Get error during update of indesign & ps
Got automated notification updates available in cc -- hit "install all", bridge & lr update ok -- indesign & ps give error "error encountered during installation (U44M1P7)". my cc subscription is paid up! -- how do I get updates???
-U44M update error http://forums.adobe.com/thread/1289956
--more U44.. discussion http://forums.adobe.com/thread/1275963
Similar Messages
-
I keep getting "error during rendering/encoding of menus/slideshows" message. I have been burning DVD's in exactly the same way for the past 12 months and mostly on my MacBook which is 3 years old. Obviously I'm using iDVD. I purchased an iMac about a year ago and moved to use this for dvd burning without problem. A few months ago (approximately) I started to experience problems with burning with the error message above. I tried everything including starting the whole process from scratch right down to capturing the movie clips from my video recorder into iMovie, then using them in iDVD. Still the same message came up. I lost count of how many times I repeated the process with different clips and variations and the same thing happened. This was also the case with my MacBook and my husband's iMac.
After taking both of mymac's tothe service centre, having new optical thingys put it and even a new hard drive on my iMac along with a new DVD burner the same thing happened. They told me it must be the process that I am using that is incorrect!
I took my 27" iMac to an apple shop and asked them to assist me while I use the same technique as I always had. The same message came up so they tried using my clips in one of their mac's. The same message. They tried it with different clips and the same message. The only way we could get theirs to work was with a magic DVD which did not produce what I needed and was limited with only one page.
I now cannot use any of my Mac's for the intended purpose that I bought them for - to produce good media for my work! It was suggested that I purchase some non Mac software to burn DVDs which defeats the object of having a mac with iDVD in my opinion. I have a book on iDVD which is very informative and have followed the process to the letter and checked all the trouble shooting and still no remedy. It was mentioned that an up-date may have caused the problem on all my macs.
I feel that this issue should be addressed by Apple as a matter of correctness.
I now find that on the net there are many posts in forums and such like with exactly the same (almost word for word) problems. Please Apple, keep/regain your good name and sort this out.
Jayne ConnellyThanks Bengt W for your attention to this matter. So much appreciated. And thanks for putting me right on the aim of forums (new to this). Although, you may regret asking for more information. I've added everything I can below.
The process I used is as follows:
Import recorded clips of between 5 and 15minutes each from my video recorder into i
Edit the clips (remove unwanted start and endng)
Add title to front of clips
‘Share’ them to ‘movie’ (export using QuickTime)folder in .mov format individually
Open iDVD and ‘create new project’
Select ‘favourite’ theme that I have set up forall my work dvd’s (this has been used successfully many times and I’ve triedwithout using the favourite them).
Add 2 submenus for each group of clips
Select submenu - drag and drop between 3 – 6 clips in each of the twosubmenus
Change title colours on clips
Dragand drop image into drop zones where required
In‘map’ view I check for any yellow warnings before burning to disc
In an attempt to remedy the problems I’ve tried the following:
Try new DVD discs
Try different themes (favourites and standardones)
Change images in drop zones
Start whole process again even from importingfrom camera again
Two other completely different computers (iMacand MacBook) with iDVD
Go to apple shop and use their computers to doin iDVD
Try with one clip and no menu pages added
Use a clip that I already have that did notoriginate from my camera
Turn computer off and restart
New hard drive
New optical lense (thing)
New DVD burner
Saving to disc image rather than dvd disc
Other points:
I also have a ‘flip’ and ‘iPhone’ whereI’ve imported footage camera which, although limited, records and makes videoclips and burns them to DVD through iDVD without problem.
For example, I have just gone through steps 5 - 11 using some clips that were already imported from my iphone to iPhoto and dragged across. I used a theme that I've used before which has failed and added one sub menu page where the clip went. It burned to disc image successfully.
The startup disc, I believe will have no space issues asit’s a new hard drive with no use apart from this. That could have been an issue before (I didn’t check it) butnot now.
