Get a Report crashed error while running report using the mode character
Hello,
I'am getting an "Enable to run report - Report as crashde" issue only when I'am running reports using the mode character. The same report with desformat pdf never has any problems. I have changed the englife (set to one) increase the cachesize but I still have the same issue.
I'm using report 6i and Oracle 8i.
Thanks in advance for your help.
Regards,
Laurent.
Hi Thanks for the response,
In fact the report in character mode is working fine in my environnement but is not working on my customer environnement (which is supposed to be the same as mine). I was thinking of cache size issue or something like this ?
Regards,
Laurent.
Similar Messages
-
Timeout error while running Report
Hi
All,
Windows 2000
Oracle Report builder 10g
Oracle developer suite 10g
when I had OLD computer i was able to run report more than 10 minutes. Now, I got NEW computer and i am getting TIMEOUT error while running report more than 10 minutes.
Any clue?
Thanks,
VishalAs Fs says it depends on how you're running the report.
If you're running via a server then you need to make the change on that server or amend the URL you are using to run the report to add the enginereponsetimeout parameter.
You can amend this parameter on the server either by using the Application Server Control as I described in my last post or by directly editing the config file. This file will be called <reportservername>.conf and can be found in the oracle_home/reports/conf directory.
In this file look for the engine tag and see if the engineResponseTimeOut property is set.
E.g:
<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="4" minEngine="1" engLife="50" maxIdle="20" callbackTimeOut="90000" engineResponseTimeOut="5">
</engine>
This value is in minutes so increase to a time larger than that it takes to run the report.
If instead you're running the report via Report Builder on your own PC then look for a file called rwbuilder.conf in the same location on your PC and make the same change as described above.
If this property isn't in the file then the engine isn't supposed to time out at all so the problem may well be something different. But to discount it try setting to a large value like 30. -
Error while running report 10g
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(1000);
rep_status VARCHAR2(2000);
BEGIN
repid := find_report_object('REPORT2');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
set_report_object_property(repid, report_comm_mode, 1);
set_report_object_property(repid, report_destype, cache);
set_report_object_property(repid, report_desformat, 'PDF');
set_report_object_property(repid, report_server, 'myserver');
v_rep := run_report_object(repid);
rep_status := report_object_status(v_rep);
WHILE rep_status IN ('RUNNING', 'OPENING_REPORT', 'ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
message(rep_status);
IF rep_status = 'FINISHED'
THEN
web.show_document('http://localhost:8889/reports/rwservlet/showjobid' || substr(v_rep, instr(v_rep, '_', -1) + 1)
|| '?server = myserver');
ELSE
message('error while running reports-object ' || error_text);
message(' ');
clear_message;
END IF;
EXCEPTION
WHEN OTHERS THEN
message('error while running reports-object' || error_text );
END;
I have been trying the whole 5 days running this report but it is giving me error, i am making simple report which select all data and display from emp table, please help. Error I am getting is unable to run the report and Terminated_Report.Hi,
Check this link...How to call a report in Forms 10g ?
Hope this works...
Hamid -
I keep getting "Icloud encountered an error while trying to contact the server "
I keep getting "Icloud encountered an error while trying to contact the server"
Your Mac must be on Lion (10.7) to run iCloud. Apple had to change the operating system to fully support it. Nevertheless, it is possible to get emails from iCloud without having Lion. Please tell me if this interests you.
Anyways, here is the link to buy Lion (30 dollars, totally worth the upgrade ): http://itunes.apple.com/be/app/os-x-lion/id444303913?mt=12
Franklin -
Getting Error while running Report on Enterprise Report console
Hi all,
I am using Report builder 6i, I have developed one report and configued it on Enterprise Reporting tool but when tried to run it through Enterprise Reporting Console I got the following error
REP-0177: Error while running in remote serverREP-0736: There exist uncompiled program unit(s).REP-1247: Report contains uncompiled PL/SQL. FAIL 1
although the report is running fine through the report builder.
any thoughts?
Thanks in advance
Manvar
Message was edited by:
[email protected]Hello,
Do you reproduce the error if you implment the example provided in the document :
Oracle Application Server 10G -Integrating Oracle Reports in Oracle Forms Services applications:
http://www.oracle.com/wocportal/page/wocprod/ver-31/ocom/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
Regards -
FRM-92101 error while running report from a button or menu
Hi All,
I am getting the error FRM-92101 while running report without parameter from a button or menu. I am using Developer Suit 10g. I get the error as it shows there has some configuration problem in my form. Will you please help me anyone how can i solve the problem. My previous forms running very well both with parameter and without parameter.
