Genuine Toshiba upgrade tells me not genuine

From time to time Windows tells me on startup that my copy may not be genuine and requires activation. I click through to activate and it does it in a split second. Genuine Toshiba Upgrade DVD sent to me from Toshiba. Upgraded from Vista.
Satellite L300 29W.
Not really a problem but it is annoying as I have paid for a genuine copy.
Any ideas why, and how I can stop it?

If nothing else works I probably got one solution.
Just to repeat your problem, you're win 7 tells you it's not genuine right? Not your Toshiba, is it?
Well if Win 7 doesn't work properly, there are two solutions as I see it:
1.) Go to the Windows Wegsite and write to the support team, that problem might have shown up before anyway, but if not:
2.) Go to : http://techpp.com/2010/03/04/new-removewat-windows-7-activation-crack-bypass-kb971033/ (edit --> new version available)
This Program removes the so called WAT (Windows Activation Technology). It can be recovered afterwards if you found another way to resolve the problem.
Using this is only illegal if you are not in posession of a real Win 7 Key.
Hope this helps!
Greets,
R.
Message was edited by: Rough

Similar Messages

  • Not able to download Toshiba upgrades on lap top

    I have a Toshiba Satellite A215.  When I try to download new Toshiba updates that come to be from time to time I am unable to do so. I get a comment box titled, "Toshiba Software Upgrades."  The message then says the following:
    "The Toshiba software upgrades application may not start because the current user has limited rights to system resources."  I own this computer and no one else uses it. I am the administrator. I have tried every trick I can think of to get my computer to allow me to do these downloads. I have never had any problems getting downloads from MS, so i can't figure out what is going on here. Ideas? Suggestions?  Thanks

    Satellite A215-S7425
    We can't see what you're doing. So there's no way to deal with your question.
    In any case, it's best to do it yourself. Go here and check the Support Bulletins for Toshiba updates. Then download them directly from there.
    I rarely update anything unless its broken.
    -Jerry

  • How do I tell iTunes not to install on sync apps that I downloaded?

    I upgraded my SSD on my Mac and I thought I'd download all my apps so they were backed up on my computer. However, now iTunes tries to install them all on my iPhone whenever I try to sync it. I don't have nearly enough space on my iPhone so I always get a bunch of "ghost" apps and an error message that my iPhone is out of space every time I sync. How do I tell iTunes not to attempt to install these on my iPhone on sync? The only options to choose from are "Install" and "Will Install".
    Thanks.
    I have OS X 10.9.3, iTunes 11.2.2 (3), and iOS 7.1.1.

    The easiest way is to simply remove the previous apps from your account, then sync all your apps. You can remove unwanted apps via iTunes. If you want a step by step instructions go to: http://www.cnet.com/how-to/how-to-delete-unwanted-ios-apps-from-itunes/

