Genius SW-HF5.1... on Live 24bit and Audigy

Hi all,
I've tested this set of speakers on those two sound cards ans when I try listening to music or a DVD I still have no sound from both sub and middle speakers. I'd like to have some help please. I tried the same set on my onboard sound card and it works well (an Asus A8N-E Deluxe). I'd prefer my Audigy but it does not work even in BF1942. Tried to update drivers with no result.
Thx anyways guys.
Flussiger Engel
Message Edited by Flussiger-Engel on 01-31-2005 09:23 PM

Oppozith wrote:
My Question is: Li've 24bit or Audigy LS.
Yes I noticed that, but couldn't find any Audigy LS card.
Is it a discontinued model?
I found it priced about the same as Audigy 2 Value
(Audigy LS + Hitman 2 = ~66? vs Audigy 2 Value ~40?)
So why get LS?
For the game shake?
.jtpMessage Edited by jutapa on 03-2-2005 07:59 PM

Similar Messages

Differences between live 24bit and audigy se?

hi!
anyone knows whats the exact differences between the creative soundblaster live 24bit (found in the k8n diamond and p4n diamond) and creative soundblaster audigy se (found in k8n diamond plus)? the chipsets seems to be identical among each other. the specs are also identical.
pls advise.

Quote from: alg7_munif on 29-July-06, 04:00:10
Why my device control on my K8N Diamond plus did not have the decoder tab?
Maybe that's why I can't get 5.1 sound from my digital speaker...
https://forum-en.msi.com/index.php?topic=99326.0
Looks like you don't have the right software drivers installed. Instead of the nVIDIA Audio drivers, you should be installing the Creative Labs drivers from the enclosed driver CD-ROM, the separate one from the MSI disk. Next go to Creatives site and run all the updates from their Auto-update service.
You should be able to select the tab shown above as I also see it. Each selection also works for me so I can say that the Dolby decoding does work.

Live 24bit or Audigy

Please, help me to make a choice. What to buy:
I should look DVD films, to play games and to listen to music.
Thanks.
Sorry for my English - I from Russia.Message Edited by Oppozith on 03-2-2005 0:04 PM

Oppozith wrote:
My Question is: Li've 24bit or Audigy LS.
Yes I noticed that, but couldn't find any Audigy LS card.
Is it a discontinued model?
I found it priced about the same as Audigy 2 Value
(Audigy LS + Hitman 2 = ~66? vs Audigy 2 Value ~40?)
So why get LS?
For the game shake?
.jtpMessage Edited by jutapa on 03-2-2005 07:59 PM

How can I read my incoming emails in one folder?Like I do in Live mail and Outlook express.

Now we can only read emails in different folders if I am managing multiple email accounts.
It does not feel so comfortable as we use Live mail and Outlook express.

'''Unified Inbox for pop and Imap mail accounts:'''
If you use the Unified folder view, this will show an Inbox with all emails from all accounts, with sub folder Inboxes for the individual Inboxes for the various accounts. Then you can choose to view the collective Inbox or the individual Inbox.
This method can be chosen simply and quickly.
* View > folders > Unified
'''Setting up Pop mail accounts to use Global Inbox.'''
Pop mail accounts can be set up to use a Global Inbox in Local Folders.
Imap mail accounts cannot be set up to use Global Inbox, but can use the Unified view.
To change Pop mail accounts to use Global Inbox, you would need to move all emails into Local Folders Inbox.
Then change the settings for each pop mail account.
Tools > Account Settings > Server Settings for the pop mail account
click on 'Advanced' button
select 'Inbox for a different account' and 'Global Inbox (Local Folders)
click on OK
You need to do this for each Pop mail account.
Then close Thunderbird. You must do this before downloading anything otherwise the emails may continue to go to the wrong Inbox.
Wait a few moments for Thunderbird to fully close and then restart Thunderbird.
Please read more info on global inbox here:
* http://kb.mozillazine.org/Global_Inbox

Imac won't let me install Final cut studio 2..it will let me install the upgrade, but it has no live type and i need it to work on my current projects. How do I get Live type back installed in iMac

I just purchased an iMac for home and went to install final cut studio 2 and it gave me an error saying something about "PowerPC" not used or something like that. Installed the studio upgrade just fine...but it has no "Live Type" which I need to work on projects I have been using in my Mac Pro at my work place. How do I get "Live Type" to install in this iMac? Downloaded Live Type upgrade but that won't update cause there's no "Live Type" in the applications.

