Generic Templates for all customers

Dear experst,
can I use in the PI a generic template for different customers sending messages via PI.
That means the sender is 1 : N customers.
Please advice how we can do it.

hi,
That depends on what it's a "generic" for you and what is exaclty your flow: which receiver adapter ?
but yes you can do it in by adding several receivers in the Receiver Determination... if the receiver CC should be different... that means if receiver folder / filename should be differents (for instance, if it's a file adapter). Always in Receiver Determination you can define a condition for the routing to different receiver, else every time ALL receivers will receive the info.
regards
Mickael

Similar Messages

Is verizon waiving fees for all customers affected by hurricane sandy?

is verizon waiving fees for all customers affected by hurricane sandy?

http://news.verizonwireless.com/news/2012/11/pr2012-11-04a.html
http://news.verizonwireless.com/news/2012/11/pr2012-11-05.html
http://news.verizonwireless.com/news/2012/11/pr2012-11-04.html
You should check out any other press releases for additional information about the recovery of the Verizon Wireless network after Hurricane Sandy.

XL Reporter- Report by Sales Rep show the same sales rep for all customers.

Hi,
When creating a report using XL reporter, Sales report by Item detail for all customers with selection by Sale rep ( expression) parameter, the report shows the name of the first selected sales rep name all through the report.
Please comment if there is any way to avoid this error.
Regards.

Thanks for the reply!
No, Since this is a sales by item detail report, we have already grouped it by Brand....
We do not want the report to be seen grouped by Sales rep, as that would group all transactions under different brands under one group.....
Regards

Exclusion - For all customers, except one

Is there a simple way to create exclusion for ALL customers, except XXXXX?
There are approx 20,000 customers, across multiple Sales Orgs.
Would like to exclude 100+ products from 19,999 customers
Is there are way to set up products for only one customer to purchase?
Listing will not work.
Considering multiple levels of exclusion to get to the 1 customer, but searching for an easier method.
Thanks.

Hi Tom,
I think Listing will work.
What if you make a single material group for all 100+ products and create condition record in Listing for this material group and that particular customer ??
I think it should work.
Share your feedback
Sagar

How to set a customized search results template for all users

Hi.
I know the customized search results views are stored in a file called pne_portal.hda that resides on every user's subfolder in data/users/profiles/...
Is there a way to set a customized search results template for all users? If it's impossible, is there a way to modify the Headline view? I'm not able to find the resource or template where this view is.
Thanks in advance.

I wasn't able to understand what was meant by this post. Therefore, I modified the standard template HeadLine View.
Columns for this template are defined in the include slim_search_result_table_header_setup (in std_page.htm).
Here is the modification of the code:
<$if customTemplateId and not (baseTemplateId like customTemplateId)$>
          <$columnsString = utGetValue("customlisttemplates/" & strLower(customTemplateId), "columns")$>
          
     <$else$>

          <$columnsString="dDocName,dDocTitle,dInDate,dDocAuthor"$>

          <$columnsString=columnsString&",xComment"$>
          
     <$endif$>

Can we run F.28 in back ground for all customers.

Hi ,
Can we run F.28 for all customers in Back ground.
Thanks in advance.

Yes
you can schedule this in the background
this will be like any other batch job you schedule
you will have to give the customer range that you want to execute or upload a list of customers befo9re you click on execute in background
hope this helps
Thanks
Prashant

SAP MII 15.0 released for all customers?

Hello,
Is the product SAP MII 15.0 released for all customers or is it still in Ramp-up?
Best regards,
Pekka

Pekka,
The MII 15.0 release is currently in Ramp-up (started back in May 2014) and is planned to exit Ramp-up in Mid-November 2014. There is also a Feature Pack that is currently planned for release in January 2015 which will provide additional features and enhancements to the 15.0 release.
Hope this helps,
Sam

How to use one WAD template for all the available queries

Hi,
I have created a WAD template... Now we have close to 25 queries which will use that template for displaying their output at Portal...
Is there any way that i don`t have to create multiple copies of my WAD template...
I.e. all queries would call that same template through portal...

