Genius and Duplicate Settings

Hi, I recently purchased a 120gb ipod classic. I love the new genius feature; it makes making playlists on my ipod that much easier. But, for memory purposes on my computer, i do not keep the music on it, just the ipod itself. I was wondering if the ipod genius updates itself from the ipod and why i cannot access the settings for genius on the ipod (i.e. the amount of songs on the playlist). Also, why can i not view duplicates on the ipod, but can on the computer. If you could let me know how to fix these problems, if you can fix them, or why they can't be fixed, I would greatly appreciate it.
Thanks,
Nick Booth

But, for memory purposes on my computer, i do not keep the music on it, just the ipod itself
The iPod isn't designed to work this way, it's meant to work in conjunction with your iTunes library stored on your computer.
Genius playlists that are created directly on your iPod are automatically set to a 25 songs limit. There are no settings on the iPod that can change this.
Neither can you view duplicates directly on the iPod. Any changes made to your music (i.e. removing duplicates) are meant to be made in iTunes and then your iPod is synced to reflect the changes.
If your library is too large for your computer's internal hd, why not think about an external hd to store it?

Similar Messages

Configuration Settings for Postal Adress Validation and Duplicate Check

Hi,
What are The Configuration settings for Postal adress validation and Duplicate Check for Accounts(BP'S) in CRM 7.0 version
Can some one send me the configuration settings for Postal Adress validation and Duplicate Check
Thanks & Regards
Kishor Kumar

Hi kishore kumar,
For the Postal code Validation you need to install and configure the following
Outside of your SAP system:
1. Install Data Services and the Address Directories.
2. Install Data Services Component.
3. Install the RFC Server.
On your SAP system:
4. Install the BAdIs from the previous version of this product.
5. Install the BAdIs support package from this version.
6. Run the post-installation tasks required of a new installation of the BAdIs.
7. Activate the IC WebClient, if desired.
Thanks
Jayakrishnan Nair

My shuffle ,doesnt get syncronized with itunes in my pc,getting audio and video settings error,but able to get it syncronized with my friends pc

my shuffle ,doesnt get syncronized with itunes in my pc,getting audio and video settings error,but able to get it syncronized with my friends pc

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Help Please! Genius AND WiFi not working on iPod

Hi, I'm using a first gen touch on the latest firmware. even though i have genius on iTunes, it will not transfer onto the iPod. There simply is no genius button. How can I get this working?
Also, on an unrelated note, my WiFi is completely shot. The little scroll thing will pop up for about a second than disappear, even in places where ive been using the WiFi for as long as I've had the iPod, which is about one year! I've never had any problems with the WiFi until I upgraded to 2.0 and above, does anyone know any solutions? I've reset the settings and network settings, and neither of these worked. Any help?
Any help would be appreciated!!
Message was edited by: romeboards

reset your network connection. I think it's under general settings. Same thing happened to me, and that fixed it

ITunes 11 on a PC - where is Genius and how to use it in this version?

I'm on a PC and using iTunes 11, and cannot find the bottom right hand show/hide genius toggle. There is no checkbox on PC for "enable genius" in preferences (as some on the Mac forums point out.) I'm trying to get Genius suggestions based on my songs.to discover and purchase. Apple what have you done??!? Any help appreciated.

