Get disconnected from my Wi-Fi Every 5 Mins

I get disconnected from my Internet connection roughly every 5 minutes. Usually it comes back on after a couple of seconds which wouldn't usually be a problem but a certain app I use a lot requires a constant Internet connection and every time it disconnects I have to do a lot to get back to where I was.
It seems to be only the iPad that does this, I haven't noticed it on my laptop or ps3.
Anyone know what to do?

If resetting (or completely reinstalling) the iPad 1 doesn't help, you could master reset and, then, reconfigure the access point / install a new firmware (if any) on it. It might help. If it doesn't, get some other access point.
I've been using the iPad 1 with tons of different access points (mostly SMC and Linksys ones) and never had such a problem.
EDIT: BTW, why don't you update the iPad to 5.1.1? While 5.1.1 does have its share of problems on the iPad 1 because of the lack of RAM, it might still be better in this regard.

Similar Messages

Wireless Router WRT54G version 7. Connected computer gets disconnected from internet

I have recently installed a Wireless Router WRT54G version 7 for my home office purpose.
My home PC and my laptop are connected to it. Especially on my laptop, I have observed frequently getting disconnected from the internet. I need to power OFF the router and power it ON to get the internet connection restored
Need help to get this problem resolved
Thanks
Rohit

Access set up pageof router .... look for MTU ....change the size from 1500 to 1300 ....click save settings ....
Click on wireless tab ....change the channel to 11 .....click save settings ....
Go to advance wireless settings subtab ....
Beacon interval 75
RTS & Fragmentation threshold 2306...... click save settings ...
Click on status check Ip address & firmware version on the same & let me know ...

When a program gets disconnected from ORACLE?

Hi all,
I have written an proc program .I have to handle the disconnection from oracle in the
middle of a program.
Can any one tell me what are the majour/important cases in which a program gets disconnected from oracle and also how to test these cases.
Please help me in this regard ,
Thanks in advance,
Trinath Somanchi,
Hyderabad.

there is some OP report after Windows update Dec 2014 macro stop responding ( I cant confirm if this is also related to your issue) its because security update for Office maybe conflict with the active-x that you are installed
try to
Close Excel
Start Windows Explorer.
Select your system drive (usually C:)
Use the Search box to search for *.exd
Delete all the files it finds.
Start Excel again
Open that file and save it, and try open at Windows 7
to get more detail about this issue, I suggest also contact Office forum
this case also will be solve installing kb3025036
good luck

Why do I keep getting disconnected from Ichat?

why do I keep getting disconnected from Ichat?

Try logging on to AIM on port 443 rather than port 5190.
Go to IChat in the menu bar > Preferences > Accounts.
Log out of AIM and then use the Server Settings tab
Set the port to 443(press return/enter(you might have to tick and untick SSL for 443 to stick)).
Log back in again.

What is isp and why i keep getting disconnected from the internet every 10mins?

my internet keeps failing on me, and the isp is red then the rest is yellow only the 3 top wifi settings are green. i solve the problem by clicking on diagnostic but can only stay on the internet for less than 10 mins then get disconnected again. can anyone help me fix this problem permanently?

Connect your Ethernet cable from your modem to your computer, power the modem off/30 seconds/on and wait until it's powered up, then turn on your computer.
If you get kicked off again like that by your IPS at regular time frames (and WiFi is good), it usually means there is a problem on your end.
1: Malware
2: Excessive or exceeding monthly bandwidth allotment (it is Oct 26th)
3: Unpaid bills
4: Insecure network (others doing bad things, malware)
5: P2P files sharing, illegal device online
6: Important ISP email wating your attention for something important
7: Broken device (like a defective router) or another issue. Could be a lose wire blowing in the wind and disconnecting.
Process of elimination, calling your IPS resolves many of them, get a new router/modem, then you focus on if it's your computer, the router or lines from your house to the pole. If all that's clear, and others are reporting the same issue, then the ISP will come take a look at the wires in the neighborhood, send a tech to your house to check the lines/connections.

