Gerber export problem with copper area's

Hi,
Just had a strange thing on a new design...
I'm using version 10.01 Ultiboard...
I have placed ground tracks and included them into a copper area, connected to the correct net...
So far no problem, but from time tot time the copper area diisapears on my screen.
When doing a DRC check, things get back to normal, all tracks are back into the copper area.
But on this design, when I received the PCB's, the tracks were not connected to the copper area...
probablt because I didn't do a last DRC check before exporting...
So if anyone had this problem, just do a DRC check and it probably gets fine....
By the way, I contacted my PCB producer (Eurocircuits) and they told me that Ultiboard had pretty bad export-data,
Apparently gerbers made by Ultiboard are not very 'production-friendly' , they especially mentioned that Ultiboard had 'weird polygons and copper areas'
I hope the NI designers read this and can try to improve the gerber export....
And I hope that in time there will be a real manual for the program, one that explains all possible option thoroughly...
Best regards from the rainy country

I've seen this export behavior, my fix was in the export > gerber properties : under options. I made sure I had all the option off except "allow Non-convex polygons" only check. I saw what you described if I had "merge polygons (slow)" checked.....so make sure it is UNCHECKED. That solved the problem for me
Message Edited by kittmaster on 08-29-2008 10:03 AM
Signature: Looking for a footprint, component, model? Might be here > http://ni.kittmaster.com

Similar Messages

PDF export - problems with displaying tables

Hi,
I have nice and neat rtf template with some text and big table. It looks fine, but when I export it to PDF it starts the table from new page, not just below the text, which results in 75% blank page. How can I fix it?

We are using the PDF Export 8.3.7 version, and are having a similar problem. We have a Word file (.doc) with an embedded graphic. Inside the graphic is a table (the original graphic was created some where else and had text and a table, then an image was made of that which was then embedded as a graphic in the Word document). The problem is that the table does not render corretly - the last row of data is not displayed. Oddly, if in the resulting PDF/A output you highlight the region where the data should be displayed, and copy that to Word/Notepad, the data is there, the issue seems to be in rendering the data to make it visible in the rendered PDF/A output. We see other problems with tables in other files, for example some tables are rotated ninety degrees.
Will there be a fix to PDFExport anytime soon?
Thanks,
Kevin

Export problems with pages/ save as word document results in corrupted text

This may be a new problem with Pages as I have not seen this happen with previous versions but, when I export a page made with a template, it ends up with merge problems - headers end up at the foot and invisible text regarding merge showing. When saved, a error box opens saying that merge fields are not save or similar, and I end up with a non friendly .doc file.