Other technical stuff that I don't understand but you may:
I have…… Mac OS X Version 10.6.7 with all updates onit. Processor 2.8 GHz Intel Corei7. Memory 4GB 1067 MHz DDR3.
iDVD version 7.1.1
HardwareOverview:
Model Name: iMac
Model Identifier: iMac11,1
Processor Name: Intel Core i7
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Memory: 4GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: IM111.0034.B02
SMC Version (system): 1.54f36
OPTIARCDVD RW AD-5680H:
Firmware Revision: 3AHB
Interconnect: ATAPI
Burn Support: Yes (AppleShipping Drive)
Cache: 2048KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL,-RW, +R, +R DL, +RW
Write Strategies: CD-TAO,CD-SAO, CD-Raw, DVD-DAO
Media: Toshow the available burn speeds, insert a disc and choose View > Refresh
If you can solve this you are better than the 'apple geeks' in the shop and the service technicians in the service centre (and of course me but that's no achievement).
Eagerly awaiting your reply.
Jayne -
Customer Coversion Using Interface Table - Error during update
I need to import customers from legacy applicatiion and is planning to use standard customer interface for that. For testing, I am able to create customers with hardcoded values. But while I try to update the same customer record (again using hard coded values), it gives me error and is not generating the error report as well. I am getting the following error during update:
racudc: ORA-20212: Enter valid Billing Fields.
ORA-06512: at "APPS.ADVOAR_CUST
racudc: Error updating customers.
or
racudc: updated 1 partiesracudc: Partyrel 1 parties
racudc: ORA-20210: You have edited one of the following fields, Extended Billi
racudc: Error updating customers.
Also it seems we can not update an address, site_use_code, or PRIMARY_SITE_USE_FLAG using customer interface.
The following is the test record I inserted for updating the customer I created and ran the customer interface:
insert into ra_customers_interface
(ORIG_SYSTEM_CUSTOMER_REF
,INSERT_UPDATE_FLAG
,CUSTOMER_NAME
,CUSTOMER_STATUS
,LAST_UPDATED_BY
,LAST_UPDATE_DATE
,CREATED_BY
,CREATION_DATE
,ORIG_SYSTEM_ADDRESS_REF
,ADDRESS1
,CITY
,COUNTY
,STATE
,POSTAL_CODE
,COUNTRY
,customer_attribute13
values
('APP1-492503' --ORIG_SYSTEM_CUSTOMER_REF
,'U' --INSERT_UPDATE_FLAG
,'Pizza Hut - CDH TEST4' --CUSTOMER_NAME
,'A' --CUSTOMER_STATUS
,-1 --LAST_UPDATED_BY
,sysdate --LAST_UPDATE_DATE
,-1 --CREATED_BY
,sysdate --CREATION_DATE
--,'Y' --PRIMARY_SITE_USE_FLAG
--,'BILL_TO' --SITE_USE_CODE
,'APP1-492503-ADDR1' --ORIG_SYSTEM_ADDRESS_REF
,'1 River Road, Bldg 1' --ADDRESS1
,'SCHENECTADY' --CITY
,'SCHENECTADY' --COUNTY
,'NY' --STATE
,12305 --POSTAL_CODE
,'US' --COUNTRY
,'55'
I am testing this in 11.5.10 env. Any help on this is appreciated.
Thanks,
MKConvert only the data you need. And the data you need is probably less than you think. For example, other than open invoices (invoices for which money is still owed), you probably don’t need to convert ANY old invoices. You may want to convert data on what was purchased (e.g., event registration, membership, product, etc.) but the actual details (e.g., payment type, payment date) are probably no longer significant.
http://www.e-datapro.net/data_conversion.htm -
Error during update of Table VBAP (RC= 4, Key= 5096672)
Hello experts,
i am getting error as
Update was terminated
System ID.... Q70
Client....... 999
User..... HPROLLSD
Transaction.. VA02
Update key... 4EF9258A885201B1E10080000A140014
Generated.... 28.12.2011, 18:08:25
Completed.... 28.12.2011, 18:08:25
Error Info... Error during update of Table VBAP (RC= 4, Key= 5096672)
Please help me on this issue.
Regards
NarendraHi,
Relevant issue,go through the link it could be help you.
Express document "Update was terminated" received from author
Ram -
I was updated my Iphone 4s from computer(ITunes).ITunes get error and update failed.(When Iphone is preparing.).And now ı can't use my IPhone.At the screen there is a USB cable and up of the screen there is ITunes' logo.PLEASE HELP!