Hi,
The Bex report uses the Standard Template 0ANALYSIS_PATTERN while it is executed.
So if your sure that the look and feel of all the Reports is going to remain same, you don't need to even attach all these Queries to Templates in WAD.
When you execute the BEx query, it would pick up the standard template and run it in portal.
But if you want to customize the Report Template:
1) You can change this standard template 0ANALYSIS_PATTERN and customize it according to ur requrement in WAD.
2) Or you can create a copy of this standard template and change it as required. Then change the template in spro (transaction RSCUSTV27) to point to this Z template.
Let me know if you need more details.
Regards,
Forum

Need Standared report for Open Sales order for all customers

VA05 is not useful as it gives this list for individual customers.
We need to see a list of all open orders for asll customers in one report only.
Thanx in advance.

Hello,
did you try with transaction SDO1 - Orders Within Time Period? If it doesn't fit your requirements I suggest you to create a query.
Best regards,
Andrea

Report for inquiries for all customers and material

how can i see a report of all inquiries of all customer and materials is there any predefine report in sap
we do have va15 but it does not list depending on the custmer or material, how can we do it for all customer
thanks

Standard SAP SD Reports:=
Statistic Group:
Purpose To capture data for Standard Reports, we require to activate Statistic Group as under:
--> Item category (Configuration)
--> Sales document type (Configuration)
--> Customer (Maintain in Master data)
--> Material (Maintain in Master data)
When you generate statistics in the logistics information system, the system uses the combination of specified statistics groups to determine the appropriate update sequence. The update sequence in turn determines for exactly which fields the statistics are generated.
Configuration:
IMG --> Logistics Information System (LIS) --> Logistics Data Warehouse --> Updating --> Updating Control --> Settings: Sales --> Statistics Groups -->
1. Maintain Statistics Groups for Customers
2. Maintain Statistics Groups for Material
3. Maintain Statistics Groups for Sales Documents
4. Assign Statistics Groups for Each Sales Document Type
5. Assign Statistics Groups for each Sales Document Item Type .....
All Standard Reports which are available are as under:
SAP Easy Access: Information Systems -> Logistics -> Sales and distribution ->
1. Customer -> Incoming orders / Returns / Sales / Credit memos / Sales activities / Customer master / Conditions / Credit Master Sheet
2. Material -> Incoming orders / Returns / Sales / Credit memos / Material master / ...
3. Sales organization -> Sales organization / Sales office / Sales employee
4. Shipping point -> Deliveries / Returns
5. SD documents -> Orders / Deliveries / Billing documents ...
& so on.
Some of the Standard reports in SD are:
Sales summary - VC/2
Display Customer Hierarchy - VDH2
Display Condition record report - V/I6
Pricing Report - V/LD
Create Net Price List - V_NL
List customer material info - VD59
List of sales order - VA05
List of Billing documents - VF05
Inquiries list - VA15
Quotation List - VA25
Incomplete Sales orders - V.02
Backorders - V.15
Outbound Delivery Monitor - VL06o
Incomplete delivery - V_UC
Customer Returns-Analysis - MC+A
Customer Analysis- Sales - MC+E
Customer Analysis- Cr. Memo - MC+I
Deliveries-Due list - VL04
Billing due list - VF04
Incomplete Billing documents - MCV9
Customer Analysis-Basic List - MCTA
Material Analysis(SIS) - MCTC
Sales org analysis - MCTE
Sales org analysis-Invoiced sales - MC+2
Material Analysis-Incoming orders - MC(E
General- List of Outbound deliveries - VL06f
Material Returns-Analysis - MC+M
Material Analysis- Invoiced Sales - MC+Q
Variant configuration Analysis - MC(B
Sales org analysis-Incoming orders - MC(I
Sales org analysis-Returns - MC+Y
Sales office Analysis- Invoiced Sales - MC-E
Sales office Analysis- Returns - MC-A
Shipping point Analysis - MC(U
Shipping point Analysis-Returns - MC-O
Blocked orders - V.14
Order Within time period - SD01
Duplicate Sales orders in period - SDD1
Display Delivery Changes - VL22
Regards,
Rajesh Banka
Reward points if helpful.