morayshire wrote:
This may be a new problem with Pages as I have not seen this happen with previous versions but, when I export a page made with a template, it ends up with merge problems - headers end up at the foot and invisible text regarding merge showing. When saved, a error box opens saying that merge fields are not save or similar, and I end up with a non friendly .doc file.
Here are alert messages related to 'Word Exporter'
/* Word Exporter */
"Cells with unsupported number formatting were exported as text." = "Les cellules comportant un format numérique non pris en charge ont été exportées sous forme de texte.";
/* Word Exporter */
"Change tracking isn\\U2019t supported for cell image fills. Original cell image fills were removed." = "Le suivi des modifications n’est pas pris en charge dans les remplissages de cellule par image. Les remplissages de cellule par image d’origine ont été supprimés.";
/* Word Exporter */
"Change tracking isn\\U2019t supported for cell image fills. Tracked changes for cell image fills were accepted." = "Le suivi des modifications n’est pas pris en charge pour les remplissages de cellules par image. Les modifications effectuées pour ces remplissages ont été acceptées.";
/* Word Exporter */
"Change tracking on floating objects isn\\U2019t supported. Tracked changes were accepted." = "Le suivi des modifications sur les objets flottants n’est pas pris en charge. Les modifications ont été acceptées.";
/* Word Exporter */
"Comments on anything other than body text and inline objects aren\\U2019t supported and were removed." = "Les commentaires sur un autre élément que le corps de texte et les objets incorporés ne sont pas pris en charge et ont été supprimés.";
/* Word Exporter */
"Durations formatting isn\\U2019t supported and was exported as text." = "Le formatage des durées n’est pas pris en charge et a été exporté sous forme de texte.";
/* Word Exporter */
"Footer rows aren\\U2019t supported and were converted to regular rows." = "Les rangs de bas de tableau ne sont pas pris en charge et ont été convertis en rangs standard.";
/* Word Exporter */
"Formulas referencing cells with custom number formats aren\\U2019t supported and were replaced by the last calculated value." = "Les formules faisant référence à des cellules comportant des formats numériques personnalisés ne sont pas prises en charge et ont été remplacées par la dernière valeur calculée.";
/* Word Exporter */
"Formulas referencing durations aren\\U2019t supported and were replaced by the last calculated value." = "Les formules faisant référence à des durées ne sont pas prises en charge et ont été remplacées par la dernière valeur calculée.";
/* Word Exporter */
"Hidden footer content was removed." = "Le contenu du pied de page masqué a été supprimé.";
/* Word Exporter */
"Hidden header content was removed." = "Le contenu de l’en-tête masqué a été supprimé.";
/* Word Exporter */
"Hidden rows and columns were removed." = "Les colonnes ou rangs masqués ont été supprimés.";
/* Word Exporter */
"Japanese footnote or endnote numbering isn\\U2019t an exact match." = "La numérotation japonaise de note de bas de page ou de fin ne concorde pas exactement.";
/* Word Exporter */
"Links to external Pages documents aren\\U2019t supported and were removed." = "Les liens vers les documents Pages externes ne sont pas pris en charge et ont été supprimés.";
_/* Word Exorter */_
_"Merge fields were exported as regular text, not as merge fields." = "Les champs de fusion ont été exportés comme texte standard et non comme champs de fusion.";_
/* Word Exporter */
"One or more formulas aren\\U2019t supported in the chosen file format and were removed. The last calculated value was retained." = "Une ou plusieurs formules ne sont pas prises en charge dans le format de fichier sélectionné et ont été supprimées. La dernière valeur calculée a été retenue.";
/* Word Exporter */
"Some paragraph border rules couldn\\U2019t be exported." = "Certaines règles de bordures de paragraphe n’ont pas pu être exportées.";
/* Word Exporter */
"Table cell comments can\\U2019t be exported if there are any comments attached to the entire table. The table comments were exported, but cell comments were removed." = "Les commentaires de cellules de tableau ne peuvent pas être exportés si des commentaires sont associés au tableau entier. Les commentaires de tableaux ont été exportés mais ceux de cellules ont été supprimés.";
/* Word Exporter */
"Table cell fills other than solid colors aren\\U2019t supported and were removed." = "Les remplissages de cellules de tableau autres que par des couleurs unies ne sont pas pris en charge et ont été supprimés.";
/* Word Exporter */
"Table image fills aren\\U2019t supported and were removed." = "Les remplissages de tableau par image ne sont pas pris en charge et ont été supprimés.";
/* Word Exporter */
"Tables with more than 63 columns aren\\U2019t supported. Columns 64 and highger were removed." = "Les tableaux comportant plus de 63 colonnes ne sont pas pris en charge. Les colonnes 64 et au-delà ont été supprimées.";
/* Word Exporter */
"The page layout document was exported as a word processing document." = "Le document de mise en page a été exporté comme document de traitement de texte.";
*_This gives us a simple way to convert a Page Layout document into a Word Processor one. Export it to Word, import the .doc file._*
/* Word Exporter */
"WECannotMapNumberFormat" = "Le format numérique non pris en charge a été remplacé par le format numérique par défaut (1, 2, 3…).";
Yvan KOENIG (Vallauris, FRANCE vendredi 7 août 2009 21:18:06)

Export problems with pictures (Vista 64 Bit)

