Geo location poker

hi
verizon gave me a good deal so i switched from optimum. trouble is i use geo location software on my pc to play poker online. never had a problem but i do now after switching to verizon. the original modem/router would not let me create a guest account, (the poker sites need 2 wifi signals to detect i am in nj). so i ordered the quantum modem/router ($4 more a month) and created my guest account, no joy. called verizon they said it has nothing to do with them. asked them to change my ip address no good. changed firewall setting in router no good. the poker sites said a lot of verizon customers have issues with geo location when they didnt before with other cable companies. i was mad cause i had to pay $4 more for the option to have 2 wifi signals. i am furious that i can not fix this, verizon claims its not them, how are 4 poker sites saying its a verizon problem but verizon says its not??? nothing changed on my pc accept for the router/modem. i'm sure i'm not the only one with this problem, and wish someone who had it fixed could guide me. right now the verizon deal is not lookin too good. i am losing money (by not being able to play poker online). 7 days left if this does not get fixed back to optimum for me.

A WAN (wide area network) IP address is the public, routable IP address. FiOS users get one WAN IP address. The router shares that IP address with the LAN (local area network) devices by using a private, none routable address space. Private LAN IP addresses are never used outside of the LAN. As TelcoGuru pointed out, 192.168.x.x address are private addresses. No systems outside of the LAN know or care about these addresses. Changing them will have no effect on anything outside the LAN.
With the FiOS quantum router, everything uses the single WAN IP address. The router hands out private IP addresses to devices on the Ethernet, WiFi and Guest WiFi, but those are not visible outside of your home.
It's possible that Optimum assigned two WAN IP addresses to their customer's routers, one for the private LAN space and one for Guest WiFi. Was your Guest WiFi something that you managed and controlled or was it was available to any Optimum user as a "hot spot" without your control? If it was the later, chances are very good that it was using a completely separate WAN IP address. If that's the case, that's probably why you could use it as a 2nd network for geo location.
The crux of the problem is the poker systems folks probably don't give out too much info about how geo location works in order to prevent people from trying to circumvent it. My guess is they want to see two completely different WiFi networks and public WAN IP addresses. You won't get that with a Verizon router and guest network.
This is really an issue with how the poker system is setup and is not a Verizon issue. If you can find out what the poker system wants to see, that would help.
Good Luck.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Similar Messages

Re; Getting data from a live web site, based on geo-location.

re; Getting data from a live web site, based on geo-location.
Approx 4 minutes 25 seconds into this YouTube Adobe ELearning video for Common JavaScript Interface in Adobe Captivate 8, the topic of extracting data from a live web site http://api.openweathermap.org
Is there anywhere we can download this Adobe Captivate weather ticker project? or get some more complete tutorial on setting it up? I tried to copy some of the code shown in the video, but can't get it to work, so I suspect I'm missing something somewhere.
I would like to try it out.
Video Here: https://www.youtube.com/watch?v=u1ZfG47k24k

Could windows Firewall be stopping this geo-location weather ticker app from working? When I start Captivate 8, I get the message indicating the the firewall is blocking some features of the program. When I check the geo var it seems empty.
Name: AdobeCaptivateWS
It then refers to some temp folder such as
Path: C:\users\{username}\appdata\local\temp\cp3320604394session\cptrustfolder3320604659\adobec aptivatews
Network Location: Public, private, domain networks
etc...

Geo Location Custom Form is not Being Used

Hi Experts,
I extended the Geo Location class and added a few fields that I needed. Also in the same XML/MP I added a custom form for it using Authoring Tool. Imported the management pack and didn't get any error. But when I open any locations still it uses the default
form rather than the custom one I created. Is there any dll or any other file that I should inject into SCSM folder? Is there any where I can troubleshoot why my custom form is not loading.
My SCSM is 2012 R2 with UR5 and Authoring Tool is on version 2012 R2 (7.5.3079.0).
Thank you
Soroush

Hi,
How ahout adding the custom filed to extend the existing form?
You can refer to the link below as an example:
Adding a custom field to Incident Forms
If you are creating a new form template, you may refer to below link:
http://blogs.litware.se/?p=1402
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

More granular geo-location from the MSE?

I have a WCS 7.0.xx and a MSE 7.0.xx installed and working fine.
I have managed to get an geo-location answer from the MSE, but it appears like it has low accuracy. Eg: 63:24:59N 10:24:9E. As far as I can see, It contains only degrees, minutes and seconds, not decimal seconds. If I remember correctly a second equals to about 30 meters in north/south direction (and from about the same to 0 in east/west depending on where it is placed between equator and the north/south pole).
Is it possible to increase the number of decimals, so it does not lose more accuracy than it needs?

enduser wrote:
Hmm.. `gpspipe` gives me:
gpspipe: could not connect to gpsd localhost:2947, Unknown error -6(-6)
And `gpsd` gives me:
gpsd:ERROR: can't run with neither control socket nor devices
Do I need to be root for these applications? Alternatively, could I maybe just grab the timezone from /etc/localtime and use that? (though I guess that doesn't get close enough on longitude...)
You have to start gpsd from systemctl. And you can plug/unplug gps devices at will, so it can be enabled in systemctl whether or not an actual gps is always available.

