Get c: drive and ram full used

After Anna Upgrade, and after fresh boot, the available RAM in my N8 reduces from 136Mb to 120Mb.  I really believe more RAM in Nokia phone is the ultimate necessity to operate the phone smoothly without hanging during playing.  Can I have the RAM back?
Similarly, c: drive space drop a lot after installing necessary system apps, for example, QT, few themes, Ovi Maps (3.6), etc, from 130Mb down to 80Mb.  I really want to save some for caching, any coming important system app, buffer for photo-taking and video recording, etc, and really uncomfortable with no space left in c: drive in my working experience with symbian. 
Pls help to recover some valuable c: space and RAM.  

Make sure you install themes to mass memory or memory card, many apps install to C: unknown to the user, go into application manager and uninstall apps that are installed into C:, also go into file manager select the phone memory details and see where most of the memory is, might be sms msgs, if u have many, i realised mine was over 30 mb some time ago, i had to sync all to pc and delete most of em
Nothing is as it seems
If I've helped , click the Star under my name

Similar Messages

  • New Hard Drive and RAM

    Hi all,
    This isn't a question, just thought some of you may be interested.
    After reaching a stage of rapidly diminishing hard drive space (mainly due to my new hobby of movie making)I was faced with a choice of expanding this Mac or buying a new one. After doing the sums, decided to bite the bullet and expand this one. I've added RAM in the past, but the thought of changing my hard drive was a bit daunting. Nevertheless, after downloading the instructions and reading this discussion group, I figured I could do it.
    I ordered a Seagate 320GB hard drive and another GB of RAM (Crucial), cost was less than AU$200, bought a new, magnetised screwdriver set and off I went.
    It was a breeze, in fact getting the back back on the iMac took me longer than actually installing the hard drive and RAM! The magnetised screwdriver was a godsend - don't attempt the job without one.
    I had followed Miriam's advice (thankyou) and used Super Duper to back up my original hard drive on my external drive and this is the only time I ran into problems. The first restore was a disaster and I ended up learning far more about prebindings than I really wanted, or needed, to know. Thanks to the folks over at the Tiger Discussion group, I eventually succeeded in restoring correctly. Lesson learnt - read the manual! <edited by host>
    I'm planning on getting an external case for my old hard drive and keeping it as a 'just in case', the 2 x 256 sticks of RAM will probably be sold on ebay.
    So, if you are still wondering how hard the job is, take it from me (who will never see her 60th birthday again), by following the instructions it is a piece of cake. I now hope to get another 3 years out of this computer and when it finally dies, I will buy another one as I have been for almost 20 years, my first Mac was a Plus.
    Cheers
    NikkiG

    Up till the iSight, Apple made computers which were easily serviceable by their owner...
    ?? What about the 128k, 512k, 512ke, plus, se (all flavors), iMac G3, iMac G4, eMac, Mac mini, laptops, iPod, Newton, etc.?
    Really the only Apple devices that Apple expects you to completely disassemble and replace internal parts are the devices targeted for professionals (Mac Pro, Power Mac, etc.).

  • Upgrade MacBook - Hard Drive and RAM

    I want to upgrade my daughter's early 2008 white MacBook - both internal drive and RAM.  I know how to install both and have done so before.  I have purchased the internal drive, the RAM and a large external drive for Time Machine backups now and for the future.  I also want to install Lion.  I'm not sure of the sequence...  Here is what I propose:
    1) format the new external hard drive and then back up the current internal drive using Time Machine.
    2) install the new RAM.
    3) install the new internal drive.
    4) boot up using Snow Leopard DVD.  Install OS 10.6
    5) upgrade to 10.6.8
    6) install Lion.
    7) import all of her applications, files, etc. from the Time Machine backup.
    8) done?
    Is this correct - will all work?
    9) back up the new internal drive using Time Machine.
    Will step #9 work when I select "Back Up Now" from the Time Machine?
    10) If yes, is her itunes account, etc. ready to use?  Can she sync iphone as before? 
    Thanks.

