Get a blank page when I log in to my WRT54G router's setup page

When I try to log in to my router's setup page, I get a blank screen. My router's address is 192.168.1.1, and when I type that in to my browser's address bar, I do get the log-in prompt. I enter the correct password (leaving the user name field blank), and I get a blank screen. The ensuing page does not show me the various setup parameters.
I have 2 PCs and have encountered the problem in both. On one, I am running Windows 7 and the other is running Vista. I recently upgraded my WinXP machine to Win7 and I did not have the problem on XP.
Can you please help?
Thanks
J

To view the router's web pages:
You do not need an Internet connection. The router's "web pages" are built into the router.
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
Point your browser to 192.168.1.1 , then login to your router. Your user name should be left blank. Your password is "admin" (with no quotes), unless you changed it.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
Some Zone Alarm users have reported that adding 192.168.1.1 to their list of "trusted" addresses fixed the problem. This trick might also work with other firewalls.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model number of your modem (not the router).
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If you still have trouble, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

Similar Messages

Why do I get a blank screen when I log in to ExportPDF?

When I access Export PDF through this link, I get a blank screen with only the option to cancel. Is there another link I should be using? https://cloud.acrobat.com/exportpdf

Hi export pdf,
That is indeed the correct link. Please clear your browser cache and try again. Or, try a dfferent web browser (see System requirements | Acrobat.com for a list of compatible web browsers.)
Best,
Sara

I want to reinstall our Adobe Acrobat XI Pro because we have begun to get error messages. I followed the initial instructions but when I logged in I couldn't find "My Orders" page which is required to locate my order and install. Any ideas?

I want to reinstall our Adobe Acrobat XI Pro because we have begun to get error messages. I followed the initial instructions but when I logged in I couldn't find "My Orders" page which is required to locate my order and install. Any ideas?

Barbara,
If you are looking for your serial number, sign in to your Adobe account. On the Manage Accounts page that appears, all of your registered products and their serial numbers are listed in the Plans & Products section. For more information on locating serial numbers,please see Find a serial number
Here is the link to download and install the software:
Acrobat XI, X
Pattie

I'm getting a blank screen when trying to connect to my App Store.how can I fix this ?

I'm getting a blank screen when trying to connect to my App Store.how can I fix this?

I got this error after upgrading to new version. After searching these pages for an answer and not finding a usable one, I simply quit and re-opened iTunes, and... voila! Problem solved!

I had to erase my hard drive and then reinstall everything back from my passport external hard drive. Now my iPhoto edit is not working. I get a blank screen when I want to edit. The photos show up in the library but I cannot edit them. Help?

I had to erase my hard drive and then reinstall everything back from my passport external hard drive. Now my iPhoto edit is not working. I get a blank screen when I want to edit. The photos show up in the library but I cannot edit them. Help?

There are several possible causes for the Black Screen issue
*1. Permissions in the Library* : Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
*2. Minor Database corruption*: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
*3. A Damaged Photo*: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
*4. A corrupted iPhoto Cache*: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
*5. A corrupted preference file*: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Regards
TD

My email isn't working on my ipad I just get a blank screen when I tap on mail

My e-mail isn't working on my iPad2 I just get a blank screen when I tap the mail icon. I had e-mail for the first 2 days I had my iPad then it disappeared I don't know what happened.

try to quit the mail application in the multitasking feature. if this does not work try to reset the device manualy by pressing the home and power button until it powers off and restarts with the apple logo.

HT204088 I get a blank screen when I click on iTunes app on my ipad2

I get a blank screen when I click on iTunes app on my iPad how can I rectify?

SOLVED! I also received "Loading" message when I clicked on Apps store.
Go to Settings, General - ensure Restrictions are Enabled.
Also in settings, General Reset Network Settings.
You you then see Apple logo for a few moments.
Go to Settings, turn on wifi (you will need you network pass code)

In pages, when a create a document, potions of it, say several pages will be clumped together and it effects me editing their order. It is like they are forever joined- How do I edit my document and print just one page or move just one page?

In pages, when a create a document, potions of it, say several pages will be clumped together and it effects me editing their order. It is like they are forever joined- How do I edit my document and print just one page or move just one page?

May you open your eyes before creating a new thread ?
Your question was already asked and answered today.
https://discussions.apple.com/thread/3177074?tstart=0
Yvan KOENIG (VALLAURIS, France) jeudi 14 juillet 2011 14:40:40
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please :
Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Can't access my router's setup page (wrt54g)

I can't access my router's setup page (wrt54g) after setting it up. The router is working fine, but everytime I try to log on at 192.168.1.1 it says the password is incorrect. The first time I set it up I changed the default user name and password and I thought I had just forgot it, so I reset the device. This time I didn't change any of the defaults and I still can't log on. I already had to reset it several times, and it's just annoying. Does anyone knows how to keep it from happening? I thought it could be a firmware problem, but I can't find any downloads for my route'rs version (V8). I'm using a macbook pro, osx 10.9.2.
Solved!
Go to Solution.

