Get an error when trying to add a new object!

Post Author: zhaodifan
CA Forum: Administration
I was trying to add a new object from central management console and I got the following error:
Retrieve Error
There was an error while retrieving data from the server: Failed to read data from report file C:\WINNT\Temp\pres_report.rpt. Reason: Operation not yet implemented. File C:\WINNT\TEMP\tmpreport\~ci226c521bf2923e0.rpt.
The report I am trying to add was running on a Linux box with the same version BusinessObjects Cyrstal 11 running. I want to move it to a Windows box... The report itself shouldn't have problems because it was running fine on the linux box...
Also want you let you know that I don't know too much about Crystal Report and our Crystal Report admin quited his job last week! I will be very appreciated if anybody can give me any advice. Thank you!
Difan

If this is a Gmail account you might need to unlock by going here: https://accounts.google.com/DisplayUnlockCaptcha.

Similar Messages

Get the following error when trying to add a new user - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

Get the following error when trying to add a new user on Mac OS Server 10.5 - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

How come Leopard let me use the WGM in standard mode?
While SA complains that it won't work in Standard Configuration, WGM does not. There is some fault in the logic of this for which I don't have an explanation.
If I want to get control on Dock, selection of Home folder, config of Proxy... which I think are basic things, do I really need the advanced mode?
If you wish to have complete control of all client settings, yes. There really is no disadvantage of using an Advanced configuration other than the learning curve.
So if I switch to advanced mode, there is good chance I won't get this error message anymore, right?
Yes.

I keep getting an error when trying to receive the new update iOS7 on iPhone5. Any suggestions?

I keep getting an error when trying to receive the new update iOS7 on iPhone5. Any suggestions?

Do the update using iTunes on your computer.
Plug your iPhone into iTunes (current version), let it sync, then click "Check for Updates" on the iPhone's summary page in iTunes.

I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before

I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before

Solution:
Open Disk Utility.
Select your external hard disk and run a “verify” on it. After a few minutes (depending on the size of your drive), you should be good to go. You don’t need to run a “repair” on it... (at least I didn’t have to). See photo for reference.
This should fix the permissions issue, because on my Mac running Mountain Lion I was unable to edit the permissions in the get info dialog window even after "unlocking" the drive.

I am getting an error when trying to add a caption.

I get the following error when trying to add a caption to a photo.   "An error occurred while reading files or writing files to disc. The disc may be full or there may be a problem with the source media."    I am running Windows 7 Pro.   The files are located on my c:.   The drive has 274 GB Free so space isn't an issue.   I have tried deleting a file and readding it to the same catalog and still the same problem.   I have copied the file to the desktop and cataloged it from there and the error went away.
If i check on the folder attibutes it is set to read-only but the desktop folder is as well.   If i try to remove the read only it only resets itelf to read only again.   Once i get the error another file shows up with the image name plus -edTM P-1 and it has the caption on it.

I was able to get it to work. The root folder which held the pictures had a lock on it through windows 7.   Even though the drive was shared, I still had to go into the folder properties and share it with everyone.   Once i got the lock off and rebooted I was able to add captions again.

CSM 4.1 Authorization error when trying to add a new device

                   Hi, i just finished installing a new CSM 4.1 and i set it up to use the local windows user accounts for its administration. So when i login to the CSM i use the same username/password as the one used to login to the underlying Windows OS.
                    When i am trying to add a new device in CSM i get an error saying that i do not have enough rights to do that. Any ideea why this happens?
Thanks,
     Costin

You seem a little grumpy. Yes, it has acurred to me that no one knows the solution. And no, I have not called tech support yet as I have been distracted lately and spending an hour on the phone trouble shooting is an hour I could be studying. Its much easier to "bump" this thread and hope someone with a suggest will chime in.
Anyway, please dont just tell me to delete something without giving me an idea of what Im deleting. I have a feeling that this login.keychain deletion will cause me to loose the information already stored. Is this the truth?

TS3297 I keep getting an error when trying to add songs to the iCloud. Error reads: "We could not complete your iTunes_Store request. An unknown error occurred (4002)" I have tried to completely delete iTunes and reinstall but still getting error.

I keep trying to download songs to ICloud but keep getting an error: "We could not complete your itunes_store request. An unknown error occurred(4002)"
I have deleted itunes and reinstalled but continue to get error. Want else can I do?

Thanks jdnjo. Your fix also worked in Windows 8!

Getting 'generic error' when trying to 'add media'

Working with a brand new Surface Pro 2. New user of Premier Elements 12. Cannot get 'Add Media' to work. Getting an error message of 'add media error - generic error'.
Media is on a Kodak Z981 with a file type of .MOV.
I am thinking that there is some simple error that is preventing me from 'adding media'.
What is it?

