German T-Online Connection with Bordermanager

We have a SBS SUite 6.5 with Bordermanger 3.8
We need now Access to the "Classic Gate Software" from the German ISP t-
online with their Software over the Bordermanager.
We need this for Banking Software with HBCI Support.
In the t-online Software we can make this throuh an Socks Clienet Version
n 4 or 5.
I activated the Socks IPIPX gateway with different configurations but
nothing works.
I get the Answer: CEPT Failure (R62 Function: 3104, Winsock
Failure:10054, Response: 0x453)
Is there a known Working SOlution or a turnaround ?
What can we do?
(With an other Firewall (KEN! from AVM.de) the Socks Connection works!)
Volker Busch

Hi,
[email protected] wrote:
>
> Is there a known Working SOlution or a turnaround ?
> What can we do?
> (With an other Firewall (KEN! from AVM.de) the Socks Connection works!)
Well, first of all you need to find out if Socks is working at all. Two
applications that I know for a fact that work using BMs Socks5 are AIM,
and the good old Netscape 4.8.
How do you have access control and authentication for Socks configured?
To test, I'd possible try it without authentication, and an any to any
PORT access rule.
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de

Similar Messages

I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my we

I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my website online (with Firefox, Explorer, Chrome browser) I always get the message 'Forbidden, You don't have permission to access / on this server.' Can somebody help me please? I have to get my website online..Thank you!

Hello Els,
it's well known, that in all these cases you describe I'm not a friend of a detailed Troubleshooting (I see Nancy#s smile already).
To be able to be independent in all this things It is one of the reasons why I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
To manage several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
http://filezilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
Mac: Mac OS X (Use: Show additional download options)
http://filezilla-project.org/download.php
Of course, you also need all the access data to reach your server and for MIME issues, you should contact your web host/provider.
Good luck!
Hans-Günter
P.S.
Since I use two screens, the whole thing became even more comfortable.

I need a request code for offline activation. Because i cannot connect with adobe server for online activation. But I receive "The request code is invalid." by generate answer code.

I need a request code for offline activation. Because i cannot connect with adobe server for online activation. But I receive "The request code is invalid." by generate answer code.

Dear Anubha,
I hope these windows illustrate what I am facing.
The above window shows the prompt that the software requires activation.
The version is 8.1.0.
This next window is the point where I select activation by phone.
This final window shows that the "response code" is not returned. I get an
"Activation Number" instead.
Steven
On Tue, Jan 27, 2015 at 10:50 PM, Anubha Goel <[email protected]>

Skype connectivity with lync online plan1

hi ,recently I purchased lync online plan1 to enable skype connectivity with lync but not able to add any contact from lync client as I am using lync 2010 client at windows pc and lync 2011 client at mac PC
and I already enabled external communication setting for public messenger like skype from lync admin center(office365 based).

Hi skype user,
As Edwin mentioned, you could try to update your client to the latest version.
For Windows, you could install the Lync 2013 Basic.
http://www.microsoft.com/en-us/download/details.aspx?id=35451
For Mac OS , you could install the latest update “October 2014 update for Lync for Mac 2011 14.0.10”
http://www.microsoft.com/en-us/download/details.aspx?id=36517
If it still does not work, you could post the question on Office365 forum for assistance. Thank you for your understanding.
http://community.office365.com/en-us/f/166.aspx
Best regards,
Eric

I bought an iphone 5 online, its with o2 but when I went to o2 to get a sim card it did not connect according to the shop assistant, is there any way to determine if its stolen and if so is there anything i can do? HELP

i bought an iphone 5 online, its with o2 but when I went to o2 to get a sim card it did not connect according to the shop assistant, is there any way to determine if its stolen and if so is there anything i can do? HELP

it is dinner time but 72oz steak....whew dont know about that! 2 " of snow yesterday 60 degrees today.... gotta love the texas panhandle!

Problem connecting with users online

Each time I try connecting with LS chess users online, I keep getting a reply 'something went wrong, try again later'. Pls could you help me fix this?

Hi, thanks for your answer.
I changed the things, but now this problem appears.
org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library librfc. Found version "620.0.941" but required at least version "620.0.1220".)
What can i do with this mistake?