    I can make this easier for you:
    1) Download and install SuperDuper.
    2) Using SuperDuper, make a clone of the current internal drive to the large external.
    3) Test the clone by booting to the external drive
    4) If good, install the new internal drive.
    5) Boot from external, and use SuperDuper in reverse (clone back to new internal).
    6) When done, boot the mac normally.  Upgrade to Lion, and all should be good.

  • Pavillion DV8-1250ea: Upgrading Hard Drive and RAM

    Hi,
    I want to upgrade the hard drive and RAM on my Pavillion DV8-1250ea.
    I want to know what spec/type of Hard drive and RAM i need to buy.
    For the hard drives i'm looking at either:
    Seagate 750GB Momentus 7200RPM SATA-300 16MB 2.5"
    Western Digital 750GB Scorpio Black 2.5" SATA-300 7200RPM 16MB
    Are these compatible?
    I would prefer if i could get 1tb but can't find one with 7200RMB. Any recommendations?
    For RAM i'm a little more lost. What spec do i need to look for? I believe 8GB is the max my laptop can handle, is this right?
    Thanks

    Hi:
    I can't help you with the hard drive questions but here is the link to the specs for your notebook:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02433096&tmp_task=prodinfoCategory&lc=en&dlc=en...=
    I can take up to 8 GB of DDR3 memory.  You MUST be running a 64 bit operating system to benefit from 8 GB of memory.
    You will need memory with this specification if you want 8 GB:
    Module Size: 8GB Kit (4GBx2)
    Package: 204-pin SODIMM
    Feature: DDR3 PC3-10600
    Specs: DDR3 PC3-10600 • CL=9 • Unbuffered • NON-ECC • DDR3-1333 • 1.5V • 512Meg x 64 •
    I recommend getting Crucial brand memory.
    The cheapest place I know of to buy this if you live in the USA or Canada is here:
    The link shows they are currently out of stock at the moment however.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820148345
    Paul

  • Hard drive and Ram switch

    Can I add the hard drive and ram of a dual usb ibook to a clamshell ibook?

    The hard drive will work.
    The RAM may work but some PC133 RAM will not work at 66 MHz (the bus speed of the clamshell).

  • HI, I HAVE A MacBook Pro 2.3GHz dual-core Intel i5 AND I WAN'T TO UPGRADE THE HARD DRIVE UP TO 750GB AND ALSO THE RAM MEMORY TO 8GB. WHAT SPECIFIC MODEL OF HARD DRIVE AND RAM MEMORY SHOULD I BUY??? THANKS

    HI, I HAVE A MacBook Pro 2.3GHz dual-core Intel i5 AND I WAN'T TO UPGRADE THE HARD DRIVE UP TO 750GB AND ALSO THE RAM MEMORY TO 8GB. WHAT SPECIFIC MODEL OF HARD DRIVE AND RAM MEMORY SHOULD I BUY??? THANKS

    No need to type in all caps - we HEAR you!
    I would take a look at the internal drives offered by both Crucial (click the link "Internal Hard Drives Now Available") and OWC. I would stay away from Western Digital drives as they seem to have problems on a number of Mac models.
    You can also shop for RAM at Crucial and OWC - just select the System Scanner tab at the Crucial website to find out which memory is right for your machine.
    Good luck,
    Clinton

  • Does it void my warranty to upgrade the hard drive and ram in a MacBook?

    Recently a new store in my local mall called Peachmac opened. They do repairs and upgrades. I went there to see about a hard drive and RAM upgrade. They told me if I do it myself, it voids the warranty. I have about 8 months of Apple care left on my Mac and don't want to loose it. My real question is does it void your warranty even though the instruction booklet specifically tells you how to do it? The reason I'm wondering this is because they want $69 an hour plus money for parts. They quoted around $125-$150 (for a 500GB HD and 4GB of RAM). Is this an ok deal? Or should I go for an SSD? I saw Crucial was doing a bundle for a 128GB SSD and 4GB of RAM at my local CompUSA. Which one is a better deal? Thanks!

