German language umlauts

Hi everybody!
I'm trying to make a URLConnection and then POST an xml-sequence as bytes to another server....
but my german umlauts (like "�", "�", "�") arrive as "?" .
has anybody suggestions?
thanks in advance!
greetings,
c.

Hi!
i've just fixed it.. ;-)
if enybody else is interested, there it goes:
// Create the encoder and decoder for ISO-8859-1
Charset charset = Charset.forName("ISO-8859-1");
CharsetEncoder encoder = charset.newEncoder();
try {
// Convert a string to ISO-LATIN-1 bytes in a ByteBuffer
// The new ByteBuffer is ready to be read.
ByteBuffer bbuf = encoder.encode(CharBuffer.wrap("a string"));
} catch (CharacterCodingException e) {
good luck!
greetings,
christine

Similar Messages

Time fields disabled with german language package (Work Manager 6.0.0)

Hi all,
I detected a problem with WorkManager 6.0.0 on SMP 2.3 SP3 on the german language packet. The fields hours and minutes are disabled and can't be selected at any position where it is possible to select the time. I assume it is some sort of timezone error, but to make sure I removed the german umlauts to check if it's an encoding problem.
If I switch back to English the fields are clickable again.
Has anyone a suggestion how I can fix this problem.
Kind regards,
thomas

Hi all,
I detected a problem with WorkManager 6.0.0 on SMP 2.3 SP3 on the german language packet. The fields hours and minutes are disabled and can't be selected at any position where it is possible to select the time. I assume it is some sort of timezone error, but to make sure I removed the german umlauts to check if it's an encoding problem.
If I switch back to English the fields are clickable again.
Has anyone a suggestion how I can fix this problem.
Kind regards,
thomas

BB Tour German Language Support

Is anybody aware of an option for German language support on the Tour (or a work around)? I am receiving several SMS from Europe on a daily basis and it takes some guesswork on my end, trying to figure out certain words since the Tour inserts random characters for umlauts such as ü ö ä and so on.... Gets to be very frustrating after a wile. With the Tour being marketed as a world phone I am rather surprised that this is not an option, unlike with the Storm OS where German is an option. But then again - the Storm is sold in Europe. Please help

I'm new to this forum and I'm having the same problems with texts from my German colleagues. It would be nice if Blackberry or someone here, in the forum, could let us know about a German language option for the Tour.

Send Email in German Language

hi All
My scenario is File - XI- R/3 (RFC). In this case if there is any error in RFC while saving data in R/3 , error will be send back to XI , From XI, I have to trigger email regarding this error to my Client. But client wants this <b>mail in German Language</b>. I am using Mail Adapter for the same.
Is there any provision in mail adapter to send mail in german language?
Regards
Sheetal

HI Sheetal
Check the link given below.. He is getting the attachments in German Language...
Mail Adapter - PayloadSwapBean - MessageTransformBean - German umlauts
The following site may help you
http://64.233.179.104/search?q=cache:xA-raKtB_YkJ:https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1db5e190-0201-0010-1c90-d9de570c6b18end-to-endalertconfiguration%2BXI%2B+SAP&hl=en&gl=in&ct=clnk&cd=2
Also see the Note.. 960501
Cheers..
Vasu
<i>** Reward Points if found useful **</i>

30EA3: German language bug with user defined reports still not fixed

In 30EA2: Limited folder functionality with German language
I wrote about a bug in 30EA2. Was this message noticed by the developers?
The bug still exists in 30EA3.
In new folders for user definded reports only the options "Kopieren" and "Exportieren" (copy and export) are available, when SQL-Deverloper runs in German language mode.
A workaround is to force language to English with the line
AddVMOption -Duser.language=en
in sqldeveloper.conf

I made a new thread for the same bug in 3.1EA2:
3.1EA2 Old bug with German language settings still exists
I have some hope, that my problem finally got noticed by the developers.

3.1EA2 Old bug with German language settings still exists

In the past I wrote several times about a bug in SQL Developer when running in German language mode. This bug is still not fixed in 3.1 EA2:
In new folders for user definded reports only the options "Kopieren" and "Speichern unter ..." ('Copy' and 'Cave as') are available, when SQL-Deverloper runs in German language mode. Other options like "Bearbeiten, Neuer Ordner, Neuer Bericht, Ausschneiden, Einfügen, Löschen" (Edit, New Folder, New Report, Cut, Paste, Delete) are missing. A workaround is to force language to English with the line
AddVMOption -Duser.language=en
in sqldeveloper.conf
I mentioned it first in Re: Folders with limited functionality about version 2.1.1.64 and then in 30EA2: Limited folder functionality with German language 3.0 EA2 and German language bug with user defined reports still not fixed Beta Release 3.0 EA3
Edited by: user1775992 on 22.11.2011 03:30

I have raised a bug on this issue and I am actively looking into it.

