Get a license connectivity E_stream_error when trying to connect to a vendor site for a purchased book
I can download and open an .epub from Adobe into my ADE v. 3 with no problems. But when I try to link to a vendor site where I bought a book I get the downloaded .acsm file but that can't then be used to connect to the vendor to obtain the book. It gives me the above error message.....I have no problem with this at home; only at work.
I'm convinced there is some type of connectivity issue but according to my IT folks it should work.........but it doesn't.
thanks
Pete
Hello,
Did you created the SQL login the ASP is using for the connection on the new SQL Server instance? Does the new SQL Server instance is configure to allow Mixed Authentication
or just configure to allow Windows Authentication? Change it to Mixed Mode.
Please configure Windows Firewall on computers to allow SQL Server access or disable it.
http://technet.microsoft.com/en-us/library/cc646023(v=sql.105).aspx
Enable SQL Server Browser service and enable protocols TCP/IP and Named Pipes on the SQL Server instance using the following resource:
http://technet.microsoft.com/en-us/library/ms191294(v=sql.105).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Similar Messages
-
I get an Invalid Certificate notice when I try to access my https site for my printer. The serial number is the same as used by another certificate. In IE I was able to proceed to this address, but Firefox won't give me that option
Hello,
Thanks for contacting Mozilla Support!
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you. -
Why do I get "Select Input Method" dialog when trying to open tabs on some sites?
This is what I'm experiencing with Firefox mobile on an Android tablet.
On some sites, when I click a button which should open a new tab, I get the "Select Input Method" dialog box. First, I don't know why this dialog is popping up. Second, it is an empty dialog; there is nothing to select, only a heading that says "Select Input Method". When I touch the heading, I get another "Select Input Method" dialog, this time with "Android Keyboard" as the sole item to be selected. It is already selected. Touching it or backing up to dismiss it leaves me on the page I started on. Touching the original button which should open a new tab simply repeats the entire dialog sequence. Backing up from the original, empty dialog, does the same thing.
Once or twice, by magic or something, I was able to get the page to open the new tab. But I cannot confirm what sequence of selecting or backing up out of the dialogs may have led to the correct behavior.
Any help would be appreciated.kbrosnan,
Thanks for the reply. Sorry it took so long to get back to you.
My wife is working on a project so I'm a little light on details. Apparently she figured out that her Javascript is calling ShowModalDialog and this was what was causing the Select Input Method dialog to open. I don't fully understand the details but she's looking for a different way to do this. I believe she said she subsequently found out that the Firefiox mobile browser doesn't support ShowModalDialog.
She's new to mobile web development (and I know nothing about it) so she's kind of feeling her way. If you have a good resource for how the FF Android mobile browser differs from the normal desktop browser, that wouldbe a big help, I think. Otherwise, thanks for you reply and she'll keep plugging away discovering what she needs to change in her program to make it work for mobile.
Thanks. -
why do i keep getting this message when trying to view a movie: The shared library “iCloud Purchases” is not accepting connections at this time. Please try again later.
Same issue. What are they doing?
Macbook Pro Retina Yosemite 10.10.2 -
I get error message "unknown error" When trying to log on to itunes via pc, help please!
I get error message "unknown error" When trying to log on to itunes via pc, help please!
Hello, trolle56.
Thank you for the question. You may find these articles helpful in troubleshooting the error received with the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Cheers,
Jason H. -
I am getting a 3014 error message when trying to recover my iTouch after upgrading to 10.7.0.21. Everything worked fine until the upgrade.My PC is current with upgrades, I have unplugged all USB connections and I have disabled my firewall security.
Did you try this:
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.
Also see:
HT4061 error message 3014.: Apple Support Communities -
KEEP GETTING "Unsupported 16-Bit Application" when trying to download Blackberry Link. Im trying to sync music into my new Z10. here is the whole error message:
"\??\C:\User.....................cannot start or run due to incompatibity with 64-bit versions of Windows. Please contact software vendor to ask if a 64-bit Windows comapatible version is available
Any know how to transfer music without using this Blackberry link? Is there a quick fix to my problem? Any help would be appreciated. ThanksJust download the Link application directly to your PC, not with your BlackBerry connected.
There's no need for the connection while your simply downloading the install file.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Getting an error 1 message when trying to restore iPad. Any suggestions?
