Genius does not load, just shows me a white screen, on my iPod 4th gen
I go to Genius & it never loads anything, just shows a white screen everything else works fine.
Hi SummyLove21,
Thanks for visiting Apple Support Communities.
I recommend starting with the troubleshooting steps in this article if you are not able to access iTunes Genius on your iPod touch:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
Jeremy
Similar Messages
-
Why is that whenever there's a power outage or whenever I restart my computer sometimes my iMac wont completely load up? It will just show a blank white screen. It will do that for a few days until it decides to fully load up.
First step would be a PRAM reset.
http://support.apple.com/kb/ht1379
Post back if that does not work.
The next step would be to try "Repair Disk". -
When accessing Hotmail account on Apple Air ,any page when fully loaded just goes to a white screen, so no actions can be completed. Account is fine on Imac just Air functionality faulty, any advice
thanks Bryce from OZa flashing folder with a question mark popped up,
Can mean that your Mac can't find a system folder to boot from.
Try restarting while holding down the Option key. That should prompt the Startup Manager window where you can select the startup disk and restart.
Startup Manager: How to select a startup volume
If the disk is not available, then it's failing or has failed.
If you did not backup your important files, an alternative would be data recovery but it's expensive.
One suggestion > Data Recovery by DriveSavers -
My iphone 3gs does not restore and is stuck on white screen and a message in itunes which says "waiting for itunes" plz help.
i have tried to restore it to different firmwares, tried resetting ,dfu mode , different systems etc etc nothing workedMy iphone 3gs does not restore and is stuck on white screen and a message in itunes which says "waiting for itunes" plz help.
i have tried to restore it to different firmwares, tried resetting ,dfu mode , different systems etc etc nothing worked -
I'm just wondering when IOS7 will come out for Ipod 4th gen. because half the free apps need the new IOS!!
Some apps have older versions available.
Try this if you want an App that says you need iOS 7 or later:
Go to iTunes on a computer or on a device running iOS 7 and find the app you want and download it using your Apple ID and password.
Now go back to your iPod Touch Gen 4 and go to the App Store and tap updates at the bottom right, then tap Purchased at the top. Find the app on the list that you just downloaded on the computer (or other device) and tap the cloud to download it. If it has an alternate version available that is compatible with your iOS, it will prompt you and allow you to download that.
Source: http://support.apple.com/kb/ht5919 -
MacBook Pro is not starting up. It just stays on a white screen with a flashing folder icon. Have tried restarting while holding the Option key, and the cursor becomes visible and movable, but it does not go to the desktop.
Hello Sonya_Rose,
I found this article when researching the issue you describe here named A flashing question mark appears when you start your Mac found http://support.apple.com/kb/ts1440.
Check the mouse and keyboard
This issue might occur if a mouse or trackpad button is pressed during startup. Make sure the button isn't pressed.
If the issue persists, shut down your Mac with its power button, disconnect any external mouse and keyboard, then turn on your Mac with its power button. If the flashing question mark issue persists, reconnect the keyboard and mouse.
Additional steps
If your Mac still starts to a flashing question mark, follow the steps below. If any step resolves the issue, you don't need to continue to the next one.
Select your Mac OS X startup disk with Startup Manager by restarting and holding the Option key. After your Mac starts up, restart again to verify that the flashing question mark does not appear.
If the issue persists, insert your Mac OS X installation disc. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc.
MacBook Air note: On a MacBook Air, there are two options for starting up from Mac OS X media: Either connect a MacBook Air SuperDrive to the MacBook Air via the USB port and restart the computer, holding down the C key during startup, or use Remote Install Mac OS X to startup from a system software DVD that's located on a partner computer. Once started up from Mac OS X media, skip to step 3.
Restart the computer, then hold the C key during startup.
From the Utilities menu, choose Disk Utility. Don't click Continue.
Select your Mac OS X disk (named "Macintosh HD" by default) in the left side of the Disk Utility window.
Click the First Aid tab.
Click Repair Disk to verify and repair any issues with your Mac OS X startup disk.
After repairing the disk, try to start up normally.