hi dominic.
thanks for the help and the links.
there is something terribly lacking in mac UI with respect to this unless i am missing something. if i do a search in Spotlight i see results and even when i see the file i want to know something about i have to OPEN FINDER which shows a ton of results (including hundreds if not thousands of eml file that i have to call mac and probably pay to find out why they are still showing up when prefs in Spotlight say to not show them...) and only then can i actively select the file and have it show a file path at the bottom of the finder window.
this is maddening. isn't there an option to show this information in Spotlight or to show this information WHEN THE FILE IS OPEN (apologies for the caps). i mean, if i have a file open, maybe i don't know /where/ it came from for some reason.
for instance, if i am in a hurry and i open the file directly from Spotlight i can edit it and save it but i still have no idea where it resides on my hard drive. similarly if i open a file directly from spotlight and DUPLICATE a file and i want to save it as Version 2 - i have to - - - - well i guess i have to run another search for the file i just opened and am working upon in order to just save the dang file to the same location the original is in?
i mean, the links are showing that i should open Get Info but i think i need to see the file in finder to run this command anyway since i have to right click on the file itself.
maybe i am missing something but can't MAC OS just show me the FILE PATH at the top of the document like it does in Finder and also show me the FILE PATH in Spotlight? seems like the current implementation is like a big game of hopscotch for no good reason except the information is not shown to the (power) user.
maybe i am missing a new feature in ML or in Mavericks or maybe i am using the wrong terms in the original title?
THANK YOU

Genius and 13014 error

hi all !!
sorry for my english ...
I encountered a very strange issue with my touch (first gen) : when I switch on GENIUS, I got an error message at the end of synchronisation : "can not synchro, error 13014).
then, GENIUS is not active on the ipod. I don't know what happened because I used GENIUS in the past without pbs ...
I can synchro without error if I put it off.
I can swith it on if I use another computer (my office one) and If I put off the synchro of the music : then I have GENIUS active on the Ipod BUT : no list possible, because my file is alone ... no other song like this one !! (approx 180 cds on my 16 gb Ipod !!!)
I tried to restore the ipod, to upgrade the system from 2. to 3. ... no effect !!
I don't know what to do ... I tried with only 8 songs : ok without GENIUS, error message when I tried to swith it on !!!
help will be nice !!!

I found the solution:
first you have to locate your last library file, you can do this by clicking Edit-preferences-advanced. it will show you the itunes media folder location. then close Itunes
open your folder and locate the last library (libraries are saved with date names, find the most recent one or the one that was last modified).
change the name of the library to today´s date following the format it already has. you will have to change the name for libraries: .itl, .xml, genius and extras.
once you have changed the name to today´s date on the 4 libraries you will have to delete all other libraries existing on the same folder or on a folder named "previous itunes libraries". it is also recommended to delete the itunes "preferences file" .dat (usually 1kb) and the "sentinel" file.
so, you will have on your itunes media folder only 4 libraries: .itl .xml genius and extras.
the next step is to click the itunes icon holding the "shift" key . itunes will ask you to either "quit, choose library or create library" click on choose library. then locate the library you just renamed with today´s date and extension .itl
done, itunes will open with the last saved version of your library. keep in mind that some changes or songs will not be present if you added any while getting the error "itunes cannot save the library file. a duplicate name has been specified" just locate the songs and add them again, if you have the option "copy files to itunes media folder when adding to library" checked. then go to file-add folder or file-and locate the songs missing on the itunes media folder.itunes saves the files on the hard drive but does not save the changes on the library.
hope this is clear enough.

Incorrect Dates and Duplicate Entries in Calendar

Hello,
I have had some duplication and incorrect date problems with calendar entries on my iPhone, but not iCal on the Mac that I synch it with. Maybe someone has a clue which troubleshooting path I can follow.
Duplicate entries:
I originally had "all calendars" synching and only a few of these calendars were duplicationg all of their entires. Upon further inspection in the iTunes synch menus, I found that I had a duplicate of each calendar; one with [email protected] and [email protected] I marked only the [email protected] calendars and that has taken care of the duplicates that I can see so far.
Incorrect dates:
I have a few repeating entries in one calendar that was duplicating above, but they are listed with incorrect dates on the iPhone only. These entries are marked all day events, but the pattern is for all the entries to be one day early vs. what is indicated on iCal. Forcing a reload of iCal data from my Mac doesn't change anything.
There are a few things that I could do in my troubleshooting, but are labor intensive. I just thought that I would see if my issue ring a bell with anyone and/or there is a bug that has already been identified.
“Technological change is like an axe in the hands of a pathological criminal.” (Albert Einstein, 1941),
Dr. Z.

