Get audio to stop when user rolls over / clicks on sidelet

So ive recorded some software simulation, then i want to add
in a sidelet, and when the user rolls over the sidelet i want the
slide and audio to pause until they close or roll off -- can you do
that. My question is a 2 parter, as in,i would like to know for
both, a rollover and a click as i may use both tecniques on
different slides

Hi Paco,
Here is an AS3 version for Captivate 4:
http://www.cpguru.com/demonstrations/as3(cp4)MuteSounds.zip
I don't have CP4 installed on this machine anymore so I haven't been able to test if it works or not.
Good luck ;o)
/Michael
Visit my Captivate blog with tips & tricks, tutorials and Widgets.

Similar Messages

Getting Audio to stop when swiping within an article?

I have an audio clip that a user can play on a particular page within an article. I'd like the audio to stop playing if the user decides to continue on in the article (swiping down, not left or right). Is this possible? Selecting "stop audio on page turn" only stops it when swiping left or right to the next or previous article.
Has anyone found a fix for this?
Thanks,
Christopher

if you autokplay a transparent & silent audio of only one secnd any other
audio/video stops because the iPad can only play one media at a time.
—Johannes
(mobil gesendet)

When i roll over a photo i get a box ..save, copy, print, info, folder

all of a sudden i have a new version of firefox now when i roll over a photo i get a small pop up, asking save, copy, print, info, folder, it is annoying

Hi, Shilo, could you provide me a screenshot of it?

When I enter time machine (on Time Capsule) i see the stack of screen shots and the time line. However, when I roll over the mouse pointer, the time line does not activate. The cancel button does not get me out of the app: have to alt cmd esc. Ideas?

When I enter time machine (on Time Capsule) i see the stack of screen shots and the time line. However, when I roll over the mouse pointer, the time line does not activate. The cancel button does not get me out of the app: have to alt+cmd+esc. Ideas?

I have never seen it but then I run SL which is much more reliable than Lion..
See
http://pondini.org/TM/E4.html
Check the master guru of all TM problems.

Why do my finder links expand at the bottom of the screen when I roll over them?

I turned my computer back on and now my finder buttons on my bottom menu bar (where iTunes, safari etc. is) expand to enlargen each app when I roll over them. How did this happen? How do I stop it?
Thanks
Lucas

Lucas,
Open System Preferences>Dock...and make the appropriate selections to match your Dock preferences.

Is it possible to have a menu with just one button highlight when someone rolls over it?

is it possible to have a menu with just one button highlight when someone rolls over it? if so how would you do it as i tried doing an invissble button but it didn't work?

Get yourself a copy of Total Training for Encore DVD 1.5 by Daniel Brown. This exact scenerio was explained in section 4) Building Menu and
section 7) Advanced techniques.
I refer to Dan's video time & time again. It's from 2004 but he's still right on the mark regarding the generation of every aspect of creating a DVD.
They now offer their entire online.
www.totaltraining.com
Good luck

When i roll over my mouse to try the new personas, nothing happens?

I updated firefox and on the start-up page, it recommended me to try some new personas. When i rolled my mouse over the personas, nothing happens. On my laptop however, when i roll over, the persona does change.

Unfortunately, many less-technical users won't understand your reference "whitelisting" (which doesn't actually appear in FF's settings). Some may even assume they should turn off "Warn me when sites try to install add-ons"—and that's not a good idea.
So to avoid confusion, here's how to actually do what you described:
1. On Firefox's Tools menu, click Options. The Options window appears.
2. At the top of the window, click Security. Be sure the checkbox is selected that says "Warn me when sites try to install add-ons", then click the Exceptions button next to it.
3. A dialog box appears that says "Allowed Sites - Add-ons Installation". In the text box that says "Address of web site:", type:
www.getpersonas.com
5. Click the Close button to close the dialog box, then click OK to close the Options window.
You should now be able to preview Personas by pointing to them.
:?)

Can I get audio through iPhone when using apple tv?

Can I get audio through iPhone when using apple tv?

What do you mean exactly? Are you wanting to output the audio to your iPhone while say watching a video on your Apple TV? If so, I'm afraid it's not possible. However, you should post this in the Apple TV forums for a better confirmation on then. There are some prettty knowledgable people who hang out there.
https://discussions.apple.com/community/appletv
B-rock

TS4002 I'm getting an error message when I try the click on a link in an email. No associated application could be found. How do I fix this problem?

I'm getting an error message when I try the click on a link in an email. No associated application could be found. How do I fix this problem?

Is this a one-off or a general problem? If a one-off, is it a link to a web page or something else? If not a web page, try control-clicking on it and choosing to download the linked file. This will at least access the file though it might be to something you don't have an application to open with. If you do this, what sort of file do you get? - select it and hit command-i to get information on it.

I bought a component av cable for my ipad2. I get audio but no video. user guide states that it should mirrorthe screen when connected. Can someone please help?