  • Upgrade with DBUA to 12c hangs while upgrade.xml does not generated

    Hi together,
    actually I've an upgrade problem with dbua. At a server with Oracle Linux 6 I've running an 121.0.2 GI. in that GI there are two Oracle Homes: one 12.1.0.2 wih PSU1 and one 11.2.0.4 with PSU4. I'm trying to upgrade the database "testdb" from 11.2.0.4 to 12.1.0.2 with dbua.
    So I'm logged in and set all session parameters to the new 12.1.0.2 home:
    $ export ORACLE_HOME=/usr/local/oracle/product/12.1.0.2/
    $ export PATH=$ORACLE_HOME/bin:$PATH
    After that I start the dbua. i select my testdb and wait. And still wait..... After selecting the db and dbua has getting al the database information he will hang at 0% by "Run Pre Upgrade Utility". But why?
    So I've looked into trace.log from dbua:
    oracle@testserver- DB_12_1_0_2:/usr/local/oracle/cfgtoollogs/dbua/testdb/upgrade2
    $ ll
    total 96
    -rw-r----- 1 ora121 oinstall    1374   Oct 17 10:56 mapfile.txt
    -rw-r----- 1 ora121 oinstall      104   Oct 17 10:56 preupgdir.sql
    -rw-r----- 1 ora121 oinstall  29326    Oct 17 10:56 sqls.log
    -rw-r----- 1 ora121 oinstall  53994    Oct 17 10:56 trace.log
    -rw-r----- 1 ora121 oinstall         0    Oct 17 10:56 trace.log.lck
    ora121@QUM169 - DB_12_1_0_2:/usr/local/oracle/cfgtoollogs/dbua/testdb/upgrade2
    $ less trace.log
    In the trace.log he tells me, that he weren't able to create a file called upgrade.xml and throws a java exception:
    [Thread-77] [ 2014-10-17 10:56:28.200 CEST ] [PreUpgradeToolGroup.validate:252]  validateConnectionToDB using user:=null
    [Thread-77] [ 2014-10-17 10:56:28.233 CEST ] [PreUpgradeToolGroup.validate:268]  create log dir obj for pre upgrade tool
    [Thread-77] [ 2014-10-17 10:56:28.234 CEST ] [PreUpgradeToolGroup.validate:274]  creating dir object for pre upgrade spool at/usr/local/oracle/cfgtoollogs/dbua/testdb/upgrade2
    [Thread-77] [ 2014-10-17 10:56:28.239 CEST ] [PreUpgradeToolGroup.validate:320]  Executing CREATE OR REPLACE DIRECTORY PREUPG_OUTPUT_DIR AS '/usr/local/oracle/cfgtoollogs/dbua/testdb/upgrade2'  using SQLEngine.
    [Thread-77] [ 2014-10-17 10:56:28.244 CEST ] [PreUpgradeToolGroup.validate:362]  validationLogDir =
    [Thread-77] [ 2014-10-17 10:56:28.244 CEST ] [PreUpgradeToolGroup.validate:376]  Preupgrade Utility used= /usr/local/oracle/product/12.1.0.2/rdbms/admin/preupgrd.sql
    [Thread-77] [ 2014-10-17 10:56:29.742 CEST ] [PreUpgradeToolGroup.validate:462]  Executed Pre Upgrade Script successfully, now load MEP............
    [Thread-77] [ 2014-10-17 10:56:29.742 CEST ] [DbuxUtils.writeRootElementForUpgradeXML:509]  Passed in upgrade xml file /usr/local/oracle/cfgtoollogs/dbua/testdb/upgrade2/upgrade.xml does not exist.
    [Thread-77] [ 2014-10-17 10:56:29.742 CEST ] [PreUpgradeToolGroup.validate:479]  Executing preupgrade tool
    [Thread-77] [ 2014-10-17 10:56:29.743 CEST ] [PreUpgradeToolGroup.validate:480]  Spool file /usr/local/oracle/cfgtoollogs/dbua/testdb/upgrade2/upgrade.xml
    [Thread-77] [ 2014-10-17 10:56:29.743 CEST ] [DbuxUtils.getPreUpgradeLoader:236]  upgrade.xml does not generated
    [Thread-77] [ 2014-10-17 10:56:29.743 CEST ] [PreUpgradeToolGroup.validate:487]  Executing Preupgrade tool failed..Upgrade xml does not exist
    [Thread-77] [ 2014-10-17 10:56:29.743 CEST ] [PreUpgradeToolGroup.validate:491]  upgrade.xml does not generated
    [Thread-77] [ 2014-10-17 10:56:29.745 CEST ] [SQLEngine.done:2278]  Done called
    Exception in thread "Thread-77"
    java.lang.NullPointerException
            at oracle.sysman.assistants.dbma.wizard.view.ValidationPage.prepareMaps(ValidationPage.java:1989)
            at oracle.sysman.assistants.dbma.wizard.view.ValidationPage.check(ValidationPage.java:1651)
            at oracle.sysman.assistants.dbma.wizard.view.ValidationPage$Check.run(ValidationPage.java:2040)
            at java.lang.Thread.run(Thread.java:682)
    But why? Does anybody know that error?
    Thanks a lot for help and regards,
    Dave

    Yep they are! The own group they weren't in was the asmadmin group. Amusingly I had to add them both to the asmadmin group, so that the upgrade.xml was created with the oracle 12c user and group oinstal and not with oracle 11g user and group asmadmin. I can't tell you really, why, because it is a little bit confusing why he generate a file with the correct group when I add that group to the user, which was assigned wrong before to the file ?!?!