Ok you can try one thing first, less invasive to see if it clears one set of contacts.
Open your contacts
Swipe down from the top edge > Settings.
Scroll down and turn off each of the various contact accounts.
tap BACK at lower left and now view your contacts.
All that should be left are the "local" contacts. Do you see any, and are they the contacts duplicated?
If so, then close all that and return to your main homescreen.
To clear the local calendar or contact database on the BlackBerry 10 smartphone, complete the following steps:
Swipe down from the top bezel on the home screen, and select Settings.
Select Accounts.
Tap the action menu button (3 vertical dots) on the bottom-right.
Select Clear Local Contacts or Clear Local Calendar.
Now, view your contacts app again. Make sure the ALL TAB is displayed at lower left.
Scroll through and check for duplicates.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Avoiding null and duplicate values using model clause

Hi,
I am trying to use model clause to get comma seperated list of data : following is the scenario:
testuser>select * from test1;
ID VALUE
1 Value1
2 Value2
3 Value3
4 Value4
5 Value4
6
7 value5
8
8 rows selected.
the query I have is:
testuser>with src as (
2 select distinct id,value
3 from test1
4 ),
5 t as (
6 select distinct substr(value,2) value
7 from src
8 model
9 ignore nav
10 dimension by (id)
11 measures (cast(value as varchar2(100)) value)
12 rules
13 (
14 value[any] order by id =
15 value[cv()-1] || ',' || value[cv()]
16 )
17 )
18 select max(value) oneline
19 from t;
ONELINE
Value1,Value2,Value3,Value4,Value4,,value5,
what I find is that this query has duplicate value and null (',,') coming in as data has null and duplicate value. Is there a way i can avoid the null and the duplicate values in the query output?
thanks,
Edited by: orausern on Feb 19, 2010 5:05 AM

Hi,
Try this code.
with
t as ( select substr(value,2)value,ind
        from test1
        model
        ignore nav
        dimension by (id)
        measures (cast(value as varchar2(100)) value, 0 ind)
        rules
        ( ind[any]= instr(value[cv()-1],value[cv()]),
        value[any] order by id = value[cv()-1] || CASE WHEN value[cv()] IS NOT NULL
                                           and ind[cv()]=0     THEN ',' || value[cv()] END
select max(value) oneline
from t;
SQL> select * from test1;
        ID VALUE
         1 Value1
         2 Value2
         3 Value3
         4 Value4
         5 Value4
         6
         7 value5
         8
8 ligne(s) sélectionnée(s).
SQL> with
2   t as ( select substr(value,2)value,ind
3          from test1
4          model
5          ignore nav
6          dimension by (id)
7          measures (cast(value as varchar2(100)) value, 0 ind)
8          rules
9          ( ind[any]= instr(value[cv()-1],value[cv()]),
10          value[any] order by id = value[cv()-1] || CASE WHEN value[cv()] IS NOT NULL
11                                             and ind[cv()]=0     THEN ',' || value[cv()] END
12          )
13        )
14   select max(value) oneline
15   from t;
ONELINE
Value1,Value2,Value3,Value4,value5
SQL>

[865PE/G Neo2 Series] Memory timings and power settings anyone?