Welcome to the forum.
Do you have the latest version of Apple's QuickTime Player installed?
If one does not, that can cause a Generic Error, upon Import.
Good luck,
Hunt

Error when trying to add a new item in table

Hello I have this error when I want to insert a record in a table of the year 2010,
Warning: mysql_num_rows(): supplied argument is not a valid MySQL result resource in /home/content/r/e/l/reliefsale/html/php/reliefsale_functions.php on line 16
I have 3 more years 2009, 2008 and 2007, when I want to insert a new item in any of the other years, everything works fine but in 2010 any ideas??
Thanks

Hi there,
better post your question in the regular Dreamweaver Application Development forum where a wider group of users might be able to reflect on your issue and help you out. The current forum deals with questions which are related to the Dreamweaver extension ADDT, which generates non-standard PHP code code and has been discontinued over a year ago.
Cheers,
Günter

Error when trying to create a new object that begins with Z

Hi forum,
When I try to create a new BW object that begins with Z (infofuente, infoarea, component application), I skip the following error.
Namespace''is not a valid namespace BI
Message no. R7017
Diagnosis
Namespace''must be entered in both the BI RSNSPACE table and the basic table TRSNSPACE or the view V_TRNSPACE. You also have to enter the relevant generation namespace '& V2' in TRNSPACE table. This value is taken from table RSNSPACE.
Both namespaces must be set to 'Changeable' - providing they are not empty.
Response System
You can not edit or create an object in this namespace.
Procedure
Use a different name.
Or contacct your system administrator. He / she can switch to the namespaces' Changeable 'using SE06 transaction, or - if they do not already exist - enter them in the table above named using sm30 transaction.
If the namespace '& V1' is empty, then the problem is with the generation namespace '/ BIC /'.
Procedure for System Administration
I've been following steps said to me, and yet I still persisted error. I am probably missing something ... that may be?
A greeting,

Hi,
Try to create the objects again and take the screenshot of SU53 when you get the error and see the authorization object for which you are getting the error here.
It is possible that you dont have development authorization.
Also the issue could be that the system is not configured to create the objects begining with Z.
Check this with basis as well.
Thanks
Ajeet

OIM: Getting an error when trying to add entry into child table

Hi OIM Guru,
I have a process form and child table I am using for provisionng. Everthing was working so far, but suddenly I am getting the following error whenever I try to add an entry into the child table. I
Can someone tell me what might be going on here?
Thanks a lot
tcFormInstanceOperationsBean/addProcessFormChildData encounter some problems: maoErrors:Cannot schedule a task for child table change, schedule item save failed
tcFormInstanceOperationsBean/addProcessFormChildData encounter some problems: Cannot schedule a task for child table change, schedule item save failed
Thor.API.Exceptions.tcAPIException: Cannot schedule a task for child table change, schedule item save failed
at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.addProcessFormChildData(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.addProcessFormChildData(Unknown Source)
at com.thortech.xl.ejb.beans.tcFormInstanceOperationsSession.addProcessFormChildData(Unknown Source)
at com.thortech.xl.ejb.beans.tcFormInstanceOperations_2j82mm_EOImpl.addProcessFormChildData(tcFormInstanceOperations_2j82mm_EOImpl.java:1298)
at com.thortech.xl.ejb.beans.tcFormInstanceOperations_2j82mm_EOImpl_CBV.addProcessFormChildData(Unknown Source)
at Thor.API.Operations.tcFormInstanceOperationsClient.addProcessFormChildData(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)

Never mind. I got it figured out.
What happened is I changed my adapter that is being called and because of this change the task mappings in Process Definition got wiped out and I had to remap all the attributes again. It now works.
Whew!! It took me a while to figure this out.
Thanks

I get this error when trying to download my new CC apps: "Photoshop is a desktop app so you'll..."

Photoshop is a desktop app so you'll want to download it from your computer."
Uh, that's what I'm trying to do. Not a very helpful message.
How do I download?

Dgennetten please try completing the following steps:
Please locate and rename the C:\Program Files (x86)\Common Files\Adobe\OOBE folder to OOBE_OLD
Reinstall the Adobe Creative Cloud Application from https://creative.adobe.com/products/creative-cloud.
Dgennetten is there a specific case number which I should review in reference to the BUILD conference you attended? At the moment I am only using the information which is available within this discussion.

