Get Batch date
Hi All,
How do we get Batch date ? is there any system field ?
Thanks in advance
Hi All,
I am running a program in the background mode.
I want the Batch date in which date i have sheduled the program . because i want to sort the material depending upon the batch date . if the batch date is even sort the material by decending and otherwise ascending.
so if the program is sheduled by 11 pm it will take 4 hrs to complete.it will complete next day morning 3am.if i take the sy-datum the date was changed and it will go to next date the sort will go wrong.
How can i identify the Scheduled date is there any system field or any another way ....
Thanks in advance .
Similar Messages
-
Splitting events after batch date change causes event to disappear
Hi all,
The basic (repeatable) scenario is this:
o I scan in a bunch of old pictures I want to keep in iPhoto (lets say 10)
o I import them into iphoto (no problems with import) 1 event with 10 pictures is created.
o I then take a specific set of 4 photos and split them out of the main event into a new event (everything still ok) - 2 events, 4 and 6 events respectively.
o I open the new event and do a batch date change on the 4 pictures, changing the date to the correct date of the picture
o I exit the event expecting it to move up in the list of events (I sort by date). It's gone! iPhoto lists the 1 new event and its 6 photos
o I change my sort (by time, by name, etc) and still not there.
o I find my library in finder, open the package, and the files are still there.
o I go back to iPhoto and click on "Photos". Walla! 10 pictures!
o I undo the data change and they show up again in events - 2 new events, 10 total pictures.
I've already done all the obvious checks (are you sorting by date, look up by even name, search by file name through all events etc.) I've talked with a product specialist and they said the standard "rebuild the library" which did not resolve the issue.
I can repeat this until the cows come home in the existing library. I've created a brand new library and it does not repeat, do there is something in my library not right. But I don't buy the standard "redo your library from scratch" (36K pictures, 50 faces and hundreds of places). Just like with faces, you can discard the db files, there must be something besides "rebuild automatically and if that doesn't work sorry start over". Was iPhoto coded in Redmond?
Has anyone had anything similar to this? I looked through the forums and couldn't see anything. If I have to rebuild this, I am done with iPhoto after having to rebuild due to faces too many times, and my question changes to what are folks recommendations for a more stable photo management software suite?
Thanks!
HOTGIf the problem doesn't repeat in another Library then obviously the issue is with that library.
As you've tried the basic rebuild: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
The obvious solution is to restore a good version from your back up and, er, Walla! as you say yourself.
Next least destructive option: Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Getting Batch from Packaging material Number (Batch characteristics)
Hi Gurus,
I've a requirement.
i want to know the batches where the packaging material is used.
Packaging material is one of the batch characteristics, if i assign the same packaging material number in one batch, that should not be assigned to another batch.
I want to know in which batches the same packaging material is assigned.
Please guide me?? which table has the links for batch, packaging material number and main material number???
How can i find this???
Thanks in advance.
Adi.we can use the MMCL transaction/BMBC to see this.
In MMCL we have a FM to get the Data. -
Batch Date in APO = 01.01.1970
Hi All,
I have a problem with the batch date in APO.
It shows as 01.01.1970.
This effects dynamic pegging as nothing gets pegged to it as it is
too far in the past.
There is a date of manufacture etc in R3 on the batch.
The Delta report shows no inconsistencies.
How can I correct this ?
Thanks,
TonyHi Tony,
You need to make sure all the characteristics values like (availability date, production date and expiry date) for batches are transfered to APO. For any batch you can check the same in versions tab of transaction /n/SAPAPO/RRP3.
For old batches if the characteristic is added later on then it will not pick the new characteristic value. For such batch goto MSC2N in R3 and in classification tab peform consistency check. Here it will acquire values of new charactristics. (For mass updation you might need to right BDC)
Then re-CIF batches again by again generating and activating IM.
Now the date 01.01.1970 should not appear.
Best regards,
Vaibhav -
Batch Data Capture to do a Goods Receipt via transaction MIGO.
Hi All,
I have a new requirement to perform a Batch Data Capture of a goods receipt via transaction code MIGO.
Currently the BDC approach is not feasible due to the fact that screen configuration is dynamic and may differ at times between different users and user profiles.
Therefore I have tried to use function module 'MIGO_GR_CREATE' instead. However after some initial investigation it has become clear that a material document number that is generated by SAP may not be returned by this function module after successful execution of a "GR".
Therefore does anyone know any function module to use in order to do a "GR" by passing or submitting a purchase order number + purchase order line item number (and possibly a delivery note number) and get back a material document number after successful/complete execution.
Thanks.HI ,
You can use 'BAPI_GOODSMVT_CREATE' to create goods recipt.
Check this code for reference..
MOVE x_purchaseorder TO goods_mvt_tab-ebeln.
