Genius PenSketch 9x12 drivers for Mac OS Lion

Hi,
     I am unable to find the right drivers to install my Genius PenSketch 9x12 on my MacBook.  The dirvers provided in the CD are not supported (PowerPC applications are no longer supported - message is displayed)
     I downloaded the drivers from Geniius website and installed as per their instructions.  However, tablet is not recognised.  Can any one suggest a solution.
Thanks
YVDV

Hi,
I contacted Genius - they sent some drivers which they claim are working - they even sent some screenshots of installation.  I tried them.  System recognises tablet but the curser is stuck at one side of screen - moving up or down only at the edge.  So no use for me. 
May be you can try and see if it works for you.  else you have a large mousepad the way I use it now.

Similar Messages

  • HT3669 Phaser Tektronix/Xerox 780 - Does anyone know of any drivers for mac mountain lion?

    I have updated to mountain lion and the Phaser 780 no longer works? It just says timed ou, can any one help?
    Thanks.

    As far as I can tell, that printer uses postscript. The only piece of a driver you need is the PPD file that tells the printing system about the specs of the printer.
    You should be able to print by selecting Generic postscript as driver. Try that for troubleshooting.
    Lots of people find that they need to delete and re-add the printer, or Reset Printing System, to get printing to work after upgrading.

  • Netgear w11v2  drivers for mac os 10.2.8 - imac?

    netgear w11v2 drivers for mac os 10.2.8 - imac?

    That's better, there was a "G" and a "1" missing in your original post.
    This Netgear page:
    http://kb.netgear.com/app/answers/detail/a_id/714
    shows the oldest Mac driver that NetGear offers for the WG111, and it requires 10.3 or higher. You have 10.2, correct?
    Google the phrase "netgear wg111 mac drivers" There are quite few discussions--too many for me to read today--in other forums about the WG111 on a Mac and most are not happy ones. Some successes are reported, but by people running higher versions of the Mac OS than you have.

  • Ebay-password Recovery Disc for Mac OSX Lion

    Dear Apple Support Communities: recently on ebay, I have seen several sellers selling a Password Recovery Disc for Mac OSX Lion. This Password Recovery disc claims to be able to reset Lion's password of any user account WITHOUT knowing the old password! Is this possible? This is scary! If so, is there a way to prevent someone from using this disc to reset someone's password without them knowing it? If you want to see for yourself: go to ebay and enter item #  251037274344 for example. There are other sellers also. Thanks.

    Anyone can do this from the terminal without even a CD, so no it's not very scary.
    If they advertised that they could get into file vault, or the keychain, then that would be another story altogether.

  • Wireless usb adapter EW-7711UAn, drivers for Mac OSX 10.9 (Mavericks)

    Hi,
    I have recently got a wifi usb adapter (above indicated) as my airport card is not working anymore and I needed a quick cheap option... After hours and hours trying to make the new device work, it seems the problem is the version of the drivers (there´s not drivers for Mac OSX 10.9) or that´s what I think. Does anyone know something about it? In the meantime I am waiting for an answer from MediaTek (the owner)... I´ll let you know if as soon as I get a reply what happens
    cheers!

    this adapter is using the chip RT2870 of Ralink. You can download its driver for OSX 10.9 frome Ralink website.
    http://www.mediatek.com/_en/07_downloads/01_windows.php?sn=502

  • Drivers For Mac OS X 10.3 (Audigy 7.1

    Hi! I bought an Audigy 7. SE recently to replace a standart built-in sound card in my G4. I chose it keeping the hope that I'll find drivers for it on this website =) Unfortunately, I've made a mistake. I searched Google a lot, but it gave me noothing too. So, my question is - can I find drivers for Mac Os X anywhere?
    looking forward to hearing from U,
    Abadd0N (RUS)

    I don't think so....at least there isn't an official Mac driver from creative. No much of a Mac user myself...so probably see if others can suggest anything to u.

  • Genius Pensketch 9x12 tablet drivers

    First, feel free to move this thread to another board if necessary, I didn't know where to post this. I'm having trouble finding working drivers for my genius tablet. I once found one which worked fine but when I rebooted it was gone, and I got this problem with the Startup Items folder which happens no matter which driver I try to install. Most of them are power PC which is a problem since I have Lion and it's no longer compatible. Did any of you find something to make the tablet work? Mine just won't, and the green light keeps blinking, only allowing me to click with my pen, but not move the cursor. Help please?
    Ps: I know I should ask on a Genius forum as well, but I don't seem to find one.

    Hi,
    I contacted Genius - they sent some drivers which they claim are working - they even sent some screenshots of installation.  I tried them.  System recognises tablet but the curser is stuck at one side of screen - moving up or down only at the edge.  So no use for me. 
    May be you can try and see if it works for you.  else you have a large mousepad the way I use it now.

  • What's the filename of drivers for Mac standard CDC-ECM?

    In System/Library/Extensions, I try to find the default embedded drivers of Mac CDC-ECM which is for USB Ethernet and can't find it.  Besides, there is also a default USB modem driver found by my standard CDC-ECM device.(PID is 900D)  Where are the default drivers and can I remove them ?
    Thanks,
    Jason

    The App Store has no web page. You access it directly from the App Store program in the Applications folder.
    If you bought Mountain Lion through a web site, please provide a link to this "store". If there's any truth to my guess at all, you bought an illegal copy from a site not owned by Apple.