  • Toshiba L305-S5968 will not let me do a system recovery

    Toshiba L305-S5968 will not let me do a system recovery. It started out just an occasional vista crash. Then it became more often then even mpore often. Went to microsoft becasue I thought it was a vista problem as so many people was having same issues. Tried some suggestions (disabled superfetch svc) checked event log but was always something differenent that made it crash. No new hardware was installed. Went to western digital and HDD diagnostic said harddrive was good. Well now I cant even boot into safe mode maybe I waited to long to try and do the recovery. I did a full recoery about a week ago but it still did the same thing. when I run a system file check after doing a full recovery it says,"WRP found corrupt filesbut was unable to fix someof them.Details are included in the CBS.Logwindir\Logs\CBS\CBS.log." I was unable to view files because it said programs unable to view. Now I cant even get safe mode as it start loding the drivers it hangs on \windows\system32\Drivers\Avgidshx.sys everytime. then will bluescreen. I've tried to get there by pressing 0 on keyboard and power it up. but after a few it asks for the hdd password to continue so i have to stop pressing the 0 key and then doesn't ever go to recovery. Please help.

    But Jerry why would i immediately after the full recovery still have the corrupt files i have managed to see what files they through advice if microsoft on how to view the protected files and i'll post the results because they don't really tell me much, here they are :2012-07-25 02:16:02, Info        CSI    000001b5 [SR] Repairing 1 components
    2012-07-25 02:16:02, Info        CSI    000001b6 [SR] Beginning Verify and Repair transaction
    2012-07-25 02:16:02, Info        CSI    000001b8 [SR] Cannot repair member file [l:24{12}]"settings.ini" of Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2012-07-25 02:16:02, Info        CSI    000001ba [SR] Cannot repair member file [l:24{12}]"settings.ini" of Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2012-07-25 02:16:02, Info        CSI    000001bb [SR] This component was referenced by [l:158{79}]"Package_16_for_KB948465~31bf3856ad364e35~x86~~6.0.1.18005.948465-49_neutral_GDR"
    2012-07-25 02:16:02, Info        CSI    000001bd [SR] Repair complete
    2012-07-25 02:16:03, Info        CSI    000001be [SR] Committing transaction
    2012-07-25 02:16:03, Info        CSI    000001c2 [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction  have been successfully repaired

  • Skype 6.3 upgrade for Mac not working

    [Topic title updated by moderator to be more descriptive. Original topic title was: "Skype upgrade for Mac not working"]
    BE WARNED - just because you are being asked to upgrade your Skype, it does not mean it will work on your machine. I am a fairly regular user of Skype and this morning was unable to log-in, being told that I needed to upgrade. I did so to 6.3.0.602 but I was unable to log-in once the software had downloaded. After some research on the forums and finally a text chat with Support, I was told that Skype 6.3.0.602 requires a Mac OSX of 10.9 or above - I have 10.5.8
    "So what can I do", I asked the tech support. The answer is nothing (unless I get new OS X software) - there is no Skype software programme that supports my operating system and no timeframe for when it might be available.
    Huh? That's right. It's just not available. So for now, users with less than OS X 10.9 will be unable to use Skype when they are instructed to upgrade. It really doesn't make sense. But just so you know....

