German language buttons

Hello,
On the Carry out sourcing screen we get German buttons.
The screen 201 and other screens have been deleted and
regenerated again as per the  note -632982. still the inconsistencies are displayed at the interface.
For your information we are configuring EBP 5.0 stack 03  pls help us to resolve problem.
Regards,
Santosh

Hi !
Does your problem still exist ?
Did the OSS-note have any effect ? I remeber some of the texts corrected and some still being wrong. We solved the problem via an OSS call. It ended up in a modification on the generated screen on SAP´s advice.
Regards,
Christiane

Similar Messages

  • Changing the Portal's UWL Approval Buttons from English to German Language

    Dear SAP Peeps,
    In the portal's universal worklist, the approved and rejected buttons needs to be change into its corresponding german language.
    I've log on to the SAP development system in german language and make the necessary change in the workflow. But when it is transported to the test system, the change doesn't reflect. I'm not sure if this is the correct solution as upon checking the portal, wrong text descriptions still appears upon creating a new work item.
    Can you help me here?
    Thanks in advance!

    Hello, luisanna107. 
    Thank you for visiting Apple Support Communities. 
    Here is some information that you may find help helpful.  Please note that not all movies include the option for multiple supported languages.  You may also want to see if German subtitles are available. 
    iTunes: Language settings for video
    http://support.apple.com/kb/HT5562
    Cheers,
    Jason H. 

  • Physical Inventory Document prinout in German Language

    Hello all MM Gurus,
    I have a problem with taking the printout for physical inventory document. Actually, my client wants some changes in the current physical inventory form but these changes should effect only when the form printout is taken in German language. We have made the necessary changes to the form INVENT but when we are logging into SAP system in German language, we are not able to see the changes. It is still printing the old form only.
    When we are taking the printout for physical inventory documents through the transaction MI21, we don't see any language key there. So, can anyone please tell me where we can give the language key for taking the printout of physical inventory documents?
    Normally, in Purhcasing documents case, we can see the language key in MESSAGES button. But in this case of physical inventory document, I am not able to see any language key maintained.
    I hope I am clear with my problem. If you have any idea on the above issue, please do tell me. I will be very much thankful to you all.
    Thanks and Regards,
    Umakanth

    Hi,
    The appropriate changes shall be done on teh form validating with the logon language.
    that way you can control that teh intended changes print only when the logon language is german.
    You can use system variable for logon language and take help of tech guy for achieving the same.
    hope this helps
    regards

  • N72 German Language

    Hello,
    I have bought a N72 that has been made in Beijing in Bangladesh, but the only languages available on the phone are English, Philipino, Indonesian and Malaysian. I have asked in a Nokia Care Center today but they said they can't install a German Language Pack therer I also tried updating the firmware but it already had the newest preinstalled. Isn't there any other way to get German language on the phone?????????

    Help should be provided by a Nokia Care Point to add languages to your phone. There may be a small charge for this service.
    Care points/service centres and repair info:
    UK • Europe • Asia-Pacific • USA •
    Canada • Middle East and Africa
    Any other country: Click here, select your country, go to the support section, then select repair.
    By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
    The day we stop improving is the day we stop being good.

  • 30EA3: German language bug with user defined reports still not fixed

    In 30EA2: Limited folder functionality with German language
    I wrote about a bug in 30EA2. Was this message noticed by the developers?
    The bug still exists in 30EA3.
    In new folders for user definded reports only the options "Kopieren" and "Exportieren" (copy and export) are available, when SQL-Deverloper runs in German language mode.
    A workaround is to force language to English with the line
    AddVMOption -Duser.language=en
    in sqldeveloper.conf

    I made a new thread for the same bug in 3.1EA2:
    3.1EA2 Old bug with German language settings still exists
    I have some hope, that my problem finally got noticed by the developers.

  • 3.1EA2 Old bug with German language settings still exists

    In the past I wrote several times about a bug in SQL Developer when running in German language mode. This bug is still not fixed in 3.1 EA2:
    In new folders for user definded reports only the options "Kopieren" and "Speichern unter ..." ('Copy' and 'Cave as') are available, when SQL-Deverloper runs in German language mode. Other options like "Bearbeiten, Neuer Ordner, Neuer Bericht, Ausschneiden, Einfügen, Löschen" (Edit, New Folder, New Report, Cut, Paste, Delete) are missing. A workaround is to force language to English with the line
    AddVMOption -Duser.language=en
    in sqldeveloper.conf
    I mentioned it first in Re: Folders with limited functionality about version 2.1.1.64 and then in 30EA2: Limited folder functionality with German language 3.0 EA2 and German language bug with user defined reports still not fixed Beta Release 3.0 EA3
    Edited by: user1775992 on 22.11.2011 03:30

    I have raised a bug on this issue and I am actively looking into it.

