Get Conditions for Service sub positions
Hello , i use a purchase order form this FM RV_PRICE_PRINT_ITEM to get conditions of position but in case of service position which have sub-position with they own conditions i can't find how get that conditions y search the tables konp,konh, KONV
but i don't find a way to get the data for sub-position of services any idea about this ?
Thanks.
We used Badi - BBP_CREATE_REQ_BACK para agrupar posiciones
Similar Messages
-
Conditions for service price determination incomplete
Hi All,
While doing the VA11 through SD-BOS, I am getting the following.
Conditions for service price determination incomplete
Message no. SE477
Diagnosis
Either the calculation schema for services does not exist or the condition types have not been defined correctly.
Procedure
Please check your Customizing settings for service conditions.
If you have not yet defined any conditions for services, you can adopt the standard SAP settings from client 0.
Please let me know did you anyone got the same kind of error.
Thanks,
Suresh.Hi All,
Thank you very much for your inputs.
I checked all the notes, 25357, 27024 and 1383066. Everything is ok in the system. and these notes explained more on the MM part not on the SD- BOS. However, still i am not able to complete the Inquiry, same error exists.
This error is in SD not in MM, while i am creating the inquiry BOS.
If any one come across it and solved it, please let me know.
Regards,
Suresh -
The Condition for service price determination incomplete
Dear experts,
I run the System with EC&O Best Practice. Howerver, I can not enter Services on tab Service of Sales Order: Short text of Service, Quantity, UOM, Gross Price. the error "Condition for service price determination incomplete" occours when I press Enter key.
Conditions for service price determination incomplete
Message no. SE477
Diagnosis
Either the calculation schema for services does not exist or the condition types have not been defined correctly.
Procedure
Please check your Customizing settings for service conditions.
If you have not yet defined any conditions for services, you can adopt the standard SAP settings from client 0.
Please help me check this issue on the attached file.
Thank you very much.
Thanks,
Binh Tran
<Personal details shared by OP is removed by Moderator. >
Message was edited by: Jyoti PrakashHi All,
Thank you very much for your inputs.
I checked all the notes, 25357, 27024 and 1383066. Everything is ok in the system. and these notes explained more on the MM part not on the SD- BOS. However, still i am not able to complete the Inquiry, same error exists.
This error is in SD not in MM, while i am creating the inquiry BOS.
If any one come across it and solved it, please let me know.
Regards,
Suresh -
How to update CONDITIONS for SERVICES in ME51N, ME52N.
Hi All,
My requirement is to update the CONDITIONS for SERVICES for the transaction ME51N, ME52N. I'm using BAPI_REQUISITION_CREATE to create the Purchase Requisition.
Thanks.Hi Swetha,
u will definitely update the condition and services by using the bapi
*BAPIREQUISITION_CREATE*_
with regards,
Kiran.G -
Org unit is not getting defaulted for the selected position in infotype0001
Org unit is not getting defaulted for the selected position in infotype 0001 during the hiring action.
In OM Org. units and positions have been created.
The Org. unit to Position relationship is also created.
But inspite of this, In infotype 0001, the after selecting a position, the Org unit is still getting defaulted to "00000000" instead of the Org. unit Id to which the position belongs. (Please note: At the time of selecting the position, I do structure search and the position is shown under the correct Or. unit)
Have I missed any step?Have u run the RHINTE programmes properly ?
are u able to save the record?
As some times it may be display probolem, if u r able to save the record then check the relationship in pp10/po13.
and U have not answered what Mr. Valeri is asking about your Implementation/support because these type we come accress if data is not uploaded properly.
Regards
vinmax -
How can i maintain conditions for vendor sub-ranges
Hi All,
How can i maintain conditions for vendor sub-ranges. These conditions apply to all materials from vendor's sub-range.
Eg: vendor X has the two subranges R1 & R2. I want to maintain separate conditions for R1 & R2. When ever i created PO with ref to particular subrange that Vendor conditions has to be appeared.
How can i achieve this?
Could u pls suggest?
Thanks & Regards
Anilkumar DalaiHi,
First Create a Condition Table with field "Vendor sub-range" in M/03
Then create an Access Sequence using this Condition Table in M/07
Then assign this Access Sequence in the Gross Price Condition Type in M/06
Then assign this Condition type in Calculation Schema in M/08
Then maintain condition record for this condition type in MEK1
And then select the appropriate VSR Code in ME21N and check the Pricing. -
Conditions for service price determination is incomplete.