ArifHello Sir,
Thanks for your cooperation. I have solved my problem by myself. The fact was that, when i tried with the following code which made my report---
SELECT br.bid, br.bname, br.branchtxnstatus, dif.difference
FROM branch br,
(SELECT gladbrid branchid,
SUM
(CASE
WHEN ga.gl_acc_categry IN ('L', 'I')
THEN gd.gladbalance
ELSE -1 * gd.gladbalance
END
) AS difference
FROM glaccount ga, glaccountdetail gd
WHERE ga.glid = gd.gladglid
GROUP BY gladbrid) dif
WHERE dif.branchid = br.bid AND br.branchtxnstatus = :Br_Status
and dif.difference!=0
ORDER BY br.bid;
and the code against the button or menu item is---
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('ASSET');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://192.168.0.21:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
Clear_message;
END;
Clear_message;
which has shown the error FRM-92101 and didn't run the report.
In that case I have changed the query to run the report. first of all i create a view following the query and build the report using a simple select query. that's etc. my report running fine now.
It is mentioned that there had no error on my codes.
Arif -
Error while running report..
Hi, We use 9iAS on linux and while running one report , we get this error:
REP-0177: Error while running in remote server
REP-300: date format is too long for internal buffer
(sign(decode( ==> trunc(imp.tnr_matu_date),
When i run the same report on my system (WINDOWS) it runs fine..Even on my dev UNIX box , it runs without any problem..Could somebody help me out?Thanks..Hi
Check that eul user discoverer user has the select right to the data table(s).
Ott Karesz
http://www.trendo-kft.hu -
FRM-92101 error while running report from form
HI All,
I am getting the form error FRM-92101 while running report from form menu.My code is given below:
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('REPORT47');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('http://192.168.0.21:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
Clear_message;
END;
Clear_message;
--Arifhi Arif
Please see this note on MOS/Metalink for some common causes of this error:
Known Causes of FRM-92101 Error In Forms [ID 604633.1]
thanks,
AMN -
Dataset can not be open error while running report rtcctool
Hello Experts,
While running report rtcctool we are gettin following dumps the says
ABAP runtime errors DATASET_CANT_OPEN
Occurred on 05/27/2011 at 10:00:52
Unable to open file "/usr/sap/B**/DVEBMGS00/sec/SAP_AGS_OLCNT_VERIFY.pse".
I am aware that the eror is happening because of this file but not sure from where to get this file. Please let me know any of you aware about this.
Regards
YogeshHi all.
I have the same problem and explore all possible solutions found in this discussion and others without satisfactory result.
Everything points that may be an inconsistency error external certificate which is in the DB. Anyone know how to fix this.
Greetings. -
ERROR WHILE RUNNING REPORT THROUGH FORMS.....!
hi all,
ive designed one form in Forms 9i...I'm tryin to run report through a Push button .....report is running well in paper layout through report builder 9i...The problem I'm facing is dat when i pressed button it is giving me error initially as FRM-41214 cannot run report and after that FRM-40735 When button pressed unhandled exception ora-06502.....What could go wrong??... Ive started OC4J instance ....created report object in object nevigator as well and defined basic properties for diff.parameters HTMLCSS,CACHE..etc.,mentioned report path in complete i.e.c:\reports\genbill.rdf ...Can anybody help me out ??? Thnx.!
-----------------------CODE ON BUTTON----------------------------------
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('REPORT5');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('<HOSTNAME>:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=myrepserver','_blank');
ELSE
message('Error when running report');
END IF;
PAUSE;
END;When a report terminates with an error, REPORT_OBJECT_STATUS returns the value "TERMINATED_WITH_ERROR", which is 21 bytes of data, but rep_status is defined as 20 bytes. The 6502 error is due to the data not fitting the variable.
I recommend wrapping the REPORT_OBJECT_STATUS function with a SUBSTR that limits the data returned to 20 bytes, which will ensure the results fit.
For example:
rep_status := SUBSTR(REPORT_OBJECT_STATUS(v_rep), 1, 20); -
Help me to fix the error while running DBMaintain Against the Database Schema in ASE.