Read what i say. Put iPhone in DFU mode. Connect with USB cable and restore.
Read:
http://www.apple.com/support/iphone/assistant/restore/ -
Getting Error while updating Vendor Challan
Dear Guru,
my client want to use Extended withholidng Tax . i v configured totaly according to indian TDS configuration. i m getting error while updating the vendor challan.
No unpaid tax lines exist for the given selection criteria.
Message no. 8I702
Diagnosis
The corresponding withholding tax line &1& is not present in WITH_ITEM table.
System Response
For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
Procedure
check entries in table WITH_ITEM for the open tax items chosen for clearing.
Business Place and section code updating properly in table.....
Thanks & Advance
Laxmi NarayanDear Laxmi Narayan,
This error would occur, if you miss Business Area/Section Code at the time of Invoice.
The following thread should answer your query:
Extended W/H Tax
Regards,
Naveen. -
TS3694 I get error while updating my I-phones its shows 3004
I get error while updateing my I-phone and its give number as 3004..
GirishWe dont know yet if he is doing it from the phone itself!
If you do from the phone try from iTunes and vice versa. -
Communication channel: error during update
Hi,gurus:
We are doring a soap2rfc scenario.
After reactivating relavant object in ID,I found that the status of sender communication channel was "error during update" in RWB.Have you ever dealed with the problem?Any help will be appreciated!hii
ask your basis guys to see the startup log of XI server...see if there is any error in it.. if there is any error in it, then restart your XI server.......go to SMICM....see if the ICM monitor is running fine.......If ICM is not running fine, then go to Administration->j2ee server->restart->yes and restart your j2ee engine of your XI server......
VisualAdmin-Server-services- Tracelogs. Also can restart your adapter engine and can you exact error you can getin RWB.
Regards -
ME 808: System error: error during update Table EKAB
Hi,
Couple of years ago, during carve out, one of the contracts was deleted.
A PO created against that contract carries some open quantities. Now our purchasing wants to close this PO, either by changing the quantity to delivered quantity (delivered quantity is lesser than PO quantity), or by checking the delivery complete box. But they are not able to do so, as there was no contract number exists in the system table.
I propose to create a contract with the same number mentioned in the PO and then to change the quantity in the purchase req and PO. However now the system issues a dump error message "ME 808: System error: error during update Table EKAB".
Can anyone help how to resolve the issue?
Any body had similar situation?
Thanks for your help.
Regards,
ShivaHi,
I am not sure how the external consultants deleted this contract during carve out.
Our division was bought out from another company and moved the data to our SAP system.
I checked the OSS and found note 922427 could resolve the issue.
Thanks for your response.
Regards -
Sessions/connections gets hang during update and select operations.
A table with 3 million records, which has customer details data.
Everyday application is executing select and update queries on that table.
Sessions/connections gets hang during update and select operations.
After checking ADDM report, following are the findings:
Please suggest the solutions
Findings and Recommendations
Finding 1: Row Lock Waits
Impact is 145.22 active sessions, 99.77% of total activity.
SQL statements were found waiting for row lock waits.
Recommendation 1: Application Analysis
Estimated benefit is 145.22 active sessions, 99.77% of total activity.
Action
Significant row contention was detected in the TABLE
"AVAYA.AIRTEL_CUSTOMER_MASTER" with object ID 82155. Trace the cause of
row contention in the application logic using the given blocked SQL.
Related Object
Database object with ID 82155.
Rationale
The SQL statement with SQL_ID "974vg65j29pmv" was blocked on row locks.
Related Object
SQL statement with SQL_ID 974vg65j29pmv.
UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
Rationale
The session with ID 50 and serial number 34525 in instance number 1 was
the blocking session responsible for 100% of this recommendation's
benefit.
Symptoms That Led to the Finding:
Wait class "Application" was consuming significant database time.
Impact is 145.22 active sessions, 99.77% of total activity.
Finding 2: Top SQL Statements
Impact is 46.39 active sessions, 31.87% of total activity.
SQL statements consuming significant database time were found. These
statements offer a good opportunity for performance improvement.
Recommendation 1: SQL Tuning
Estimated benefit is 46.39 active sessions, 31.87% of total activity.