Sharepoint 2013: Problem / Error when creating Variation Hierarchy for French and German Languages from Variation root EN

Hi,
I have a website with English and Arabic Language Packs installed. I have the corresponding Variation heirachies created and the whole site collection is published.
Recently the client asked for french and german languages to be accomodated as well. So I followed the same approach I did for English and arabic (installed the language packs) for foundation, ran ocnfiguration wizard, installed server language pack &
ran configuration wizard.
But after creating the variation label, when i try to create the variation heirarchy, I am getting the following error.
"Unknown failure when creating a variation of page http://server:port/en/pages/default.aspx in label /fr/Pages/default.aspx.
The Variations Create Hierarchies job failed with the following error message& Unknown failure when creating a variation of site
http://server:port/en in label fr."
Am not sure what is going wrong. Appreciate a feedback.
Thanks,
SSP
SSP

Hi,
According to your description, my understanding is that the error occurred when you created the Variation Hierarchy for French and German Languages from Variation root EN.
I recommend to check the Resources folder located at C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15 to see if the file core.fr-FR.resx exists in the folder.
Here is a similar thread for you to take a look:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/611575b2-d129-44c6-814b-2e5782178850/unknow-failure-when-creating-variations-in-sharepoint-2013-is-this-a-bug-in-sharepoint-2013-rtm?forum=sharepointadmin
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Windows 8 installation failure with German language pack

Hi,
I have a Lenovo ThinkPad Edge E330 with Windows 8. We just received it over Xmas - nice product. Just one Thing so far: I can't get the German language pack installed. Language, Keyboard layout and other regional Settings are set to German. After downloading the German language pack through Language->German->options->Download and Install Language pack (German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP])I always run into the following error during the Installation (download seems to be fine, error happens after about 2/3 of the Installation - if you believe the Progress bar). From the Event Viewer:
Installation Failure: Windows failed to install the following update with error 0x80070002: German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP].
I already tried quite some stuff without success: no pending Upgrades, several reboots, switching off Firewall/anti-Virus, selective reboot just with Winodws Services and Startup stuff, ... No success.
Does anybody have seen a similar Problem? Anybody with a solution to get the German language pack finally installed?
Thanks in advance for your Support,
Ingo
Event-Details:
System
Provider
[ Name]
Microsoft-Windows-WindowsUpdateClient
[ Guid]
{945A8954-C147-4ACD-923F-40C45405A658}
EventID
20
Version
1
Level
2
Task
1
Opcode
13
Keywords
0x8000000000000028
TimeCreated
[ SystemTime]
2012-12-28T10:06:26.588367000Z
EventRecordID
2032
Correlation
Execution
[ ProcessID]
388
[ ThreadID]
2640
Channel
System
Computer
Lenovo-PC
Security
[ UserID]
S-1-5-18
EventData
errorCode
0x80070002
updateTitle
German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP]
updateGuid
{B9991A98-7903-4A91-B17A-818B1C1D9633}
updateRevisionNumber
200
serviceGuid
{9482F4B4-E343-43B6-B170-9A65BC822C77}

Hi SOL
For more information , please find the below download link.
http://software.cisco.com/download/release.html?mdfid=282806052&release=8.6.6&relind=AVAILABLE&flowid=221&softwareid=282774363&rellifecycle=&reltype=latest
Thank you
please rate all useful information

How to identify german language in a program

Hi All,
i have one requirement. that is how to identify german language in a program.(suppose text elements, data elements are in german language our program should identify that german language). Anybody have solution for this, pls send me as soon as possible.
Thanks for all in advance.
Thanks & Regards,
Nagarjuna.

Hi Nagarjuna,
2 possible approaches:
1. Source language: Every program is initially created with source language = logon language. Sored in TRDIR-RLOAD.
2. Try to read program texts in specific language (DE).
    READ TEXTPOOL pv_repid INTO lt_textpool LANGUAGE 'D'.
    IF sy-subrc                           = 0.
      MESSAGE s000(R1)
        WITH 'German texts present in' pv_repid '' ''.
    ELSE.
Regards,
Clemens

I keep getting the iTunes help screen in German Language on restart, how do I stop this?