I'm not very good with computers, so I've just played around with the timings on my memory, but have not found one stable setting as of yet.
The memory is brand new and I've tested it for errors on my brothers computer and there's nothing wrong there.
Intensive harddrive usage, dvd playing and intense downloading while listening to music are sure ways to crash my system. "..........Not less or equal" is the most common error message, but there are
many many more.
Oh, maybe I should point out that overheating's not an issue, cause I've good fans and run my computer without sidepanels.
I also like to say that I have the first generation of p4 with ht and 533fsb.
I'm sure there's something I forgot to mention but here below I'll paste the system summary that Sandra gave me.
Would be forever grateful if someone could help me out with the memory timings and power settings for my board. Setting it to "auto by spd" gives me a very unstable system, so no avail there.
I'm running the mem at 2.70 and sometimes at 2.65, since these two settings seem to be the ones with least crashes.
The Memory installed are 4*512mb ,kingston 512 kvr333x64c25 pc2700
The PSU is a Tagan "TG480-u01" 480w
Many many thanks in advance guys.
SiSoftware Sandra
Processor
Model : Intel(R) Pentium(R) 4 CPU 3.06GHz
Speed : 3.10GHz
Performance Rating : PR4118 (estimated)
Cores per Processor : 1 Unit(s)
Threads per Core : 2 Unit(s)
Internal Data Cache : 8kB Synchronous, Write-Thru, 4-way set, 64 byte line size
L2 On-board Cache : 512kB ECC Synchronous, ATC, 8-way set, 64 byte line size, 2 lines per sector
Mainboard
Bus(es) : ISA AGP PCI IMB USB FireWire/1394 i2c/SMBus
MP Support : 1 Processor(s)
MP APIC : Yes
System BIOS : American Megatrends Inc. V2.5
System : MICRO-STAR INC. MS-6728
Mainboard : MICRO-STAR INC. MS-6728
Total Memory : 2GB DDR-SDRAM
Chipset 1
Model : Micro-Star International Co Ltd (MSI) 82865G/PE/P, 82848P DRAM Controller / Host-Hub Interface
Front Side Bus Speed : 4x 135MHz (540MHz data rate)
Total Memory : 2GB DDR-SDRAM
Memory Bus Speed : 2x 168MHz (336MHz data rate)
Video System
Monitor/Panel : Iiyama A201HT VisionMaster Pro 510
Adapter : RADEON X800 Series
Adapter : RADEON X800 Series Secondary
Imaging Device : CanoScan FB630U/FB636U #2
Imaging Device : Video Blaster WebCam 3/WebCam Plus (WDM) #2
Physical Storage Devices
Removable Drive : Diskettenhet
Hard Disk : ST3160023AS (149GB)
Hard Disk : WDC WD1000BB-00CAA0 (93GB)
Hard Disk : WDC WD1200JB-00CRA1 (112GB)
Hard Disk : FUJITSU MPG3409AT E SCSI Disk Device (38GB)
CD-ROM/DVD : PHILIPS DVDR1640P (CD 63X Rd, 63X Wr) (DVD 8X Rd, 8X Wr)
CD-ROM/DVD : PLEXTOR CD-R PX-W4824A (CD 40X Rd, 48X Wr)
CD-ROM/DVD : AXV CD/DVD-ROM SCSI CdRom Device (CD 32X Rd) (DVD 4X Rd)
CD-ROM/DVD : AXV CD/DVD-ROM SCSI CdRom Device (CD 32X Rd) (DVD 4X Rd)
CD-ROM/DVD : AXV CD/DVD-ROM SCSI CdRom Device (CD 32X Rd) (DVD 4X Rd)
CD-ROM/DVD : AXV CD/DVD-ROM SCSI CdRom Device (CD 32X Rd) (DVD 4X Rd)
CD-ROM/DVD : AXV CD/DVD-ROM SCSI CdRom Device (CD 32X Rd) (DVD 4X Rd)
Logical Storage Devices
1.44MB 3.5" (A:) : N/A
Hard Disk (C:) : 149GB (101GB, 67% Free Space) (NTFS)
Xp (D:) : 112GB (2.1GB, 2% Free Space) (NTFS)
Big (E:) : 93GB (9GB, 10% Free Space) (NTFS)
Jimjimjim (F:) : 38GB (2.1GB, 5% Free Space) (NTFS)
Bologna_2 (G:) : 3.9GB (UDF)
CD-ROM/DVD (H:) : N/A
Bfv_3 (I:) : 486MB (CDFS)
Doom 3 roe (J:) : 650MB (CDFS)
Sims2ep1_1 (K:) : 650MB (CDFS)
Bf2 dvd (L:) : 1.9GB (UDF)
CD-ROM/DVD (M:) : N/A
Peripherals
Serial/Parallel Port(s) : 1 COM / 0 LPT
USB Controller/Hub : Intel(R) 82801EB USB Universal Host Controller - 24D2
USB Controller/Hub : Intel(R) 82801EB USB Universal Host Controller - 24D4
USB Controller/Hub : Intel(R) 82801EB USB Universal Host Controller - 24D7
USB Controller/Hub : Intel(R) 82801EB USB2 Enhanced Host Controller - 24DD
USB Controller/Hub : Intel(R) 82801EB USB Universal Host Controller - 24DE
USB Controller/Hub : USB-rotnav (hub)
USB Controller/Hub : USB-rotnav (hub)
USB Controller/Hub : USB-rotnav (hub)
USB Controller/Hub : USB-rotnav (hub)
USB Controller/Hub : USB-rotnav (hub)
USB Controller/Hub : USB-enhet (sammansatt)
USB Controller/Hub : Stöd för USB-skrivarport
FireWire/1394 Controller/Hub : OHCI-kompatibel IEEE 1394-värdstyrenhet
Keyboard : Logitech HID-Compliant Keyboard
Keyboard : HID-tangentbordsenhet
Mouse : HID-compliant MX310 Optical Mouse
Mouse : HID-kompatibel mus
Mouse : HID-kompatibel mus
Human Interface : Logitech WingMan Force 3D USB (HID)
Human Interface : HID-kompatible konsumentkontrollenhet
Human Interface : HID-kompatibel enhet
Human Interface : Logitech Virtual Hid Device
Human Interface : Logitech Virtual Hid Device
Human Interface : Logitech USB MX310 Optical Mouse
Human Interface : Logitech WingMan Force 3D USB
Human Interface : USB HID (Human Interface Device)
Human Interface : Internet Keys USB
MultiMedia Device(s)
Device : Audigy X YouP-PAX A4 v1.00 Audio Driver(WDM)
Device : Creative Game Port
Device : Pinnacle PCTV Stereo PAL Capture Device
Printers and Faxes
Model : Microsoft Office Document Image Writer
Model : Canon PIXMA iP4000
Model : Adobe PDF
Power Management
AC Line Status : On-Line
Operating System(s)
Windows System : Microsoft Windows XP/2002 Professional (Win32 x86) 5.01.2600 (Service Pack 2)
Network Services
Adapter : Intel(R) PRO/1000 MT Desktop Adapter #2

