Gereral differences between 4.7 and ECC 6.0 from FI/CO view
Hi Guys
Can any one tell me key differences between 4.7 and ECC 6.0 from FI/CO view.
In interview what i must tell?
Thank you.
Please visit the following links:
[http://service.sap.com/erp]
[http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)]
[http://service.sap.com/instguides] --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
[http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf]
For Functionality Differences pls refer to the below site -
[http://solutionbrowser.erp.sap.fmpmedia.com/]
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Regards,
Ajit
Similar Messages
-
Difference Between 4.7 and ECC 5 /6 from SD Functional configur perspective
Can any one tell me what are the difference between 4.7 EE and ECC 5 / 6 FROM SD Functional configuartion persective.
Hi,
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.7 Then Select the Target Release Version which is "mySAP ERP 2004" or ECC 5.0
or "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Sales....
Select module like SD.......
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 5.0 & ECC 6.0 in service.sap.com.
Hope this helps you.
Do award points if you found them useful.
Regards
Tushar
P.S. Reward points if you find answer useful. -
Pls let what are the differences between 4.7 and Ecc 6.0.
Hi all,
Could you please let me know, we are going 4.7 to Ecc 6.0.
Pls let what are the differences between 4.7 and Ecc 6.0.Try the [Solution Browser|http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx].
Regards -
What are the differences between 4.6B and ECC
What are the differences between 4.6B and ECC ?.
ThanksRefer a similar post /message/1783778#1783778 [original link is broken] and my reply there in
You can go through the Release Notes for each of the versions after 4.6B (4.6C, 4.7 , ECC 5.0 & ECC 6.0)
Here are the Links
for SAP ERP Central Component 6.0
http://help.sap.com/saphelp_erp2005/helpdata/en/43/688055b88f297ee10000000a422035/content.htm
for 4.7 SAP R/3 Enterprise
http://help.sap.com/saphelp_47x200/helpdata/en/12/9d78d6d8f74043a32e82be87e433b7/content.htm
and for Release Notes on SAP Web Application Server 6.30
http://help.sap.com/saphelp_47x200/helpdata/en/2b/64fc3e9d3b6927e10000000a114084/content.htm
You can pick up the similar Release Notes for any version you are interested in -
Difference Between 4.7 and ECC 6.0 in case Of Travel mgmt.
Hi guys,
Please let me know what is the main difference between 4.7 and Ecc 6.0 in case of Travel management.
ThanksHi Pulla,
We use R/3 4.7 version for Travel Management (FI-TV) with fairly good features but the latest version ECC 6.0 which is Enterprise Central Component version 6.0 gives you the opportunity to use ESS/MSS ie, using portal to create the trips/claims as against interfaces.
Therefore one difference would be to get the work done easily by logging into a internet site and complete the trips/claims which in turn updates your database tables where as in 4.7 there is no such functionality to use portal to make an expense claim.
There might be other feature enhancements available in 6.0 which I am currently unaware of but surely SAP gurus in this forum will be able to provide more on that.
Hope the above provides more info.
Rgds
CONMJI -
LE/WM functionality difference between 4.6c and ECC 6.0
Hi,
I am looking for functionality differences between 4.6c and ECC 6.0 for LE and WM in particular. I have already checked the sites related to overall differences. I am particularly looking for differences between 4.6c and ECC 6.0 in Warehouse Management and Logistics Execution. Helpful answers will be rewarded.
cheers,
SarveshThis is what I have gathered from this thread.
R 4.7 New Functionality in WM:
Cross Docking
Value Added Services
Task and Resource Management
Dynamic Cycle Counting
Yard Management
Effect of ECC 5.0 on WM:
Archiving Data has been improved
ECC 6.0 Version comparison link
http://solutionbrowser.erp.sap.fmpmedia.com/
Picking Consolidation for many deliveries
RFID integration
Enhanced Cross Docking
Enhanced Task and Resource Management -
Difference between 4.6C and ECC 6.0
Hi Experts,
Does anyone have any document or list of changes which can give difference between 4.6C and ECC 6. for PM.
I dont need the details of release notes.I am interested in data which can mention changes like Tree structure, Long text from notificaiton to Order etc in the 2 versions.
Thanks,
ManishHi Manish,
If you have OSS ID, check this link
https://websmp206.sap-ag.de/erp-ehp
Goto Solution details and check Release & Component information that contains all the information you are looking for.
Regards,
L.Balachandar -
Main difference between 4.6c and ecc 5.0
Hi,
Please give me brief about difference between 4.6c and ECC 5.0
Thanks,
AshaHi Asha,
you can see in Tcode : UCCHECK .you modify the objects in unicode conversion.some functionality didn't support in ECC 5.0.
this is the brief documentation of that TCODE.