Ugraded to iTunes 10.5 and now on restart I keep getting the iTunes help screen in German Language how do I stop this?

Hi Thanks,
I could only see posts from some months ago and thought I had something different.
Looks like I have not been using the correct search terms.
Will wait and see what happens.

I have installed Itunes on my laptop. However, the apple store opens in German language. I need it in English. How can i change the language for istore through the itunes?

I have installed Itunes on my laptop. However, the apple store opens in German language. I need it in English. How can i change the language for istore through the itunes?

Go to the bottom of the page, click the flag, then select your country.

Only German Language fails in Portal view of SUS app

Hello,
We are running SAP's SUS (Supplier Self Services) through the portal. Everything works fine in any language except German. German works when using SUS through the backend.
When a user with the German Language set opens the Self Services tab the background image appears but the page stays blank. No errors, except the page should not be blank.
We have a QA system and the German Language still works there. We also have SAP's EBP connected through the portal and the German language works there as well.
Does this indicate a problem with Portal or SUS?
Thanks,
Matt
Edited by: Matt Herbert on May 27, 2009 4:27 PM

I ran /$OTR (tcode) to clear out the buffer.
SAP Note 807604
Thanks,
Matt

Problems loading plugin on Austrian (German language) machines

I've just has a rather embarassing session of trying to show my site on PCs in Autria and I wondered if other people had had special problems with German language machines (other than trying to find the "Y"). We downloaded the JRE and netscape was amongst the browsers recognised at installation time yet, when we tried to run the applet it went it displayed the "Plugin required" image. My web pages uses the combination/selection of <embed and <object tags recomended by Sun.
We also tried Mozilla and IE. Mozilla just closed itself when displaying the page, IE displayed the applet area blank.
I run this applet page routinely at home on Netscape, IE and Mozilla without problems.
Even more embarassing one Austrial version of IE actually crashed apparently just trying to run my Javascript.
This creates something of a problem, I'm heading back to the UK tomorrow and if it's something to do with the Locale it's not going to be easy to sort out.

well afaik(and i am austrian) we dont hav our "own" version of nething.
i personally havnt seen any problems with the Y, only the special characters such as �,�,� and � might cause problems.
neither did i ever encounter problems with the JRE, which u mentioned.
this may be a problem of the Windows version u were running, like win98. i remember some problems in the past that sound like yours.
But if u want me to try something, just shot me a message

Need to print in german language in output.

Hi,
       I need to print my vendor address and delivery address in german language (fetching data from database table) in my form.
       How I can achieve this.Please help,
Regards,
Himanshu

Hi,
So i think you should to call fetch the data when your are about to print a form..
best way would be to call a subroutine in a script editor.. this routine will fetch all the data from database table ,, and it wud just like a ABAP form ..
Pls follow the steps,,
1. Create a Z program in SE38, declare all the structure related to data fetching in that,, perform all data selection,, fill these data structure..
2. You should to paste your code within the Form and endform .. Like below:
REPORT Zcall_in_script .
form data_fetch.
all the data retreval part .....
endform.
3. Now in your script ,, to call this form use below syntex,,
/:   PERFORM data_fetch IN PROGRAM Zcall_in_script
/:   USING &w_value1&
/:   USING &w_value2&
/:    CHANGING &w_value3&
/:   CHANGING &w_value4&
/:   ENDPERFORM
4. here you can have the w_value3 & w_value4 as your fetch value .
Edited by: Lokesh Tarey on Jul 26, 2010 2:10 PM

Welcome mail on my new icloud email is in German language although my setting is English

I just opened a new icloud mail account, the welcome message that came from apple is in German language although my mail "Setting" is English language

If secureserver.net is IMAP then all emails will by definition come back unless you dragged emails into folders residing only "On My Mac" in Apple Mail on your previous machine. If secureserver.net is POP and your mail is not coming back, the only thing that could be from is the messages being deleted from the server, esp. if they aren't showing up in web mail. It's even possible that the thieves deleted all of your messages. Check you webmail's trash bin.
Do you have a backup? Can you contact your email provider about possible data recovery? Sorry, this sounds terrible!

German language umlauts

Similar Messages

Maybe you are looking for