Setting Geo-location in Bridge CS6

Is there a plug-in for Bridge CS6 that allows you to set the geo-location of an image or set of image using a map. Google Maps for example?

You might also have a look at this blog entry giving some ideas to allow this sort of feature:
http://blogs.adobe.com/cssdk/2010/05/geolocation_inside_the_creative_suite.html

Where is the GEO location info?

I cannot seem to find where the geo location info is located on a pic. It is not showing up under picture information in iPhoto, or on the iPhone. Any help?
Thanks

Yes, it's in the photo info. On a Mac, you can see it by selecting the photo, then hitting command-I (or right clicking and selecting "Show Photo Info." There are two fields near the bottom for "GPS Latitude" and "GPS Longitude."
Note that this also works on the first gen iPhone -- when I launched the camera, it asked whether Camera could use my current location info, then it tagged the photo I took.
However, I don't know yet how to use this data -- as a previous poster said, Flickr doesn't seem to know where that picture came from. When I view the photo in Flickr, the EXIF info still contains fields named "Latitude" and "Longitude" with the same data as shown in iPhoto, but Flickr can't put the photo in the right place on the map.

Geo locations in SUP

Hi,
Is it possible to use geo locations in a SUP container application? I read something in an article that it was possible in SUP 2.0. I have experience with geolocations in Xcode. But need to know if it works in SUP for my internship.
here is the article:
HYBRID WEB CONTAINER APPLICATIONS
SUP Hybrid Web Container bridges the deficiencies of todayu2019s Mobile Web Browsers with the power of device OS
services such as GeoLocation and others. Developers can build rich applications using Web technologies and add
functionality similar to what is available in todayu2019s native applications. In SUP 2.0, the Hybrid Web Container is a
complete rewrite of the client-side container technology available in previous versions that was based on proprietary
client-side application definition (XML) used to render the application interface within the container.
grtz

This can work only on iOS and BB6 where the browser on these platforms provides html5 javascript api to retrieve geocode information
navigator.geolocation.getCurrentPosition
Look at the sample code in this [link|http://stackoverflow.com/questions/6797569/html5-geolocation-easiest-way-to-get-city-name].
Edited by: Himagiri Mukkamala on Oct 12, 2011 5:06 AM

List Geo Location approved sites

So I have read up on Geo Location in FF a little bit and found that you can toggle whether a site can or cannot see your Geo location data by visiting the page and going to Page Info, then Permissions.
The problem is I hit Always Allow on some random Google related page and I cannot for the life of me figure out what page it was where I clicked Allow.
Is there a way to somehow get a list of all pages where I have specified either Allow or Block?
As opposed to the default setting which is "Always Ask"

Try ExExceptions: https://addons.mozilla.org/firefox/addon/7385

Setting up NLB cluster to resolve nodes from GEO location.

Hi,
Is it possible that I can configure NLB cluster to load balance my application servers located in different GEO location?
I do have site to site between these locations but nodes will have static IP address in different subnet?
can this limitation be taken care of using NLB on Win 2012R2 or using a hardware load balancer?
So I want to understand clearly about limitation for nodes to be in same subnet is for servers part of NLB cluster or is it for application hosts that NLB is serving to.
BR,

Hi,
Is it possible to use NLB through a router in two different datacenter?
Yes, we can use NLB through a router. However, please do not plug the nods of NLB to a router or a layer 3 switch directly. Besides, deploy NLB with single case mode may avoid
potential connectivity problems.
A single NLB cluster is not typically deployed across multiple sites (for a number of reasons the technology is best suited to a broadcast-capable LAN environment). Instead,
multiple, independent NLB clusters are typically deployed, one at each site. The sites are then “federated” into a single service to clients using features such as DNS round-robin to “load balance” client requests across the different sites. Internally, NLB
can be used to load balance requests sent to a given site amongst the nodes in that site.
The similar thread:
NLB Question
http://social.technet.microsoft.com/Forums/windowsserver/en-US/a402ed55-2f13-4523-848c-fc1d685029a5/nlb-question
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

ITunes U raw reports - storefronts do not match real geo location

Hello,
in iTunes U raw reports the storefronts do not match real geo location.
I've made some tests choosing different country stores in iTunes client instead of the real one where I'm geographically located.
Then I preview and download some episodes taking note of my IP (WAN), date and time, actions, client used, episode titles ; then looking in the raw report for that IP address( I suppose the last two fields are X.X for a privacy reason) , time, actions, client used and episode titles, as expected I've found the storefront I've selected instead of my real geo location.
This is a correct behavior of the new reporting system, but the problem is that I found in my reports unexpected activities for some countries probably because users choose a different or incorrect iTunes contry store and that could make the reports unreliable if looking for the countries that follow our iTunes U site.
It would be nice to have the real geographical location; we are an international scientific and no profit organization, and our mission is to transfer knowledge, and for that reason we would understand which countries follow us.
Regards,
Diego