Important: If Disk Utility finds issues it cannot repair, you may need to back up as much of your data as possible (or use Time Machine to back up to a different disk), then erase the disk and reinstall Mac OS X. You should back up important files and data before erasing a drive. Erasing deletes everything on the hard disk (including things on your desktop). Also, you can install Mac OS X onto an external disk, start from the external disk, and use Migration Assistant to transfer items from your usual internal Mac OS X startup disk to the external disk, then erase the internal disk and reinstall Mac OS X.
If the issue persists, and Disk Utility didn't find any irreparable issues, quit Disk Utility, quit the Installer, select your disk when prompted, and restart.
If the issue continues, reset PRAM. Note: After resetting PRAM, if the computer starts up normally, reselect the startup disk in the Startup Disk preferences.
If none of these steps resolve the issue, start up from the Mac OS X Installation disc and reinstall Mac OS X.
Regards,
Sterling -
a couple weeks ago, firefox stopped loading (just hung system) on my acer computer running windows xp. I deleted firefox and downloaded versin 4.0.1. But, the same thing is happening. it starts to load but then stops responding and hangs the system. what is wrong?
I also have this problem and it just started in the last week or so. It seems to be dependent on my home network and the problem only exists with firefox. I have used chrome and IE8 with no issues. I can verify tomorrow that it only exists in my network but one thing I was able to test is that the problem exists even on my linux boot. I am totally dumbfounded with this problem and I can't find anything that will allow the gmail page to load. All other pages I have tried load fine, all be it a little slower than normal but they load. If anyone knows of a difference between firefox and all other browsers on how it goes through the router I would appreciate the info cause I don't know of any differences.
-
System Does not Load, Fans Spins Non Stop, Blank Screen.
So i have a Quad Core 3Ghz with the ATI Radeon X1900 512MB ram.
I also have 2GB of internal ram and 2 more purchased 3rd party, totally of 4GB.
I have had my computer for about 3 months now i am guessing since the first week it came out. About 2 weeks ago i noticed my monitor would go out, i thought it was the monitor. Up until it started when i would start up the computer. The Fans inside would non stop spin and the OS would not Load up the Screen was still Black and not turning on but the power light was on and fans spinning. it would do this to a few other monitors as well. I did apples Hardware Test, 5 times, the extended one and nothing found, no errors. it does it with Apples Ram that i got and with just the 3rd party ram as well with out the apple ram.
I dont know if its the Graphics card because it seems to be cutting off the computer all together. when i am using it sometimes it will just go out on me. the computer light will be on like its on but the screen is out. i also was in mid chat with friends and the would not get my message hoping it was the Graphics card but it seems like it shuts down the whole system.
So yes, i have to restart it about 6 or 7 times for it to get past that Fan Spinning Non Stop stage then it clicks into gear and works. Every morning it works like that. same routine for over a week now.
Any clue as to what it would be? like the mother board or Power supply, i dont know how the power supply would stop the OS from loading and fans spinning but i am at a loss?Mac Pro came out in August '06. This is the 8-core model?
The ATI Radeon can 'suffocate' if the air intakes on the cooling chamber of the graphics card become clogged with dust and unable to cool the card down. Needs to be cleaned from time to time.
Did you do an SMC Reset?
http://docs.info.apple.com/article.html?artnum=304123
Have you been using Hardware Monitor / Temperature Monitor to check on the temperatures of RAM, drives, cpu, etc?
Regular maintenance with Disk Utility and Disk Warrior to repair the drive?
An emergency boot drive?
when you boot from the DVD does it work normal? have you repaired the boot drive from DVD (lacking an emergency boot drive)? How about a clean install on another drive?
Some people use v. 2.1 of smcFanControl to force the fans to run slightly higher to insure that RAM and video card don't overheat.
How is the wall current and circuit? what else shares that circuit? are you on a UPS? (I wouldn't be without one and Mac Pro needs 1200VA.
http://www.apple.com/support/macpro/ -
I cannot get the ipod (older model) to be recognied on my computer operating system 7. It does not light the ipod up or tell me it is even connected with the device update. I don't know what to do. We lost all our music on our old computer that crashed. We just want to back up the ipod so we don't lose 2300 songs. Don't want to start over. Any suggestions on what to do
What did the error message say?