Hi,
I´ve a problem with publishing my CBT from captivate 4 to an executable file (.exe). The CBT contains slides with time-delayed text captions and images.
In the preview mode eveything looks perfect and works well, but when using the "publish" button and exporting it as ".exe" or ".swf" the resulting file always shows the same problem: the included images in the CBT do not appear as the are supposed to do, that means, that no image is faded in (also the static images are working perfect and also the audio track is okay. Has anyone an idea how to fix that problem?
Thanks for your help!
System information:
Adobe Captivate 4 (trial version)
Windows Vista (64 Bit)
latest Flash Player (10)

Hi there
Have you double checked to ensure you don't have a Button, Click Box or Text Entry Box object on the slides where you see the issue?
Each of those object types will cause the project to pause playback. If you have an Image that is timed to appear at perhaps three seconds and an object is pausing the slide at two seconds, the Image doesn't have a chance to display.
Can you insert a screen capture of one of the slides in question so that we may see the Timeline? If you choose to do that, please insert using the Camera icon and do not use the attach function.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Problems with CC are REALLY getting old.

I spend a great deal of my day trying to get Adobe CC to work like it should. Right now I have a spinning beach ball on the Desktop app and the AAM never seems to work. It just sits there in the DOCK bouncing it's little self to death...
I CONSTANTLY have to change the OOBE file so I can RE-DOWNLOAD and RE-INSTALL. After I do that, about a day later I have to do it all over again. I can't tell you how many times I've run permissions repair and various other time consuming things trying to get this stuff to work. And by the way, were are a three bay editorial shop and all three bays have problems with ADOBE CC programs.
Come on guys. I use this software professionally and have NEVER had so many problems with a program. Yesterday AE, PP and Photoshop ALL said they were needing to be reinstalled! I spend at least half a day just trying to get this CC stuff to work.
Seriously it is flawed and not ready to be released to the professional community. We need these programs to work - day in, day out. We don't need to be contantly "Upgrading" "Re-installing" Re-downloading" and changing numerous files to "OLD" to get your stuff to work.
And the on-line staff in India is really a joke. I've not had them EVER solve a problem! The only solutions are from other users that have found work arounds. (Still have the spinning beach ball on the CC Desktop app....) How many other programs require you to constantly open Activity Monitor and KILL them there because they won't even Force Quit? I suspect ONLY ADOBE CC programs.
Please: GET IT FIXED!
(yeah, that spinng beach ball is still there..)

I got it fixed by a round about way. Another user wrote a script that allows you to kill all the running programs and clean up so you can do the new install. You can do a google search for: Adobe CC Updater Fix 2.workflow

RENDER /EXPORT problems with the new CC 2014

I have updated to the new Premiere pro CC 2014 version. I realise its a standalone upgrade so i deleted the previous cc version from my pc to save disk space...
I have a 3 hour file just raw footage, with no plugins on it....
I have tried rendering to media encoder so many times, it starts the render but stops at random sections, the elapsed times still keep counting up, the remaining time counts up but the yellow bar stays at the same point and does not move...
I have tried exporting directly from Premiere Pro and once again it got to 43% and paused at this ... I have then have to press cancel get the loading mouse pointer circle and i have to close the programs through start manager...
For two days iam trying to export this file to give to a client and it wont do it and there is no solutions on the net...
I have had nothing but problems with every upgrade, on my other PC i still get audio dropouts from files and have to restart the computer.... Paying $50 a month to pull my hair out is a great investment...
please help as Adobe software is on thin ice with me...
Cheers

If CC worked, I think this will allow you to go back
http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html
-or http://www.adobe.com/downloads/other-downloads.html