  • Is anyone else having problems with Office for Mac and Lion?

    Since installing Lion 10.7.1 on a macbook pro 2.53 Ghz 4GB 1067 MHz DDR3 I have had no end of problems. Both Excel and Word hang, crash and saving an Excel file is a pain. A 12mb spread sheet just took 4 minutes to save! I have MS Office for Mac 2011 version 14.1.3.
    Another problem that may not be related to Office is that opening Finder is so slow and most of the time it takes a minute to display folders in Desktop or Documents.
    Any suggestions would be welcome .. I regret installing Lion .. I had no problems with Snow Leopard!

    botro wrote:
    I'm unable to install the MS Office 14.1.3 update - I keep getting "Installation Failure"
    I have not found a solution on this board or Microsoft community
    This thread had some things to try.

  • Windows drivers for mac os x (10.7.1)

    i m using mac os x (10.7.1)...i have installed wondows7 in it. but i didnt get that original boot camp cd...so can anybody tell me how can i get drivers for windows7??

    https://discussions.apple.com/community/windows_software/boot_camp
    Ask there and do post your MBP specifics (model, etc...).

  • Dell A920 drivers for Mac?

    I have a dell A920 printer from my old PC, and although I have been successful in installing the drivers in my Windows XP partition of my intel bases Mac Book Pro, I haven't been able in installing it in the Mac OS X system. I have looked in the web and I have found that I am not the only one asking this question but it seems no one has a solution. I would be very grateful if I could use my printer with my new Mac OS...
    Mac Book Pro   Mac OS X (10.4.7)  

    If this is a non-postscript printer, you won't be able to print to it without using a PC as the postscript translator (RIP). Dell doesn't make OS X drivers for non-postscript printers, and no other workarounds have been found.
    Here's how to use the PC as RIP server:
    http://iharder.sourceforge.net/current/macosx/winmacprinter/

  • Where to get Old Oracle Drivers (for Mac)?

    Hi, I need to run an old Mac OS 9 application (actually I'm trying with Classic under OS X on a Mac Mini G4)
    This application needs the OCI library OracleOci73Lib.
    I've been searching it in Oracle web downloads section, but i can't find it.
    I've tried installing the newer OCI drivers, but these are for Mac OS X and I suppose Classic doesn't even "see" them.
    Does anyone know where could I get old Oracle drivers?
    thanks!

    Hi Alexlee,
    Welcome to Lenovo Community!
    As per the query we understood that you are looking for driver to your ThinkPad T430.
    Below is the link to enter the downloads page and download latest application accordingly, please click on "Select Product" then in "QUICK PATH" enter the MTM no. select the exact model.
    http://support.lenovo.com/en_US/downloads/default.​page#
    Hope this helps!
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Blackberry Tour USB Drivers for MAC

    I am trying to revert back to Pockmac for sync (the new BB desktop software is horrendous), does anyone know if I can get the USB MAC drivers for the tour, every link I follow takes me to the download site for the new desktop software. I want the drives only. I tried to unbundle them from the new desktop software but was unsuccessful.
    Thanks,

    A reboot fixed it.

  • When will you optimize Firefox for Mac OSX Lion?

    Mac OSX Lion has hit the Mac App Store. It has several new features for Safari. The features are very cool, and I am hoping that Mozilla is planning on implementing similar features with Firefox. The main ones that I'm looking for is a better full screen mode and disappearing scroll bars.

    No answers, but Mozilla is aware of the new release of Lion, and hopefully are working on solving some of the known issues. There are some rather formal technical discussions and reports, as mentioned in this contributors thread: [/forums/contributors/707160]

  • HP Deskjet 5650 Drivers for MAC 10.6 (Snow Leopard)

    Are there MAC OS 10.6 (Snow Leopard) drivers for the HP Deskjet 5650?
    Message Edited by GaryV on 08-31-2009 09:31 AM
    This question was solved.
    View Solution.

    Gary. Having the same problem. Printer would work on 10.6 but only print black and white. In system preferences / print-fax changed the driver for the printer to HP deskjet 5400 series. It seems to work OK. Been printing from office files, preview and photoshop all OK for now. Hope this helps

Maybe you are looking for

  • Best format for exporting

    Hi, I recorded some video with a Panasonic DMC-LX1 camera which records in .mov format at 30fps, 480x848 (16:9) format. I imported into imovie in DV widescreen format, as this was the only way i could find of keeping the original format without lette

  • Editing FCE audio with Garage Band?

    I've never tried to edit FCE audio with anything except FCE itself and SoundSoap. Can Garage Band edit FCE audio without messing up the video? I seem to recall trying to edit FCE audio with Audacity once, but lost the video information when I saved t

  • I accidentally makerd an intruder and kicked them off with network lock, how do i find them again?

    I accidentally makerd an intruder and kicked them off with network lock, how do i find them and add them again? I can not see them in the network map or anywhere.

  • How do I add MPEG-4 audio to a slideshow in Elements 5.0?

    Hello. Tech notes say MP4 is supported but when I try to add music to a slideshow seems all it looks for is MP3. All the songs in my iTunes are MPEG-4. Any ideas or must I convert back to MP3? Thanks Mark

  • Concurrent manager failover

    hi, I did a cloning and addnode. I enabled Parallel concurrent processing by keeping APPLDCP = ON in context file on both nodes and ran autoconfig. After that if i stop or start concurent manager on one node it stop/start on other node also instead o