5508 - iPad getting disconnected from WLAN Using EAP-TLS

We are seeing an issue with an ipad connecting to a WLAN configured for EAP-TLS using ISE 1.2, getting disconnected. The ipad will hop top another SSID. It will connect back to the other ssid when selected. Any ideas? I have a debug client for when this happened.
*apfMsConnTask_0: Apr 08 14:03:57.508: Association request from the P2P Client Process P2P Ie and Upadte CB
*apfMsConnTask_7: Apr 08 14:04:57.855: Association request from the P2P Client Process P2P Ie and Upadte CB
*apfMsConnTask_5: Apr 08 14:05:17.345: 04:54:53:7b:9e:7a Association received from mobile on BSSID 54:78:1a:2f:84:56
*apfMsConnTask_5: Apr 08 14:05:17.345: 04:54:53:7b:9e:7a Global 200 Clients are allowed to AP radio
*apfMsConnTask_5: Apr 08 14:05:17.345: 04:54:53:7b:9e:7a Max Client Trap Threshold: 0 cur: 4
*apfMsConnTask_5: Apr 08 14:05:17.345: 04:54:53:7b:9e:7a Rf profile 600 Clients are allowed to AP wlan
*apfMsConnTask_5: Apr 08 14:05:17.346: 04:54:53:7b:9e:7a 172.30.230.213 RUN (20) Skipping TMP rule add
*apfMsConnTask_5: Apr 08 14:05:17.346: 04:54:53:7b:9e:7a apfMsRunStateDec
*apfMsConnTask_5: Apr 08 14:05:17.346: 04:54:53:7b:9e:7a 172.30.230.213 RUN (20) Change state to DHCP_REQD (7) last state RUN (20)
*apfMsConnTask_5: Apr 08 14:05:17.346: 04:54:53:7b:9e:7a 0.0.0.0 DHCP_REQD (7) State Update from Mobility-Complete to Mobility-Incomplete
*apfMsConnTask_5: Apr 08 14:05:17.346: 04:54:53:7b:9e:7a 0.0.0.0 DHCP_REQD (7) Reached ERROR: from line 6355
*apfMsConnTask_5: Apr 08 14:05:17.346: 04:54:53:7b:9e:7a pemApfDeleteMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
*apfMsConnTask_5: Apr 08 14:05:17.346: 04:54:53:7b:9e:7a 0.0.0.0 DHCP_REQD (7) Deleted mobile LWAPP rule on AP [54:78:1a:2f:84:50]
*apfMsConnTask_5: Apr 08 14:05:17.346: 04:54:53:7b:9e:7a Applying Interface policy on Mobile, role Unassociated. Ms NAC State 2 Quarantine Vlan 0 Access Vlan 730
*apfMsConnTask_5: Apr 08 14:05:17.346: 04:54:53:7b:9e:7a Re-applying interface policy for client
*apfMsConnTask_5: Apr 08 14:05:17.346: 04:54:53:7b:9e:7a 0.0.0.0 DHCP_REQD (7) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2018)
*apfMsConnTask_5: Apr 08 14:05:17.346: 04:54:53:7b:9e:7a 0.0.0.0 DHCP_REQD (7) Changing IPv6 ACL 'none' (ACL ID

Use profiles for the wifi settings on the iPad
A reset of network settings will clear the network history, but the profile will add it back in automatically
http://images.apple.com/ipad/business/docs/iOS_Deployment_Technical_Reference_EN_Feb14.pdf
Great Cisco doc for BP and troubleshooting of Apple devices:
Enterprise Best Practices for Apple Mobile Devices on Cisco ...
Make sure the app uses URIPersistWifi call
https://developer.apple.com/library/ios/documentation/iphone/conceptual/iphoneosprogrammingguide/PerformanceTuning/PerformanceTuning.html

Keep getting disconnected from Xbox 360

Evening all
I signed up to BT Infinity around 2 months ago after having Virgin for 4-5 years. I eventually chose to leave Virgin after a month period where the Broadband was horrendously slow. I decided to go with BT Infinity as they seemed good for gaming. I play my Xbox 360 quite often and (other than the last month of my contract) never had any issues on Virgin.
The first 10 days with BT Infinity were brlliant, the Internet was quick and I didn't have any problems. Unfortunately, after 10 days I started to randomly get kicked from games, lose connection to my Xbox Live party, etc. After a lot of trouble shooting:
- Port forwarding
- Giving my Xbox a static address
- Changing my Wireless channel
- Disabling UPnP
- Wired connection to my Xbox
was still no closer to finding the resolution. Usually after getting disconnected I'll do a connection test and will get a moderate NAT setting. I do these tests randomly and I'm constantly changing from Open to Moderate. I can only assume this is the reason for my problem. I should also mention that this doesn't only happen on one game but all games.
After having no luck, I decided to do a hard reset and see if that fixed the problem. After doing this, I was able to play with no problems for another 5-6 days before it all started again. I've now reset my router about 5 times and the same thing keeps reoccuring.
I can only assume the router (HH3 Type A) is the issue as I never had any problems with Virgin. I've just got off the phone with BT support where they did a few checks and eventually came to conclusion that my broadband/router are showing no errors so it must simply be my Xbox (even though I told them about the previous 4-5 years of no problems). I did ask BT to send me out another router to see if that was the issue but they simply refused.
I'm at a bit of a loss what to do next, I'm hoping someone on the forums has experienced a similar issue and has found a fix.
Thanks in advance for any help suggested!
Dave