  • Sharepoint 2013: Problem / Error when creating Variation Hierarchy for French and German Languages from Variation root EN

    Hi,
    I have a website with English and Arabic Language Packs installed. I have the corresponding Variation heirachies created and the whole site collection is published.
    Recently the client asked for french and german languages to be accomodated as well. So I followed the same approach I did for English and arabic (installed the language packs) for foundation, ran ocnfiguration wizard, installed server language pack &
    ran configuration wizard.
    But after creating the variation label, when i try to create the variation heirarchy, I am getting the following error.
    "Unknown failure when creating a variation of page http://server:port/en/pages/default.aspx in label /fr/Pages/default.aspx.
    The Variations Create Hierarchies job failed with the following error message&  Unknown failure when creating a variation of site
    http://server:port/en in label fr."
    Am not sure what is going wrong. Appreciate a feedback.
    Thanks,
    SSP
    SSP

    Hi,
    According to your description, my understanding is that the error occurred when you created the Variation Hierarchy for French and German Languages from Variation root EN.
    I recommend to check the Resources folder located at C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15 to see if the file core.fr-FR.resx exists in the folder.
    Here is a similar thread for you to take a look:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/611575b2-d129-44c6-814b-2e5782178850/unknow-failure-when-creating-variations-in-sharepoint-2013-is-this-a-bug-in-sharepoint-2013-rtm?forum=sharepointadmin
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Windows 8 installation failure with German language pack

    Hi,
    I have a Lenovo ThinkPad Edge E330 with Windows 8. We just received it over Xmas - nice product. Just one Thing so far: I can't get the German language pack installed. Language, Keyboard layout and other regional Settings are set to German. After downloading the German language pack through Language->German->options->Download and Install Language pack (German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP])I always run into the following error during the Installation (download seems to be fine, error happens after about 2/3 of the Installation - if you believe the Progress bar). From the Event Viewer:
    Installation Failure: Windows failed to install the following update with error 0x80070002: German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP].
    I already tried quite some stuff without success: no pending Upgrades, several reboots, switching off Firewall/anti-Virus, selective reboot just with Winodws Services and Startup stuff, ... No success.
    Does anybody have seen a similar Problem? Anybody with a solution to get the German language pack finally installed?
    Thanks in advance for your Support,
    Ingo
    Event-Details:
    System
    Provider
    [ Name]
    Microsoft-Windows-WindowsUpdateClient
    [ Guid]
    {945A8954-C147-4ACD-923F-40C45405A658}
    EventID
    20
    Version
    1
    Level
    2
    Task
    1
    Opcode
    13
    Keywords
    0x8000000000000028
    TimeCreated
    [ SystemTime]
    2012-12-28T10:06:26.588367000Z
    EventRecordID
    2032
    Correlation
    Execution
    [ ProcessID]
    388
    [ ThreadID]
    2640
    Channel
    System
    Computer
    Lenovo-PC
    Security
    [ UserID]
    S-1-5-18
    EventData
    errorCode
    0x80070002
    updateTitle
    German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP]
    updateGuid
    {B9991A98-7903-4A91-B17A-818B1C1D9633}
    updateRevisionNumber
    200
    serviceGuid
    {9482F4B4-E343-43B6-B170-9A65BC822C77}

    Hi SOL
    For more information , please find the below download link.
    http://software.cisco.com/download/release.html?mdfid=282806052&release=8.6.6&relind=AVAILABLE&flowid=221&softwareid=282774363&rellifecycle=&reltype=latest
    Thank you
    please rate all useful information

  • How to identify german language in a program

    Hi All,
    i have one requirement. that is how to identify german language in a program.(suppose text elements, data elements are in german language our program should identify that german language). Anybody have solution for this, pls send me as soon as possible.
    Thanks for all in advance.
    Thanks & Regards,
    Nagarjuna.