Action
Investigate the UPDATE statement with SQL_ID "974vg65j29pmv" for
possible performance improvements. You can supplement the information
given here with an ASH report for this SQL_ID.
Related Object
SQL statement with SQL_ID 974vg65j29pmv.
UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
Rationale
The SQL spent only 0% of its database time on CPU, I/O and Cluster
waits. Therefore, the SQL Tuning Advisor is not applicable in this case.
Look at performance data for the SQL to find potential improvements.
Rationale
Database time for this SQL was divided as follows: 100% for SQL
execution, 0% for parsing, 0% for PL/SQL execution and 0% for Java
execution.
Rationale
SQL statement with SQL_ID "974vg65j29pmv" was executed 212 times and had
an average elapsed time of 2494 seconds.
Rationale
Waiting for event "enq: TX - row lock contention" in wait class
"Application" accounted for 100% of the database time spent in
processing the SQL statement with SQL_ID "974vg65j29pmv".**addm report **
ADDM Report for Task 'TASK_7526'
Analysis Period
AWR snapshot range from 5003 to 5004.
Time period starts at 08-JUL-13 11.00.27 AM
Time period ends at 08-JUL-13 12.00.45 PM
Analysis Target
Database 'AVAYADB' with DB ID 2878789264.
Database version 11.2.0.1.0.
ADDM performed an analysis of instance avayadb, numbered 1 and hosted at
NG-LA04AVAYA01.
Activity During the Analysis Period
Total database time was 563062 seconds.
The average number of active sessions was 155.63.
Summary of Findings
Description Active Sessions Recommendations
Percent of Activity
1 Row Lock Waits 155.44 | 99.88 1
2 Top SQL Statements 26.67 | 17.14 1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Findings and Recommendations
Finding 1: Row Lock Waits
Impact is 155.4 active sessions, 99.88% of total activity.
SQL statements were found waiting for row lock waits.
Recommendation 1: Application Analysis
Estimated benefit is 155.44 active sessions, 99.88% of total activity.
Action
Significant row contention was detected in the TABLE
"AVAYA.AIRTEL_CUSTOMER_MASTER" with object ID 82155. Trace the cause of
row contention in the application logic using the given blocked SQL.
Related Object
Database object with ID 82155.
Rationale
The SQL statement with SQL_ID "974vg65j29pmv" was blocked on row locks.
Related Object
SQL statement with SQL_ID 974vg65j29pmv.
UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
Rationale
The session with ID 167 and serial number 6084 in instance number 1 was
the blocking session responsible for 100% of this recommendation's
benefit.
Symptoms That Led to the Finding:
Wait class "Application" was consuming significant database time.
Impact is 155.45 active sessions, 99.88% of total activity.
Finding 2: Top SQL Statements
Impact is 26.66 active sessions, 17.14% of total activity.
SQL statements consuming significant database time were found. These
statements offer a good opportunity for performance improvement.
Recommendation 1: SQL Tuning
Estimated benefit is 26.67 active sessions, 17.14% of total activity.
Action
Investigate the UPDATE statement with SQL_ID "974vg65j29pmv" for
possible performance improvements. You can supplement the information
given here with an ASH report for this SQL_ID.
Related Object
SQL statement with SQL_ID 974vg65j29pmv.
UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
Rationale
The SQL spent only 0% of its database time on CPU, I/O and Cluster
waits. Therefore, the SQL Tuning Advisor is not applicable in this case.
Look at performance data for the SQL to find potential improvements.
Rationale
Database time for this SQL was divided as follows: 100% for SQL
execution, 0% for parsing, 0% for PL/SQL execution and 0% for Java
execution.
Rationale
SQL statement with SQL_ID "974vg65j29pmv" was executed 707 times and had
an average elapsed time of 794 seconds.
Rationale
Waiting for event "enq: TX - row lock contention" in wait class
"Application" accounted for 100% of the database time spent in
processing the SQL statement with SQL_ID "974vg65j29pmv".
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Additional Information
Miscellaneous Information
Wait class "Commit" was not consuming significant database time.
Wait class "Concurrency" was not consuming significant database time.
Wait class "Configuration" was not consuming significant database time.
Wait class "Network" was not consuming significant database time.