Connectivity with sql server

Dear community members;
I am using Oracle 10g DB. Now I want to connect with SQL Server 2005. Is there any possiblity for connectivity. Because we have to pick some data from sqlserver on online transaction entry time.
Waiting for usefull response.
Thanks
Shahab Ahmed Khan

I am using oracle 11gR1 on windows 2003.
This is my initaccessdb.ora(Path HS/ADMIN)
HS_FDS_CONNECT_INFO = ACCESSDB
HS_FDS_TRACE_LEVEL = OFF
Listner File
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = APPSERVER)(PORT = 1521))
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC=
(SID_NAME=PLSExtProc)
(ORACLE_HOME=E:\app\Administrator\product\11.1.0\db_1)
(PROGRAM=extproc)
     (SID_DESC =
     (SID_NAME = accessdb)
(ORACLE_HOME = E:\app\Administrator\product\11.1.0\db_1)
(PROGRAM = ACCESSDB)
     (ENVS=LD_LIBRARY_PATH=D:\)
TNSNAME.ORA
ORCL =
(DESCRIPTION =
     (ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.0.14)(PORT = 1521))
     (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME= ORCL)
ACCESSDB =
(DESCRIPTION=
     (ADDRESS =(PROTOCOL = TCP)(HOST=172.16.0.14)(PORT=1521))
          (CONNECT_DATA =
          (SERVICE_NAME=ACCESSDB))
               (HS = OK)
I successfully completed all steps as mentioned in your sending links documents but when i test my dblink query it gives the error message
SQL> conn sys as sysdba
Enter password:
Connected.
SQL> conn ahmed
Enter password:
Connected.
SQL> drop database link test;
Database link dropped.
SQL> create database link test using 'ACCESSDB';
Database link created.
SQL> SELECT * FROM EMPLOYEE@TEST;
SELECT * FROM EMPLOYEE@TEST
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from TEST
Note: Please tell me that should i install ODBC driver ("Microsoft Access Driver *.mdb).If this should be installed then i have done correctly.
Thanks

Cannot open pages while connected with AEBS ?

I only have a dialup connection through AOL. Finally bought old style AEBS with modem so i could connect with my iBook at home. Seem to have it configured to network with my G5 ok. Got it to connect to AOL, i'm online. My problem is i can't open any pages. I usually use Firefox and it opens fine but after that i can't access any websites, same thing with Safari. Every thing works fine as long as i'm not connected through Airport. Where should i look to remedy this?
Power Mac Dual 2GHZ & iBook 1GHZ Mac OS X (10.4.8) PM 2.2 RAM
Power Mac Dual 2GHZ & iBook 1GHZ Mac OS X (10.4.8) PM 2.2 RAM AEBS w/modem
Power Mac Dual 2GHZ & iBook 1GHZ Mac OS X (10.4.8) PM 2.2 RAM

Hi Robert!
See if this AOL Internet access requires an update when
using AirPort helps.
If you are seeing an asterisk * when trying to
navigate to webpages, try this;
A fix for this is to change the modem scripts AOL is
using.
Sign Off, but don't quit AOL.
When signed OFF of AOL, but with the Sign-On screen
open, click: SET UP > Expert Set UP.
Click : Add TCP Connection to bring up new
dialog box.
Pull down the menu in Advanced Options - Connection
Scripts:
Change the connection script to TCP (DO NOT
use Airport)
Click Okay and close all windows.
Good Luck!
ali b
Thanks for your help, tried everything you suggested. Unfortunately nothing changed.
Power Mac Dual 2GHZ & iBook 1GHZ Mac OS X (10.4.8) PM 2.2 RAM

Crystal Server 2011 "Failed to open the connection" with 32 & 64 bit drivers are loaded

Brand new installation of Crystal Reports Server 2011 with CR Developer 2011 as well. Downloaded new Postgres and MySQL drivers for both the 32 and 64 bit ODBC definitions. Created a new report on the server to eliminate any migration driver incompatibility issues. Reports run fine in Developer but give the same "Failed to open the connection."
and still problems running the reports If I Save Data with the reports, I can click View to see the data, but they will not refresh.
All the articles I'm finding online seem to point to the issue with needing 32 & 64 bit drivers, but I've loaded both and built my ODBC connections with the 32 drivers in the SysWOW64 folder.
Logged in as Administrator. Any thoughts out there? Are there some new security measures?
Thanks in advance ...