I had the same problem.. After trying the userid and password from my previous WRT54G2 without success and admin admin multiple times, I used the "router name" ==> Linksys as the user name and the security code that I used to set up the new router as the password and it let me in.. I was on the phone with LINKSYS technical suport during this 1 hour process and they were as much surprised as I was that this worked.. After gettin on and changing the config, (thanks to Honey), I was able to access the internet from the new E2500 THAT i HAD JUST INSTALLED.. success

Can't login to the router's setup page

I setup my brother’s Linksys WRT54G router using NetSet, should I still be able to get into the router's setup page by typing in 192.168.1.1? I haven’t been able to.
Ronnie

I just upgraded to Internet Explorer to IE 7 and the smart application started blocking the access to the http://192.168.1.1. address.
I had enabled the https option in my router and by I using the https://192.168.1.1 URL IE7 complained about how insecure was to access that site but it let me go in.
If you did not enabled the https option in your router, you may try to use some other browser not so protective of the user.
Regards,
Hector

Pdf in Safari: Get a blank screen when I click on a PDF

[Inventory]
Safari 5.0.5
Acrobat Pro 9.4.4 up-to-date
Acrobat Reader 10.0.3 up-to-date
iOS 10.6.7
[Problem]
When I surf the internet using the Safari browser And I click on a link that is a PDF, I get a blank screen. The PDF does not render in the new Safari window. What happened?

Hay there
I JUST FIXED THIS PROBLEM ON MY OWN COMPUTER
--YIPPEE--
I hope that this will help all those safari user that have been resisting the urge to put a fist through the screen like i was.
1) there is a hidden 'library' folder in the "home" (looks like the little house) account -- you have to unhide it and make your change there
2) i found it by doing a search for "pdf plugin" in the search area (by that litte mignifying glass icon thing)
3) here is the path. home/library/internet plugins/
4) once you are in this folder you have to swap out all the old crap that's there for the new/updated stuff
this is were you made sure your plugin are correct
HINT: i copied all the pdf related plugins from the other "library" (the ones that were recent installs) into this one
I then restarted safari and it was cool beans

I am trying to log on to "Give us this day" to which I subscribe and I only get a gray screen when I log on to the site.

If I'm being blocked by mozilla firefox from accessing this site. How do I turn off the block?

Here's the general advice first:
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page and logging in again. Does that help?

I created an administrator pseudo profile and made my profile standard. but when i restarted there another profile in my log-in page. when i log in to that unknown profile i cannot log-in. what is that profile and how can i delete it? thanks

i have a rmbp 15" osx.. my case is this: i created an administrator pseudo profile and made my profile standard. wel i read from another forum, to strengthen my malware security.. but when i restarted there's another profile in my log-in page stating "needs updating". when i log in to that unknown profile i cannot log-in. what is that profile and how can i delete it? thanks

Resetting User Account Password (10.7 +)
1) Boot into your Recovery Partition holding down command + R at the startup chime
2) Select 'Terminal' from your Utilities Menu Bar
3) Type the following bolded command in: resetpassword
4) From the window that appears, select your boot volume and the appropriate user account
5) Type in the new password and confirm the new password
6) Click Save, close this pane and quit Utilities
7) Select your boot volume when presented with choose startup disk and reboot your machine

Mountain lion, Get a blank screen when wake up.

The problem started when i connect my Dell U2711
to flash 5870's displayport
The system works fine . When my pro sleep i can't wake display up.
(Get only blank screen). But system wake up fine
(i can use screen sharing to control my pro)
The problem gone when i connect To 5870's DVI port.
I started found this problem after installing mountain lion,
Doesn't found the problem with 10.7, 10.6
Help me please!

I had this problem last evening also. Tried soft and hard reset. No change. The last video I had been watching on the plane I had paused and sworn to iPod to play some music. I later tuned the iPad off and put it away. When I later tried to resume the movie at my Hotel all I got was a blank screen...every time. What I just did to get the problem resolved was to go to iPod controls panel played the paused song and then closed the iPod app. Then went to Videos and now the video came back where I had paused it. Tapped Done in the top left corner and now I have all my videos back for access. This must definitely be a bug between playing videos and playing music. I had never paused a movie and listened to music before.....should work for you.

I am getting an unknown error when trying to download a word document from mail to pages, any help

I am trying to download a word document from mail into pages and I keep getting an unknown error message, are there special settings for this? Any help much appreciated!

Not there aren't any special settings for this. You just use the Open In feature to save the document into Pages. You could have a font in the document that Pages doesn't like, maybe something that you copied and pasted from somewhere into the document that went corrupt. But there is nothing special about the way that you save a Word document into Pages. You save it like you save any document or file into a compatible app.

Get a blank page when I log in to my WRT54G router's setup page

Similar Messages

Maybe you are looking for