    If you replace the memory, it doesn't void your warranty, but the warranty will be voided if you replace the hard drive

  • Questions regarding Hard Drive and RAM upgrade

    I just purchased a Macbook white (Late 2006 model) for my son off ebay. I know next to nothing about hard drives and RAM.
    I only paid $400 for this thing so I'm willing to put some extra cash into it.
    What is the maximum hard drive I can put in this thing? Also, does the size of the hard drive depend on the amount of RAM I can put in it?
    Like I said, I dont know very much about this stuff at all. Could someone please give me specific examples of the size hard drive & RAM I can put in.
    Thank you.

    Replacing the Hard Drive and RAM is very easy. Apple has a PDF file with instructions for replacing a hard drive and RAM. You'll need a #0 phillips screwdriver for the "L" bracket and a Torx 6 driver for the caddy screws.
    http://manuals.info.apple.com/en/MacBook13inch_HardDriveDIY.pdf
    http://manuals.info.apple.com/enUS/MacBook_13inch_MemoryDIY.pdf

  • Replacing Hard Driver and RAM

    Is it okay to replace the Internal Hard Drive and RAM at the same time? Also, once I replace the hardware how do I restore my last Time Capsule Backup to the new hard drive?

    Hello Jason Castellani -Usually best to do one major change at a time in case something goes wrong. That said I can see where you are going here once you got your MBP apart. If you are a gambling man go for both, esp if you have done the procedures before and comfortable with the operation.
    See this knowledge base article for your migration question.
    http://support.apple.com/kb/HT1177
    Hope this helps
    Message was edited by: leroydouglas

  • I can not get any updates and therefor not use Java as it only run updates for Mac 10.7. and later? How do i get the updates to install and use Java?

    I can not get ny updates and therefore not use Java, as it only run updates for MAC 10.7. and later. How do i get the updates to install and use JAVA ?

    In Snow Leopard you update Java from Software Update (in the Apple menu). You can check your version by opening Terminal and typing
    java -version
    (don't get creative and type anything else)
    The latest version is 1.6.0_65.

  • HT5446 If I buy a mac mini with a fusion drive and add windows using boot camp, can I make the SSD function be dedicated to the windows partition?

    If I buy a mac mini with a fusion drive and add windows using boot camp, can I make the SSD function be dedicated to the windows partition?

    Additional information from Linc's post. Basically, only one additional partition can be added to a Fusion Drive and it resides on the HDD.
    Do computers that come with a Fusion Drive support Boot Camp?
    Yes. Use the Boot Camp Assistant to create a Windows partition and install Boot Camp. The Windows partition will exist on the hard disk drive, not the Flash drive, and is not part of Fusion Drive Logical Volume Group. 3TB Fusion Drive configurations need to update to OS X Mountain Lion v10.8.3 or later to install Windows 8. See iMac (27-inch, Late 2012): Boot Camp alert with 3T hard drive for more information.

  • How can i get the driver and software for q1342a laser printer 1000

    How can i get a driver and software Cd for HP Laserjet 1000 S/N#CNBJ242828
    Product ID# Q1342A

    The product you have seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You may find the Commercial Laserjet board here.
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Hope this helps!
    Help the community by marking this post as a solution if it solved your issue!.
    If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

  • Hard Drive and Ram Memory for Pavilion dv6-6123cl

    Good morning! I want to change my ram and my hard drive. The ram will be 8GB and 2TB drive, I wonder if I used the hard drive, if supported? and as for the ram if I have to buy one that is compatible or anybody served me?
    Thank you! : smileywink:
    This question was solved.
    View Solution.