Dear Gurus,
I am facing an error in Bill of services like "Conditions for service price determination is incomplete".In bill of services when am trying to enter the services in service entry sheet the system through the above errorr.S o can any one rspond immediately.
Thanks in advance
RamsHey
While creating Service PO
mainatain account assignment category
Maintain item category
Then enter the material description.
Automatically service tab will populate.
In this maintain service no ( the same can be created in AC03)
For the service maintain the conditions in ML33 or ML39 or ML45
Then create PO, The conditions will come automatically.
Regards,
Raman -
Conditions for service contract
hello,
I am creating service contract containing one line item ( i.e.activity) and no. of services in that line item. in the change mode i wanna put some condition on the activity level but not on service code level, but system is not showing the condtion in change mode. for activity level . pls adviceHi,
For service contract you can not assign any condition type.
You can assign at service level.
Hope it will help you.
Regards,
Manish Agarwal -
Get claims for service using Windows validation
I have the following code which was validation using username & password. How can I use Windows credentials instead?
private static SecurityToken GetClaims(string serviceurl, string username, string password)
bool isincurrentusercontext = String.IsNullOrEmpty(username);
WS2007HttpBinding binding = new WS2007HttpBinding();
binding.Security.Mode = SecurityMode.TransportWithMessageCredential;
binding.Security.Message.EstablishSecurityContext = false;
EndpointAddress endpoint = new EndpointAddress(new Uri(GetStsUrl(isincurrentusercontext)));
WSTrustChannelFactory trustChannelFactory;
if (!isincurrentusercontext)
binding.Security.Transport.ClientCredentialType = HttpClientCredentialType.None;
binding.Security.Message.ClientCredentialType = MessageCredentialType.UserName;
trustChannelFactory = new WSTrustChannelFactory(binding, endpoint);
trustChannelFactory.Credentials.UserName.UserName = username;
trustChannelFactory.Credentials.UserName.Password = password;
else
trustChannelFactory = new WSTrustChannelFactory(new KerberosWSTrustBinding(SecurityMode.TransportWithMessageCredential), endpoint);
trustChannelFactory.TrustVersion = TrustVersion.WSTrust13;
trustChannelFactory.Credentials.UseIdentityConfiguration = true;
WSTrustChannel channel = null;
RequestSecurityToken rst = new RequestSecurityToken(RequestTypes.Issue);
rst.AppliesTo = new EndpointReference(serviceurl);
rst.KeyType = KeyTypes.Bearer;
channel = (WSTrustChannel)trustChannelFactory.CreateChannel();
SecurityToken token = channel.Issue(rst);
((IChannel)channel).Close();
channel = null;
trustChannelFactory.Close();
trustChannelFactory = null;
return token;
If I change credential type from username to Windows,
binding.Security.Message.ClientCredentialType = MessageCredentialType.Windows;
and remove these two statements,
trustChannelFactory.Credentials.UserName.UserName = username;
trustChannelFactory.Credentials.UserName.Password = password;
and when i try to get the token,
SecurityToken token = channel.Issue(rst);
I get the following error,
"Secure
channel cannot be opened because security negotiation with the remote endpoint has failed. This may be due to absent or incorrectly specified EndpointIdentity in the EndpointAddress used to create the channel. Please verify the EndpointIdentity specified or
implied by the EndpointAddress correctly identifies the remote endpoint"Hi,
For Client configuration, in order for the service-client communication to work we need to specify the security type and the ClientCredentialType. These settings must match the security settings in the service.
For more information, you could refer to:
http://www.felinesoft.com/blog/index.php/2014/02/securing-a-wcf-service-with-username-and-password-using-message-security-and-the-channel-factory-pattern/
Regards -
Contract data not getting copied for service ticket follow up complaint.
Hi Experts,
We are creating a complaint as a follow-up document to service ticket . But the contract data is not getting copied.
We contacted SAP and they told us that its a standard behavior .The reply is basically an SAP note
841830 - Contract data not copied to follow-up transaction
My question is is there a way to change this behavior using CRM_COPY_BADI ?
I tried to look for the method which I can implement to get the contract data in items, But I was not able get it .
Please suggest the way to get it working
Thanks in advance .
NavalPlease not that the contract determination works fine when creating a new complaint ... but when the I am trying to create a complaint from service ticket the item level contract determination is not working fine ...
We have configured that the contract should be determined at the item level only option `F`.
