Get desired data from joining multiple tables

I have the following query which is returning some data.
SELECT i.IssueId, i.IssueDesc, i.MainRecId, a.PlantId
FROM Issues i INNER JOIN PlantPcontact pp ON i.SubmitterId = pp.PContactId
INNER JOIN Plant a ON a.PlantId = pp.PlantId
WHERE (a.PlantStatus = 1)
ORDER BY i.IssueId
I need to join i.MainRecId and a.PlantId from the results of this query with another table PlantDoc (pd) ON PDMainRecId and PDPlantId respectively (one-to-one relationship) and retrieve additional information (pd.PlantDocId).
How do I accomplish everything in one single query ?
I am looking for the following data finally.
i.IssueId, i.IssueDesc, i.MainRecId, a.PlantId, pd.PlantDocId

Example for JOINs with many tables:
http://www.sqlusa.com/bestpractices/fourtablejoin/
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Similar Messages

How to get the data from a cluster table to BW

Dear All,
I want to extract the data from R/3 to BW by using 2 tables and one Cluster B2.
Actually my report contains some fields from PA2001, PA2002 and one cluster table B2 (Table ZES). Can I create View by using these 3 tables? If it is not possible how can I get the data from the cluster? Can I create generic datasource by using cluster tables directly?
In SE11 Transaction the Cluster (table ZES) is showing invalid table.
I referred some Forums, but no use.
Can any body tell me procedure to get the data from a cluster (table ZES) ?
Waiting for you results.
Thanks and regards
Rajesh

HI Siggi,
Thank you for your reply..
I am also planning to do FM to get the data. But it is saying that the Cluster table ZES does not exist (ZES is the the standard table, in SE11 also).
How can I use the Fields from the that table.?
What can I do now, can you please explain me about this point.
Waiting for your reply.
Thanks and Regards
Rajesh
Message was edited by:
rajesh

Can we get the data from two internal tables in ALV.

hi friends i would like to display the data using two internal tables using alv grid.please guide me.

Hi,
ALV would be having a specific layout say :
MATNR
MAKTX
QTY
Now, if you have two internal tables, then do they have a different structure. If they have different structures, then what kind of ALV layout you expect. The ALV output should be as per the structure of 1st or 2nd internal table.
If both internal table have same layout, then populate the data from 2nd internal table into 1st internal table and pass the 1st internal table ( it will have data of both internal tables) to ALV.
Best regards,
Prashant

Getting same data from two diffrent tables

Select * from events where job_dtls_id IN (select job_dtls_id from job_details where job_no='' and consignment_id='' and carrier_reference='');
Hello All,
I have to retrieve job_dtls_id (query in brckets ) in which it will match the above shown criteria (job_no,consignment_id and carrier_reference).
but the problem is job_no And consignment_id are in one table and carrier_reference is in another.
the two table have relation on job_dtls_id.
Do anybody have an Idea please Help.
Thanks.

Hi Nilesh,
As suggested by John, having JOIN on the tables should give you the desired output and have it saved as stored procedure and invoke it from BizTalk, have a look at following post for reference: http://tech-findings.blogspot.com/2013/08/polling-data-from-sql-using-wcf-sql.html
Maheshkumar
S Tiwari|User
Page|Blog|How
to Access an Orchestration variable in Map

How to get common datas from two int.tables

hi,
please tell me , how to i will get the common datas between two int. tables
& place them in third int. table.
give me syntax.
regards
subhasis.