    jessicaed wrote:
    BE WARNED - just because you are being asked to upgrade your Skype, it does not mean it will work on your machine. I am a fairly regular user of Skype and this morning was unable to log-in, being told that I needed to upgrade. I did so to 6.3.0.602 but I was unable to log-in once the software had downloaded. After some research on the forums and finally a text chat with Support, I was told that Skype 6.3.0.602 requires a Mac OSX of 10.9 or above - I have 10.5.8
    "So what can I do", I asked the tech support. The answer is nothing (unless I get new OS X software) - there is no Skype software programme that supports my operating system and no timeframe for when it might be available.
    Huh? That's right. It's just not available. So for now, users with less than OS X 10.9 will be unable to use Skype when they are instructed to upgrade. It really doesn't make sense. But just so you know....
    Please look at the top of the community page, and you will find a box "Search:". Write your problem here "Upgrade not working" and see what crops up. Most likely you will be taken somewher like here: http://community.skype.com/t5/Mac/quot-We-ve-signed-you-out-because-your-using-an-outdated-version/m...  
    Here you will read that the latest versions of Skype will not work on some of the versions of MacOS, and that PPC requires one version, Leopard another, Snow leopard another, Mountain Lion another. They are indoctrinated with a stamp in their forehead to enforce their congregation of true believers to install the latest with all "security fixes" or death is looming. They are not used to software that is 2 years old. 
    So, with Mac, we have different operating systems and different sets of libraries - and things may go belly up if you upgrade - a OS feature is done differently, a libary has been placed inside the OS, and is no longer needed - and if you try to use it, you will be trapped.
    Install the latest version that works for your Mac, and make sure to freeze this. Update the "info.plist" file and tell Skype that you use their latest should they pry. As long as it works, do not change anything!
    And make the change to stop Skype from checking every time you start.

  • Why does SMS tell me "not allowed" when I try to add an existing contact to one of my SMS Groups?

    Why does SMS tell me "not allowed" when I try to add an existing contact? 

    If you are running Tiger, you don't have time machine. 
    You need to get something like SuperDuper! or Carbon Copy Cloner (sorry, I don't have a handy link for CCC but you can Google it to get their site) to make a clone of your drive on the external and then do incremental backups.  The free versions do a lot and you can upgrade to the full-service versions for small change if you need more.  The one time I used SuperDuper! for cloning a volume it worked just fine. 
    (My backup application is the last PPC capable version of Retrospect, which does a credible job, or has over the past ten-twelve years.)

  • After Mavericks upgrade Mail 7 not automatically fetching new emails

    Hello,
    Since the Mavericks upgrade, Mail is not anymore automatically fetching new emails, but at the initial lauch.
    I tried to modifity the settings, from 'Automatic', to 5 minute, to 15 minutes, stopping Mail and starting again each time but it does not help.
    Emails are fetched only after the lauch of Mail, and when I manually ask Mail to do it.
    It's really annoying.
    I saw on French forums, that I'm not the only user reporting this, but I don't see many posts on the Apple forum with the exact same issue.
    I don't know what to do to fix/find a workround for this problem.
    If someone has any idea, I'm more than open to try it.

    Try this workaround until Apple fixes it.
    Copy this into a plain text file (i.e TextExit in plain text mode)
    Save as com.yourname.Checkmail.plist to ~/Library/LaunchAgents/
    Log out and back in, or re-boot
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
              <key>Label</key>
              <string>com.yourname.Checkmail</string>
              <key>ProgramArguments</key>
              <array>
                        <string>/usr/bin/osascript</string>
                        <string>-e</string>
                        <string>tell application "Mail" to check for new mail</string>
              </array>
              <key>StartInterval</key>
              <integer>60</integer>
    </dict>
    </plist>
    This is set to check every minute (<integer>60</integer>), change to your needs (in seconds)

