Get appointments for every room

There's any way to get all the appointments of each room? With EWS I have only found how to do this with the appointments of each calendar but i haven't found how to do it for get all the appointments divided in Rooms.
I want to show the name of every room followed by all his appointments.
Thanks!

There may be an easier way to accomplish your end goal. Question for you first though, what is the reason you want to see every appointment for every room all at once?

Similar Messages

Excise invoice getting split for every 2 line items in J1IS

Dear Experts,
While doing J1IS - Excise invoice getting split for every 2 line items.
can anybody help me.
regards,
sri ram

Hi,
Please check the maximum number of line items per excise invoice under customizing
logistics general->Tax on goods movement->India->Basic settings->Maintain excise registration->check for EI items.
I think it is defined as 2.
Regards,
Krishna A S V

Modem - router getting reset for every 15 mins

My modem and router gets reset for every 15mins and every time I call Comcast not getting proper support . Can someone hear this. This happens every weekend.

freezing at regular intervals:
:http://blog.bonardo.net/2011/09/30/is-your-firefor-freezing-at-regular-intervals
: https://addons.mozilla.org/firefox/addon/places-maintenance/
Install add-on, run at least the option mentioned in the article, I ran them all. When finished you can uninstall the extension, all without taking taking Firefox down, The extension is one of the new JetPack extensions.

I am getting message for every app connect to iTunes to push notification

I am getting message for every app connect to iTunes to push notification

I had the same problem too!
But after i changer the usb cable , everything went back to normal
hope it help!

Getting message for every record while pressing down arrow key:apps form

Hi,
when i query the form and when I am going through the records by pressing the down arrow of the keyboard I am getting the message 'Do you want to Save the records' for every record even though i did not update any record
How to avoid the message?
I developed the form in oracle applications and it is a master detail form which have a header block and lines block.
thanks & regards
Deekshit

Hello,
You can review the following;
https://metalink.oracle.com/metalink/plsql/f?p=200:27:627127677634310554::::p27_id,p27_show_header,p27_show_help:173383.995,1,1
Hope it helps.
Adith

Getting message for every record while pressing the down arrow

Hi,
when i query the form and when I am going through the records by pressing the down arrow of the keyboard I am getting the message 'Do you want to Save the records' for every record.
How to avoid the message?
I developed the form in oracle applications and it is a master detail form which have a header block and lines block.

You are probably changing a value in POST-QUERY trigger, check your trigger and make sure you're not updating any values.
For Oracle Apps specific questions, I suggest you post in the E Business Suite section of the Forums.
Tony

Query for getting data for every quarter for financial year

Hi,
My problem is I need to get the data for every quarter for financial year and also I need data for every week for financial year.
For example for financial year 2012-13, Apr2012 to Jun2012 would be Q1, Jul2012 to Sep2012 would be Q2 and so on. Total 8quarters should come upto Apr2013.
In the same way 1st apr 2012 to 7th apr 2012 would be week1, 8th apr to 15th apr would be week2 and son on. How to write a query for this scenario in oracle. Can anybody help me on this. very urgent..
Thanks in advance.

lakmesri wrote:
Hi,
My problem is I need to get the data for every quarter for financial year and also I need data for every week for financial year.
For example for financial year 2012-13, Apr2012 to Jun2012 would be Q1, Jul2012 to Sep2012 would be Q2 and so on. Total 8quarters should come upto Apr2013.
In the same way 1st apr 2012 to 7th apr 2012 would be week1, 8th apr to 15th apr would be week2 and son on. How to write a query for this scenario in oracle. Can anybody help me on this. very urgent..
Thanks in advance.
How can you get 8 quarters within a year ? I'b be concerned here.
lakmesri wrote:
Hi,
In the same way 1st apr 2012 to 7th apr 2012 would be week1, 8th apr to 15th apr would be week2 and son on. How to write a query for this scenario in oracle. Can anybody help me on this. very urgent..
Thanks in advance.
First, that question is really not clearly asked. Second how could it be urgent ? You even did not tell us your Oracle version, did not show any tables descr, output sample nor any effort on your side to work on.
Nicolas.

Getting Image for every 2 second using AVI stream

Hello,
Could I save image for every 1 or 2 second from AVI stream (not file). It is because I have a piece of software which could capture image on live and could save the image as AVI format. However, I need the file format as JPEG format for every 1 or 2 second.Am I do it like this?
Thanks
fkli

Why don't you get a simple jpeg obtained by ftp from your program? For example I've downloaded a ftp server named webcam32 (http://www.surveyorcorp.com/webcam32) that replaces a jpeg image by ftp every second. After that, it was rather easy to write an applet that displays the updated image. Most probably your program can do that for you.
Hope yu'll find this useful.

Mail sent by the program are getting appended for every line item in ITAB.

Hello Experts,
My program has to send mail for every line item in my internal table. Each line itme will provide the data to be filled in body of the mail .Now the problem is when i recieve mail in outlook the body of the mail is getting appended every time i recieve the mail
For example , if the mail has to go for 3 entry in itab out of five then i'm getting 3 mails but 2nd has body of 1 also and 3d has body of 1st and 2nd.
I'm using loop - endloop and it is happening due to this but is there any other way out to send mails for each line without body getting appended.
Please see the code below i'm using:-
LOOP AT lt_bg INTO lw_bg.
PERFORM populate_message_table.>>>>>>Preparing body
PERFORM send_email_message.>>>>>>>>> need to capture in loop as evry line itme has distinct subject of mail
ENDLOOP.
PERFORM initiate_mail_execute_program.
Thanks,
Naveen

Hi,
I'm using Clear wa and refresh ITAB but still i'm getting the body appended.
Thanks

Session gets created for every request.