    Here is the Manual:
    Service Manual
    Are you located in the U.S.? If not, where? Country only is enough so we can link you to a source for hard drive and memory. 
    Page 62 for the hard drive and 66 for the Memory. 
    You need to open the memory door and see if you have one 4 gig stick or 2 x 2. If you have 1 x 4 you just need to get another to have 8. If you have 2 x 2 you need to get 2 x 4. 
    You need DDR3-1333 mhz SO-DIMM memory and you need a 2.5 inch wide 9.5 mm thick SATA hard drive. 2 TB drives are not really available in the market. 1 TB is about as big as you are going to find out there. 
    Post back with your country of residence and we can link you to a good online store. If your hard drive is working well right now you need to use the HP Recovery manager to burn recovery DVDs to put software on the new drive. 
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • HP 530 notebook PC - hard drive and RAM upgrade

    Hello, I'm using HP 530 and I want to upgrade it's hard drive.
    In documentation specified that my notebook supports only 80/120Gb hard drives and up to 2Gb RAM.
    Is it true? Can't i use more capacious HDD or RAM.
    And what type of HDD i should by? Is it compatible with SATA2 2,5" drives?
    I have model with Intel 945GME chipset (p/n ke666aa#acb)
    PS: sorry for bad english
    UPD:
    Thank you very much for answers!
    Yesterday I plugged 2Gb RAM module and with existing 1Gb module I get 3Gb RAM and it works fine.
    Also I replaced my hard drive with SATA2 500Gb 7200rpm drive and it wotks fine too!
    This question was solved.
    View Solution.

    >> Is there any real limitations of HDD size for my HP 530?
    No, you can bet bigger HDD for (it uses SATA HDD)
    BH
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • MacBook Pro 17" Hard Drive and RAM suggestions

    Hi, I want to but the new 17" MacBook Pro with 3.06GHz processor.
    I am still unsure whether to choose 4GB or 8GB RAM as well as whether to choose SSD or HDD.
    This MacBook will be used to develop iPhone apps, so I would want to have it speedy. On the other hand, I do not want to pay very much extra to get a slight noticeable improvement in speed. What I mean by this is that if 4GB of RAM is more than enough to develop apps then I will most likely not see a huge difference between having 8GB or 4GB of RAM.
    I would appreciate to hear some opinions about both SSD and RAM size and whether it is wise to upgrade considering current prices.
    Thanks in advance,
    P.S. I want to order Antiglare film. Does anyone know about any of its disadvantages, or is it a pure benefit?

    For what you described you want to do, 4GB RAM is plenty, and a fast 7200 RPM drive is fine. As for the anti-glare, if you don't want the distraction of sometimes having to see light sources behind you or reflections, get the anti-glare. The glass/glossy screen has more vibrant colors and deeper blacks, but you will get some reflection some time. Your eyes learn to ignore that quite quickly, but some people don't like it.
    Unless you're doing heavily intensive app development, and maybe doing video/audio, 8GB is not worth it, and the SSD is even more not worth it. iPhone apps are not that demanding in terms of pure power.
    Bryan

Maybe you are looking for

  • Oracle Rdb Driver 3.1.0.0 problem with blobs

    I am trying to convert an MsAccess application to use an MsAccess front end and an Oracle Rdb back end. I've created the test database under VMS and can successfully link to the Oracle Rdb tables from MSAccess 2000. One of the main reasons for conver

  • Inserting data from a view

    Hi: i'd like to create a view from 5 different tables and let the user insert data through a form based in that view. Does anybody know how to do this? when i try to insert data i get error saying it can't be done in non key preserved tables. Any ide

  • Items In Library, Not Available On iPod

    I posted a few days ago about this, but the post is now so buried below it is unlikely to be seen, so here we go again with a new post. I hope this is more acceptable than "bumping" the other post up. My iPod recently updated itself when plugged in,

  • Class library in a web app and config files

    I built some class libraries and included them in a web project. Where do I put configuration files so the class library can access them? no matter where I put it, i keep getting file not found. What I've been doing is having a JSP read the config de

  • Show Custom Attributes of GP Tasks in the Universal Worklist

    Hello, I have created a GP Process and i can see and execute its task in the universal worklist. But it only shows standart propertys like : Process,From, Sent, Due, Status. I want to add Custom specific task propertys, but i couldn`t find the way. R