Geo Location Custom Form is not Being Used

Hi Experts,
I extended the Geo Location class and added a few fields that I needed. Also in the same XML/MP I added a custom form for it using Authoring Tool. Imported the management pack and didn't get any error. But when I open any locations still it uses the default
form rather than the custom one I created. Is there any dll or any other file that I should inject into SCSM folder? Is there any where I can troubleshoot why my custom form is not loading.
My SCSM is 2012 R2 with UR5 and Authoring Tool is on version 2012 R2 (7.5.3079.0).
Thank you
Soroush

Hi,
How ahout adding the custom filed to extend the existing form?
You can refer to the link below as an example:
Adding a custom field to Incident Forms
If you are creating a new form template, you may refer to below link:
http://blogs.litware.se/?p=1402
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

How to check customer reference no. not being use more than once

I have the following situation and appreciate if some one could show me a simple solution.
On the Sales order window, when user enter a value for Customer Ref. No, check if the entered value has already been used on any existing Sales Order, and give message eg. this Ref. No already been used in SO. 257
What is the easiest way of implementing the validation?
Using Formatted Search?
Triggers or Stored Procedure?
Or one must go about doing this simple task using SDK, DIAPI?
sample code illustrating solution would be much appreciated.
I tried to create a query and used it with Formatted search on the Field, but failed on an error.
the code using temporary hard coded value instead of $[$x.0.0] looks like this
if (SELECT    COUNT(*)
FROM         dbo.ORDR
WHERE     (NumAtCard = 'AAA' and CardCode ='1234')
) =0
     Begin
                   select 'AAA' --redisplay value
     end
else
              begin
SELECT     TOP 1 'already used in SO '+ Convert(Char(3),DocEntry)
FROM        dbo.ORDR
WHERE     (NumAtCard = 'AAA')
         end
where 'AAA' is the reference no. to check for customer '1234', this code works when I run it in SQL query analyser, but failed when I run it as query in Business one. the idea was to redisplay the entered No. 'AAA' if it is not found in any existing SO for cust ='1234'
can anyone point out what the error is or show alternative code for the query.
thanks

Hi Andy,
I believe the best way to do this is probably to use the SDK as (to my knowledge) this is the only way you can get a message to be displayed and to stop the actual processing of the document.
If you want to go the formatted search route I would suggest you change your query a bit. I have played with your query and the following is an example as I got it working in SBO. I think SBO gets confused if there is more than one select statement that returns a result and I have started using variables to save the results of the select statements in.
[code]Declare @Val varchar(100)
declare @Count integer
set @Val = $[$14.0.0]
if (SELECT COUNT(*) FROM dbo.ORDR WHERE (NumAtCard = @Val and CardCode = $[$4.0.0])) > 0
begin
SELECT TOP 1 @Val = 'already used in SO '+ Convert(Char(3),DocEntry) FROM dbo.ORDR WHERE (NumAtCard = @Val)
end
select @Val[/code]
I hope it helps a bit,
Adele

How to tell which Indexes are not being used?

We are a large development shop and have many customers. Our database design is very generic so that it works for all of our customers. Each night we use an SSIS ETL process to bring down large amounts of data from the iSeries into SQL. One
particularily large customer takes a very long time and we are looking for ways to speed up thier data import and transformation. I would like to see which indexes he does not use and possibly remove them. Each night we fully repopulate hundreds of staging
and ods tables and incrementally delete and repopulate the days work for a handful of history type tables. Removing some indexes off of the large tables could make a big impact.
How can i tell which indexes the customer does not use?

> IDENTIFYING UNUSED INDEXES IN A SQL SERVER DATABASE
Just because an index is not being used does not necessarily mean it should be removed.
> Index This: All About SQL Server Indexes
sp_BlitzIndex
José Diz Belo Horizonte, MG - Brasil

Why is the template not being used when dynamic page called ?