Ora 12154 error when trying to add a database to VS Server Explorer

Hi Everyone,
I get the Ora 12154 error when trying to add a database to VS Server Explorer.
How do I get around this problem.
The database service is running and I can connect to the database with pl/sql.
I can also tnsping the database and that is also ok.
Looks like a problem with the odp.net software.
I am running the 32 bit Oracle 11g on a Windows7 Home Premium 64 bit PC.
I am new to this stuff so please help me step by step.
Thanks.
Emad

Hi J. B.
I have a question related to this. After you told me about the //host:1521/database alias I tried it in a VB 2008 program and it worked and returned data. At least I know that it can be used in a VB program without issues. I just now need to be able to add a connection with the Server Explorer.
Anyway here is the VB coding I used. I'm new to this and still learning:
Imports Oracle.DataAccess.Client ' Visual Basic ODP.NET Oracle managed provider
Public Class Form1
' String to connect to the database.
Dim strConnectionString As String = _
"Data Source=//emad-pc:1521/emadeva;User ID=scott;Password=tiger;" '
' Associate the connection string with a connection object.
Dim objOracleConnection As New OracleConnection(strConnectionString)
' SQL query for returning data rows.
Dim strSqlQuery As String = _
"Select dname, deptno " & _
"From dept " & _
"Where deptno = 10" '
' Command object to make this query work.
Dim objOracleCommand As New OracleCommand(strSqlQuery, objOracleConnection)
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
' Identify what type of command is being used.
objOracleCommand.CommandType = CommandType.Text
Try
objOracleConnection.Open()
' Set up a Data Reader and load it with data.
Dim objOracleDataReader As OracleDataReader = _
objOracleCommand.ExecuteReader()
objOracleDataReader.Read()
' Convert the department number to a string.
lblDepartmentNumberFromOracle.Text = _
CStr(objOracleDataReader.Item("deptno"))
Catch ex As Exception
MessageBox.Show(ex.Message, "Error")
End Try
End Sub
End Class
I still want to thank you for the help you are providing.
Truly,
Emad

Fatal error when trying to add derived table

Hello,
I'm new at desiging a universe. I get the following a fatal error when trying to add a derived table to my universe:
1 processor x Family 15 Model 0 Stepping 0
Windows 2000 Workstation v5.1 build 2600 (S)
Physical Total/Avail: 2.097.151 Kb / 2.004.940 Kb
Temp directory C:\DOCUME1\xxxxxx\LOCALS1\Temp\ (1 Kb available)
'Unknown' video card
1280 x 768 in true color
(doesn't make sense to me)
I use an ODBC connection that connects to a MySQL database. When I test the connection it's fine.
I am trying to add a derived table because it seems that my universe cannot produce LEFT OUTER JOINS. I read somewhere that I should set my ansi92 parameter to YES instead of NO. But, everytime I re-open my universe, it sets itself automatically to NO again.
My utlimate goal is :
For example, list ALL the people, left join my table to their websites, but return ALL the people, even if they don't have a website.
I dont' understand, my join should be simple enough.
Anybody knows what could be causing all these restrictions ?
Thanks for you help.
Edited by: Sose Canadian on Feb 9, 2009 9:40 PM

Hi Sose,
In BusinessObjects (Universe) Designer, the outer join option in a join is not available and is dimmed when using a Generic ODBC connection.
Try Following Solutions:
Solution : 1
When using an ODBC connection the odbc.prm must be modified on the machine where BusinessObjects Designer is used.
Use the following steps to modify odbc.prm:
1. Locate odbc.prm in the following folder:
\Business Objects\Business Objects Enterprise 11\win32_x86\dataAccess\Connection Server\odbc
2. Open odbc.prm in a text editor and modify the parameter 'EXT_JOIN' so its value is 'YES' instead of 'NO'.The outer join option is now available in BusinessObjects Designer.
If the outer join option is still not available after following the steps above. open odbc.prm in a text editor and modify the parameter OUTERJOINS_GENERATION. Change its value from 'NO' to either 'ANSI92' or 'ODBC'.
Solution : 2
This can occur when user is using a non-database specific middleware such as generic ODBC. Generic ODBC allows creating a successful connection and universe, however will not allow the Outer Join option.
The syntax for outer joins is specific to each database and the Generic ODBC driver only lets you access standard common features of all ODBC data sources.
Ensure that you are using the database specific middleware to create the connection.
I Hope this Helpsu2026.
Thanksu2026.
Pratik

Keep getting 5002 Error when trying to Sign In

Hello,
I created a new @me.com address today for a seperate Apple ID account. I am needing to sign into the iTunes Store, but I keep getting a response that says:
"We could not complete your iTunes Store request. An unknown error occurred (5002)."
Any ideas as to what's going on here?
I also took a screen cap of the issue:
Thank you for the help!
Marcus

Thank you for your response Carolyn; however, that article does not fix my problem. I am getting this error when trying to sign into the iTunes Store on my Mac.
I get the same problem when signing into the Store on the iPad or iPhone. I simply can't log in, but when I go to iCloud.com or the Apple ID login on Apple.com, it works.
Marcus

Get an error when trying to add a new object!

Similar Messages

Maybe you are looking for