Hi Subhasis,
<b>SORT :</b></u>
SORT itab.
Extras:
1. ... BY f1 f2 ... fn
2. ... ASCENDING
3. ... DESCENDING
4. ... AS TEXT
5. ... STABLE
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Field symbols not allowed as sort criterion.
Effect
The entries in the internal table are sorted in ascending order using the key from the table definition (DATA, TYPES).
Addition 1
... BY f1 f2 ... fn
Effect
Uses the sort key defined by the sub-fields f1, f2, ..., fn of the table itab instead of the table key. The fields can be of any type; even number fields and tables are allowed.
You can also specify the sort fields dynamically in the form (name). If name is blank at runtime, the sort field is ignored. If itab is a table with a header line, you can also use a field symbol pointing to the header line of itab as a dynamic sort criterion. A field symbol that is not assigned is ignored. If a field symbol is assigned, but does not point to the header line of the internal table, a runtime error occurs.
If the line type of the internal table contains object reference variables as components, or the entire line type is a reference variable, you can use the attributes of the object to which a reference is pointing in a line as sort criteria (see Attributes of Objects as the Key of an Internal Table.
You can address the entire line of an internal table as the key using the pseudocomponent TABLE_LINE. This is particularly relevant for tables with a non-structured line type when you want to address the whole line as the key of the table (see also Pseudocomponent TABLE_LINE With Internal Tables).
If you use one of the additions 2 to 5 before BY, it applies to all fields of the sort key by default. You can also specify these additions after each individual sort field f1, f2, ..., fn. For each key field, this defines an individual sort rule which overrides the default.
Addition 2
... ASCENDING
Effect
Sorts in ascending order. This is also the default if no sort order is specified directly after SORT. For this reason, it is not necessary to specify ASCENDING explicitly as the default sort order.
With the addition BY, you can also specify ASCENDING directly after a sort field to define ascending order explicitly as the sort sequence for this field.
Addition 3
... DESCENDING
Effect
Sorts in descending order. If the addition comes right after SORT, DESCENDING is taken as the default for all fields of the sort key.
With the addition BY, you can also specify DESCENDING directly after a sort field.
Addition 4
... AS TEXT
Effect
Text fields are sorted appropriate to the locale. This means that the relative order of characters is defined according to the text environment being used.
When an internal mode is opened (in other words, when a roll area is opened), the text environment is automatically set to the logon language specified in the user master record. If necessary, however, you can change the text environment explicitly in your program by using a SET-LOCALE statement.
If the addition comes directly after itab, locale-specific rules are used for all fields of the sort key where the type of these fields is C or W. After the sort, the sequence of entries usually does not match the sequence which results otherwise, without using the addition AS TEXT, i.e. with binary sorting.
With the addition BY, you can also specify AS TEXT directly after a sort field, provided it is of type C or W, or a structured type. Otherwise, a runtime error occurs. In sort fields with a structured type, AS TEXT only affects subcomponents with type C or W.
In case of an invalid character, a SYSLOG message is written, and the respective record is inserted at the end.
Note
Please keep the rules for site-specific sorting in mind.
Example
Sort a name table with different keys:
TYPES: BEGIN OF PERSON_TYPE,
         NAME(10)   TYPE C,
         AGE        TYPE I,
         COUNTRY(3) TYPE C,
       END OF PERSON_TYPE.
DATA: PERSON TYPE STANDARD TABLE OF PERSON_TYPE WITH
                  NON-UNIQUE DEFAULT KEY INITIAL SIZE 5,
      WA_PERSON TYPE PERSON_TYPE.
WA_PERSON-NAME    = 'Muller'. WA_PERSON-AGE = 22.