    Hi Nagarjuna,
    2 possible approaches:
    1. Source language: Every program is initially created with source language = logon language. Sored in TRDIR-RLOAD.
    2. Try to read program texts in specific language (DE).
        READ TEXTPOOL pv_repid INTO lt_textpool LANGUAGE 'D'.
        IF sy-subrc                           = 0.
          MESSAGE s000(R1)
            WITH 'German texts present in' pv_repid '' ''.
        ELSE.
    Regards,
    Clemens

  • Time fields disabled with german language package (Work Manager 6.0.0)

    Hi all,
    I detected a problem with WorkManager 6.0.0 on SMP 2.3 SP3 on the german language packet. The fields hours and minutes are disabled and can't be selected at any position where it is possible to select the time. I assume it is some sort of timezone error, but to make sure I removed the german umlauts to check if it's an encoding problem.
    If I switch back to English the fields are clickable again.
    Has anyone a suggestion how I can fix this problem.
    Kind regards,
    thomas

    Hi all,
    I detected a problem with WorkManager 6.0.0 on SMP 2.3 SP3 on the german language packet. The fields hours and minutes are disabled and can't be selected at any position where it is possible to select the time. I assume it is some sort of timezone error, but to make sure I removed the german umlauts to check if it's an encoding problem.
    If I switch back to English the fields are clickable again.
    Has anyone a suggestion how I can fix this problem.
    Kind regards,
    thomas

  • I keep getting the iTunes help screen in German Language on restart, how do I stop this?

    Ugraded to iTunes 10.5 and now on restart I keep getting the iTunes help screen in German Language how do I stop this?

    Hi Thanks,
    I could only see posts from some months ago and thought I had something different.
    Looks like I have not been using the correct search terms.
    Will wait and see what happens.

  • I have installed Itunes on my laptop. However, the apple store opens in German language. I need it in English. How can i change the language for istore through the itunes?

    I have installed Itunes on my laptop. However, the apple store opens in German language. I need it in English. How can i change the language for istore through the itunes?

    Go to the bottom of the page, click the flag, then select your country.

  • Only German Language fails in Portal view of SUS app

    Hello,
    We are running SAP's SUS (Supplier Self Services) through the portal.  Everything works fine in any language except German.  German works when using SUS through the backend. 
    When a user with the German Language set opens the Self Services tab the background image appears but the page stays blank.  No errors, except the page should not be blank.
    We have a QA system and the German Language still works there.  We also have SAP's EBP connected through the portal and the German language works there as well.
    Does this indicate a problem with Portal or SUS?
    Thanks,
    Matt
    Edited by: Matt Herbert on May 27, 2009 4:27 PM

    I ran /$OTR (tcode) to clear out the buffer.
    SAP Note 807604
    Thanks,
    Matt

  • Problems loading plugin on Austrian (German language) machines

    I've just has a rather embarassing session of trying to show my site on PCs in Autria and I wondered if other people had had special problems with German language machines (other than trying to find the "Y"). We downloaded the JRE and netscape was amongst the browsers recognised at installation time yet, when we tried to run the applet it went it displayed the "Plugin required" image. My web pages uses the combination/selection of <embed and <object tags recomended by Sun.
    We also tried Mozilla and IE. Mozilla just closed itself when displaying the page, IE displayed the applet area blank.
    I run this applet page routinely at home on Netscape, IE and Mozilla without problems.
    Even more embarassing one Austrial version of IE actually crashed apparently just trying to run my Javascript.
    This creates something of a problem, I'm heading back to the UK tomorrow and if it's something to do with the Locale it's not going to be easy to sort out.

    well afaik(and i am austrian) we dont hav our "own" version of nething.
    i personally havnt seen any problems with the Y, only the special characters such as �,�,� and � might cause problems.
    neither did i ever encounter problems with the JRE, which u mentioned.
    this may be a problem of the Windows version u were running, like win98. i remember some problems in the past that sound like yours.
    But if u want me to try something, just shot me a message

  • Need to print  in german language in output.

    Hi,
           I need to print my vendor address and delivery address in german language (fetching data from database table) in my form.
           How I can achieve this.Please help,
    Regards,
    Himanshu

    Hi,
    So i think you should to call fetch the data when your are about to print a form..
    best way would be to call a subroutine in a script editor.. this routine will fetch all the data from database table ,, and it wud just like a ABAP form ..
    Pls follow the steps,,
    1. Create a Z program in SE38, declare all the structure related to data fetching in that,, perform all data selection,, fill these data structure..
    2. You should to paste your code within the Form and endform .. Like below:
    REPORT Zcall_in_script .
    form data_fetch.
    all the data retreval part .....
    endform.
    3. Now in your script ,, to call this form use below syntex,,
    /:   PERFORM data_fetch  IN  PROGRAM Zcall_in_script
    /:   USING &w_value1&
    /:   USING &w_value2&
    /:    CHANGING &w_value3&
    /:   CHANGING &w_value4&
    /:   ENDPERFORM
    4. here you can have the w_value3 & w_value4 as your fetch value .
    Edited by: Lokesh Tarey on Jul 26, 2010 2:10 PM

Maybe you are looking for