Hi ,
I have two servlets where i set a object in the session in one servlet say servlet1.java and get in another servlet say servlet2.java.
When i pass my session object from servlet1 to servlet 2 , servlet2 is supposed to get the arrtibute , but its always gives me a null value.
I found out that a new session is getting created every time when i try to access servlet2.
I tried to print the session object , and it clearly tells me that the object is differet from the one i set.
Can anyone let me know why is this happening and how do i solve this .
This happens for me in weblogic 8.1 setup.
In my JBOSS set up with the same code it works fine.
Thanks in advance.

Sasikanth,
Pardon me if I am stating the obvious, but according to your description the problem is with WebLogic. So did you try a WebLogic specific forum?
Good Luck,
Avi.

Getting dump for every senario

Hi experts
I am new to workflow i am getting dump on execution of every senario......
i am providing code of that one.... plz help me.
The following syntax error occurred in the program
CL_SWF_RUN_WIM_LOCAL==========CP :
"You can only define attributes in the PUBLIC, PROTECTED or PRIVATE sec"
Error in ABAP application program.
The current ABAP program "CL_SWF_RUN_WIM_FACTORY========CP" had to be
terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Thanks,
Prasad.

Hi,
This class CL_SWF_RUN_WIM_LOCAL is essential in tRFC to Execute the workflow.
The class would have affected.
1) Check any User exit or Badi used related to this Class, if so Deactivate those and check.
2) Then Still you getting the dump, check for note corrections.
Regards,
Surjith

Queue is getting struck for every delta change in CRM 5.0

Hi Middleware gurus,
The queues are getting struck with status 'READY' for each of these following scenarios:
1. Individual new sales order upload from CRM to R/3 (CRM - SMQ1)
2. Individual sales order delta changes upload from CRM to R/3 (CRM - SMQ1)
3. Individual new materials donloaded into CRM from R/3 (CRM - SMQ1)
4. Material delta change download from R/3 to CRM (CRM - SMQ2)
5. Knowledgebase delta changes download from R/3 to CRM (CRM - SMQ2)
I have to manually release the queue everytime, so that the changes can be uploaded. Am I missing something?
By the way individual new sales order created in R/3 and delta changes on R/3 orders are getting replicated into CRM without any problem.
Thanks,
Kishore

Hi Kishore,
We had similar issue before. Do not use the replication scenarios X,Y or Z. You have use the scenario A which will solve your problem for sales order replication issues. Please refer to the note 705200. For rest of issues make sure in both the systems the queue scheduler is running. If not running actively then register the each queue in both the systems using SMQS and SMQR. If still the issue is not solved then let me know.
Award points, if the issue is solved
Cheers,
Paul Kondaveeti

Import from DDL script - Why do I get domains for every column type?

I've only been using Data Modeler for a day and my first task was to import a database definition from a DDL script.
I noticed that every column definition resulted in the creation of a domain for the column type, with names like "VARCHAR_0_0_30" for a varchar2(30) type.
Is there some way of avoiding the creation of domains in this way? I'd prefer to use domains only when they serve a more useful purpose such as validation by check constraints.

Go to Preferences - > Data Modeler - > DDL and uncheck "Create Domains During Import" option.
Ivan

Now I get Notifications for Every New Post in Subscribed Topic

I believe this is a change from the old forums. Used to be I would get only one e-mail notification of new posts in a topic to which I was subscribed and would get no more until I revisited the topic (in a logged in state). Now I get an e-mail each time a new post is made even if I haven't visited the topic. This tends to fill up my mailbox when I'm subscribed to a busy topic. Was this a deliberate change for a particular reason?
Thanks,
Steve M.

Hehe - no worries Steve,
We have three bug threads in total!
Enhancements
http://discussions.apple.com/thread.jspa?threadID=240110
Bugs
http://discussions.apple.com/thread.jspa?threadID=240107
Bug discussions
http://discussions.apple.com/thread.jspa?threadID=233642
You're very welcome to add any bugs that you discover.
Kind regards,
Gopha.

Reg vdbench iorate is getting decreased for every run

Hi,
I am running the below parameter file to test a zfs volume(4TB).
sd=sd1,lun=/dev/zvol/rdsk/storage0/lu2,thread=16
wd=wd1,sd=sd1,xfersize=4096,rdpct=0,seekpct=random
rd=run1,wd=wd1,iorate=max,elapsed=60,interval=1
My understanding is that
It performs 4K, 100% write, 100% random for 60 sec with max iorate possible. Please confirm.
When I repeat the same test, the IOPS values are going down. What could be the reason?
Also what is the kind of write IO Pattern it uses -Is it full random IO, pseudo random IO or Repeating bytes?.How to configure these values. Please let me know.

That is a difficult question to give a straight answer to. With storage subsystems having terabytes of RAM and multiple terabytes of SSD the only way to determine steady state is to just run it and see what happens. That is why the detailed second-by-second reporting done by Vdbench is so important. Once you know how long the warmup takes, you can use the warmup= parameter,

Get appointments for every room

Similar Messages

Maybe you are looking for