Hi,
I have created a dynamic page and assigned a template to it. When I call the dynamic page using the 'show' procedure from a form, I do not see the template.
Why is the template not being used ? How can I get the template working when I call the dynamic page ?
I even tried to show the page from the dynamic page's manage components tab and there is same problem. Template is not being used.
thanks,
Mainak

You can alter the generated package body to include the following function in the header and footer sections.
Header:
PORTAL.wwv_headings.show_header(
p_template => 'PUBLIC.TEMPLATE_3',
p_heading => 'Dynamic Page',
p_help_link => 'PORTAL_DEMO.EXAMPLE_DYNAMIC_PAGE.help',
p_about_link => 'PORTAL_DEMO.EXAMPLE_DYNAMIC_PAGE.about');
Footer:
PORTAL.wwv_headings.show_footer(
p_template => 'PUBLIC.TEMPLATE_3',
p_help_link => 'PORTAL_DEMO.EXAMPLE_DYNAMIC_PAGE.help');
where
<PORTAL_DEMO> indicates application schema
<PORTAL> indicates the name of the portal (normally this will be portal30 by default).

Cannot delete an old vault that is not being used.

Cannot delete an old vault that is not being used. I get the following notification: The operation can’t be completed because the item “#3 Vault-GTech RAID mini-1TB” is locked. I placed this vault on a external HD until I set up a new vault with the same name in Aperture.
Now I want to delete the older Vault. Any suggestions? Thank you, Bob Stern

OK think I have it, but you'll need to use the terminal window and sudo to do this If you never used either then read this carefully before you begin.
start
Open a terminal, go to /Applications/Utilities and click on the Terminal app.
Type the following but do not press return: sudo chflags nouchg
Make sure to enter a space at the end of the above command
Go to Finder, locate the vault and drag it to the Terminal window at the end of the above command. The mouse pointer will turn into a green plus sign showing you your are dragging the file.
When you let go the full path of the vault will be at the end of the command, now press return.
If this is the first time you are running sudo you'll get some text telling you to be very careful. You'll also be prompted for your password, enter it.
Back in Finder in the Info window for the vault the Locked checkbox should be clear.
that's it
good luck, post back if you have any troubles.
regards

Error during transformation : Source parameter is not being used

Hi,
I am trying to map two fields from datasource into one field in DSO i.e
Assigned Plant and storage location to Plant_storage infoObject.
but I am unable as I am getting the error below.
Rule (target: ZOBJ): Source parameter 0140 is not being used
Message no. RSTRAN502
Procedure for System Administration
Internal rule ID 68
I have checked online and seen related SAP notes but they are meant for BW 7.0. My system is BW 7.3
how can I resolve this issue.
thanks
Bhat

Hi Bhat,
When you are using two source fields are you doing the result calculation through routine or formula?
Just check if you are using any of these thing then both the source fields are getting used in the routine code.
Regards,
Durgesh.

Parameter value from app is not being used

Hi,
I have .NET application which renders the report from BOE using infoObject model. This report has parameter and the paramter info is passed from the application using following code.
CrystalReportViewer1.EnterpriseLogon = enterpriseSession;
CrystalReportViewer1.ReportSource = (Report)infoObject;
CrystalReportViewer1.ParameterFieldInfo = parameterFields;
But when I try to run this form...though the parameterfields have the detail of the paramter still Promt screen is scheduled by BOE to provide input for the parameter...
Can someone help me on this why the parameter value I am sending is not being used.
Thanks
Kajal

It might have something to do with how you are creating your parameter field collection that you are passing to the viewer. Please refer to the ViewReportParameter sample in the following collection available [here|https://boc.sdn.sap.com/node/5794]

My ipad 2 will cut off completely if not being used for a while. you have to hold power button to power up everytime. anyone else having this problem? thanks

My Ipad 2 will shut completely down if not being used for a while. You have to hold power button down for several minutes before it will power back on. anyone else have this problem and know how to fix? My other sons ipad 2 doesnt do this and they have both had updates and are same generation.
Thanks

I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot!