BAP Unicode Scan Tool UCCHECK
You can use transaction UCCHECK to examine a Unicode program set for syntax errors without having to set the program attribute "Unicode checks active" for every individual program. From the list of Unicode syntax errors, you can go directly to the affected programs and remove the errors. It is also possible to automatically create transport requests and set the Unicode program attribute for a program set.
Some application-specific checks, which draw your attention to program points that are not Unicode-compatible, are also integrated.
Selection of Objects:
The program objects can be selected according to object name, object type, author (TADIR), package, and original system. For the Unicode syntax check, only object types for which an independent syntax check can be carried out are appropriate. The following object types are possibilities:
PROG Report
CLAS Class
FUGR Function groups
FUGX Function group (with customer include, customer area)
FUGS Function group (with customer include, SAP area)
LDBA Logical Database
CNTX Context
TYPE Type pool
INTF Interface
Only Examine Programs with Non-Activated Unicode Flag
By default, the system only displays program objects that have not yet set the Unicode attribute. If you want to use UCCHECK to process program objects that have already set the attribute, you can deactivate this option.
Only Objects with TADIR Entry
By default, the system only displays program objects with a TADIR entry. If you want to examine programs that don't have a TADIR entry, for example locally generated programs without a package, you can deactivate this option.
Exclude Packages $*
By default, the system does not display program objects that are in a local, non-transportable package. If you want to examine programs that are in such a package, you can deactivate this option.
Display Modified SAP Programs Also
By default, SAP programs are not checked in customer systems. If you also want to check SAP programs that were modified in a customer system (see transaction SE95), you can activate this option.
Maximum Number of Programs:
To avoid timeouts or unexpectedly long waiting times, the maximum number of program objects is preset to 50. If you want to examine more objects, you must increase the maximum number or run a SAMT scan (general program set processing). The latter also has the advantage that the data is stored persistently. Proceed as follows:
- Call transaction SAMT
- Create task with program RSUNISCAN_FINAL, subroutine SAMT_SEARCH
For further information refer to documentation for transaction SAMT.
Displaying Points that Cannot Be Analyzed Statically
If you choose this option, you get an overview of the program points, where a static check for Unicode syntax errors is not possible. This can be the case if, for example, parameters or field symbols are not typed or you are accessing a field or structure with variable length/offset. At these points the system only tests at runtime whether the code is sufficient for the stricter Unicode tests. If possible, you should assign types to the variables used, otherwise you must check runtime behavior after the Unicode attribute has been set.
To be able to differentiate between your own and foreign code (for example when using standard includes or generated includes), there is a selection option for the includes to be displayed. By default, the system excludes the standard includes of the view maintenance LSVIM* from the display, because they cause a large number of messages that are not relevant for the Unicode conversion. It is recommended that you also exclude the generated function group-specific includes of the view maintenance (usually L<function group name>F00 and L<function group name>I00) from the display.
Similarly to the process in the extended syntax check, you can hide the warning using the pseudo comment ("#EC *).
Applikation-Specific Checks
These checks indicate program points that represent a public interface but are not Unicode-compatible. Under Unicode, the corresponding interfaces change according to the referenced documentation and must be adapted appropriately.
View Maintenance
Parts of the view maintenance generated in older releases are not Unicode-compatible. The relevant parts can be regenerated with a service report.
UPLOAD/DOWNLOAD
The function modules UPLOAD, DOWNLOAD or WS_UPLOAD and WS_DOWNLOAD are obsolete and cannot run under Unicode. Refer to the documentation for these modules to find out which routines serve as replacements.
cheers,
sekhar. -
Major and minor Functional difference between 4.6c and ecc 6 in SD module
Hi Gurus,
Will anyone will mail me doc or url that shows the Major and minor Functional difference between 4.6c and ecc 6 in SD module. Mail me at [email protected]
full points for helpful answer
Regards,
PVHi,
This website is very helpfull for version comparision, have a look at it.
<a href="http://solutionbrowser.erp.sap.fmpmedia.com/">Compare_Versions</a>
Cheers...
Santosh -
Difference between 4.6c and ECC 5.0
can anyone say what is the difference between 4.6c and ECC 5.0?
Hi,
Please check this link to find out the differences.
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a7455fd8-0301-0010-d7b5-c2103a49c255
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5ac31178-0701-0010-469a-b4d7fa2721ca
http://solutionbrowser.erp.sap.fmpmedia.com/
Regards,
Ferry Lianto -
Difference between 4.6c and ECC 6 in Organization Managemnt
Hi Experts,
I wanted know difference between 4.6c and ECC 6 especialy in Organization Managment. if any one having any related link pls send.