What happens when your you connect the iPod to your computer and restore via iTunes
iTunes: Restoring iOS software -
Macbook pro wont load, just gets to a white screen with apple logo
Hello,
I put my Mac to sleep last night. I am trying to turn it on now but it won't load.
The bar comes up at the bottom, fills about 20%, dissapears and then the spinny globe stays there forever, it will not load.
I have tried booting up by holding shift or x and no change.
Worthy of note, I installed leopard also last night.
Ive tried putting the leopard disc in, its being read but nothing changes on screen.
Ive tried holding command + p + r.
Ive tried unplugging, replugging.
Holding alt and choosing boot from disc or efi boot goes to the same white screen.
Holding c makes the disc drive make alot of noise, same white screen with nothing happening.
Nothings happening
Message was edited by: azz0razz0r, which OS originally came installed on your MacBook Pro?
-
The camera on my phone does not work, just shows the shutter.
I tried resetting the device and even restored from a backup but no luck. I've even tried installing another camera app but still can see. Anyone know if I can just walk into a store and get this sorted?
Make Genius reservation to avoid long wait and take to Apple Store, this will be resolved under Warranty.
-
I Tunes Does not Start, just shows Error Signature!
Hello,
My itunes does´nt start again, out of some reason.
After trying to start Version 6.0 a window opens:
iTunes has encountered a problem and needs to close. We are sorry for the inconvenience.
Then i click for more Info, and the "Error signature" says:
AppName: itunes.exe AppVer: 6.0.0.18 ModName: unknown
ModVer: 0.0.0.0 Offset: 00000000
HEEEEEEEEEEEEEEEEELLLLLLLLLLLLLLLPPPPPPPPPP
And I don´t have nortion!did you fix you problem w/ Error Signature? i'm having the same problem and have reinstalled six times - same result each time.. [email protected]
Hello,
My itunes does´nt start again, out of some
reason.
After trying to start Version 6.0 a window opens:
iTunes has encountered a problem and needs to close.
We are sorry for the inconvenience.
Then i click for more Info, and the "Error signature"
says:
AppName: itunes.exe AppVer: 6.0.0.18 ModName:
unknown
ModVer: 0.0.0.0 Offset: 00000000
HEEEEEEEEEEEEEEEEELLLLLLLLLLLLLLLPPPPPPPPPP
And I don´t have nortion! -
IPod nano does not turn on there is a white screen. What happened?
^^
Hi, DorianSigmaChi.
Thank you for using Apple Support Communities.
I would first start with resetting the iPod. Here is an article that walks you through the process.
How to reset iPod
http://support.apple.com/kb/HT1320
I am not sure what model iPod nano you have, so I will include a couple troubleshooting resources.
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/TS3474
iPod Troubleshooting Assistants
http://www.apple.com/support/ipod/five_rs/
Hope that helps,
Jason H. -
Title. Do I need to take this in to apple?
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
My app store does not load the featured apps. The screen remains empty everytime I open it.
Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom
Maybe you are looking for
-
How to insert an image in a pdf document
I used the "Stamper" example and modified the fuction to insert image to my pdf doc. PDAnnot CreateStampAnnotationAt(AVPageView pageView, AVDevRect *rect) to add a picture Annotation into page. when system calling the callback function "AnnotDraw" to
-
My BT infinity connect is currently running at 0.84 download and 0.54 upload I have the option 3 (unlimited) connection. On Tuesday a BT engineer called to my house he tried to run a sync test on my connection but could not establish sync, he then ra
-
Any antivirus for nokia x2-01 Solved! Go to Solution.
-
Hi all, please help me. I need to know how to create barcode labels in a desktop application and then how to print them out. If anybody can provide me with java code, that will be a great help. I have tried my hand on various progs on different forum
-
How do i resolve script errors when trying to print a web page to my photosmart-wireless attached?
I'm running win7 with a photosmart cn731a (mdl d110a) wireless attached. when I try to print directly from a web page I always get a "script error". Did not have this problem when I was usb attached with same printer.