Ultra low frame rates, GPU not being used

While using After effects during playback, I am getting about 10-4 FPS. With frame rates that low it's basically impossible to make any videos. I am using a desktop gadget to monitor GPU usage. I noticed that my GPU is not being used at all, 0% usage and only a few MB of memory being consumed out of 4 gigs of GDDR5. I called Adobe customer service and basically I was told that After effects only uses as much GPU power as it needs to. Ok, that makes since and If I was getting 30+ FPS then I wouldn't care, but it seems odd to me that After effects is running so poorly and not using my GPU. If my GPU was maxed out, then I would understand I need a more powerful GPU to improve frame rates, but since my GPU is not being used at all, not even a bit then I don't think it's a hardware problem, but some sort of setting that is not right. The only thing I could think of is that my HDD is pretty slow or that GTX cards are not designed to run Open Gl and maybe that's the problem, but I double checked the Adobe website and GTX cards are supported. Also I downloaded some other GPU monitoring software to double check and both the Desktop gadget and the GPU software monitor show no activity. I am really new to After effects. Thanks for help.
Specs:
64bit win7
8 gigs
760
4670k

That's because it appears that you're using AE incorrectly. I bet you're assuming that if you hit the space bar, AE plays back video like a video editing application.
Well, it doesn't.
AE is an effects, motion graphics and compositing application. It's designed to do completely different things than an editing application does. Hence, it doesn't work like an editing application does. For example, IT DOESN'T PLAY BACK VIDEO IN REAL TIME. That's why you got that getting started link. At least do yourself the favor of reading how AE works.
And for the purposes of this thread, it wouldn't hurt you to learn how to RAM Preview: hit zero on the numeric keypad and see what happens. It's just one of the many basics you need to know before you jump into the deep end of the pool with AE.

Materialized view not being used in the report

I have had a materialized view (MV) for a particular report. Recently, the report definition has changed little bit, so the existing MV is not being used by the report anymore. I copied the code Discoverer's SQL Inspection and recreated the materialized view. But still it is not working. Obviously, I am missing something at the database level. Does anyone have any idea? The database is 9i and Discoverer is 9.0.2. Thank you!

The SQL that you see from the Inspect SQL option will provide you with the SQL that Discoverer sends to the database. The database then may do a query rewrite to point to an available materialized view if available. This rewrite won't be seen from the inspect sql option. You need to check at the database level to verify if a query rewrite did in fact take place.
You may want to check the section titled "Query Rewrite with Materialized Views" from Ch1 - "Introduction to the Optimizer" in the Oracle9i Database Performance Tuning Guide and Reference, Release 2 (9.2), Part Number A96533-02, available at http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96533/optimops.htm#37287
Regards
Abhinav Agarwal
Oracle Business Intelligence Product Management
http://www.oracle.com/bi
http://www.oracle.com/technology/documentation/bi_ee.html
http://www.oracle.com/technology/software/products/ias/htdocs/101320bi.html
http://oraclebi.blogspot.com/

How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activ

How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activated. HELP? I really need to continue using this product for my home business.It works fine not activated but the threat is that it will stop working in 13 more days if I don't get it activated, and none of the activation methods they list seem to work.

The new serial number is to the right of your chosen download.

Target parameter is not being used

Hello,
while activating the transformation, i get an error saying" Target parameter 0058 is not being used". I have checked all the rules, infoObjects etc. but still im not able to activate the transformation at all.
Eventhough the source field-target field mapping is correct, the system is throwing such errors. What could be the possible cause of it. Any idea?
Regards Sucheta

Hello Sarvanan,
What do you mean by "the respective field not having the Unit/Curr Objects"..?..some of them are of the type "number" whereas others are CHARS.
Everytime when i add some field i cannot re-create the whole transformation. There has to be some inconsistency as my mapping of source-target field is correct. I have also raised this to OSS but as usual they are taking thier own sweet time to reply.
Surprisingly the transformation got activated yesterday and the dataload too was successful. Today again the same ols problem of "parameter is not being used"..!!
still could you pls throw some light on Unit/Currency objects that u mentioned..??
Thanks in adv.
Sucheta