WA_PERSON-COUNTRY = 'USA'.
APPEND WA_PERSON TO PERSON.
WA_PERSON-NAME    = 'Moller'. WA_PERSON-AGE = 25.
WA_PERSON-COUNTRY = 'FRG'.
APPEND WA_PERSON TO PERSON.
WA_PERSON-NAME    = 'Möller'. WA_PERSON-AGE = 22.
WA_PERSON-COUNTRY = 'USA'.
APPEND WA_PERSON TO PERSON.
WA_PERSON-NAME    = 'Miller'. WA_PERSON-AGE = 23.
WA_PERSON-COUNTRY = 'USA'.
APPEND WA_PERSON TO PERSON.
SORT PERSON.
Now, the sequence of the table entries is as follows:
Miller 23 USA
Moller 25 FRG
Muller 22 USA
Möller 22 USA
If, for example, you apply German sort rules where the umlaut comes directly after the letter 'o' in the sort, the data record beginning with 'Möller' would not be in the right place in this sequence. It should come second.
Provided a German-language locale is set (e.g. sorting is according to German grammatical rules, see also SET LOCALE), you can sort the names according to German rules as follows:
SORT PERSON BY NAME AS TEXT.
Now, the sequence of table entries is as follows:
Miller 23 USA
Moller 25 FRG
Möller 22 USA
Muller 22 USA
Further examples:
SORT PERSON DESCENDING BY COUNTRY AGE NAME.
Now, the sequence of table entries is as follows:
Miller 23 USA
Möller 22 USA
Muller 22 USA
Moller 25 FRG
SORT PERSON DESCENDING BY AGE ASCENDING NAME AS TEXT.
Now, the sequence of table entries is as follows:
Muller 22 USA
Möller 22 USA
Miller 23 USA
Moller 25 FRG
Addition 5
... STABLE
Effect
Uses a stable sort, that is, the relative sequence of entries that have the same sort key remains unchanged.
Unlike additions 2 to 4, you cannot use this addition directly after a sort field.
Notes
General:
The number of sort fields is restricted to 250.
The sort process is only stable if you use the STABLE addition. Otherwise, a predefined sequence of fields used to sort a list is not usually retained.
It does not make sense to use the SORT command for a SORTED TABLE. If the table type is statically declared, the system returns a syntax error if you try to SORT the table. If the table type is not statically declared (for example, because the table was passed to a FORM routine as an INDEX TABLE in a parameter), and the system can interpret the SORT statement as an empty operation, it ignores the statement. This is the case when the key in the BY clause corresponds to the beginning of the table key. Otherwise, a runtime error occurs.
To delete all duplicate entries from a sorted internal table (e.g. just after SORT), you can use the DELETE ADJACENT DUPLICATES FROM itab statement.
When using the addition AS TEXT, the sequence of entries after the sort does not usually match the sequence resulting from a binary sort, i.e. if the addition AS TEXT is not specified. The consequence of this is that after the SORT, you are not allowed to access with the READ TABLE itab ... BINARY SEARCH statement.
If you still want to access data sorted apppropriate to the locale with a binary search, you can do this by including an additional component in the table where you can explictly store the data formatted using the CONVERT TEXT ... INTO SORTABLE CODE statement. This is also recommended for performance reasons if you have to re-sort the table several times according to locale-specific criteria.
If the internal table has more than 2^19 lines or is larger than 12 MB, the system sorts it physically using an external auxiliary file. You can specify the directory in which the file should be created using the SAP profile parameter DIR_SORTTMP. By default, the system uses the SAP data directory (SAP profile parameter DIR_DATA).
Notes
Performance:
The runtime required to sort an internal table increases with the number of entries and the length of the sort key.
Sorting an internal table with 100 entries with a 50 byte key requires about 1300 msn (standardized microseconds). Using a 30-byte key, the runtime is about 950 msn.
If one of the specified sort criteria is itself an internal table, SORT may sometimes take much longer.
The runtime increases if you use a stable sort.
Physical sorting reduces the runtime required for subsequent sequential processing.
Reward If Useful.
Regards,
Chitra