Thanks for your answers.
Danny: 1. Yes, I've put my memory in my brothers computer, and ran memtest there, and it came out ok, but on mine it crashes almost instantly.
2. Yea, I have 2 fans blowing into the case and one out, so airflow is good, cpu is also cool and seems to be happy ;-)
Geps: I can't say I understand all these numbers but there are som specs here as an example, Tagan TG480-U01 480W ATX
I can't imagine that this psu ain't enough, and if so.....I've been had by the dealer.

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

How do I transfer my MacBook Air to my wife so she can sync her iTunes account and other settings with her iPad Mini?

How do I transfer my MacBook Air to my wife so she can sync her iTunes account and other settings with her iPad Mini?

You can change the account shortname to whatever you wish to use.
As you can see from my example above. Once you click on the Create User button a new account will be created.
She will need to get her own Apple ID setup so when she starts with iTunes she can open her own iTunes account unless you both want to share the use of the same Apple ID. This can create a bit of confusion if you have your own iPads or iPhones or iPods. As you have discovered it's pretty much one iDevice with one Apple ID.
As for the iTunes library that becomes a more complicated issue.

Last week, I had no problems streaming my MacBook Pro to my sony Bravia with a logix hdmi cable. I came back from holidays and now it doesn't work anymore. What settings should my computer be on and what settings should my tv be on?