Yes, Designer and CRS are on the same machine.
Good catch with the 5.1 driver. I loaded up the mysql-connector-odbc-5.1.13-win32 driver and used that. It alone failed when I made the ODBC connection with it. I see on the CRS 2011 Feature Pack 3 .pdf file that it says "Only 64-bit database connector middleware is supported" ... I downloaded the other mysql-connector-odbc-5.1.13-winx64 64bit file, but teh .msi and .zip versions failed on the load. Do I need that if it says that or should the first one be enough?
I've been trying to use a normal User DSN, no? Apparently I don't have access as a machine Administrator to do it as I get "You are logged on with non-Administrative privileges. System DSNs could not be created or modified." Having our server guys get that straightened out and we'll see. Had not heard of that actually but will give it a go.
You say I should create the DSN entries in the 64 bit version of the ODBC Data Source Administrator ... located in the system32 folder, not the SysWOW64 folder, where the 32 bit drivers are found, yes? Isn't that the "wrong" location to use I've been reading? Or are System DSNs different from a User DSN?
BIG thanks for the replies. I owe you beers!!!!!

I got a new modem and imac says connected with the airport, but cant get a web page to come up on either safari or firefox

I started having internet problems with all my devices in the house, ipod, imac, pc laptop, tablets, etc... found out after being on the phone with comcast for hours, they determined my modem that they supply was bad. So I have the new modem now and very simple to install it and get everything working. However, I cannot get online with a web browser of any sort on my imac. which had no issues before.
All my devices in the house work perfectly now with the new modem and my speeds are great, and even the imac (with the airporter) states it is connected. but I cant do anything pertaining to the internet. I have spent hours on the tech line with comcast and they cant seem to find the issue and said it is with my Imac, even though it was working fine before.
Does anyone have any ideas, is there simply something I'm missing, please help. As I stated before, everything else that we own works great and has great connection. and the Imac states it is connected, but mail, internet, non of that works...??????
Sean

Hello sstefanik
Check out the articles below to troubleshoot your issues with getting a proper connection with Wi-FI. Try creating a new Network Location and join your network to see if you can get on that way.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Using network locations (Mac OS X v10.6 and later)
http://support.apple.com/kb/ht5289
Regards,
-Norm G.

WRT1900AC and Macbook Pro Retina - refuses to connect with Wireless N

I have the first generation Macbook Pro Retina, and just recently upgraded my D-Link D-655 for the Linksys WRT1900AC. I also put the router on the first floor (the D-Link was in the basement) because there were some huge holes in wireless coverage I hoped to fix.
To my dismay, the thing will not negotiate a connection with ANY wireless N device as wireless N. When I set it to wireless-N only on 5 GHz, nothing will connect to it, and same with 2.4 GHz. My macbook's system report shows the network as being Wireless G on the 2.4 band and wireless A on the 5 GHz.
I have 50 MBPs internet here, and when I plug directly into the router, I get that. However, I am maxing out at 20 MBPs over wireless with both my macbook and my Samsung Galaxy S4.
I'm about at wits end, my next step is to return this thing. I have been on hold with support for 20 minutes, which is freakin eerie because they have no hold music or talking so it's just dead silent.
This morning I spent an hour on a live chat with support, and nothing she had me do made it better, and in fact any changes made it drop from 20-21 MBPs down to 16-17 maximum.
On her advice, I re-installed the firmware, downloading from online, and this had absolutely no effect. Any other ideas to try? I get these crappy connection speeds sitting 3 feet away from it. I live in a house, so no massive interference from neighbors (only 2 other wifi networks are visible)
Solved!
Go to Solution.

let me be clear here: I had the same slow speed with both my mac and my galaxy s4, it is not a mac problem. I had disabled media prioritization and the WMM thing in the settings for media prioritization. Yes I am sure I am connecting to the right SSID. The old router is DIR-655. Part of the reason I wanted to upgrade is it disconnected my galaxy s4 every 2 minutes (and many people have had that problem, a quick google search verified that the router just doesn't like galaxy s4). OS X 10.7.5 but as I said my Galaxy has the same issue - it does not connect as wireless N, and when I make the router Wireless N only, not one of the computers in the house can connect to it. That includes a Mac Mini, Galaxy S4, Macbook Air, Macbook Pro Retina, and a Chromecast (which only works on the 2.4 band, but same issue there).