Problem with Stacked area chart

Hi all,
I'm working on delivery data according to month having input(combo) as the year. I'm trying to display the data in percentages in Stacked area chart having series as ontime delivery, 1 week late, 2 weeks late,........5 weeks late and category labels as months. The problem is when I take the Preview of data I get to see the data for ontime, 1 week , 2 week as it should be but when I hover the mouse over the 2 weeks data area mouse over values shows 5 weeks data(0 %) where as in reality the colored area belongs to 2 weeks data. I tried to delete 5 weeks series data and now it shows as 4 weeks data.
What could be the problem ?
Thanks

>
Raghavendra Gadhamsetty wrote:
> Did you try adding the formula year(datefield) in X axis by removing the existing datefield?
>
> Regards,
> Raghavendra
Thanks for the answer regarding dates. I'm still awaiting an answer on the following part of my question:
"My problem is that I am trying to configure a stacked area chart to show various related financial figures over the period of a year or more. My problem with a regular stacked area chart is that because of the large number of data points (daily) the X axis becomes far too chaotic with the large number of labels. The obvious option seems to be to use the "Show time scale" option in axis settings, however when you chose this option the "Date axis area" chart type is automatically chosen and this chart type doesn't seem to allow stacking. Can anybody help?"
Thanks in advance for your help.
Kind Regards,
Mark

Problem with depreciation area (Incorrect currency exchange rate is used)

Good day to all SDN forumers!
I'm having a problem with one depreciation area that we set up. The reason why we configured this depreciation area is for us to enable to monitor all asset postings in another (group) currency aside from the local currency. We set it up in such a way that the depreciation would not post and would thus only "convert" the asset postings to group currency using the table rates in table TCURR (via OB08).
The problem is despite having defined an exchange rate for the current period, the system still picks up the exchange rate for 01/01/2001 which is incorrect. This affected all reports which displays incorrect values whenever I view the postings using the 2nd depreciation area we set up. Is there a way we can correct this?
I'd really appreciate your comments and suggestions guys. Thanks a lot and more power!

Update:
I created a new depreciation area by copying an existing area and updated some of the configuration. The problem is still there though, since the depreciation area still reflects the incorrect rate (similar to that of the previous depreciation area) whenever I access it using Asset Explorer. What's surprising is that even though I've already set the exchange rate (e.g. USD to EUR) to match that of the asset's capitalization / acquisition date, the posted values still do not reflect what I defined in table TCURR. Instead, it reflects the exchange rate used by the old depreciation area. Help anyone? We are already in a production client and transfer/retirement of all the assets is not an option the client would like to undertake.
Edited by: Patrick on Nov 6, 2008 4:45 AM

Aperture 2.1.3 Export Problems with Cropped Photos

I ran into an odd problem after updating to 2.1.3. I was trying to upload to a Picasa album via "aperture-picasa-plugin", which I had used before without problems. The resulting export had problems with two photos I had cropped from landscape to portrait size. The resulting exports had the entire uncropped/original content "squeezed" into a photo matching the cropped size, so the exported pics were squished making everything look tall and skinny. (I found it especially odd that stuff I had cropped out was back in, but the size was cropped.)
I assumed it was a problem with the plugin, so I exported to a file straight from Aperture and had the same problem. I had other crops that worked OK, but they appear to all be landscape to landscape with no change in aspect ratio.
Is anyone else having this problem?

YES!
I have seen this show up as well. I'm also using Aperture 2.1.3. I too thought it was the fault of the picasa plugin... but when I, like you, started doing my exports directly to files I noticed that they still had the same problem.
The horizontal 16x9 seems to be particularly vulnerable... And, yes, it almost looks as if the (pre-crop) master has been "squished" into the aspect ratio of the (post-crop) version. It is very strange, very annoying, and very intermittent. Although, I found that if I quit aperture, restart then re-export... I have better luck.
Boy, am I relieved to find somebody else who is having this problem. For a while there I thought I was going nuts.
-C.