Help - Need to Get Max(Date) from An Unrelated Table in PowerPivot

I have two tables in my Power Pivot model:
Table A (a many table)
Asset
SerialNumber
User
CTUT111
YC112233
Bob
CTUT222
ZZ221144
Susy
CTUT222
ZZ221144
Larry
CTUT333
AB332244
Bob
Table B (a many table, a CSV import from another system)
Asset
SerialNumber
CheckIn_Date
CTUT111
YC112233
6/15/2014
CTUT111
YC112233
6/20/2014
CTUT222
ZZ221144
6/18/2014
CTUT333
AB332244
6/20/2014
I know it appears odd that Table B would have two entries for the same Asset (CTUT111), but it does.
I know I could write a SQL query that gave me the MAX(CheckIn_Date), but I’m not staging these datasets in a SQL server first.
I’m pulling directly from CSV tables.
I don’t want to have bridge tables either, if possible.
So, I’m left with a many-to-many situation in Power Pivot.
I want to add a Calculated Column to Table A, called ‘Latest CheckIn Date’ – which I get from Table B, matching on Serial Number.
So, when I’m done, I would expect the value for Asset=CTUT111 to be 6/20/2014 (since it’s the MAX of a value of dates)
I’m trying this pattern from Marco Russo in which you don’t need to relate two tables to exchange information, but it doesn’t appear to be working.
=CALCULATE (
MAX ( VALUES ( TableB[CheckIn_Date] ) ),
FILTER (
TableB,
'TableA'[SerialNumber]
= TableB[SerialNumber]
I’ve also tried to use LOOKUPVALUE, but I can’t seem to figure it out.
Would appreciate the help.
Thanks in advance.
-Eric

Hi Eric,
Please, try this one formula:
=CALCULATE (
MAXX ( VALUES( TableB[CheckIn_Date] ); TableB[CheckIn_Date] );
FILTER (
TableB;
'TableA'[SerialNumber] = TableB[SerialNumber]
P.S. In my locale I use ";". According to your locale you should use ",".
Truly yours,
Paul

Getting the system date from the dual table

Hi, im just wondering if anyone can help me. I need to get the current date to enter into a message table saying that an email has been sent and im struggling to find a way to get the date. Should i try to get this date from the dual table, if so how can i get this oracle date type out of the resultset? or is there some easy way in java to do this without accessing the database??
Thanks for any help
Sean

Date now = new Date();
is the easy Java way to get the current date and time.

How to get the data from multiple nodes to one table

Hi All,
How to get the data from multiple nodes to one table.examples nodes are like A B C D E relation also maintained
Regards,
Indra

HI Indra,
From Node A, get the values of the attributes as
lo_NodeA->GET_STATIC_ATTRIBUTES( IMPORTING STATIC_ATTRIBUTES = ls_attributesA ).
Similarily get all the node values from B, C, D and E.
Finally append all your ls records to the table.
Hope you are clear.
BR,
RAM.

How to get the data from multiple tabes into single table

hi all,
here i am having 10 data base tables,how to get the data into a single table.
regards,
subba reddy

hi,
non XI/PI related
Regards,
Michal Krawczyk

How to get the data from pcl2 cluster for TCRT table.

Hi frndz,
How to get the data from pcl2 cluster for tcrt table for us payroll.
Thanks in advance.
Harisumanth.Ch

PL take a look at the sample Program EXAMPLE_PNP_GET_PAYROLL in your system. There are numerous other ways to read payroll results.. Pl use the search forum option & you sure will get a lot of hits..
~Suresh

How to get the data from Pooled Table T157E.

Hi Experts,
How to get the data from Pooled Table T157E.
Any help.
Thanks in Advance,
Ur's Harsha.

create some internal table similar to T157E and pass all data as per SPRAS.
After that use internal table in your program as per the requirement.
Regds,
Anil

How to get the data from the model node like a table ?

I want to get the data from the model node once a record ,and the node is bound to a internal table in the RFM which I called in the R/3 system. Who can give me some advice to achive it?Thank you!!

Hi,
To get the data from the node:
wdContext.node[your node name].current[node name]_InputElement().get[specific element in the node];
or you van use:
wdContext.current[your node]Element().get[your element in the node];
examples:
wdContext.nodeZ_Mepro_Po_Detail_Stock_Distri_Input().currentZ_Mepro_Po_Detail_Stock_Distri_InputElement().getUcpd_Flag();
wdContext.currentT_Delv_ReqsElement().getShelflife();
regards,

How to get data from an internal table in some other program

I would like to get data from the internal table in the other program. When I using FM "LIST_FROM_MEMORY" to get the data, it doesn't work and the exception is not fount.
If any special code need in the other program, like write data to memory .
Many thx .
From Ross Wang