It sounds like you have Lion installed on your new imac, although your profile says SL 10.6.8 (you may want to change this.)
If you have the Snow Leopard install disc I believe you can install "Rosetta" from the extras folder which will then, if you have the original FCS2 discs , allow you to select and install Live Type and LIve Type content only from the custom install options.
I hope this will work for you.
DM

Error message when I insert a div tag: Couldn't commit the changes made in Live View. Refresh the Live View and try editing again.

According to a web and support forum search, myself and another person, Chloe in the Dreamweaver Club forum, have ever reported this. Trying to follow along a Lynda.com tutorial, and the instructor isn't getting this error. Can't imagine why it's happening. I'd be very grateful for any help. I'm also getting an error dialog message:
DIALOG BOX:
While executing onClick in InsertFGDiv.htm, the following JavaScript error(s) occurred:
At line 687 of file "Macintosh HD:Applications:Adobe Dreamweaver CC 2014.1:Configuration:Commands:InsertFGElement.js": The object is not currently contained in a document.
This appears at the top of the screen:
Couldn't commit the changes made in Live View. Refresh the Live View and try editing again. [Refresh doesn't do anything.]

Try the suggestions here -
Index to Dreamweaver FAQ
The solution for Javascript errors is likely the one.

I keep getting a message saying my protection engine has corrupted and that i should try re-installing live update. What is live update and how do i run it? - be grateful for any help

Hi,
I turn my i mac on and when it has loaded onto the home screen I get a message popping up saying my protection engine has corrupted and that i should try reinstalling live update and my computer will no longer be protected until I do so. Would anyone be able to tell me what live update is and how I would run/reinstall it? - be grateful for any help!!!
Thankyou

It would be a great idea to uninstall Norton - you don't need it and it has a pretty poor reputation for mucking up otherwise healthy Macs.
Have a look at this User Tip from klaus1: https://discussions.apple.com/docs/DOC-2435
To uninstall Norton:
https://support.norton.com/sp/en/us/home/current/solutions/kb20080427024142EN_En dUserProfile_en_us
Edit: To see whether you actually have Norton installed launch Activity Monitor in the Utilities folder. If it's installed you'll likely see some Norton entries there.
Also, in System Preferences>Users & Groups or Accounts, depending on OS)>Login Items, it might be listed.

Live Migration and private network

Is it a best practice to put up a Private Network beetween the nodes in a pool (reserving a few network cards and switch ports for it), to have a dedicated network for the traffic generated e.g. by live migration and/or ocfs2 heartbeat? I was wondering why such setup is generally recommended in other virtualization solutions, but apparently it's not considered strictly necessary in OVM... Why? Are there any docs regarding this? I couldn't find any.
Thanks!

Hi Roynor,
regarding the physical separation beetween management+hypervisor and the guest VMs, it's now implemented and working...
My next doubt on the list of doubts :-) at this point is:
I could easily set up ONE MORE dedicated bond, create a Bridge with a private IP on it on each server (e.g. 10.xxx.xxx.xxx), and then create a Private VLAN completely insulated from the rest of the world.
I'd be putting the physical switch ports where the Private Bonds/Bridges belong to on the same VLAN ID.
But:
- How can I be sure that this network WILL be actually used by the relevant traffic? If I'm not wrong, when you set up e.g. a physical RAC cluster, at a certain point you are prompted to choose what network to use for the Heartbeat (and it will be marked as PRIVATE), and what network will be used by clients traffic (PUBLIC).
In Oracle VM such setting does not exist... Neither during installation, nor in VM Manager, nowhere.
- Apart from Security, I'm doubting that during heavy VMs migration problems could arise, because if the network gets saturated, there are chances that the OCFS2 heartbeat would be somehow "lost", therefore messing up HA etc. This is at least the reason why in a RAC setup a private network is highly recommended.
- I finally found that doc you mention from IBM (thanks for pointing it out!) but my opinion is that THEIR INTENTION was to separate the traffic at the same way I'd like to, but there is simply NO PROOF that such setup would work... They do not mention where you can specify what traffic you want to be on what network...
This is a very important point... I'm wondering why this lack of information.
Thanks for your feedback, btw
Edited by: rlomba on Dec 17, 2009 6:16 AM

XBOX ONE. I have the xbox one and the airport time capsule and cant connect to most xbox live games and zero parties. I have 0 experience in all this but somehow was able to change NAT to open but still wont connect. HELLLPPPP