  • L500D-ST2543 Processor upgrade excursion finished -- not to bad

    Ok, so i finished my upgrade excursion. Not to bad but time consuming because of the about 40 screws. It all went very good except i missed 1 screw underneath the hard drive and broke the mount taking it apart. I first took the K/Board off expecting to find just a piece of that black cellophane with the processor right there on the left. That did not happen, its solid plastic (the case) under the K/B and there is nothing there but the wireless card. So i put it back together (mistake) the K/B has to be off to get the board and bottom of shell off. Then you disconnect the board from the bottom part of the shell, the processor itself is on the bottom of the board. Down and up was about 3 hrs or so.
    When i rebooted i got a "Bios Mismatched" error from windows. It did its lets load new hardware thing and rebooted and all is fine now. I went with a 2.5 (Caspian) which was not offered when i bought mine (L500D-ST2543)  2.3 was as high as Toshiba offered and that was 200 bucks more. I got my processor by fluke off eBay for $20. I offered the girl $75 to close the auction early and she told me no, it had 3 viewers and i was the only bidder. These are still like 200 new.
    Ok so no i am rebooted and the fan is barely running, i'm getting nervous. It ran loud and fast before this, i loaded up Hard ware monitor and find its running  a lot cooler now and the fan just didn't need to run. I wasn't thinking about the fact i just replaced that crap heat sink paste they use with real stuff and that's why it was running cooler.
    So all in all, $20 for the processor, $40 for 4GB of memory, did all the work my self and saved about $300
    For processor up grades, stay in the same family like, caspian, lion, geneva,. I went from a single core Sempron to a dual core Turion II Ultra, but everything (wattage, volts) was about the same because they are both Caspian series
    http://en.wikipedia.org/wiki/List_of_AMD_mobile_microprocessors
    Well hope someone finds this post useful,
    Andrew
    edited here; The one thing i forgot to mention is you will need to lightly tape the volume dial wich looks like a "Spacely sprocket"(the dial that come out the front of the laptop) to the board. I used a piece of tape a littel thicker than a tooth pick and then once i got everything back together i just pulled the tape off. Thats why you don't want to use to much tape. They must use magic to put this in at the factory or a long set of tweezers wich i have but can't find.

    Holy smoke! You have Tiger running on a Lombard?
    XPostFacto is a wonderful thing. I set up a friend's two Wallstreet G3s with 10.3.9 ("official" max OS is 10.2.8) using XPostFacto and they both run better under Panther than they even did under Jaguar.
    Info here:
    http://eshop.macsales.com/OSXCenter/XPostFacto/Framework.cfm?page=XPostFacto3.ht ml

  • M300 keep getting stuck at startup after running Toshiba Upgrade Asst

    Hi,
    I've just bought a copy of Windows 7. I ran the Windows 7 Upgrade Advisor and it recommends me to visit Toshiba page, where I found the link to download Toshiba Upgrade Assistant to prepare my Satellite M300 to upgrade to Windows 7. I managed to download all the required software. Everything was running smoothly up to the part where the Assistant is installing some components and restarted my laptop. The OS went through the usual booting up procedure and there was this "Please wait..." screen just before the login screen, and that screen just seems to run forever. I have tried letting it run for more than a few hours, but the Vista screen was still there, minus the "Please wait" wording.
    I tried booting from safe mode and was able to get into desktop. I was able to run finish the Toshiba Upgrade Assistant from safe mode, although I notice that there weren't any components that were required to install. The ethernet controller was strangely missing. Unfortunately I can't install Windows 7 in safe mode.
    Is there any solution other than bringing it down for to the customer service centre?

    As far as I know Portege M300 is not covered with this Win7 upgrade program.
    Am I right about that?

  • I can't update apps. Tells me not available for this apple ID as it was bought by a different user or item refunded or cancelled?

    Unable to update apps.  Tells me not availabe for this Apple ID as it was bought by a different user or item was refunded or cancelled?

    Demo, thanks for the response.
    Unfortunately none of your suffestions work.
    The AppleID has only been set to one country.  Several purchases are not visibile when I look at the purchases made with the AppleID.
    I get exactly the same error regardless of where I try and download the update from (from within ITunes (10.9.2), from the upgrade pane or from the software description pane.
    @leinaday; yes a fix is most certainly required.
    Issue started 07-May-2014 despite successful upgrades of the apps in question in the past.