[Solved] Xorg log says Option "AccelMethod" is not being used

I am using Arch for about 3 weeks now. I initially got some problems for setting up my xorg.conf with correct resolution but i solved it.
Today i looked my Xorg.0.log and find that Option "AccelMethod" is not being used.
So please help me in setting up my xorg.conf correctly.
Xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "DontZap" "false"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "dri2"
Load "record"
Load "glx"
Load "dri"
Load "dbe"
Load "ddc"
Load "i2c"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Samsung"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 80.0
VertRefresh 60.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
#Option "RenderAccel" "true"
Option "AccelMethod" "UXA"
#Option "ExaNoComposite" "false"
Option "DRI" "true"
Identifier "Card0"
DRIVER "intel"
VendorName "Intel Corporation"
BoardName "82946GZ/GL Integrated Graphics Controller"
BusID "PCI:0:2:0"
#Option "PanelSize" "1024x768"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
My Xorg.0.log is
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux puvana 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009 x86_64
Build Date: 18 July 2009 03:49:37PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 1 12:36:07 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(==) No device specified for screen "Screen0".
Using the first device section listed.
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "DontZap" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0xb40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2972:8086:5354 Intel Corporation 82946GZ/GL Integrated Graphics Controller rev 2, Mem @ 0x50100000/1048576, 0x40000000/268435456, I/O @ 0x000020e0/8
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 2.7.99
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
IGDNG_M
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "DRI" "true"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 946GZ
(--) intel(0): Chipset: "946GZ"
(--) intel(0): Linear framebuffer at 0x40000000
(--) intel(0): IO registers at addr 0x50100000 size 1048576
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): No SDVO device is found in VBT
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "SAM", prod id 279
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "SAM", prod id 279
(II) intel(0): Output VGA connected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output VGA using initial mode 1024x768
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 7676 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (310, 230) mm
(**) intel(0): DPI set to (83, 84)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000000 to 0x00000020
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x00000307
(WW) intel(0): PIPEASTAT before: status:
(WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS DLINE_COMPARE_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(II) Loading sub module "dri2"
(II) LoadModule: "dri2"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri2.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 238848 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 955388 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x0077f000: end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000: start of memory manager
(II) intel(0): 0x0079f000-0x00a9efff: front buffer (3072 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000: end of memory manager
(WW) intel(0): ESR is 0x00000001
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(**) Option "dpms"
(**) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(WW) intel(0): Option "AccelMethod" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 312 x 234
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device ImExPS/2 Logitech Explorer Mouse
(**) ImExPS/2 Logitech Explorer Mouse: always reports core events
(**) ImExPS/2 Logitech Explorer Mouse: Device: "/dev/input/event14"
(II) ImExPS/2 Logitech Explorer Mouse: Found 5 mouse buttons
(II) ImExPS/2 Logitech Explorer Mouse: Found x and y relative axes
(II) ImExPS/2 Logitech Explorer Mouse: Found scroll wheel(s)
(II) ImExPS/2 Logitech Explorer Mouse: Configuring as mouse
(**) ImExPS/2 Logitech Explorer Mouse: YAxisMapping: buttons 4 and 5
(**) ImExPS/2 Logitech Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImExPS/2 Logitech Explorer Mouse" (type: MOUSE)
(**) ImExPS/2 Logitech Explorer Mouse: (accel) keeping acceleration scheme 1
(**) ImExPS/2 Logitech Explorer Mouse: (accel) filter chain progression: 2.00
(**) ImExPS/2 Logitech Explorer Mouse: (accel) filter stage 0: 20.00 ms
(**) ImExPS/2 Logitech Explorer Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
lved
Last edited by bharani (2009-08-02 11:49:37)

The latest intel drivers only support UXA, so any AccelMethod option is ignored, as you can't set anything else than UXA.

Bought a Mac Mini. at 18 day's old it started to lock up and not function. Took it in and they wiped and reinstalled it. Well at 24 day's old it's been sitting in the box not being used. First and last Mac for me. But can I get something for the junk?