You are welcome. I'm glad you got it back up.
(1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
(2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
(3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
(4) Add some SARE rules:
Visit http://www.rulesemporium.com/rules.htm and download the following rules:
70sareadult.cf
70saregenlsubj0.cf
70sareheader0.cf
70sarehtml0.cf
70sareobfu0.cf
70sareoem.cf
70sarespoof.cf
70sarestocks.cf
70sareunsub.cf
72sare_redirectpost
Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
backhair.cf
bogus-virus-warnings.cf
chickenpox.cf
weeds.cf
Copy these rules to /etc/mail/spamassassin/
Then stop and restart mail services.
There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

Geo-location, ID and Type of an VM

Hello,
I have a question for my studies:
How can I find out the unique ID and the image type of a VM instance in Azure?
Where and how can I determine the geo-location of a VM instance in Azure?
Thanks,
Dunja

Hi,
The following table shows the primary and secondary location pairings for Ge0-locations:
I am not sure which ID are you referring to. if you want the IP for your VM it is located in the dashboard on the left pane.
Primary
Secondary
North Central US
South Central US
South Central US
North Central US
East US
West US
West US
East US
North Europe
West Europe
West Europe
North Europe
South East Asia
East Asia
East Asia
South East Asia
Hope this helps you.
Girish Prajwal

How can I turn off geo-locator? I have done the fix that I found but it doesn't work - what else can I do?

I have done this and turned it to false (hope that's right)
• In the URL bar, type about:config
• Type geo.enabled
• Double click on the geo.enabled preference
• Location-Aware Browsing is now disabled
But google is still putting me at a location unsuitable for my browsing requirements. I want to browse .co.uk not .fr. for business as well as personal. Please help it is very time consuming even when I type .co.uk google changes it back to .fr
Any help gratefully received. Thank you.

"Location-Aware Browsing" is only useful if you connect via a wireless access point.<br />
Otherwise a reverse DNS look up of your IP is used and that is usually not very accurate.<br />
Firefox will always ask for permission before using Geolocation.<br />
* http://www.mozilla.com/firefox/geolocation/
* http://en.wikipedia.org/wiki/Geotagging

Geo location / photo uploading

I know they listed the api's that you can use but they are not very clear. If you can save a image to the iphone shouldn't you be able to grab a image for the iphone.
My app I want to be able to upload a photo with the location information to a server / mysql database. Anybody think this will be possible? Or should I just go and learn how to build native apps. Also will other api's like facebook able for use?
Thanks Trav

The list of supported APIs is located in the developer FAQ: http://labs.adobe.com/wiki/index.php/Applications_for_iPhone#Which_native_iPhone_APIs_and_ functionality_are_supported_when_using_Flash_tooling.3F
As for the OP's specific questions: no, you can't get images out of the camera roll. And yes your idea of uploading images with geotagging sounds like a good fit for flash.

Sugg on how to define load time -specific time instance across GEO location

Hi Good Morning,
How to define the loading instance of time with respect to different Geographic Loacations. If we consider daily load how would time difference play a role here, bcos all business in different regions will not close if we consider to load based on one regions time. so can any body help me out how to define that time of loading and basing all Geographic regions into consideration or what is the best way to take it up.
Thanksin Advance
- Venkat

Hi Venkat,
What are the Geo's that you are considering?
Things to keep in mind while deciding the load times & the no. of times your Process Chains have to run:
1. Find out which are the most important/ critical process chains which the Business requires.
2. Find out their respective load times (how long does it take to finish executing completely)
3. APAC Region is always the first to start working. So, better would be that you schedule your chains by say 20GMT or a little earlier for this region.
4. EMEA region is the next. For this you can have your chains scheduled for 3 or 4 GMT.
5. US region - schedule the chains for 10 GMT or so.
6. Have different variants scheduled at different times & include your process chains in hose variants.
These are just general views. It will vary from case to case.
Hope this helps.
Regards
Vishal

Display Geo-Location in Bridge

I GeoTag all my pictures and can display the location (Lat/Long, Altitude) in the Metadata. Is there a script or other add-on that can be used to display the physical map location, or Google Earth location, in a separate window when a particular photo is selected?
Thanks,
Paul

You might also have a look at this blog entry giving some ideas to allow this sort of feature:
http://blogs.adobe.com/cssdk/2010/05/geolocation_inside_the_creative_suite.html

Geo location poker

Similar Messages

Maybe you are looking for