  • Error Message: "This upgrade path is not supported"

    Scenario
    During the process of upgrade to Windows 10 Technical Preview, we may encounter the error “This upgrade path is not supported. Please close Setup and re-launch from the root of the media or go back and pick a different installation
    choice.” in the Compatibility report.
    Analysis
    Step 1: Perform the scenario 1: the upgrade installation fails.
    Reproduce this error following the steps below:
    Download the Windows 10 Technical Preview ISO installation file.
    Extract the ISO installation file to C:\New folder, and now the location of the installation file is
    C:\New folder\9841.0.140912-1613.FBL_RELEASE_CLIENTENTERPRISE_VOL_X64FRE_EN-US\.
    Click setup.exe from the installation file, and then click
    Install now.   
    Setup is starting, and then get two options Upgrade and
    Custom which is the classic setup wizard which we can see during booting from DVD.
    Click Upgrade to run upgrade installation, however, the error occurs.
    It seems that it is impossible to perform upgrade installation to Windows 10 Technical Preview, although it is fine to click
    Custom to perform clean installation which cannot keep the personal setting and applications.
    However, what we want is upgrade installation, not clean installation.
    Step 2: Perform the scenario 2: the upgrade installation works fine.
    If extract the ISO installation to C:\New in the above step2, click the
    setup.exe from the installation file C:\New\9841.0.140912-1613.FBL_RELEASE_CLIENTENTERPRISE_VOL_X64FRE_EN-US\, the upgrade installation would work fine, which is as shown the following two figures:
    Step 3: Check the setupact.log
    file which contains information about setup actions during the installation of the two scenarios.
    Scenario 1: Check the setupact.log file of the scenario 1. The detailed information is shown as below:
    2014-10-14 19:03:40, Info UI Determining whether we should run ConX or legacy setup
    2014-10-14 19:03:42, Info UI Will launch ConX setup experience
    2014-10-14 19:03:42, Info UI Launching ConX setup experience
    2014-10-14 19:03:42, Info UI Launching C:\New folder\9841.0.140912-1613.FBL_RELEASE_CLIENTENTERPRISE_VOL_X64FRE_EN-US\Sources\SetupPrep.exe
    2014-10-14 19:03:44, Info UI Unknown command line for ConX setup experience. Launching legacy setup experience.
    2014-10-14 19:03:44, Info UI Determining if we are in WDS/Unattend mode
    2014-10-14 19:03:44, Info UI No need to hide autorun
    2014-10-14 19:03:44, Info [0x0a000a] UI Autorun:Autorun core successfully initialized!!!
    2014-10-14 19:03:44, Info [0x0a000b] UI Autorun:Autorun UI successfully initialized!!!
    2014-10-14 19:03:44, Info UI AppWindow has layout style 0
    2014-10-14 19:03:45, Info UI NavWindow has layout style 0
    2014-10-14 19:03:45, Info [0x0a011c] UI WizardDialogPost::SetActive
    2014-10-14 19:04:57, Info [0x0a018e] UI Passing command line parameter ("C:\New folder\9841.0.140912-1613.FBL_RELEASE_CLIENTENTERPRISE_VOL_X64FRE_EN-US\Sources\setup.exe /HideWelcome /uilanguage:en-US /targetlanguage:en-US") to IBS.
    Scenario 2: Check the setupact.log file of the scenario 2. The detailed information is shown as below:
    2014-10-14 19:08:04, Info UI Determining whether we should run ConX or legacy setup
    2014-10-14 19:08:05, Info UI Will launch ConX setup experience
    2014-10-14 19:08:05, Info UI Launching ConX setup experience
    2014-10-14 19:08:05, Info UI Launching C:\New\9841.0.140912-1613.FBL_RELEASE_CLIENTENTERPRISE_VOL_X64FRE_EN-US\Sources\SetupPrep.exe
    According to the two logs, we can get the following points:
    In scenario 1, it would invoke the SetupPrep.exe in the source folder directly to perform an installation preparation. However, it failed to recognize the path
    C:\New folder\9841.0.140912-1613.FBL_RELEASE_CLIENTENTERPRISE_VOL_X64FRE_EN-US\Sources\SetupPrep.exe. Then it would launch legacy setup.
    In the scenario 2, Windows setup would be redirected to the ConX setup to perform upgrade installation automatically.
    So, what is the difference of the scenario 1 and 2 to bring the different results of upgrade installation?
    Workaround
    Based on lots of testing, we find that if there is no space in the extracting location of the ISO installation
    file, the upgrade installation would work fine.
    What’s more, we can get the meaning of the two setup models in the setupact.log:
    Legacy setup: it is same with setup from DVD boot.
    ConX setup: it would check the compatibility and language UI for upgrade preparation, then perform migration and upgrade directly.
    Additional Resource
    From the release of Windows 10 Technical Preview, many users have installed and tested Windows 10 Technical Preview, we still hope more and more users would download and install Windows 10 Technical Preview for test, and provide
    us your feedback.
    Download Windows Technical Preview
    http://windows.microsoft.com/en-us/windows/preview-iso
    Download Windows Technical Preview for Enterprise
    http://www.microsoft.com/en-us/evalcenter/evaluate-windows-technical-preview-for-enterprise
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Hello,
    I would guess that existence of a space in the folder name is what the issue is.  Try removing the space from the folder name and see if works. New_Folder for example
    Thanks, Darrell Gorter [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights.