I have pulled it out of the box and put 2 Mac approved mem sticks in it to boost it to 8 Gigs mem and it still locks up and freazes.. So many people told me Mac was the way to go... 1500 dollers could have bought me a great pc laptop. Now I have a wirless mouse keyboard and a mac mini (aka Brick) that allowed me to donate money to a cause that is helping buildings and companies out side of the US. While I have junk.. It's still under warranty and I reinstalled the os after the new mem sticks. Again.. locks up and does nothing. What can I do with this? Toss it in the trash? Any info on what I might do with it.. Please help!

It would be most helpful if you updated your system information:
Please reconcile the following
at 18 day's old it started to lock up and not function. Took it in and they wiped and reinstalled it. Well at 24 day's old it's been sitting in the box not being used.
... I reinstalled the os after the new mem sticks.
If your Mini is anything less than six months old it would be running Lion, not 10.6.1, nor would it have been necessary to "reinstall the OS". Any help that anyone can provide is predicated on your system configuration so it's important.
If you are running Lion then boot your Mini while holding the D key. This will load Apple Hardware Test which will enable you to test your memory. "Mac approved" memory is sort of vague, and even memory that is allegedly designed to meet your Mini's specification may fail. There few reputable memory vendors.
"Apple installed" memory is more meaningful, and indicates Apple has tested it and guarantees its function. Otherwise all bets are off with a claim of "Mac approved". You will have to verify that yourself with Apple Hardware Test.
If your Mini was running, or ever ran OS 10.6.1 for that matter, it is close to three years old.
You must clear up these uncertainties before anyone can help.

Index not being used in access path

Hi,
I have been trying to rewrite a query which currently is taking almost 1min and 25 secs to execute. The database version is 11.1.0.7.
The query is -
SELECT COUNT(1)
FROM TAB1 p
WHERE p.ACODE = 24377
AND NOT EXISTS (SELECT 1 FROM TAB2 ph where ph.PKey = p.AKey )
AND NOT EXISTS (SELECT 1 FROM TAB3 phs where phs.PKey = p.AKey )
AND p.rflag = 'Y';
The table originally didn't have an index on p.ACODE. So, I created this index and set it to visible and set the optimizer_use_invisible_indexes parameter also to TRUE. I set the monitoring on this index too. Even though I have created the index on the ACODE column, the access path doesn't use it. Can someone please tell me why this is not being used.
Below is the explain plan for the sql stmt and the usage of the index -
I have changed the actual table and column names -
SQL> SELECT COUNT(1)
2 FROM TAB1 p
3 WHERE p.ACODE = 24377
4 AND NOT EXISTS (SELECT 1 FROM TAB2 ph where ph.PKey = p.AKey )
5 AND NOT EXISTS (SELECT 1 FROM TAB3 phs where phs.PKey = p.AKey )
6 AND p.rflag = 'Y';
COUNT(1)
1
SQL> explain plan for
2 SELECT COUNT(1)
3 FROM TAB1 p
4 WHERE p.ACODE = 24377
5 AND NOT EXISTS (SELECT 1 FROM TAB2 ph where ph.PKey = p.AKey )
6 AND NOT EXISTS (SELECT 1 FROM TAB3 phs where phs.PKey = p.AKey )
7 AND p.rflag = 'Y';
Explained.
Elapsed: 00:00:00.02
SQL> @$ORACLE_HOME/rdbms/admin/utlxpls.sql
PLAN_TABLE_OUTPUT
Plan hash value: 3942424611
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 87 | 214K (2)| 00:42:57 |
| 1 | SORT AGGREGATE | | 1 | 87 | | |
|* 2 | HASH JOIN ANTI | | 1 | 87 | 214K (2)| 00:42:57 |
|* 3 | HASH JOIN ANTI | | 1 | 60 | 209K (2)| 00:41:56 |
|* 4 | TABLE ACCESS FULL | TAB1 | 1 | 32 | 209K (2)| 00:41:55 |
| 5 | INDEX FAST FULL SCAN| PK_TAB3 | 29918 | 818K| 53 (0)| 00:00:01 |
| 6 | INDEX FAST FULL SCAN | PK_TAB2 | 3199K| 82M| 5059 (1)| 00:01:01 |
Predicate Information (identified by operation id):
2 - access("PH"."PKey"="P"."AKey")
3 - access("PHS"."PKey"="P"."AKey")
4 - filter(TO_NUMBER("P"."ACODE")=24377 AND "P"."rflag"='Y')
20 rows selected.
Elapsed: 00:00:00.03
SQL> select index_name,VISIBILITY from user_indexes where index_name='IDX_TAB1_ACODE';
INDEX_NAME VISIBILIT
IDX_TAB1_ACODE VISIBLE
Elapsed: 00:00:00.01
SQL> show parameter visible
NAME TYPE VALUE
optimizer_use_invisible_indexes boolean TRUE
SQL>
SQL> SELECT v.index_name, v.table_name,
v.monitoring, v.used,
start_monitoring, end_monitoring
FROM v$object_usage v, dba_indexes u
WHERE v.index_name = u.index_name
AND v.index_name = 'IDX_TAB1_ACODE';
INDEX_NAME TABLE_NAME MON USE START_MONITORING END_MONITORING
IDX_TAB1_ACODE TAB1 YES NO 05/26/2010 14:13:41
Elapsed: 00:00:00.10
Edited by: user12158503 on May 26, 2010 1:24 PM