Dunning Letter Email for all customers

Hi All, I need your help in my requirement, which goes like this :- In F150 tcode(ecc 6.0), which internally uses RFMAHN20 program to display all customer accounts, we can select a customer and see the dunning letter(It's a sapscript) and also take a printout. I made some changes accordingly to add the email functionality so when user checks the print preview then a pop up promts for email address( which has default value of email address assoicated with that particular customer) and send pdf letter accordingly. But my requirement is to send email to all customers who may be selected via RFMAHN20( they may be all customers who belong to the same account type). How can we achieve this in the most easy way? I already copied standard FM's associated. So can I do something in them to resolve this or any separate program is needed( if so, how?)? Please respond asap. Thank you so much...in advance

Hi Husain...Thanks for immediate response. There is already data being pulled by standard function modules like PRINT_DUNNING_NOTICE(copied into Z). Can we use that in simpler way(without the need of any new driver program with all the data population again)? And your answer is correct which I already thought earlier and kept it as a last resort, because I need to populate all the data again, convert spool to pdf and send pdf's to all selected customers And one more thing is that the requirement is to schedule a background job which takes care of sending all the emails . So any more ideas?

How to save a customized format and save it as default template for all reports?

Hi All,
I have a specific format to be followed for all the reports. I'm using WebI Rich Client 4.1 SP1. Can i create a template with this customized format and save to use it for all the reports in future as a default format. If so how can that be done?
Regards,
Naren Vema.

Naren,
Another option is, if you want to FORCE global stylesheet for ALL users. You can update the WebIDefaultStyleSheet.css located in \SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\images\ folder.
Regards,
Ajay

Urgent!! Default query template for all users.

Hi Guys,
How do I set the default template for queries for all users.
I saved the default template and did the setting settings>query on embed>use the default template. So the template eorked for me.
But when a different usre tried, the template did not load for him.
So is there a specific setting that can be done so that it apllies for all users.
Thanks
simmi

Hi Simmi,
There is a way that you can do this. Check this post for details as provided by Prakash:
Re: Permanent BW Excel Template
Hope this helps...

OB45 Default Credit for *all* customers ?

in OB45, you can set a Risk Category and Credit limit amount for all newly created customers.
Problem is, this will create a record in KNKK even for customers who may have no reason for a credit limit.
For example: I want credit limits initially set for any Sold To.acct group 0001, but for Ship To (0002) or Plants (PLNT) I have no reason to create a credit limit.
So the question is: Why can't I OB45 for a specific Account group(s)? It's all or nothing, and this just doesn't make sense to me. Does anyone know of another to way to accomplish this, beside just manually creating FD32 for each new customer?
When I create a Sold to 0001 customer, I want it's risk category and credit limit amount defaulted to set values.
Thanks in advance
Bill

dear mooseman,
let me divide your question into 2 parts:
1. In OB45, you can set a Risk Category and Credit limit amount for all newly created customers.
Problem is, this will create a record in KNKK even for customers who may have no reason for a credit limit.
1.A. it will create the credit limit for all the new customers created. In such case remove CCA for the new customer in XD02 and see. or go to OBD2 supress CCA and check.
2. So the question is: Why can't I OB45 for a specific Account group(s)? It's all or nothing, and this just doesn't make sense to me. Does anyone know of another to way to accomplish this, beside just manually creating FD32 for each new customer?
When I create a Sold to 0001 customer, I want it's risk category and credit limit amount defaulted to set values.
2.A. some times we have to fiddle the system, so please supress CCA for those customers you are not allowing any credit limit.
please check the system and come back with queries.
regads,
balajia
Edited by: balaji timmampalli achari on Nov 17, 2010 6:32 AM

How to use a generic sender for all users in SCOT

Hi.
I´m trying to find a way to define a static sender for all the mails sent from our SAP system.
It automatically takes the email adress set un the user data (SU01 tcode) but our mail server does not allow that adresses.
We can get the access just for one single emeil adress.
The easy solution would be to change everyone´s email adress data to the same one, but I´m trying to find another solution, a way to define a "static" sender for the mails, not taking not from the user data.
Any advise and help will be higly appreciated.
Regards.

Well as a workaround you can create an email address/folder and provide this in SOCT and then from this mail folder , setup a rule to forward the mail to all receipients.

Generic Templates for all customers

Similar Messages

Maybe you are looking for