MOVE eban-bnfpo TO goods_mvt_tab-ebelp.
MOVE up_tab-feld_12 TO goods_mvt_tab-menge.
MOVE eban-werks TO goods_mvt_tab-werks.
MOVE eban-lgort TO goods_mvt_tab-lgort.
APPEND goods_mvt_tab.
LOOP AT goods_mvt_tab.
MOVE sy-datum TO y_goodsmvt_header-pstng_date.
MOVE goods_mvt_tab-ebeln TO y_goodsmvt_item-po_number.
MOVE goods_mvt_tab-ebelp TO y_goodsmvt_item-po_item.
MOVE '101' TO y_goodsmvt_item-move_type.
MOVE 'B' TO y_goodsmvt_item-mvt_ind.
MOVE goods_mvt_tab-menge TO y_goodsmvt_item-entry_qnt.
* MOVE 'PCE' TO Y_GOODSMVT_ITEM-ENTRY_UOM_ISO.
MOVE 'PC' TO y_goodsmvt_item-entry_uom_iso.
MOVE goods_mvt_tab-werks TO y_goodsmvt_item-plant.
MOVE goods_mvt_tab-lgort TO y_goodsmvt_item-stge_loc.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
goodsmvt_header = y_goodsmvt_header
goodsmvt_code = ls_movement_code
testrun = y_testrun
IMPORTING
materialdocument = y_materialdocument
TABLES
goodsmvt_item = y_goodsmvt_item
return = y_return.
Regards,
Sachin M M -
How to get changed data in ALV in Web Dynpro for ABAP
METHOD on_data_check .
DATA:
node_spfli TYPE REF TO if_wd_context_node,
node_sflight TYPE REF TO if_wd_context_node,
itab_sflight2 TYPE if_display_view=>elements_sflight.
node_spfli = wd_context->get_child_node( name = if_display_view=>wdctx_spfli ).
node_sflight = node_spfli->get_child_node( name = if_display_view=>wdctx_sflight ).
CALL METHOD node_sflight->get_static_attributes_table
IMPORTING
table = itab_sflight2.
this code is ..get all data(changed and not changed)
but i want get changed data only, not all data.
how to get changed data?
Edited by: Ki-Joon Seo on Dec 27, 2007 6:04 AMHi,
To get only the changed data in the ALV grid of a WD, you need to capture the "ON_DATA_CHECK" of the ALV grid.
To this please do the following in the ALV initialization of the ALV table settings :
lr_table_settings->set_data_check(
IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CELL_EVENT ).
You may also do this:
lr_table_settings->set_data_check( IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CHECK_EVENT)
The above two ways would depend on when do you need to check for the changed data. If you want to check the data as soon as it is entered, then use the first method. Else, use the second method.
You need to register an EVENT HANDLER for this event.(You may do this in your VIEW or Component Controller).
In this Event handler, you would find an importing parameter R_PARAM which is a ref type of IF_SALV_WD_TABLE_DATA_CHECK.
The attribute T_MODIFIED_CELLS of this interface IF_SALV_WD_TABLE_DATA_CHECK will contain the modified cells of the ALV with the old & new values. -
I have a situation, where i need to write expression Period to date(PTD). i want to know how to get the period date. i want you to help in writing Period date or else is there any function to get period date for a given date(the date is given
from the parameter dynamically) in MDX for SSRS report
ramHi ram,
Per my understanding that you want to get the period date based on the month selected and the given date, right?
Could you please provide details information below to help us better understanding your requirements, thus we will be more effective to provide an solution:
What is the format of the period date you want to get, is this date in the DB and you want to filter it based on the month and the given Date?
Did the month and given date are two parameters in the report? if possible, could you please provide some sample data in the DB and also the snapshot of the report structure
I assume you want to get the period date(mm/dd/yyy) between the select month(e.g:Feb) and the given date (10/1/2014) and you should get the date between(02/01/2014-10/1/2014).
If so,and you also have two parameter "Month","EndDate"(EndDate is the given date), please reference to details information below:
You can create an new parameter "BeginDate" (Date/Time) which is the begin date of the period, you can use the expression to get the value based on the value of the month and the year value from the given date,finally hide this parameter:
Specify the available value:
Label:=Parameters!Month.Value &"/01/"& DatePart("yyyy",Parameters!EndDate.Value)
Value:=CDate(=Parameters!Month.Value &"/01/"& DatePart("yyyy",Parameters!EndDate.Value))
Specify the default Value:
Value:=CDate(=Parameters!Month.Value &"/01/"& DatePart("yyyy",Parameters!EndDate.Value))
Add filter to the dataset as below:
Preview you will get all the date in the given Period:
If you still have any problem, please feel free to ask.