Thanks guys.
I've filled out one of the forms above so hopefully someone from BT will get back to me.
With regards to the DSL light bradhughes, did the light only flash when you got disconnected? Everytime I look at the Modem/Router the lights all appear to be fine. I wouldn't be able to tell if it's happening when I'm disconnected though as they're in a different room to the Xbox.

RDS 2012 - Users sundely getting disconnected from their Session

Hi There,
At the moment my current setup is as follow.
1x 2012 R2 ( RDS01 = Web, Gateway, Licensing and Broker )
2x 2012 R2 ( RSH01 and RSH02 = Session Host )
I have changed our DNS zone so our users can user the same url remote.mycompany.com from internal and external. our internal domain is mycompany.local.
At the moment i have couple issues.
if i run ( http://gallery.technet.microsoft.com/Change-published-FQDN-for-2a029b80) to use remote.mycompany.com, the clients wont be able to launch any remoteapp. I have overcome this by creating two A records (RDSfarm.mycompany.com and pointing the
IP for Both session host then running the script to change to rdsfarm.mycompany.com) it works but users get certificate mismatch
User are getting disconnected suddenly without any warning, despite my session settings are set to never,
and going through event viewer, i can see the following.
The winlogon notification subscriber <Sens> failed a notification event. Event id 6001
The winlogon notification subscriber <TermSrv> failed a critical notification event. event id 004
any help will be very appreciated.
Thanks
Notle

Hi,
Thank you for posting in Windows Server Forum.
Any further update regarding your case?
In addition, you can refer below links for information.
1. Event ID 6004 — Windows Logon Availability
2. W7: User Profile
Service service failed at log on: Apparently W7 is no longer creating any user profile data other than username and picture.
Hope it helps!
Thanks.
Dharmesh Solanki

Why does my iphone keep getting disconnected from Wifi?

My laptop has no issue staying connected to my wifi, but my iphone 4 keeps getting disconnected. I connect to wifi then a few seconds later, it disconnects for some reason. My lapop doesn't seem to have this problem, but my iphone has been having this issue for some time now. I cannot load anything on my iphone because of this. I'm unable to go online for more than 3 seconds at a time, literally. HELP! I've resetted my network settings, forgot my network, and renewed lease on my settings, but I still haven't found a fix.

You are in a bad service area. Maybe you should think about switching carriers. Having bad service is not an iphone problem.

Modem disconnects from net only when using iPad Mini

Hi, I'm using TP-Link TD-W8951ND Modem, When I connect my iPad mini to it and start browsing internet or watching videos the modem disconnects from net. This problem doesn't happen when I do the same with my Android phone or laptop. I have reset both iPad and modem without any luck. This is very frustrating for me. Kindly Help!

this is solved by me
ill take the solution with me since no one offered any help..
thanks for all the hard work from black berry online and phone support

How do I get pictures from my computer to my iPad mini?

I am new to iPad (got my mini a week ago) and I am trying to figure out how to get pictures from my computer onto the mini...I am soooooooo confused right now! LOL
thanks in advance!
Lainee

Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
Since you are a new iPad user, here's some helpful info to get you started.
Complete guide to using iOS 6
http://howto.cnet.com/ios-6-complete-guide/
Guide to Built-In Apps on iOS
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
http://www.youtube.com/watch?v=YT2bD0-OqBM
http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

My Airport Extreme Disconnects From the Cable MoDem Every Few Minutes

Hello,
I start a new topic as my previous title was wrong and there was no suitable answer.
I have had an Airport Extreme for 3 years and it sometimes disconnects after a few minutes. Actually, it more looks like that the Airport crashes: the "PC Link" light on the cable modem goes off, the Airport lights go off and I cannot find my Airport Network any more on my computer.
When this happens, I can either unplug it from the power and plug it back in, or simply move the Airport around a little bit, and it will re-start. Sometimes the problem does not re-occur for a few hours or days, sometimes it keeps happening every few minutes and of course drives me crazy...
Is it because ... :
- ... my Airport has a faulty connection and I should replace it?
- ... there are power surges in my electricity installation (eg this seems to happen when I or my neighbors have air conditioners on, I live in one of those old New York buildings with old electricity installations), and I should get an anti-surge device, or a newer Airport would deal with this better?
- ... of something else? I tried replacing the Ethernet cable between the MoDem and the Airport and it failed, there does not seem to be a source of interference around my place.
Thanks for your help!