Problems with result area in workbooks after upgrade to BW 3.5

Hi,
we are experiencing some problems with our workbooks after the upgrade to BW 3.5. When refreshing all queries in a workbook (that was there before 3.5) without selecting a specific query we get the message 'Result area cannot be found, specify a new one'. After selecting, the message appears again in an infinite loop.
Has anybody had similar problems and has found a solution for this?
Thanks,
EMS

Hi,
I am having that message, always if I delete a Sheet which contains an embeded query.
Even the sheet is deleted, the SAPBEX has information of all the embeded queries, and tries to find the Result area to put the data.
To find out if this is your case as well,
select an empty cell in a Sheet and continue like that, until all the embeded queries are been displayed.
Regards
Vasso
Message was edited by: VASSILIKI SIAGRI

Problem with Tools Area iView Creation - Help Needed.

Hi Guys,
I am having a small problem with the Tool Area Par, I downloaded the Par and have edited it and then redeployed it on the Portal, however when I am creating an iView I am getting the Following error:
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/every_user/general/defaultDesktop/frameworkPages/frameworkpage/com.sap.portal.toolAreaiView
Component Name : null
Page could not create the iView.
See the details for the exception ID in the log file
Can anyone suggest me what could be wrong and why I am not able to see the Iview and why I get this exception.
Thanks,
John.

Log File:
[code]
Component : com.sap.portal.navigation.toolarea.default
     at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:251)
     at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:267)
     at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:312)
     at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:385)
     at com.sapportals.portal.prt.connection.PortalRequest.getRootContext(PortalRequest.java:435)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:607)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:545)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sapportals.portal.prt.core.broker.PortalComponentInstantiationException: Could not instantiate implementation class com.sapportals.portal.navigation.ToolAreaiView of Portal Component com.sap.portal.navigation.toolarea.default because: Could not find implementation class
     at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:242)
     at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getComponentInstance(PortalComponentItemFacade.java:160)
     at com.sapportals.portal.prt.core.broker.PortalComponentItem.getComponentInstance(PortalComponentItem.java:732)
     at com.sapportals.portal.prt.component.PortalComponentContext.getComponent(PortalComponentContext.java:103)
     at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:242)
     ... 26 more
Caused by: java.lang.ClassNotFoundException: com.sapportals.portal.navigation.ToolAreaiView
Found in negative cache
Loader Info -
ClassLoader name: [com.sapportals.portal.prt.util.ApplicationClassLoader@2086d]
Parent loader name: [com.sapportals.portal.prt.util.ApplicationClassLoader@695f94]
References:
   not registered!
Resources:
   C:
usr
sap
J2E
JC00
j2ee
cluster
server0
apps
sap.com
irj
servlet_jsp
irj
root
WEB-INF
portal
portalapps
com.sap.portal.navigation.toolarea
private
classes
     at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:360)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:219)
     at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:228)
     ... 30 more
[/code]

Problem with Business area

hello,
any body please help me.
previously i have configured with business area. every thing working fine. but my client decided to work with profit center. then i have made changes with profit center, means all assignment i deleted. I changed all assignments in OKB9 changed to profit center. i have deleted business area assignment with sales area and plant.
but when i am creating sales order it is asking business area. even i am doing stock posting with movement type 561 it is giving the same message. so please let me know where i am doing wrong.
Thanks & regards
Bhakta

Hi,
in the "global parameters" for your company code, uncheck "Business area fin. statements".
Also make sure the field status groups you use for your accounts don't specify business area as a required field
Regards
Nikolas

