Get an error in save.cpp at line 1477 during application build

The build failed running on a NT machine but worked on a 98 machine.

This error is not listed on the web. What version of LabVIEW are you using? Can you build any executable? What happens if you try to build on the 98 machine again? Is the VI working properly on the NT box? Are you using special hardware or software?
Reinstalling LabVIEW on the NT box is a good troubleshooting step.

Similar Messages

When I try to export the file in word, I get the error "The Save as command has not been able to develop this document. Unable to create file"

When I try to export the file in word, I get the error "The Save as command has not been able to develop this document. Unable to create file".
Win7 Pro, 64bit
Acrobat XI Pro, tryal

Create a one word pdf file. Try converting to word. If that fails, try a complete uninstall, run the cleaner tool, then re-install.
Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs

My app store will not open. when i try to open it i get an error that reads "You can't open the application App Store because it may be damaged or incomplete". How can I fix this?

my app store will not open. when i try to open it i get an error that reads "You can't open the application App Store because it may be damaged or incomplete". How can I fix this?

I am having the exact same problem. MacForums has been helping me, and I called Apple. After trying everyone's suggestions, and Apple's, no success.
My App Store app still says "incomplete or damaged." There is even a circle with a line through it on the icon. Apple said reinstall my Snow Leopard upgrade disc (not my original Leopard disc) and then run the Combo Update (like your suggestion). Did not work. I also updated the software from "Software Update". Rebooted.
I think this started after I replaced my hard drive with a SSD and moved the hard drive to where the DVD was. I wonder if the person above who had the same problem also installed a SSD?
Anyway, anymore ideas? Even Apple is stumped.
(In answer to the other post above, my Quicktime works fine.)
Message was edited by: mrivmriv
Just did some more reading. I was going by the icon in the dock. When I checked in Finder, there it was, fixed and brand new!! Thanks, anyway.
Message was edited by: mrivmriv

When trying to download QuickTimeInstaller.exe, I get an error message that it is not a Win32 application. Is there anyone that can help? Thank you.

While tring to download QuickTimeInstaller.exe, I get an error message that it is not a Win32 application. I do not know what that means. I am running Vista and Service Pack 2 is installed. I am trying to look at a math tutorial on CD that came with the textbook.
Thank you for any help or assistance.
Laura

It suggests the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/quicktime/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!, I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!

I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!, I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!

You probably need to either uninstall and reinstall itunes or to download the apple application support by itself
you can download the itunes http://www.apple.com/itunes/ here
then to do a complete uninstall / reinstall follow these instructions http://support.apple.com/kb/ht1923
you could also use 7zip to extract the individual installer for apple application support from the itunes setup file http://www.7-zip.org

TS2776 i am getting an error itunessetup.exe is not a valid win32 application. please help.

I have downloaded the itunes setup but i am unable to install it. I am getting an error itunessetup.exe is not a valid win32 application. I have a toshiba laptop with windows 7 starter pack. please advise me what to do. thanks.

That's a Windows PC issue. What is the Mac OS X Lion issue? In other words what are you posting in the Lion forums about?

After downloading software for 123Cheese Photobook (Australia), when I try to open the program, i get: "Initialization error... Could not create the application support directory 'Macintosh HD:Library:Application Support:123 Cheese:'. Please help.

After downloading software for 123Cheese Photobook (Australia), when I try to open the program, i get: "Initialization error... Could not create the application support directory 'Macintosh HD:Library:Application Support:123 Cheese:'. Please help. The MacBook Pro is one day old.
Thanks

Hi, Im am also having this same problem,same message, trying to make a photobook with a non-refundable voucher. my Macbook pro is like 2 months old and im up to date with all of my updates.
What ended up happening with this problem for you because, Ive emailed cheese123 3 times and they haven't replied???
Can you help me? Thanx

Error "cannot find terminal hotpoint in wire..." during application build.

Hello,
I'm trying to compile a TestStand 2.0.1 Custom LabVIEW Operator Interface with the LabVIEW 6.1 application builder. During the build process I get six(6) error prompts 'cannot find terminal hotpoint in wire...' and the builder stops and prompts another error that says the one of the VI's 'is not executable'. However, I can open the VI and there are no errors on it and no asterisk on the titlebar. There is only one strange thing I noticed in the VI Hierarchy browser, where for this VI and some others, it display an untitled (new) VI not connected to anything (!?) that does not appear in the block diagram. If you reopen the VI, the mysterious VI is gone.
The interesting thing is that I can successfully build the application if I try it with another Windows XP sp2 computer with the same exact LabVIEW and TestStand versions. Could anyone help me out here and let know what this error means. I can't find any reference to it here or in google. Thanks!