Thanks Centinul.
I apologize for posting in both sections. I put it in the Database General too because I thought I originally posted it in the wrong section.
The index was not being used because it was doing the implicit type conversion. When I enclosed it in quotes, it returns the result within a second and it uses the index.(whereas without the index it takes around 1min 25 sec)
Here is the explain plan and execution time after enclosing it in quotes -
SQL> explain plan for
2 SELECT COUNT(1)
3 FROM TAB1 p
4 WHERE p.AKey = '24377'
5 AND NOT EXISTS (SELECT 1 FROM TAB2 ph where ph.PKey = p.AgilityKey )
6 AND NOT EXISTS (SELECT 1 FROM TAB3 phs where phs.PKey = p.AgilityKey )
7 AND p.rflag = 'Y';
Explained.
Elapsed: 00:00:00.02
SQL> @$ORACLE_HOME/rdbms/admin/utlxpls.sql
PLAN_TABLE_OUTPUT
Plan hash value: 2008452282
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 87 | 5134 (1)| 00:01:02 |
| 1 | SORT AGGREGATE | | 1 | 87 | | |
|* 2 | HASH JOIN ANTI | | 1 | 87 | 5134 (1)| 00:01:02 |
|* 3 | HASH JOIN ANTI | | 1 | 60 | 60 (2)| 00:00:01 |
|* 4 | TABLE ACCESS BY INDEX ROWID| TAB1 | 1 | 32 | 6 (0)| 00:00:01 |
|* 5 | INDEX RANGE SCAN | IDX_TAB1_AKey | 4 | | 1 (0)| 00:00:01 |
| 6 | INDEX FAST FULL SCAN | PK_TAB3 | 29918 | 818K| 53 (0)| 00:00:01 |
| 7 | INDEX FAST FULL SCAN | PK_TAB2 | 3199K| 82M| 5059 (1)| 00:01:01 |
Predicate Information (identified by operation id):
2 - access("PH"."PKey"="P"."AGILITYKEY")
3 - access("PHS"."PKey"="P"."AGILITYKEY")
4 - filter("P"."rflag"='Y')
5 - access("P"."AKey"='24377')
22 rows selected.
Elapsed: 00:00:00.02
SQL> SELECT COUNT(1)
2 FROM TAB1 p
3 WHERE p.AKey = '24377'
4 AND NOT EXISTS (SELECT 1 FROM TAB2 ph where ph.PKey = p.AgilityKey )
5 AND NOT EXISTS (SELECT 1 FROM TAB3 phs where phs.PKey = p.AgilityKey )
6 AND p.rflag = 'Y';
COUNT(1)
1
Elapsed: 00:00:00.52
Can you give me some tips on where I could read about learning to understand the explain plan. I did read a few articles which did help me, but not much. I am looking for something in detail.

Geo Location Custom Form is not Being Used

Similar Messages

Maybe you are looking for