Okay folks, I need your help out there.
So the nerdy side of me went and picked up the XBOX ONE on release day. Its awesome by the way, BUT..... I cant seem to connect to most xbox live games and absolutely ZERO parties. At first I just thought it was something to do with the xbox itself and would eventually fix itself, but i was wrong. After looking into it on microsoft, i found out that it had to do with my NAT settings on the airport itself. I guess apple and xbox are not compatiable for xbox live and it makes it difficult to have an open NAT setting and is a huge PAIN.
I was able to pinpoint one that the airport time capsule was blocking the IPV6 something or another. Anyways, I unblocked that, and reset the modem and time capsule and jumped on the xbox and now have open NAT settings but still cant connect to multi-player.
Upon further searching, i was told to uncheck the UPNP on my time capsule as well, but have no idea how to find that.
I know it seems confusing, but thats the best i can describe it.
tthanks all

Be a long long time before I see an Xbox One.. but whoever told you to uncheck the upnp in the TC.. tell them their dreamin' .. upnp is not support by Apple in any computer or router, never has been.. Apple deliberately wrote their own version called NAT-PMP to do the same thing.. dynamically open ports at the request of an application or client computer.
So there is nothing like that to uncheck.. and as a matter of interest.. there no box to check or uncheck for NAT-PMP either.. since apple do not believe in end user adjustment of settings.. they simply do not exist.
You will have to manually forward all ports required by the Xbox via the TC. For multi-player games you probably need to open more ports than the standard to allow just xbox live. You will need to check the ports required and open them.
OR
Buy a standard vista UPNP compatible router.. and use that.. and simply put the TC in bridge in the network.
I have not seen posts yet about xbox one.. but there are plenty about xbox and ps3 and the fact that Apple really doesn't give a hoot about games consoles.
This is a good basic post for older xbox.
https://discussions.apple.com/thread/5385065?tstart=0

Font in Design View different from font in Live View and browser preview

My external style sheet has the body set for a sans-serif font and there is nothing to contradict it in the HTML documents. But while I get sans-serif in the Design View (as you would expect), I get a serif font in Live View and Browser Preview, not to mention on the Web itself.
How is this possible (and what should I do about it)?
--Paul

Murray and David: it worked! It is a rare and joyous experience to have a straightforward solution to the sorts of problems I come up with (including other realms). But I have to say that with HTML and CSS (and hence with Dreamweaver), solutions to difficulties have seemed within easier reach than in other parts of the computer world.
By the way, I wanted to choose "correct answer" for both your posts, but after making the first click it was no longer available for the remaining post--so I typed "helpful" even though that one was correct too.
Thanks again.
--Paul

Horizontal menu bar shows serif type font in Live View and Preview but sans serif is in css file

Help I am using the Spry horizontal menu bar and while it is working fine, it is showing a serif font in Live View and in all Browsers even though I have selected a sans serif font. What gives? I have attached the SpryMenuBarHorizontal.css

Add this to your embedded styles:
body {
background-color: #999;
font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
using, of course, the font list you want.
All those styles that rely on the 'default' font will now default to the Trebuchet font list (or to your chosen list).
Beth

Live View and Inspect BROKEN in DW CS5 & Drupal

I successfully navigated through the confusing instructions for setting up a local Drupal website in Dreamweaver's site manager and was very excited the first time I did a "discover" and DW found all the Drupal files on my local testing server. Yay!
I was even more excited when I tried live view and was able to click on elements in my Drupal page and see the CSS properties displayed. (similar to how Firebug in Firefox works)
Unfortunately, my excitement didn't last. The property inspector in DW CS5 is BROKEN. When you click on a specific element on the page, the "live code" displayed for that selection is wrong. DW tends to select far more code than the actual element chosen. As a result, the CSS properties displayed in the CSS panels are wrong for that particular element. Most of the time, they are the properties for the element (<div>) that WRAPS the selected element.
This makes the wonderful, Live View Inspect TOTALLY USELESS, for Drupal development. Didn't Adobe actually TEST this app with Drupal before distributing it? I just spent $600 on an upgrade to CS5 for NOTHING!