Last week, I had no problems streaming my MacBook Pro to my sony Bravia with a logix hdmi cable. I came back from holidays and now it doesn't work anymore. What settings should my computer be on and what settings should my tv be on?

TarahCurrie Sep 10, 2014 3:48 PM
Restore From Time Machine Backup
Reinstall OS X
Get Help Online
Disk Utility
MacBook Pro, Mac OS X (10.5.8)
You are running 10.5.8
Did you try booting off your Install disk holding the c key down. From here you can get to the drop down menu just a few clicks in (you are not going to install) and run the Disk Utility>Repair Disk. See if it will let you do this.

How Do I Change an Animated Gif's Iteration and Loop Settings? (Pshop/Image Ready 7.0)

Background to Issue (NOT a PPT or Windows issue even though It will seem like that at first but read on...): I have to make Animated GIFS to be inserted into Powerpoint. I work on a Mac but the PPT presentation will be shown on PCs (non-negotiable, since I can't ask hundreds of sales reps who will be using this to install an outdated version of PPT). I already learned that I need to insert the Gifs while working on a PC or else it won't work). Fair enough- I can put it together on a PC, again not the issue. BUT, when I do THAT, the gifs still wn't animate unless I am in PPT 2002. Fair enough (Microsif going backwards not a surprise) So it won't work in PPT 2003 which is what the users will all have. But I need to get the presentation to them asap! I got a bit further in researching and found out that the solution is that I need to set my "Loop Flag" and "Iteration Settings" appropriately. See this link (http://www.soniacoleman.com/Tutorials/PowerPoint/animated_gifs/gifs.htm)
BUT I am trying to find out if one can do this already somehow in Mac Photoshop 7.0 or Mac Image Ready 7.0, where I made the gif and would prefer to keep making my gifs. Maybe I need to upgrade Image Ready or Pshop to CS? SO THE FINAL QUESTION IS: Is there another way to manual do this without this PC Plug-in?
NOTE: Yes, I know how how to set the loop to "once" or "forever" in Image Ready when I make my Gifs but apparently I need to do this somewhere else...where the iteration setting lives too?

There is an ImageAnimator so you may not need to use byte array instead.
ImageAnimator.Animate Method
http://msdn.microsoft.com/en-us/library/system.drawing.imageanimator.animate(v=vs.110).aspx
chanmm
chanmm

Error 7 occurred at Copy in ABAPI Dist New VI Library.vi- ABAPI Dist Chk for Destinations.vi- ABAPI Copy Files and Apply Settings.vi- EBEP_Invoke_Build_Engine.vi- EBUIP_Build_Invoke.vi- EBUIP_Build_Invoke.vi.ProxyCaller

When I try to build executables in LabView 8.01 I get message:
Error 7 occurred at Copy in ABAPI Dist New VI Library.vi->ABAPI Dist Chk for Destinations.vi->ABAPI Copy Files and Apply Settings.vi->EBEP_Invoke_Build_Engine.vi->EBUIP_Build_Invoke.vi->EBUIP_Build_Invoke.vi.ProxyCaller
Best Regards

I got the same error as I tried to build my application, the reason was the string I set for the 'Build specification name' property of my build.
I changed from '3DC - Dlog Data Compacter ' to '3DC' and it worked afterwards..quite strange behaviour..

Central Excise and WHT Settings in CIN Version for 4.6C

hi sap gurus,
i need urgent support from your end regarding Central Excise and WHT Settings in CIN Version for 4.6C. I am new to CIN Version, and now i deputed to the same.
can any body give the configuration of the Central Excise and WHT Settings in CIN Version for 4.6C.
kindly revert back asap.
thanks and regards,
raghav

Hi
Go to transaction code J1iln you get all the details on CIN or you can go to logistics general > tax on Goods Movement in SPRO
Anand

Genius and Duplicate Settings

Similar Messages

Maybe you are looking for