I have had similar problems. Not as bad as some of you but usually in the morning I discover that I have dropped onto someone elses wireless they are not as fast. Then I have to troop upstairs, unplug the Extreme, replug it and then everything is allright until the next morning. But it is sporadic. It has run fine now for a few days. This problem has persisted now for a year. And yes I have tried resetting it.
Next month I plan on going to the big city and I am going to take my Extreme to one of Genius' at the Apple Store. I am curious if anybody else has tried that solution and how much it might cost.

Trying to activate phone on pre-pay and get disconnected from *228 after 1 minute

It says "congratulations your phone is activated" but I need to dial *228 Send to program the phone. I do this and I am disconnected after 1 minute. I have tried this a dozen or so times with the same result. I had my old number transferred and now I can't use that phone either. HELP!

sjt6052
I'm so sorry for the trouble getting your prepaid device to activate! We definitely want to make sure you're connected and running at 100%. While we only have access to Post Paid on this site, I would like to make sure you can get in touch with our PrePaid team. Is there another line you can call from? To reach our Prepay Team from another line, please dial 888-294-6804. When prompted, enter your prepaid phone number. Then press 4 (for questions or to change something), then 5 (for Store Locations or Billing Questions), then 4 (for Customer Service Rep) and then enter your pass code for your account. If you do not know the pass code enter in four zeros. Then the system will transfer you to a Prepaid representative.
RuthW_VZW
Follow us on twitter @VZWSupport

Attempt to get media from DV Camcorder crashes every time.

Dell E6500 Laptop
Intel Core Duo CPU P8600 @ 2.40GHZ 2.40GHz
4GB of RAM (3.45 GB usable)
Windows 7 Professsional SP1 32bit
Travelstar 7K500 7200rpm SATA II Main Drive
The following error occurs every single time I try to load a movie off of my DV Camera via USB. Windows Movie stuff workes fine. Other software can access it fine. Any ideas on how to resolve this?
Premiere Elements 9.0, Ninja
Open a new project. Settings NTSC-DV-Widescreen 48kHz
DV Cam is connected and powered on and connected via USB 2.0
Choose Get Media
Choose DV Camcorder
New window opens the a dialog opens with the name "Premiere Elements Debug Event"
Contains the text:
Premiere Elements has encountered an error.
[..\..\Src\Static.cpp-88]
with the only option available continue
Dialog goes away, new dialog displays:
Premiere Elements
Sorry, a serious error has occurred that requires Adobe Premiere Elements to shut down. We will attempt to save your current project.
Click o.k. and then the windows message that Adobe Premiere Elements 9 has stopped working with the option to Debug or Close program.

Also, for Win7 read...
Legacy Driver and Capture http://forums.adobe.com/thread/869277?tstart=0
- And a Picture http://forums.adobe.com/thread/727755?tstart=0

HT4628 I upgraded to the Mavericks update recently, and my computer disconnects from the wi-fi every time it goes to sleep now.

It never used to disconnect so frequently or quickly. It is extremely annoying. Why does it suddenly keep disconnecting with this new update?

Words cannot describe how angry this problem makes me. How can world's largest tech company not been able to fix their biggest bug for this many months now?!?!
All these forums are overflowing with the same **** problem: WIFI DOESN'T CONNECT AFTER COMING BACK FROM SLEEP ON MAVERICKS.
How many thousands of people have to post the same godddamn problem for how long?
And no, disconnecting Bluetooth doesn't help (even if it did, its not an acceptable solution). I took my MacBook Air to Apple store twice already and they cannot help either.
aaaAAAAaAaaAAaaarrrrghhh, I'm going to go insane from this problem.
I miss Steve.. he wouldn't let something like this go on for this long. Can a half a trillion dollar company pay attention to its own support forums or at least google "wifi-not-connecting-after-sleep-mavericks" and realize what incompetent company you have become?!

Get disconnected from my Wi-Fi Every 5 Mins

Similar Messages

Maybe you are looking for