Not sure how I could translate the problem into a plain html file, since all the elements of Drupal are served up from a database and php server. Even if I could, I suspect it wouldn't reproduce the problem, since I have no issue with the Inspect button on static html files. One thing to note is that the box model on the selected element seems to accurately reflect the proper CSS settings, even though live code and CSS panels do not. So the out-of-sync issue seems to be between the box model and the live code and CSS panels.
It would be worth your while to set up a live Drupal site. Admittedly, there are a ton of different things going on within a Drupal page, including javascript, which I suppose could throw things out of sync. (although turning off javascript didn't fix the problem) Since Drupal is all open source, it would be easy for me to send a zipped codefile and mysql dump to your developers. Or you could recreate a site from Drupal.org. I have tested this against several iterations of Drupal with several different themes, some simple and some complex, and the problem is pretty consistent, although it behaves slightly differently depending on the Drupal theme being used.
On some themes, Inspect picks LESS than the proper amount of code. On some themes, it picks MORE. My theory is that it's some kind of mathematical or array issue with DW, because Firebug can reliably render all my Drupal sites with no issues at all.
Using the Tag Selector is difficult in most cases, because the Inspect selector tends to select an "outer" div instead of the one that is correct, so the correct selection is not shown on the tag selector list. (since the tag selector only shows outer divs to the currently selected one.) The convoluted workaround is to select an element INSIDE of the targeted element, and then backtrack up the Tag Selector tree. Selecting the proper code with the Tag Selector DOES appear to render the proper CSS and Live Code, but you obviously lose one of the biggest advantages of live view, which is to quickly find the proper element and see the visual box model rendered live.
This one issue will severely limit the attractiveness of DW to Drupal developers. But if you can get it working, I will be singing Dreamweaver's praises all over Drupal.org!
UPDATE: One other clue I just discovered while using several other Drupal themes: When selecting an element, live code appears to miss the first div and instead pick the following div. Example: (note, I'm using parentheses instead of brackets since this forum strips brackets)
(div id=first_div)some kind of text
(/div)
(div class=second_div)more text(/div)
The live code selection is in bold italic. Live code starts selecting AFTER the first div marker and grabs the start of the next div.
Sure seems like a mis-applied array element to me.

In Live View and AV mode on 5DMKII the ISO auto changes to 6400 for no reason, any solutiions?

In Live View and AV mode on 5DMKII the ISO auto changes to 6400 for no reason, any solutiions?

But my current sim card works just fine in my friends iphone 5...wouldnt the logic follow that the problem is with the device itself (the phone) and not the card?

Live Charts and Gauges in Interactive Reporting

Hi All,
Im trying to create a Live chart and a Gauge for my dashboard in IR 11.1.1.3 Ver.
I see the them in the design mode.. but when i try to add the FACT value it doesnt allow me to do it.
Even if i try to see the report in the run mode i get blank screen.
I tried even with a simple result which has
Fact Target
Service1 100
Service2 95
And can i use these Live charts and Gauges with Essbase as the source??
Is there any prerequisite for the Live charts and gauges to display the data..
Any document or post on the above problem will be helpful.

the cannot be any null records in the facts or dimensions used.
are you sure the adobe components are properly installed...can you open/view other analysis that use Live Charts or sliders/guages?
-w

Library empty: live App and content viewer

Hi,
I'm facing a serious problem as our folios of elektrospieler aren"t shown in the App (which is live on the store) nor the content viewer any more.
Library is updating within the branded App "Cannot actualize Library - An error occured" (Bibiliothek kann nicht aktualisiert werden - Es ist ein Fehler aufgetreten).
http://itunes.apple.com/de/app/elektrospieler-games-magazin/id438669889?mt=8
I just updated the App with a binary that I build 1 month ago, but the error was there prior the update.
What can I do? I have no idea why the folios don't even show in content viewer?!
Thanks very much in advance,
Richard

Richard,
maybe, when the issues don't appear in the content viewer anymore this
might have to do with v21, wich requires you to set up the orientations you
want first and then fails to appear on the iPad if you have not added all
orientations.
if your folio is only one orientation and you switched to v21, the folio
settings need to reflect that.
maybe you can try with a new folio, look at the settings in the new folio
window.
this is my initial shot in the dark.
but if you can provide the product Id to James Roche, he might be able to
investigate further.
—Johannes
(mobil gesendet)
Am 14.07.2012 15:56 schrieb "Richard Brammer" <[email protected]>:
Library empty: live App and content viewer created by Richard Brammer<http://forums.adobe.com/people/Richard+Brammer>in
Digital Publishing Suite - View the full discussion<http://forums.adobe.com/message/4557527#4557527

Genius SW-HF5.1... on Live 24bit and Audigy

Similar Messages

Maybe you are looking for