PDF export - problem with embedded font

Dear all,
I refer to a problem which was already discussed [here|Export to PDF wrong font;. I was asked to start a new thread and provide further information. Here we are...
The issue is nearly the same:
- We have a solution which both has a WinForms and an .aspx UI.
- We have a report, used in both solutions.
- The WinForms solution uses the Crystal Viewer to preview and print and export and so on.
- The web solution creates a PDF file and prompts to open or save. In this PDF, the font is substituted with Arial. This is actually the concrete problem.
1) Version of CR
on MY machine (MAYBE different on production environment, I have to check this):
Crystal Reports 10 (10.0.0.53327)
Crystal Reports Basic Runtime forVisual Studio 2008 (10.5.0.0)
Crystal Reports runtime engine for .NET Framework 4 (64-bit) (13.0.0.99)
Crystal Reports , version for Visual Studio 2010 (13.0.0.99)
2) CR Service Packs installed
Nope.
3) web / win app?
Both, see description above.
4) Is this happening on dev or deployed system?
On deployed system. It ONLY affects the web solution on the server, which is a Win7 64bit. My developement machine also is a Win7 64bit, it works on this device. On a colleagues machine (WinXP) it works, too.
5) What is the actual font?
The Font was exclusively developed for the customer by a designer, but it is fully embeddable (I already checked this).
6) Link to a screen shot that shows the issue
I do not know whether this really helps to NOT see a font replaced by Arial...
I hope you can help me. If the description is a little confusing, please ask, I will try to explain better, promised. Thank you, have a nice weekend!
Greetings,
Jens

Hi Don,
thank you very much for your reply!
The font is True Type, embedding allows preview/print.
What exactly does "Then make sure the WEB Servers have access to the font." mean? It is installed on the machine. I'm not really familiar with that server config stuff, as it is usually not my job...
Do we have to install the update (it is called support pack 2, right?) on the developement AND the deployment machine? Or only on the developement environment?
Best regards,
Jens

Another pdf export problem with graphics missing

well, it seems that there have been quite a few export probs w/pdf.
i created some somewhat complex graphic files (wine labels) using keynote. then transfered them over to pages so that i would be able to print them
more easily. when transfering them to pdf files i lose some graphics.
the graphics that i lose are chinese characters...but only SOME of them.
i've tried pdf/x, still the same problem, but then i have that funny shaded
box around my letters.
i've tried exporting directly from keynote, but the pdf image is markedly
smaller than the oringinal document (with the comments hidden).
any ideas...even the genius bar is stumped.
macbook Mac OS X (10.4.8)

In general, if some Chinese characters behave in one way and some other ones in another, it is often because one uses the wrong kind of font. If you for example have the (simplified) character 话 and use a font for traditional Chinese it may sometimes fail - especially in MS Word.
That said, I cannot reproduce your particular problem here. Both Keynote and Pages seem to handle this as well as they possibly can for me.
Two things you can try:
1. Change font, to make sure that it matches the character.
2. Create another account on your Mac and see if you still have the same problem.
What did the characters look like? Any fancy formatting with shadows or colours?

Export problems with relation to audio in Adobe Premiere Pro HELP!!

I have been working on a school assignment for media on Adobe Premiere Pro CC and have come across a very frustrating issue that I have no idea about how to solve. it goes under the category of a 'technical difficulty'.
As I have alot of interviews and talking in my project for my Documentary I am shooting on Bullying for my Current Affair I have alot of audio to deal with and with my Rode VideoMic Pro when in conversation in the midst of an interview there is a constant 'hiss and crackle' that one can hear when watching hence I have used the audio affect of "DeNoiser" to get rid of this and it seems to work great on my workflow in my sequence in Premiere as I have reduced most clips to -15Db's. But when I export my project as I have done several times,the 'Denoiser' affect doesn't work for the first 3 seconds + for all clips that I have used to affect for. At the start of all the clips used with the affect there is a constant hiss and crackle and after 3 seconds it fades out??? Please help me with this very unusual problem as I want this to be a fantastic film on your fantastic software!
Thanks

I would not return Adobe, I would return the camera, it is not suited for editing. If you insist on editing that material and end up with pretty crappy results, play it out from a DVD player into a good tape based DV video camera thru analog in and pass it thru to firewire for capture.
To put it another way, when maximum achievable fidelity of video is 100, your camera is at 10% due to the heavy MPEG compression. You need to convert that to DV and you are left with around 8% due to DV compression, you then need to encode it again to MPEG and you end up with less than 1% out of a possible 100.

Gerber export problem with copper area's

Similar Messages

Maybe you are looking for