Regards
Vicky Liu -
How to get the data from a cluster table to BW
Dear All,
I want to extract the data from R/3 to BW by using 2 tables and one Cluster B2.
Actually my report contains some fields from PA2001, PA2002 and one cluster table B2 (Table ZES). Can I create View by using these 3 tables? If it is not possible how can I get the data from the cluster? Can I create generic datasource by using cluster tables directly?
In SE11 Transaction the Cluster (table ZES) is showing invalid table.
I referred some Forums, but no use.
Can any body tell me procedure to get the data from a cluster (table ZES) ?
Waiting for you results.
Thanks and regards
RajeshHI Siggi,
Thank you for your reply..
I am also planning to do FM to get the data. But it is saying that the Cluster table ZES does not exist (ZES is the the standard table, in SE11 also).
How can I use the Fields from the that table.?
What can I do now, can you please explain me about this point.
Waiting for your reply.
Thanks and Regards
Rajesh
Message was edited by:
rajesh -
Why do we get the data from a view to a report.
hi
why do we get the data from a view to a report. is it possible to get the data from a view in all the cases?hi Jyotssna,
Suppose you are planning to get the data from multiple tables then you got to specify seveal condtions and make use of joins which results in poor performance in fetching the data . In order to improve the performance we make use of views where the conditions of different tables are defined and the data is fetched accordingly.
Regards,
Santosh -
My wife bought an iPad Air and synced contact from our PC (Outlook), now all our contacts in Outlook have gone and we have to go to iCloud to get them, and even then they are a bit jumbled. How do I get my data back onto my PC?
If you can see the iCloud contacts in Outlook, you can copy them back to your PC by selecting all the contacts (click one, then press Control-A), then drag and drop the selected contacts to Contacts under My Contacts on the left sidebar of Outlook.
If you want to copy your calendar back to Outlook, select your iCloud calendar on the left sidebar of Outlook, switch to the list view (select View from the ribbon, then click Change View>List), select your events (click on a single event, then press Control-A), then control drag and drop them to Calendar under My Calendars on the left sidebar.
Then you can sign out of iCloud on the iCloud control panel and your local copies will still be there. If you want to add your iCloud email account back to iCloud, you can do this with these settings: http://support.apple.com/kb/HT4864. -
i recently lost my iphone4 and erased all my data, then i found it... how do i get my data back
Your data should be on your computer.
-
If someone has wiped my ipad and changed passwords on icloud how do i get my data back
if someone has wiped my ipad and changed passwords on icloud how do i get my data back? please could someone help me out thanks
How did they wipe it? By using Find My iPad and performing a wipe? If so, that means they have your icloud ID and password, not a good thing.
You could try connecting it to iTunes and performing a restore from iCloud. But if they changed password, then you are out of the loop. How did they get your password in order to change it? -
I backed up my ipod. I then updated it but all of my data is still gone. How do I get my data back??
Were the app in your iTunes library? If not the app data in the backup has no place to go. Redownload the apps in your iTunes libaray
Downloading past purchases from the App Store, iBookstore, and iTunes Store
and then restore from backup.
iOS: How to back up and restore your content
Otherwise, try restoring from backup again.
If still problem that means the backup does not include the data. -
How do i get my data back if i restored my ipod touch
how do i get my data back if i restored my ipod touch
The backup that iTunes makes does not include synced media like apps and music.
Redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
and then restore from the same backup again. -
How do I get my data out of Keeper HD after updating iOS 7.1
Recently I updated my iPad to iOS 7.1 and now my free Keeper HD won't open so I can get my data out.Keeper support say they can't assist
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Delete the app and redownload.
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
Cheers, Tom
Maybe you are looking for
-
Hi guys, I might be a little early with the question, but actually its something which will bug us all at some point. Windows 8 METRO apps. On tablets the metro interface will not support the flash plugin on websites, so we cannot have flash apps on
-
How can I bring an UIAnnotationView to the front of a MKMapView ?
Hello! My MkMapView has a layer with special buttons. Hence, my MapView has some UIAnnotationViews. The problem: The UIAnnotationViews are not at the top-layer, but under the buttonLayer of my MapView. how can I fix this? thx alex
-
How do I use a JProgressBar to monitor the loading of a file ?
How do I let the progress bar tell how much it has finished the reading so far ?? Thanks !!!
-
Change properties of controls in an array of clusters
Hello, my latest problem: i display larga amount of data using arrays of clusters. the user has to be able to inserst clusters in between, therefore the array solution seems perfect. However, for each cluster, once a sub-control is defined, i would l
-
GPO Deploy Reader 9.3 and remove earlier version fails
Hi I am deploying Reader 9.3 with a mst from the Customization Wizard using a GPO. Basically this works perfect with the following exception: - I can not select to remove older versions in the Customization Wizard, its grayed out How do I manage to c