Computer's can connect to wireless but I can't connect with e-book and i-pod

I have a wrt54g I can connect with 3 laptops and 1 desktop but my ebook and ipod connects once and a blue moon please help

Whats the Wireless settings you have setup on your Router (SSID, Channel, Security Mode)? Are you getting any error message when you are trying to connect to your wireless network?
If you have setup WEP security on your Router, when you are trying to connect to your wireless network input the "$" sign before the WEP key and then click on connect and then check if you are able to go online or not.

Problem setting up connection with 2wire USB adapter (BT Home Network 1200)

I keep on running into a brick wall setting up my internet connection on my newly purchased MacBook (I have never used a mac before, having used a PC for years). I am trying to set up my macbook as an additional computer on my BT Home Network 1200, and I have installed the drivers given on the 2wire CD, but even when I plug in the USB adapter, the Macbook does not seem to recognise it. The adapter looks something like this:
Anyway, the instructions given in the BT Home Network PDF manual seem to suggest that it is relatively straightforward, and that it is simply a matter of clicking the apple menu, selecting "control panels", selecting "TCP/IP", and then in the "connect via" box, clicking on the pulldown menu and selecting 2Wire PC Port. However, I am using 10.4.9 and it seems to me that this guide must have been written for an outdated version of Mac OS X because none of these instructions seem to make sense or work in the context of my macbook. At the moment, it seems like I won't be able to get my macbook online. Could someone please help explain to me how to get around this?

Any reference to 'Control Panels' will, indeed, be for Mac OS 9.x, the last version of which (9.2) was released in 2001.
My advice would be to return it to BT and ask them for an ethernet-based modem, not a USB one.
USB DSL modems have varying levels of support in Mac OS X ranging from poor to none. The fact that 2Wire doesn't include Mac OS X instructions implies that this model is at the lower end of that scale.
By comparison, an ethernet-based modem will connect to your Mac via ethernet, have the option of sharing the connection with multiple machines, typically be faster, and has an almost 100% compatibility rate.

The MOF Compiler could not connect with the WMI server

I am trying to add node2 to SQL cluster (2008) However, I kept running into errors with the following error message:
"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI Server to start".
I checked on the WMI services, they are started and running.renamed the WMI repository. but nothing worked .
Any idea what settings I need to change in order to ensure a successful instalation and add node 2 to sql cluster.

Hi,
Did SQL Server failed during installation and you somehow brought services online. Or it failed and next time you executed it succeeded IMO this error pops up because of remnants of failed installation on Node 1. With cluster specially if Installation on
node 1 fails you should uninstall completely and remove all files related to SQL Server and then proceed.
Have a look at below connect,see workaround and information posted by MS
https://connect.microsoft.com/SQLServer/feedback/details/356258/the-mof-compiler-could-not-connect-with-the-wmi-server
If above still not helps please post complete setup log file
%Program files%\Microsoft sql server\100\Setup bootstrap\Log\ folder.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Online connection required to enter the shop,conne...

hello ,
i have nokia 6220c
Software: 5.15
and i just got my last version of ovi maps and its working very good ..
but the problem is when i use the ( Drive to ) option, it only work for 10 seconds then this massage appear : "online connection required to enter the shop,connect now?"
if i press No , it take me back to the map with canceling the dirictions .. and if i press Yes , it take all my criedts and show only loading.. ,
i thought that service is free ,,but i payed alot on criedts for nothing ..
can anyone help me ??
Solved!
Go to Solution.

@ahmad5155
As your 6220 Classic can only use Nokia_Maps_3.01_09wk44_b01_s60_3.2_lm_rom.sis you would need to purchase a voice navigation license which is why you are prompted to visit "Shop";http://europe.nokia.com/support/product-support/maps-support/pricing-and-coverage/maps30
Happy to have helped forum with a Support Ratio = 42.5

German T-Online Connection with Bordermanager

Similar Messages

Maybe you are looking for