Regs,
BrahmaHi Brahma,
You can find the differences between 4.6C and ECC 6.0 with the below link :
http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx
Your responds is appreciated.
Regards
Sravan -
Difference between 4.7 and ECC 5/6
Hi Friends,
I am ABAP developer and would like to know the differences between 4.7 and ECC 5.0 and ECC 6.0 from a techincal perspective. I appreciate if you differentiate between each of them or 4.7 and ECC 5.0.
Regards
PrakashDear Prakash,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh
P.S. you can send me a mail at my mail id [email protected] for any specific details -
Difference between 4.7EE and ecc 6.0
hai sap legends,
what is the main difference between 4.7ee and ecc 6.0
Is there any changes in the screens
i am working still on 4.7 ee
thanks regards
kumarihi
IN 4.7EE it not based on netweaver software. but in ecc 6.0 is netweaver .
advantages of netweaver
With the SAP NetWeaver technology platform, organizations have a single infrastructure for uniform service definition, implementation, and usage based on Web services technology and standards. SAP NetWeaver supports enterprise services for user interaction, as well as application-to-application and business-to-business interactions through synchronous, asynchronous, stateful, and stateless communication models.
benefits
It creates new value from existing IT assets through the use of Web services. - It provides greater flexiblity for responding quickly to business change. - It ensures openness and interoperability between software systems.
thanks -
Difference between 4.6 and ECC 6.0
Can anybody tell me what is the difference between 4.6 and ECC 6.0 related to SD Module.
Hi Sunil,
. Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional perspective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, and QM.....
Click on Search
then it displays the Release Version and the Delta Functionality. Which can be downloaded to a word document if required.
And also check the release notes of ECC 6.0 in service.sap.com.
A2. When you are upgrading from 4.6C to ECC6
Nothing major, follow the same process you'd follow if you were updating PI service packs in R/3 or enhancing data sources. Empty queues in RSA7 and lbwq. Also empty setup tables through lbwg as the upgrade doesn't like it if these tables contain data. This is all on the R/3 side (although you empty RSA7 by running each delta TWICE in BW).
To transfer queues from lbwq to rsa7, execute jobs through LO cockpit (lbwe).
Some of your data sources could also be using sm13 instead of lbwq, so do check it out as well.
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't require solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get form master guide from service.sap.com/instguides.
Please go through the link that is shown here and if there is any doubts then feel free to ask.
A3. Major difference is ECC6 is net weaver product having WASJAVA+ABAP
secondly support Unicode apart from this we have other diff. you can get from master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
A4. Refer sdn thread and make a small search where u can find lot of information Reg this
olution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Refer below and search for posts on this topic on sdn
There are so many differences between the version in different objects
I
These are the some of the settings that are differed in the two versions and in that two objects
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
Upgrade from 4.6c to 6.0 ECC
upgrade from 4.7 to ecc 6.0
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula -
Differences between R/3 and ECC
Hi to all,
Any one tell me what are the difference between R/3 and ECC
what come on R/3?
What come on ECC?
Thanx in advance
tarun patelhi Tarun
check this
Re: difference between sapr/3 4.7 and sapr/3 ecc 5.0
Differences b/n 4.6c,4.7 and ECC 5.0
R/3 Enterprise v mySAP ERP 2003 v ECC 5.0 v mySAP ERP 2004
let me know u need more
bvr
Maybe you are looking for
-
How to Set up a Belkin F1UP0001 wireless print server in TIGER?
Hi, I've been trying to make HP Laserjet 1220 work with Mac, it works in Windows 2000, but when i downloaded the universal/binary driver at HP website the printer is not working, so i decided to attached my old printer server :(( and i dont know how
-
Req help in conversion of string to array of args
Hi, i need help in converting a string into array of args just like command line args i have a string s1 = 12 13 56 etc now i want to copy that into an array a[] a[0] = 12 a[1] = 13 etc Thanks for help
-
"artifacts" appear when converting PDF to CMYK
When using the Preflight "fixup" to convert a PDF to CMYK only (SWOP), I sometimes end up with jpeg-ish-looking artifacts being added around the edges of logos and in photos. I've been troubleshooting this for a while, changing settings and such, and
-
Problem in getting the image coordinates when i zoom in or zoom out
Hi, i have doubts with scaling (Zoom in and Zoom out) using following code but when i zoom in want to get the x and y coordinates but im getting resized coordinates , pls do the needful public class TiffTest extends JFrame implements MouseListener pu
-
Syntax error on include of Function Module (user exit) EXIT_SAPLRSAP_002
When I do a syntax check in the a routine within inlude ZXRSAU02 of FM EXIT_SAPLRSAP_002, I get an error. This object has been in production so I must be doing the syntax check incorrectly. The error is 'Field i_t_data is unknown. It is neither in o