Wait class "User I/O" was not consuming significant database time.
Session connect and disconnect calls were not consuming significant database
time.
Hard parsing of SQL statements was not consuming significant database time. -
Received the error when updating to inDesign 2014 "Unable to extract to temp directory." c
Received the error when updating to inDesign 2014 "Unable to extract to temp directory." Anyone have a fix for this?
Tjshannonhigg you will want to ensure that the User account you are logged into has proper access to the temp directory and that there is sufficient disk space available.
-
Communication channels error during update
Hello,
All the Communication channels of the XI QA system are showing a status "Error during Update" Checked status of components in Runtime Workbench --> Component Monitoring. Red Alert on Adapter Engine The details of the Communication channel error below is:
com.sap.aii.af.service.administration.api.AdminException: Unable to
retrieve channel runtime status: EventException:
com.sap.engine.frame.cluster.message.PartialResponseException: One or
more of the destinations did not return a response. Response status:
[303228750-RTOE,303228751-RTOE,303981451-OK].
Has anyone encountered this before? Do you have any suggestions on where to look at to investigate on the cause of the problem?
Thanks in advance.
ReginaHi Regina,
ask your basis guys to see the startup log of XI QA...see if there is any error in it.. if there is any error in it, then restart your XI server.......go to SMICM....see if the ICM monitor is running fine.......If ICM is not running fine, then go to Administration->j2ee server->restart->yes and restart your j2ee engine of your XI server......
Thanks,
Rajeev Gupta -
I keep getting errors when updating from the Creative Cloud (49)
I keep getting errors when updating from the Creative Cloud (49).
" Update Failed" and when I click on Learn More. The error messages says there is a download error with (49) I am signed on as administrator, so that shouldn't be a problem. I have Windows 7.Error 49 https://forums.adobe.com/thread/1491394
-and https://forums.adobe.com/thread/1353632
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
I can't open my itunes
there was an error during update downloadSee... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562 -
[SOLVED] Error during update of LUKS header on device ./file
dd if=/dev/zero of=./file bs=1M count=200
cryptsetup luksFormat -s 512 -c aes-xts-plain64 -h sha512 ./file
WARNING!
========
This will overwrite data on ./file irrevocably.
Are you sure? (Type uppercase yes): YES
Enter LUKS passphrase:
Verify passphrase:
Error during update of LUKS header on device ./file.
This only happens on my 1TB HDD (GPT, xfs filesystem). I have 2 SSDs that do not throw the error.
I tested using a flash drive formatted as GPT and using xfs filesystem and it worked.
Ideas?
Last edited by not_sure (2013-03-01 02:50:32)Hmm... I didn't know you could do that. Are you sure it can? https://wiki.archlinux.org/index.php/Di … ison_table
I thought dm-crypt basically did block level encryption.
I guess this is a "virtual partition"? Maybe https://www.linux.com/community/blogs/1 … nux/280174 helps? It seems to mount it as loopback prior to encryption?
Last edited by cfr (2013-03-01 01:07:16)
Maybe you are looking for
-
IPod Touch 1G v. 3.1.3 Wi-Fi Problems
I would like to preface this post with the statement: I know that there are extensive posts on this topic already, and I have diligently reviewed most of them, but I am still having trouble; so please bear with me. I just bought a used iPod Touch 1G
-
Drag and Drop between two trees...
Hi , Please tell me how to drog and drop from two diffrient trees in a form? is the any demo for this one .. please let me know if there.. thanks in advance Mani
-
Camera, Browser & Maps Not Working
Hi, It been since yesterday my Z10 camera, broser & maps not working. Whenever I click the camera icon, it is not even opening. Browser icon had changed, it turned to a triangle square & circle. Can anyone help me out. Thanks, Chris
-
I've had my MacBook Pro for several months. Sadly I've not been able to use it for my work (I'm a writer) as I couldn't open my software, Final Draft. I installed it several times, uninstalling it each time to avoid glitches, but every time I tried
-
How to Setup LCD Monitor and ATI Rage LT Pro ? Thanks
I have already added the 109401-01 Patch to Solaris 8 (x86) , but I got a problem , that LCD Monitor and ATI Rage LT Pro was wrong in kdmconfig, Someone can help me how to config them? thanks