I checked in one of the sap document that this cant be achieved by standard .
http://help.sap.com/saphelp_crm70/helpdata/en/46/5cd7335bbd516fe10000000a114a6b/frameset.htmhttp://help.sap.com/saphelp_crm70/helpdata/en/46/5cd7335bbd516fe10000000a114a6b/frameset.htm
Is there a way we can put this code in the BADI eg; CRM_SERVICE_CONTRACT ?? Please note that there is already an implementation of CRM_SERVICE_CONTRACT which is working fine for new service document creation . -
Soap handlers not getting invoked for service control
Is it possible to attach soap handlers to the service control generated from a wsdl file.
The below link shows that we can add handlers to a service control but it doesn't work for me
http://e-docs.bea.com/workshop/docs81/doc/en/core/index.html
Below is the code I am using to declare the handler
* @jc:location http-url="https://rrad.carrierzone.com/rrad/server.php"
* @jc:wsdl file="#RRADServiceWsdl"
* @jc:handler callback="WebHostingHandler" operation="WebHostingHandler"
public interface rradsslControl extends com.bea.control.ControlExtension, com.bea.control.ServiceControl
Everything works perfect If I add a soap-handler to a webservice
Thanks,
SridharSridhar,
WLW doesn't support SOAP message handlers on messages that arrive via HTTP GET. If you are using the test console you need to use the Test XML page instead of the test form page
Additional info is available at http://e-docs.bea.com/workshop/docs81/doc/en/workshop/guide/getstarted/conSOAPHandlers.html
Also when referring to Workshop docs links, please use the URL listed at the bottom of the page. The URL from the browser address bar will also be http://e-docs.bea.com/workshop/docs81/doc/en/core/index.html
Cheers
Raj -
To get condition for payperiod 01.
Hi,
I need to build a scenerio while running the pay, the customizations while running the pay were performed in an user exit.
So in here i have biult a condition as mentioned below.
if 'payperiod = 01'.
process data.
else.
process data.
endif.
Could you please help me in getting this proper condition.
Thanks and regards,
chowdary.Hi,
Please check this topic: Re: IF condition in payroll schema
Cheers -
Report for Service price conditions in contracts esp. validity periods
Hi all
I need a report that will show validity periods against price conditions for services in a contract. Can't find anything through the menus, SAP Help, Google.
Is there something as standard or will I need to cobble something together? The report needs to display conditions and validity periods by service / contract.
Any ideas?
Regards
DavidHi
Thanks for those, I had already found and tried a couple of those transaction. For some reason, those transactions aren't returning any results. I can get results if I branch into the 'Conditon info' screen, but unfortunately in this case the actual service numbers aren't quoted.
Regards
David -
Hi, does anybody know a function, bapi or table where I can get the conditions for a item position in an sales order?
ThanksHi,
You can get the records from the table KONV.
Pass VBAK-KNUMV to KONV-KNUMV
VBAP-POSNR to KONV-KPOSN
Thanks,
Naren -
Invoice not updated for Service and limit items
Hi All,
For service and limit we are not able to see the invoice document in the "Related Documents" tab in the Purchase order.
For material I am able to find the entry in the tab but the invoice statistics data is not getting updated for service POu2019s and also for limit item POu2019s.
Found a note for the same : 1462644 - Empty statistics in PO in case of Extended Classic Scenario but it works only for material line items only.
Please let me know if any config change need to be made else if there is any SAP note that would resolve this issue.
Thanks in advance.
Regards,
CatherineA knowledge based article note was applied to resolve the issue.
Regards,
Catherine
Maybe you are looking for
-
The new hard drive is in - now what?
Hi everyone, Please bear with me. I've suddenly become possessed by the idea of taking apart a Mac and putting new stuff in there. I am a complete novice in this respect, but I figure everyone has to start somewhere, right? I've got an iBook G3 Clams
-
Gurus- My Query has 142 columns and I am trying to export the query output to a word document using RSCRM_BAPI. When I check the output file which I got through RSCRM_BAPI, it is truncating lot of columns. Is there any limitations with the columns if
-
MBPr screen and backlight logo will not turn on
Just need to confirm if it is a hardware fault with my screen. The screen and the Apple logo on the back cover will not power on even though my laptop will work fine with an external monitor, only thing is; is that the external monitor is not being d
-
Flash Crashes Windows 7 Enterprise Dell Convertable Tablet / Laptop
Greetings! I have recently recieved a new PC featuring Windows 7 enterprise. Flash refuses to work. I get what I like to call the cloudy screen of death, and IE/FireFox/Chrome simply close out. Does not matter what I do. I have tried installing sever
-
Hi, I really need some help, with my loved and lost musoc. I really need to get it back. I lost all my music after i trid to update my Iphone. Can anybody help me with this? Im really desperate and i really need som help with this. It would really sa