Get AP Ethernet MAC and Radio MAC command
Hello,
I would like to get a list of the associated APs on my controller. I would like the list to show the name of the AP, the Ethernet MAC, and the Base Radio MAC address. I planned to do a show run-config, save that information to a file and then parse that file for the information I want, but I am guessing there is an easier way. If so I would appreciate a point in the right direction as I am having trouble locating such a command.
Thanks,
Mike
leolaohoo wrote:I would like the list to show the name of the AP, the Ethernet MAC, and the Base Radio MAC address. I hope you like doing this CLI because the command is: sh ap config general I planned to do a show run-config, save that information to a file and then parse that file for the information I want, but I am guessing there is an easier way.Here's an easier way: What config???? The AP doesn't have a config, per se. All the config comes from the WLC. The only thing different are the IP addresses, hostname and location (among other things).
I do like doing things the CLI way. However the command sh ap config general does not show the Radio MAC address. It only shows the Ethernet MAC.
I know the vast majority of the config is on the controller. I said in my question that I want to view that information for all APs on the current controller. When I referenced show run-config I meant on the controller. The output of that command shows all the information I want (AP Name, Ethernet MAC, Radio MAC, for ALL APs) but it also displays a barrage of other information. I was hoping there was a command that still displayed all of that information but in a more concise way.
Similar Messages
-
I set up a new time capsule on a wireless 4g modem. I started the initial backup. It's been five hours and it still says "making backup disk available (4.97 GB of 18.52 GB)." Can I stop the whole thing, connect my computer to the time machine using an ethernet cable and start over to increase the speed of the backup?
Thanks,
DavidBunce wrote:
oh i already did that. Im working on my imac and looking into this on my macbook. Was able to reproduce the issue again by trying to open TM. Locked out the finder again and had to restart. I checked the serial number and it was an early 2009 purchase with no coverage.
If you bought a Mac and got AppleCare with it, within 2 years of buying the TC, the TC is covered, too.
I have to admit that this $500 unit was the first to apparently junk out. The western digital that had my main data on that is my daily external that I store about 2TB of data on is still perfect and the new technology TM appears to already be cashed. Love the computers, not to big of a fan on the externals of the apple TV's. No life expectancy. Neither here nor there.
suggestions before I either get this looked at or scrap the HD on it and move forward.?
Reset the TC. See [Resetting an AirPort Base Station or Time Capsule FAQ|http://support.apple.com/kb/ht3728].
Try a "full reset" of Time Machine, per #A4 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
If all else fails, take it to your local Apple Store or Authorized Repair location, they may be able to determine whether the disk is dead.
If it is, they might replace the TC for you. If not, they won't repair it, but if the electronics are ok, you can replace the HD yourself, if you want to. See http://discussions.apple.com/thread.jspa?threadID=2542983 -
HT5299 which is my ethernet mac address when in a retina with adapter?
Hi,
I need to get my ethernet mac address, but i have a macboock pro retina displays that only have wireless connection. I bought the gigabit ethernet adapter, but i need the mac address because the University system that will provide me the net connection needs it to allow my computer to the net.
Where can i find it?
Thanks!Plug the adapter into the MBP-R (*) and go to System Preferences > Network > Thunderbolt Ethernet > Advanced.
(*) You may also have to plug an Ethernet cable into the adapter at least once. Mine has been plugged in, and I didn't check the MAC address before the first time, so I can't tell for sure. -
I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and why I have it
I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and w I have it
There is no need to download anything to solve this problem.
You installed the "Genieo" malware. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the malware (as long as you never reinstall it.)
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Applications/Genieo.app
/Applications/Reset Search.app
/Applications/Uninstall Genieo.app
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib
/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib
~/Library/Application Support/com.genieoinnovation.Installer
~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 2
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this trojan. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the attacker sometimes shows up under the name "Genieo support." He will tell you to run a fake "uninstaller." As he intends, the uninstaller does not completely remove the malware, and is in fact malware itself. -
i just restarted my mac then suddenly when it boots,disk utility came and says different option like repair disk, get help, reinstall OSX and I tried to click disk repair but it says that I am um able to repair the disk
It sounds like your hard drive either has a software problem that Disk Utility cannot fix or that the HD has failed (mechanically).
Your Mac may have booted either to your recovery partition or to internet recovery in an attempt to repair the drive- I can't tell from your post.
I'll assume that it was the recovery partition.
Try to boot into internet recovery (hold down option command R at restart), and see if you can repair your HD with Disk Utility. You should also repair permissions while you're there.
If that doesn't work, try to boot into single user mode (restart, hold down ⌘S until you see a black screen with white text) and repair your hard drive. Here's a reference with directions: Repair Your Hard Disk in Single User Mode | Everything Macintosh
If that doesn't work you have a few options:
If your mac originally came with installation disks, you can try to boot from the installation disk and then see if you can repair the HD.
There is a small chance that Techtool Pro 7 will be able to repair your HD if Disk Utility can't.