I have an Ipad 2 and I am trying to use the a new component av cable I bought to play hulu on my tv from the iPad 2. I get audio but no video. Can any help?

willyinpr wrote:
...Here you can see "TV OUT", where it says "widescreen" make sure is ON.
I have my iPad Video set to "widescreen", but it didn't make a difference when I briefly tried it with a HDMI connection from my iPad2 to my Samsung TV. The video was letterboxed as was the iPad homepage when it was displayed on my big TV.
I didn't try a streaming video so I don't know if that would be letterboxed or not. I do have a movie on my iPad and I'll give it a try (perhaps tomorrow). If it isn't letterboxed, I'll post it here.
Overall (at least via HDMI), I was very unimpressed with the process. The picture seemed washed out and the resolution certainly suffered. I don't remember what my test video was, but the results were what one would expect with a SD signal. At this moment I don't see any serious usage of this process for me.

Audio portion stops when playing movie

The audio portion of my movie stops playing. I have remade the movie and the disc several times. There is no indication, prior to watching it on TV, that there is a problem. The burn is successful and when I open the file the movie plays fine on the computer. I don't know if the way I have made the movie is contributing to the problem. Obviously, I'm new to this so please bear with me if I'm giving too much information. I have a total of four clips (movies?) that I bring into the idvd menu. Three of the clips are based on months throughout the year. The fourth clip is a combination of those three so that I have an undivided movie of the whole year. I guess I'm questioning whether the reuse of the pictures and music make a difference even though they are independent clips.
I'm using imovie and idvd 11.
Do you have any suggestions as to why the music quits and/or how I can solve this most frustrating and time-consuming problem? Thank you.

Hi
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an Audio-CD .aiff (Same as played on standard Stereo CD - no .mp3)
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provoking it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
Minuscular - - 176x144
Mobile - - - - - 480x360
Medium - - - - 640x480
Large - - - - - - 720x540 960x540
HD - - - - - - - - 1280x720
4. Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies — except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format — that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
• OR burn with Roxio Toast™ if You got it
Yours Bengt W

CHANGES STATES WHEN MOUSE ROLL OVER A DIFERENT OBJECT

Hello, i need to do the explained at the imatge with Muse.
When the muse ROLL OVER the image, the text buttons at the left column, must change the appearence,To indicate who is the artist of the photo. the same whit the image 2, and 3 and 4.... you said me that i can change the appearence at the states menu, i know this but i have to chancge the apearence of the text when the mouse ROLL OVER the imatges, not qhen roll over the text ( Thats its normal and easy).... I have to ampliate the x¡zone of effect for rollover
Thankyou!! Sorry for my english.

I have replied on your previous thread for same query :
https://forums.adobe.com/thread/1471464?sr=stream&ru=2394028
Thanks,
Sanjit

Mac mini bluetooth audio connection stops when paused

Hello!
I have a Mac mini late 2012, i5 Version, 2.5Ghz as my home Desktop. The OS is 10.9.5 Mavericks.
It's connected to a Logilink Bluetooth to 30 pin dock connector adapter, standing on an Apple Dock, connected to my Home Stereo. My Problem is, that everytime i pause the audio on my mini, the bluetooth connection just stops, and if i press play again, it plays through my internal speaker again.
I temporarily fixed this by playing a 10hour version of a song with 0 volume on itunes, but this shouldn't be a long-time solution.
I tried it with another bluetooth adapter, another dock, another home stereo. The issue probably is Mavericks, with it's awesome bluetooth settings, connect or don't connect.
Is there any program out there which sets the connection to permanent? Or is there an other solution?
Thank you very much in advance!
(Sorry for poor english. If you don't understand something, i could explain it in german!)

Ah, no joy, as suspected...I'm using Boot Camp version 4 and all i got was a flash drive full of boot camp version 3.1 - 3.3? A few firmware upgrades that says it isn't compatible...
IS THERE ANYONE AT APPLE THAT CAN HELP!!!
Jesus! I bought this a week ago and I can't even get audio! If this is the kind of service coming from Apple then I don't know...

Re: Not getting audio from TV when connecting MacBook Pro with all correct cables.

How do I get audio from the TV when connecting MacBook Pro with all the correct cables?

Hi Lynn,
If you're positive you have the correct cables, and positive they work, they must be plugged into an input on the TV made for that purpose, then that input must be selected on the TV's menu.

PCI-6602: Stop counting after roll over

Hi,
I'm programming a PCI 6602 Board and want to stop a counter after
it had a roll over. This option isn't available in the NIDAQ 6.7 I think!
If you know, how I could manage it, please reply.
thank you
Steve Dreger

Error -10920 is normally caused by speed limitations of your computer. Normally changing from debug to release mode will help fix this. Here are several other KBs that explain this error and how to fix it.
http://digital.ni.com/public.nsf/websearch/8FB9091CB9BB452B8525642000554799?OpenDocument
http://digital.ni.com/public.nsf/websearch/5D7774A864C1EE1786256713005D848D?OpenDocument
http://digital.ni.com/public.nsf/websearch/5d7774a864c1ee1786256713005d848d?OpenDocument
http://digital.ni.com/public.nsf/websearch/5d7774a864c1ee1786256713005d848d?OpenDocument
http://digital.ni.com/public.nsf/websearch/1B64310FAE9007C086256A1D006D9BBF?OpenDocument
If running the ResetDevice command does not work. I suggest opening MAX up and right click on Tradio
nal NI-DAQ Devices, and then click on Reset driver.
I hope this helps out.
Joshua

Get audio to stop when user rolls over / clicks on sidelet

Similar Messages

Maybe you are looking for