Thanks to Kevin in tech support for investigating these errors. I did find after much work one of the VI's that is causing the "terminal hotpoint in wire..." error. It's a GET EXE STRINGS.VI in the custom OI. I have screen shots of it, but I don't know how to load them here... Anyway, it appears to happen on this particular VI because it has more than 20 connector pain terminals, but not all of the connections appear to be setup in the connector pane. However, this does not prevent the VI or the calling VI (TestStand - Execution Display) from running normally or even displaying a broken arrow (Why Not?). I changed the VI and removed the unused connections and the problem seems to be gone. I still need to find one more VI that is doing this. I also don't know why my Laptop is able to build the OI application OK w/o errors and other PC's always stop the application builder because of these errors.
Any other insight on this issue is greatly appreciated. Thanks,
David A. Gaud

I get an error message "invalid character in line 1" when loading my ISP's webmail program

I've tried ALL possible solutions offered in the Firefox articles without success. No problem with any other web sites, just the web mail site offered by the ISP, which blames Firefox. However, I can load the web mail site in IE (don't want to, though). The web mail program first gives the error message then allows login information to be filled in, then starts initializing and gets to "90%" of initializing then freezes while the wheel goes round 'n' round. Any ideas?

In looking at the console (first time - I am a naive user, not an expert) I find that there is a 404 error appearing on the 6th line of puts and gets in the console. All subsequent lines are 404 file not found errors, until the computer hangs. Here is the reading of the 5th and 6th line:
16:01:02.248 PUT https://www.webmail.bellaliant.net/ajax/multiple [HTTP/1.1 200 OK 443ms]
16:01:03.366 GET https://www.webmail.bellaliant.net/ox6/v=OEU5Kkd/plugins/com.openwave.richmail.userguide/lang/en_US.po [HTTP/1.1 404 Not Found 32ms]
Now I have found a virus on scanning the computer with Bitdefender, and I believe the problem may be caused by malware attached to a script library. Bitdefender says it cannot clean the file. Here is the message from Bitdefender:
c:\users\Tim\AppData\Local\Temp\DI\ValidationSctiptLibrary.dll has been detected as infected. Bitdefneder could not clean this item. Your computer is not virus-free. Virus name:Gen:Variant.Adware.AdGazelle.1
Cor-el suggests cleaning the Firefox memory with "forget about this site" - will that remove the problem?

TS3074 When trying to install itunes on my windows 7 computer i get the error itunes setup is not a valid 32bit application. Any ideas to rectify please?

When ntrying to istall itunes on my windows 7 computer I get the error message pop-up "itunes setup is not a valid 32bit application" . Can anyone help please?

Let's try the following document with that one:
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

I tried downloading the new update for itunes I get these error messages: Visual C runtime library R6034 an application has made an attempt to load the C runtime library incorrectly Error 7 windows error 1114. What should I do to correct this?

I tried downloading the new update for my desktop PC I get the following error messages:
Visual C++ Runtime library
R6034
an application has made an attempt to load the C runtime library incorrectly Error 7 Windows Error 1114

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99907)

I have re-installed Adobe Reader on to my Windows 7 PC. When I open a PDF I was getting an error message containing . . . .Acrord32.exe application error . . . . I now cannot open any PDF's. Adobe seems to be unresponsive.

I have re-installed Adobe Reader on to my Windows 7 PC. When I open a PDF I was getting an error message containing . . . .Acrord32.exe
I now cannot open any PDF's and Adobe seems unresponsive. I have tried to follow a step by step guide on how to fix this but Adobe won't stay open long enough for me to complete the steps. When I open Adobe it stays open for a matter of seconds then minimises to the task bar and when I click on it again I can't do anything with it and have to close it via task manager
Please help!?

Disabling Protected Mode should fix the problem. But since you cannot even open Adobe Reader by itself, you need to do it via the Windows registry. If you tell me your installed Reader version, I can give you a registry script to do that.

Have updated to F.F.6 I am still getting this error evertime I use it. Message: [Javascript Application] TypeError: Components.classes[@softage.ru/skype/SkypeFfExtension;1'] is undefined - HELP

Every time I use F.F. I get this error. TypeError: Components.classes['@softage.ru/skype/SkypeFfExtension;1'] is undefined
Does anyone else get this and or know how to remove it?
Many thanks for your help and support

This issue is caused by the Skype extension for Firefox.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

ERROR for save a form created in XML Form Builder

Hello everyone:
I am having an error message when I try to save a form in the XML form builder and I donk know what I need to do for fix it.
Warning:
An error occurred when copying temporary files. The saved project state can be opened in the XML Form Builder, but the old state will be generated. The error was: An unexpected error occurred: null.
If anyone knows how to fix it I'll thanks your help!
Tzitzi

Hi, someone can help me with this?

When I open any web page I get this error message with Firefox 4...Javascript Application Uninstall Set

When I load web pages with Firefox 4, I get this error message
Javascript Application Uninstall Set

When I load web pages with Firefox 4, I get this error message
Javascript Application Uninstall Set

Get an error in save.cpp at line 1477 during application build

Similar Messages

Maybe you are looking for