If none of that works then your HD has probably failed and will need to be replaced, which is not too difficult to do yourself if you can use a screwdriver. -
My MacBook Pro was downloading apps from iTunes and I shut the computer down at my I laws house or so I thought? When I pulled the computer out of my backpack it was still on? I tried to login and it kept spinning so I turned it off and now I only get a gray screen. I can boot it in the windows side and have an external hard drive with time machine backup on it but don't know how to load it without getting onto the Mac side?
Please help!turn off the mac completely
as soon AS you hit power button press following 4 keys
Option + Command + P + R
that should reset it -
Window 7 has taken over my IMac and I can't get back to Mac OS
I have been running window 7 with bootcamp for about a month. Until recently, I could click the bootcamp icon in the windows systray and restart in Mac OS. Well, this week, I could no longer see the Bootcamp icon in the systray. Right clicking on the systray would bring up a window with options for various "hidden icons" one of which was the Bootcamp icon. I changed the status from "show only messages" to "always show" but still couldn't see the icon. So I clicked on the option to "show all icons on taskbar" and still can't see the bootcamp icon and now can't get back to the "options menu" ;(
I've tried rebooting while holding down the alt key....restarts in windows both with restart and shut down and then restart
I've tried entering the command at the command line as suggested in an apple help doc,(it's a long command and I don't have it handy but I copied it from the web page) but that just gives a "command not recognized" error.
What happened to my BootCamp!? and how can I get to the Mac OS?
TIACheck your control panels which is where that shortcut goes anyway.
Holding x on startup should also boot into Mac OS.
Boot from OS X DVD and go to Utility menu => Disk Utility, and repair your Mac partition.
You may want to do some maintenance on Windows as well. -
It was advised on a radio program to get Security for Macs as they are becoming a target. Is this the case?
Mac users often ask whether they should install "anti-virus" software. The answer usually given on ASC is "no." The answer is right, but it may give the wrong impression that there is no threat from what are loosely called "viruses." There is a threat, and you need to educate yourself about it.
1. This is a comment on what you should—and should not—do to protect yourself from malicious software ("malware") that circulates on the Internet and gets onto a computer as an unintended consequence of the user's actions. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the computer, or who has been able to take control of it remotely. That threat is in a different category, and there's no easy way to defend against it.
The comment is long because the issue is complex. The key points are in sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
☞ It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
☞ It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
☞ It can easily be disabled or overridden by the user.
☞ A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
☞ An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
Apple has so far failed to revoke the codesigning certificates of some known abusers, thereby diluting the value of Gatekeeper and the Developer ID program. These failures don't involve App Store products, however.
For the reasons given, App Store products, and—to a lesser extent—other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandbox security is based on user input. Never click through any request for authorization without thinking.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. Malware is a problem of human behavior, not machine behavior, and no technological fix alone is going to solve it. Trusting software to protect you will only make you more vulnerable.
The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and Internet criminals. If you're better informed than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
Software from an untrustworthy source
☞ Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, or your browser, or any other software. A genuine alert that Flash is outdated and blocked is shown on this support page. Follow the instructions on the support page in that case. Otherwise, assume that the alert is fake and someone is trying to scam you into installing malware. If you see such alerts on more than one website, ask for instructions.
☞ Software of any kind is distributed via BitTorrent, or Usenet, or on a website that also distributes pirated music or movies.
☞ Rogue websites such as Softonic, Soft32, and CNET Download distribute free applications that have been packaged in a superfluous "installer."
☞ The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
Software that is plainly illegal or does something illegal
☞ High-priced commercial software such as Photoshop is "cracked" or "free."
☞ An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission. All "YouTube downloaders" are in this category, though not all are necessarily malicious.
Conditional or unsolicited offers from strangers
☞ A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
☞ A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
☞ You win a prize in a contest you never entered.
☞ Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
☞ A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
☞ Anything online that you would expect to pay for is "free."
Unexpected events
☞ A file is downloaded automatically when you visit a web page, with no other action on your part. Delete any such file without opening it.
☞ You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
☞ An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
☞ Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
I don't say that leaving the safe harbor just once will necessarily result in disaster, but making a habit of it will weaken your defenses against malware attack. Any of the above scenarios should, at the very least, make you uncomfortable.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it—not JavaScript—in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a padlock icon in the address bar when visiting a secure site.
Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
7. Never install any commercial "anti-virus" (AV) or "Internet security" products for the Mac, as they are all worse than useless. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
Why shouldn't you use commercial AV products?
☞ To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. This technique is a proven failure, as a major AV software vendor has admitted. Most attacks are "zero-day"—that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry is coming to the realization that traditional AV software is worthless.
☞ Its design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere. In order to meet that nonexistent threat, commercial AV software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
☞ By modifying the operating system, the software may also create weaknesses that could be exploited by malware attackers.
☞ Most importantly, a false sense of security is dangerous.
8. An AV product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject low-level code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An AV app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful, if at all, only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware.
Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else. A malicious attachment in email is usually easy to recognize by the name alone. An actual example:
London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
You don't need software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's no reason to use recognition software unless an organizational policy requires it. Windows malware is so widespread that you should assume it's in every email attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may serve a purpose if it satisfies an ill-informed network administrator who says you must run some kind of AV application. It's free and it won't handicap the system.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user, you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither can you assume that you will always be safe from exploitation, no matter what you do. Navigating the Internet is like walking the streets of a big city. It can be as safe or as dangerous as you choose to make it. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices. -
Do I have a virus on my Mac Air because I keep getting ads for MacBooster and MacKeeper?
Do I have a virus on my Mac Air because I keep getting ads for MacBooster and MacKeeper?
You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
Getting a new Mac this Christmas. I have several questions:
1. How do I transfer files/applications from old to new?
2. I have an external hard drive, do I need to save iTunes account to it?
3. How do I wipe the old Mac clean to give to family member?1. Use the Migration Assistant the first time you turn on the new computer.
2. No, but you should do so as a backup.
3. Click here and follow the instructions. If the computer originally shipped with Mac OS X 10.6.8 or earlier, when you reach step 5, insert its original disk, restart with the C or Option key held down, use the Disk Utility to erase the internal drive, and install a fresh OS.
(118241) -
On startup Mac Pro I get a blue screen and a cursor on the upper left. The mouse cursor shows up independently. Is it likely a video card failure?
I managed to boot the computer and get the desktop to show. I now have a "repaired" computer. There are several problems that have cropped up. One is that I can only start up now in Safe Boot mode. Is there a way to turn it off? Also, I do not have a sound list, so I can't access anything requiring audio. Google Chrome only shows up as a white screen. Pictures that loaded before don't load in browsers, etc. Any suggestions? I figure I should reinstall Mac OS Lion for starts, maybe even do a mirror backup and reformat the drive. I think this drive has turned into scrambled eggs...what a headache!
-
I am having trouble getting my My Mac Book Pro 15" Retina to wake up with an Apple Bluetooth Keyboard and Mouse while Docked in a Hengedock vertical docking station. The Keyboard and mouse work great with the laptop lid open but when closed in the docking station the bluetooth signal does not seem to transmit. Is there a setting that can be changed to allow an Bluetooth keyboard and mouse to wake the computer while docked?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Sorry, I'm new to the Mac world. I recently got a new IMAC and installed my Epson CX5800F printer and it worked fine. Then a few weeks later I installed Windows7 through Bootcamp and I think it reconfigured a port or something and now I get a communication error and it won't print. Can anyone help me with this problem, and/or help me get the port back the way it was? Thanks, Barry
While looking through profile first aid, I came across this that might help explain my problem.
Searching for profiles...
Checking 20 profiles...
/Library/Printers/EPSON/InkjetPrinter2/ICCProfiles/Standard.profiles/Contents/Re sources/Epson IJ Printer.icc
Tag 'desc': Tag size is not correct.
Tag 'dmdd': Tag size is not correct.
Tag 'desc': Description tag has a bad Macintosh string.
Tag 'dmdd': Description tag has a bad Macintosh string.
The file is locked. Could not be fixed.
Repair done - 0 out of 1 profiles fixed. -
my mac's keyboard is not working with my mac.the green light blinks and i cannot get onto my mac. everything on the support questions does not help because i cant go on the mac and i cant sign in
If you can't sign in, then you can't troubleshoot and/or pair the keyboard until after that........ so, for that, you will need to borrow someone's USB wired keyboard in order to get signed in and to the Keyboard Bluetooth Preferences.
-
When using my MAC desktop, when I try to play a video on the Apple Homepage I just get a spinning wheel and it says "missing plug-in". What's the issue?
Yep. I installed Lion this morning. Open Mail. All is good. Went to video on the Apple's homepage and my whole computer froze up. I couldn't even shut down the computer properly. I just had to shut it off and restart. :|
Although, no "missing plug in" prompts were coming up for me. Just a frozen (brand new) iMac.
Maybe you are looking for
-
How can I get all new sites to open in a new tab rather tnan replacing the site in the existing tab?
When I click on most, if not all, of my bookmarks, the new site opens in the tab from which I was open. I would like the new site to open in a new tab (unless I type in the name where the address was. How do I get this done. Jerry Kersten
-
My ipod touch won't turn on and I have tried the reset button n home button a few times, it still won't work. So, I'm thinking of upgrading to Ipad but I do not want to lose my files from Ipod Touch. My question is, will all the files I have synced u
-
Some words overlooked by spotlight in pdfs
i am making pdf's of illustrator files so i am able to have spotlight index them but in some pdfs spotlight seems to be overlooking certain words for no apparent reason. all words may be indexed except for one. if i open the pdf in preview or acrobat
-
I updated my ipod touch to 1.1.2 and the networking is just not working. It connects but fails to get an ip address or anything making the internet useless. Has anyone been able to fix this problem?
-
Can Aperture Use The Presets I have In Camera Raw?
Hi, I have some very handy Presets that I apply to images when opened in Camera Raw 4. I want to use the same Presets in Aperture 1.5, but despite much poking around, I can't seem to find a way to load them. Can it be done? Thanks. Hugh