  • After upgrading to Lion, not able to use Quicken 2007.  Get the following message: PowerPC applications are no longer supported.  Anyone has a solution?

    After upgrading to Lion, not able to use a PowerPC Application (Quicken 2007).  Any solution?

    Quicken Essentials 2010 has less features than Quciken 2007.  Keeping track of investments is one feature I need and Quicken Essentials does not include that function.  I may have to consider others financial software, such as iBank4, Money4, iFinance, and Money Well.

  • How do I tell iphoto NOT to load ALL images from camea and iphone, only new images?

    I've bee using my MacBook Pro, iphoto and Nikon for many years. I travel alot and take many pictures, and like to keep them on the memory cards as an extra backup. All was going great on a recent trip, until one day, suddenly, when I plug camera into computer, iphoto opens (as usual) but it starts downloading ALL of the old images on the memory card instead of just the ones that have not already been imported! It takes forever when you are using a 16GB card!! Is this due to some update I installed? How do I tell iphoto not to do this?! I only want to see images not yet imported, as it used to be. I am using OS X 10.6.8 and iphoto '09 - 8.1.2  And, this same thing is happening with my iphone, and my other camera.

    iPhoto does read all images (how else can it know if it has already imported them or not) and then gives your oppertunity to import new, all or selected
    Yes it does take a bit to get all images and see what needs to be imported - I use 32 GB cards - and the other issue is that if you delete impoprted photos next time you use the card the deleted ones will be in the new list so you have to select the rest and import selected - I've found no solution to this
    LN

  • I sign in tol my Firefox is out of date. did try to do the upgrade but did not work need help

    ''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/978554 /questions/978554]''
    I need help to get my sign in working. Need to upgrade?
    how to do that?
    <sub>edit: removed personal information for your protection. (philipp)</sub>

    I sign in told my Firefox is out of date. did try to do the upgrade but did not work. Need help
    Let me know how to get my sign in working

Maybe you are looking for

  • W\RT 160N

    I have set up a WRT 160N for WEP128  bit security.  A new HP desktop with wireless N, a legacy HP, bu\ laptop, and a HP Officejet HP7410 all-in-one, and my iPhone connect just fine.  My new Dell Studio will not connect.  I have set it up with the WEP

  • RE: (forte-users) SAX Parser

    I would be interested to see TechNote 11811. I just tried the Forté support web site and couldn't get it. Can anyone help? Thanks, Nick. -----Original Message----- From: Zee Khan [mailto:[email protected]] Sent: Tuesday, August 24, 1999 10:08 AM To

  • Not being able to sign in to BT email.

    Hello All. I am taking the time to post this,as it may help others,I can't be the only one with this issue. I am an old talk21.com user,set up the direct debiting order last May and am currently on my first year free offer. I get the spams that other

  • Iphoto corrupting photos from iPhone?

    Some others have mentioned similar problems: anyone find a good solution? Running iphoto 08, when uploading photos from iphone 4s about 1 in 4 get corrupted: lines or washed out colors and many videos fail to import. It seems hit or miss: does not al

  • Downloaded raw 7.1 to my cs4 and can't open raw files taken with nikon d5100.  d70 raw files do open

    Need a solution to above question.