Hi All,
I am trying to install sybase mobiliser platform 5.1 SP 03.I am referring the following guide
http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01871.0513/pdf/Mobiliser_Platform_Installation_Guide_5.1…
Now I have configured the ASE database server with default settings and now it is running fine.
Now my concerns are as follows:
1) I have executed the database schema (mobr5): 001_MONEY_drop_and_create_user.DDL with the help of linux command
isql -Usa -SASE1 -Phello@123 -i/opt/sybase/db/sql/001_MONEY_drop_and_create_user.DDL -o/opt/sybase/ASE-15_0/install/ASE1.log
How do I check the created database schema and user with default name 'mobr5'?
2) While running DBMaintain Against the Database Schema, I have followed the steps mentioned in the guide and made the following changes in the file dbmaintain.properties.ase
database.driverClassName=com.sybase.jdbc4.jdbc.SybDriver
database.url=jdbc:sybase:Tds:ASE1:5000/mobr5
database.userName=mobr5
database.schemaNames=mobr5
database.password=paybox
#Must be set if the driver is not packaged inside the scriptarchive or is present on the classpath
#e.g. /path/to/driver.jar
#database.driverLocation=/path/to/jconnect.jar
database.driverLocation=/opt/sybase/db/sql/com.sybase365.mobiliser.vanilla.standalone-5.1.3.RELEASE-scriptarchive-ase.jar
database.driverLocation=/opt/sybase/db/sql/com.sybase365.mobiliser.vanilla.standalone-5.1.3.RELEASE-scriptarchive-ase-vanilla.jar
When I execute the script archives ,
java –jar /opt/sybase/db/sql/com.sybase365.mobiliser.vanilla.standalone-5.1.3.RELEASE-scriptarchive-ase-driverless.jar -c /opt/sybase/db/sql/dbmaintain.properties.ase
java –jar com.sybase365.mobiliser.vanilla.standalone-5.1.3.RELEASE-scriptarchive-ase-vanilla-driverless.jar -c dbmaintain.properties.ase
I get the following error:
So please help me to resolve the issues.Hi All,
Issue is resolved and database has been updated successfully..
Error was in database .url field of dbmaintain.properties.ase file.
I have changed the database.url field from database.url=jdbc:sybase:Tds:ASE1:5000/mobr5
to database.url=jdbc:sybase:Tds:<Private IP of Linux instance>:5000/mobr5
Note:- I am installing mobiliser platform on AWS cloud.So I have made use of Private IP address of AWS Linux instance. -
REP-56048 Error while running report
Hi,
While generating output to excel file the report crashed with the following error.
REP-56048: Engine rwEng-0 crashed, job Id: 1081
It however executes fine with PDF. Please suggest a solution.
Report Server Version: (10.1.2.0.2)
Thanks and Regards
Babar BaigTo prevent the error:
REP-1247: Report contains uncompiled PL/SQL
recompile the rdf file on the staging application server. use the following command to recompile it.
rwconverter.sh userid=scott/tiger@test source=sample.rdf batch=yes dtype=rdffile stype=rdffile overwrite=yes
This will takes the source rdf file and recompile it to an rdf file of same format as the operating system of the app server.
For example, if I use reports builder on windows pc to create the rdf file and then move it to a unix box that is hosting the app server. Some reports will get this error for the first time they are run. The subsequent times, they might not get the same error. The above given syntax will prevent this from happening.
I have tried it in my production env and it works like a charm. If you need further help, email me at [email protected] -
Getting zero-sized reply error when running report from SQL query
Hi,
I have a Report from SQL Query in Portal. When I select Excel in Output Format and then run the report, it works properly, but when I select HTML in Output Format, the report works if the rows returned are not so many (I've been able to display the report for up to 701 rows), but when I try selecting a value from the LOV that selects many rows, I get the following error:
ERROR
The requested URL could not be retrieved
While trying to retrieve the URL: <data suppressed>
The following error was encountered:
Zero Sized Reply
Squid did not receive any data for this request.
Any ideas on how to fix this? Why does the number of rows returned affect the report this way?
Thanks,
LorenaProblem comes when any of the filter is applied in any one of the cases selected from the GUI.Do you mean that the problems only shows when you run the report in your browser via 9iAS?
Which version are you using?