Getting an error 1 message when trying to restore iPad 2. Any suggestions?
I too am getting the same error message. Along with "We Could not complete your itunes store request. The network connection was refused make sure your network settings are connected and your network connection is active"....im posting on this forum so how is my network not connected?
I am using the OSX Mountain Lion 10.8.3 on an iMac -
I'm getting an error code 9 when trying to restore apple tv 2 thru iTunes any suggestions?
I'm getting an error code 9 when trying to restore apple tv 2 thru iTunes any suggestions? the error comes up when itunes tries to verify the update. I hook the apple tv back to tv and says I need to connect to itunes. the original problem was the power went out and the apple tv light kept blinking. I tried restarting it but would not work. Any Suggetstions? Thank you.
Try again tomorrow. All Apple servers are undergoing a huge number of hits. I think tomorrow or even the next day, all upgrade and activation servers will be in better shape.
Any time millions of people want to do exactly the same thing online, there's always trouble, LOL. -
I am getting error code 150:30 when trying to open "edit" in PSE 8??
I am getting error code 150:30 when trying to open "edit" in PSE 8??
http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html
-
Getting "line disconnected" error message when trying to monitor
Getting "line disconnected" error message when trying to monitor "live stream" on cameras from computer. Anyone else have this issue? Any suggestions on how to fix? I have reconfigured each camera with the router but still having the error message. I have a total of three cameras....(1) is wired and (2) are wifi......I am getting this message with all cameras (both wired/wifi).
Is this an intermittent error that you get now and then, or were you able to successfully setup your cameras, then one day you got the "line disconnected" on all cameras since that point and on?
If this is an intermittent problem, I can share that I experienced the same thing the first two days of having setup my cameras. It seemed that my Gateway was communicating with the Verizon servers pretty heavily as I was getting my HMC first setup. However, starting on day three and on, it has worked very well.
The only odd thing I'm experiencing now is that I getting several "camera_detected" messages in the activity logs. All my cameras show up in the My Devices list, and I can view them either as a snapshot or as live streaming, however, the log makes it seem that there is a mystery camera connected somewhere that I don't know about. I have a call in to Verizon regarding this and hopefully will get an answer in the next couple of days. It's not hurting anything, just kind of annoying to sort through those entries as you're going through your Activity Log. -
I'm getting an error code (A12E1) when trying to install Creative Cloud for photographers. Agraphers
I'm getting error code A12E1 when trying to install the Creative Cloud app for photographers. Can anyone help me get installed?
Hi Redrock,
Could you try the solutions described here:
http://helpx.adobe.com/creative-cloud/kb/a12e1-error-downloading-creative-cloud.html
Thanks,
-Dave B -
Just recently I am getting the following error message when trying to access web sites. I am using Firefox browser version 10.0.2. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" as the web site page is being displayed in browser winder. Then I have to click ok. It doesn't matter what web link/site I go to it happens. It is an issue with some plug-in?
I have advised McAfee's product team of the problem and this thread, and they're looking into it now.
-
Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive. "Could not complete backup to media share. The network backup disk does not support the required AFP features." What are AFP features and how do I get Time Machine to backup to my current external backup?
This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).
-
I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
Thanks for your help in advance....Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks!
Maybe you are looking for
-
How can I download free apps from the App Store without a credit card?
I'm trying to make an account so that I can download free apps but there is no option where I can select no credit card.
-
Hi everybody, I need to stop a shutoff browser process before close it (like when we shutdown the Operatin System and there is a modified document opened). Is there anything like this? Thanks, Maur�cio S. Mudrik IT Director Intercomax - Your Office i
-
How do I create a collectio from developed images in the develop module of Lightroom 5?
How do I create a collestion of developped and modified images in the develop module of Lightroom 5
-
Configuring the Catalyst 6500 Switch for IPS Inline Operation of the IDSM
I understand how to configure the Catalyst 6500 switch so that the monitoring ports are access ports in two separate VLAN's for inline operation. However, I don't see any documentation that describes how the desired VLAN traffic gets forced through t
-
when i create a sales bom, all the components display as independent items on the picklist. why? and it also does not display the parent item. the picker needs to see this information! how can i make that show up on the picklist? any ideas?