Hi
<li>You need to have interaction if you want to use EXPORT/IMPORT statments.
<li>The internal tables in both programs must be same
<li>Program one ..Calling program
REPORT ZTEST_NOTEPAD.
DATA: BEGIN OF it_t001 OCCURS 0,
        bukrs TYPE t001-bukrs,
        butxt TYPE t001-butxt,
      END OF it_t001.
START-OF-SELECTION.
SUBMIT ztest_notepad1 AND RETURN.
IMPORT it_t001 FROM MEMORY ID 'ZTEST_T100'.
LOOP AT it_t001.
    WRITE:/ it_t001.
ENDLOOP.
<li>Program two ...Called program
REPORT ztest_notepad1.
DATA: BEGIN OF it_t001 OCCURS 0,
        bukrs TYPE t001-bukrs,
        butxt TYPE t001-butxt,
      END OF it_t001.
START-OF-SELECTION.
SELECT * FROM t001 INTO CORRESPONDING FIELDS OF TABLE it_t001 UP TO 10 ROWS.
IF sy-dbcnt > 1.
    EXPORT it_t001 TO MEMORY ID 'ZTEST_T100'.
ENDIF.
I hope that it gets you some idea.
Thanks
Venkat.O

How to get data from hierachy lookup table

there is a hierachy lookup table A, and I want to get data from A.
but the following code does work properly:
WebTreeNode result = catalog..GetHierarchy(tableName,nodeID);
could anybody give some suggestion or solution of getting data from hierachy lookup table,
3x

Hi fei,
Please look at the following code.
I hope it will give you some clues...
private void showHierarchy() throws StringException
    ResultSetDefinition rsd = new ResultSetDefinition(<code name of your hierarchy table>);
    rsd.GetFields().Add(<code name of a field in your hierarchy table>);
    Search search = new Search(<code name of your main table>);
    WebTreeNode treeNode = catalogData.GetResultTree(search, rsd, 0);
    printHierNameRecursive(treeNode, 0);
private void printHierNameRecursive(WebTreeNode root, int level) throws StringException
    WebTreeNodeArray arr = root.GetChildren();
    for (int i = 0; i < arr.GetSize(); i++)
        for (int tab = 0; tab < level; tab++)
        System.out.print("t");
        String catName = arr.GetWebTreeNodeAt(i).GetValueAt(<code name of a field in your hierarchy table>).GetStringValue();
        System.out.println(catName);
        printHierNameRecursive(arr.GetWebTreeNodeAt(i), level + 1);
Regards,
Nir

I want to get data from only RESB table without loss of any deltas

i have to fetch the reservation details for the production orders.
we are using descrete manufacturing method to keep track the Work in process and cost .
for addition of components manually in the production order we can track thru change date i.e From AUFK table with field name AEDAT. for each time when we are adding the components the system will create a new line item In tableRESB-OBJNR(field)
i need very few fields from RESB table to be pulled into SAP BW.
how should i proceed creating a generic exractor without any loss of deltas.
i want to get data from only resb table into sap bw.
how should i proceed with Generice extractor with single table RESB and what would be the delta field . could any one throw some light .
all answers would be rewarded with points

I have few reports for BOM data is to be pull into bw
all the reports contain the same tables Mentione below
MAST- material to BOM LINK
STKO- BOM header
STPO- BOM ITEM
STAS- BOM ITEM SELECTION
how should i create ageneric datsource satisfying that all the data comes from these tables without fail of deltas,
my doubts.1. Do i have to create a separate data sources (generic) for all these individually and load into separate ODS'S AND CLUB THEM into single ODS further.?
if i create i dont know what should be delta field that has to be picked for each datasource
2. Do i have to create a view on all these tables and create a generic datasource.if created what would be the delta field i have to select.
could you pls let me know how should i pull the data without loosing any deltas
could you pls let me know the flow with delta fields mentioned
regards,
P

Get desired data from joining multiple tables

Similar Messages

Maybe you are looking for