Can you post the before report trigger? -
Error while running report in oracle apps
While running the report in oracle apps, i am getting below error
Arguments
AS_ON_DATE='2013/03/21 00:00:00'
sdate='2012/04/01 00:00:00'
edate='2013/03/31 00:00:00'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
Enter Password:
REP-0004: Warning: Unable to open user preference file.
REP-0300: ORACLE error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-300: ORACLE error occurred.
I tried to run the same report in report builder, it is working as per the requirement. But it is not working in oracle apps.
Please help.
Thanks in advance.Thanks Kishore. I copied the prefs.ora file. So the first warning from the is resolved. But still i am getting error.
Query: I am trying to get the total absence days for each employee in current financial year.
SUM((CASE
WHEN ( (TO_CHAR (TO_DATE (paa.date_start, 'RRRR/MM/DD HH24:MI:SS'),'DD-MON-RRRR') BETWEEN TO_CHAR (TO_DATE (:sdate, 'RRRR/MM/DD HH24:MI:SS'),'DD-MON-RRRR') AND TO_CHAR (TO_DATE (:edate, 'RRRR/MM/DD HH24:MI:SS'),'DD-MON-RRRR'))
OR (TO_CHAR (TO_DATE (paa.date_end, 'RRRR/MM/DD HH24:MI:SS'),'DD-MON-RRRR') BETWEEN TO_CHAR (TO_DATE (:sdate, 'RRRR/MM/DD HH24:MI:SS'),'DD-MON-RRRR') AND TO_CHAR (TO_DATE (:edate, 'RRRR/MM/DD HH24:MI:SS'),'DD-MON-RRRR')))
THEN
(CASE
when (GREATEST(paa.date_end,to_date(:edate,'dd-mon-yyyy')))= to_date(paa.date_end)
THEN to_date(:edate,'dd-mon-yyyy')
ELSE
TO_DATE(paa.date_end,'DD-MON-YYYY')
END)
- (CASE
when(LEAST(paa.DATE_START,to_date(:sdate,'dd-mon-yyyy')))= to_date(paa.date_start)
THEN to_date(:sdate,'dd-mon-yyyy')
ELSE
TO_DATE(paa.date_start,'DD-MON-YYYY')
END)
+ 1
ELSE
0
END)) AS "ABSENCE_DAYS"
sdate(financial year start date) and edate(financial year end date) are input parameters. In oracle apps parameters are defined as FND_STANDARD_DATE.
paa.date_start and paa.date_end is taken from per_absence_attendances table.
Error:
Arguments
as_on_date='2013/03/22 00:00:00'
sdate='2012/04/01 00:00:00'
edate='2013/03/31 00:00:00'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
Enter Password:
REP-0300: ORACLE error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-300: ORACLE error occurred.
Please help.
Edited by: 995343 on Mar 22, 2013 4:17 AM -
"Failed to open report" error while running reports
We have a web application develeoped in ASP.Net, SQL Server 2005 , Crystal Reports 10.0. Sometimes if a large number of users run reports from their individual nodes they receive an error "Failed to open report ", if we restart the IIS they are able to run the reports. In addition to this the users also sometimes get the error "Maximum Report limit attained". Can any one provide me with a solution other than restarting the IIS.
Hi Balla
If you face this issue only while running the reports from a .Net web application, then please post this thread to the sdk development forum.
You can follow the link below:
https://www.sdn.sap.com/irj/sdn/businessobjects-sdk-forums
Thanks
Maybe you are looking for
-
Not able to build osb jar using osb 10.3
Hi All, I am working on developing an osb jar from workspace(osb 10.3) using ant scripts.When i am trying to invoke an ant with target "export" it show an error "Java returned :13".I went through the entire post sent by respected people over the foru
-
My appletv will not connect to the internet
When i turn on the appletv I get a screen with two options, computers or settings. I know the internet is working for my computer and wifi in the same room. Any ideas out there?
-
Web Service and security....
Hi everyone, I wanted to know if someone suceeded to call a web service via a Java standalone class using a Deployable Proxy ? If yes, can someone gives me all the steps ? Thanks a lot for your help. NB : I succeeded calling a web service via Standal
-
I have a custom UIComponent that has a label as a child. I set the text of the label and I want it to autosize. I'm positioning the label in the updateDisplayList method, but I'm never touching the width or height. It seems to set these to 0, even th
-
Linking .swf file to Dreamweaver
Thank you soooooooo much it worked smoothly and the way I want . Cheers