee and clicks on the select process we are getting the following error. Kindly povide the solution.
The following error text was processed in the system GOA : Component Usage OADP_USAGE Does Not Have an Active Component
The error occurred on the application server sapgoa_GOA_37 and in the work process 4 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: ENSURE_ACTIVE_COMPONENT of program CL_WDR_COMPONENT_USAGE========CP
Method: GET_INTF_CONTROLLER_INTERNAL of program CL_WDR_COMPONENT_USAGE========CP
Method: IFWDR_INTERNAL_API~GET_INTERFACE_CTLR_DELEGATE of program SAPLWDR_RG_PROXY_FACTORY
Thanks & Regards,
Sreelatha Gullapalli.Hi,
In EhP4, the employee search is created using OADP framework . And if the relevant configuration is not maintained , I mean there is a view cluster where the applications (PA/PD) and relevant object types are maintained.
If this is not maintained, this creates a error. Please check .
Hope this helps.
Best Regards
Saujanya -
HCM Process and Forms(HCM P&F) vs Internal Service Request(ISR PCR)
Dear Experts.
I am new with Personnel Change Request(PCR) in the portal Self-Service.
I know that the new technology used for SAP ERP 6.0 is with HCM P&F.
ISR is used for Realease 4.7(EP 5.0/EP 6.0).
My question is:
What requirements need a company for implement the PCR and HCM P&F?
Where I do the configuration for the PCR and HCM P&F in theCustomizing or T.Code?
Anyone know a book about the creation of HCM P&F ?
Thanks in advance
Regards
Carmen GuerreroHi Carmen ,
Please refer this thread :
[Re: HCM Processes and Forms Fundamentals]
Hope this helps.
Regards,
Aravind.P -
Message Handling in HCM Process and Forms
Hi,
I have added own messages logic
MESSAGE_HANDLER Type Ref To IF_HRBAS_MESSAGE_HANDLER
message_handler->add_message( message = message ).
in "DO_OPERATION" method of Generic Service in HCM process and Forms.
Problem : We have handled messages in method "DO_OPERATION" but when we click on NEXT push button (review and send)at mss level, same error messages is displayed for 2 times above the adobe form.
Same error messages are displayed as many times as we click on NEXT push button.
Need Solution : It is supposed to display only once.
Thank You,
Swetha.CHi Shweta,
Please check SY-UCOMM in both the cases.
1. After Selecting Position
2. After Clicking 'Next' Button.
If SY-UCOMM is different, Then Add message to Message_handler only when Position is selected.
That means If sy-ucomm = Position select User command
Then Add message to Message_handler.
endif.
'Else dont ADD'
Hope this helps.
Pradeep. -
Use HCM processes and Forms without using the Enterprise Portal
is it possible to leverage existing HR Admin Services (HCM processes and Forms) functionality without using the Enterprise Portal?
1) Create an Adobe form and Interface using SFP
2) Set up ISR and Form Scenario
3) Set up Forms configuration to use existing Backend and generic Services
4) Set up workflow to updated Backend using Services
is it possible to do the above steps and not use the Portal? If Yes, how do we present the forms to the Manager, and provide different buttons that appears on the Portal by default?
Any ideas will be greatly appreciated.
Thanks,
SaurabhHi Saurabh,
your assumptions and findings (items can not be started from the backend workflow inbox etc.) are correct: These processes can not be started without the Portal and it is not intended to do this.
The above mentioned backend report are only forseen for implementation and testing purposes and not for productive use.
In addition to the fact, that you already can't execute the work items a lot of other features of the framework (Process Browser etc.) are only available through the Portal.
Best Regards
Michael Bonrat - Solution Manager HCM Processes and Forms
Info about HCM Processes and Forms:
www.service.sap.com/erp:
- SAP ERP Human Capital Management -> Workforce Process Management -> HCM Processes and Forms -
Default value in dropdown field for FPM form in HCM Processes and forms
Hi Experts,
I am developing HCM Processes and forms using FPM forms and I had a dropdown list contains ten values. So, every time while opening the form first time, my dropdown field should be defaulted with fifth value from the list. How can we achieve this in dropdown field related to FPM Form.
Please guide me.
Regards,
Nayani.You would have to assign the default value to one your custom generic services.
Regards.
PS: There are posts which talk about generic services , make yourself comfortable with the concept of generic services. -
Query on HCM Processes and Forms
Hi
I am facing some issues in configuring Hiring Forms in HCM Processes and Forms. I can place them in 2 baskets and describe each of them below. I would appreciate any advise on ways and means to overcome these errors.
Basket #1
I want to use the standard forms SHU1, SHU2 in development environment to understand the HCM P&F functionalities. I copied these form scenarios from client 000 and did all the configurations as outline in IMG activity HRAdministrative Services >> Configuration of Forms and Processes >> Sample Processes for HCM Process and Forms.
When I run a check using HR Administrative Services >> Configuration of Forms and Processes >> Configuration of Forms >> Check Consistency of Form Scenarios and select Form name, I get errors along following lines:
u2022 Error Message Sample#1 Form scen SHU1 vers. 00000 serv. SAP_PA: Only one deflt value allowed for field I0009_ZLSCH
u2022 Error Message Sample#2 Form scen. SHU1 vers. 00000 service SAP_PA: Field I0007_ARBST default value is not created
u2022 Error Message Sample#3 ISR scenario SHU1 version 00000: Field I0001_BUKRS is missing
u2022 Error Message Sample#4 Form scen. SHU1 vers. 00000: Field I0007_ARBST service for default values not required
However, at the bottom of the log I see this message in Green: Form scenario SHU1 version 00000: Form scenario is consistent
I tried to make the changes as suggested in the Long Text for each of these messages. Probably due to the fact that I am using standard delivered forms, I get this message u201CDo not make any changes (SAP entry)u201D and I am unable to save the changes.
Basket #2
In this basket I have Org_Change form and have managed to go the whole nine yards and complete the configuration in ECC. The consistency checks for process and forms are in green. However, I am unable to start the process through Portal. I get this message u201Cno data availableu201D when I try to select a process.
Among the 5 roles delivered in SAP as initiators for processors u2013I am interested in 3 of them HRASARA (for HR Administrator). I have configured HRASRA and HRASRB as initiators for Org_Change. However, I am not able to figure out how to link these roles to portal roles such as SAP_ASR_ADMINISTRATOR, SAP_ASR_MANAGER etc.
I would appreciate any advise on ways and means to overcome these errors.
Thanks
SubhashHave you been able to fix your issue in Basket # 2 ?
Maybe you are looking for
-
dear sapgurus when i am runing consingment senarios i am getting error in MRKO no document found, thats way my consingment not settal, plz possible give me setting which required in consingment regards
-
Logic 9.17, Mountain Lion, and Alesis MultiMix 16 Firewire compatibility?
Does anybody know if the Alesis MultiMix 16 fire wire audio interface/mixer works with Mountain Lion and Logic 9.17 ? Any info would be helpful. Thank You
-
Dear Experts, We have designed workflow for triggering mails based on status changes, in solution manager support desk so our requirement is to have BSP link with the mail contents so that support team members by clicking that link in email it should
-
I have used Open Office for almost 2 years. I recently downloaded Microsoft Office 2011 and now, not only can I not use Open office due to formatting issues, I cannot read any of my documents that were saved in Open Office unless I open them in TextE
-
Fork : triggering and terminating event ?
Hi Experts, I am a begginer in Workflow .. I just want to know how Fork can be used for paralled processing with triggering and terminating event. It would be appreciated if provided with some scenarion in detailed steps. Thanks in advance. Ganesh.