Get error when trying to delete email

Can't delete email? Get "unable to move message - the message could not be moved to the mailbox trash" error when I do. How can I resolve? Thanks! sidavis

Here is an article from the apple support website that might help out.
http://support.apple.com/kb/TS2475

Similar Messages

  • What can be done to avoid getting the following error when trying to delete unused clips he operation could not be completed.  *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil

    what can be done to avoid getting the following error when trying to delete unused clips in Imovie 09 "the operation could not be completed.  *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil"  I use to get these type of error messages when trying to delete unsused clips from a large event 60 minutes or longer, but now I get this message when trying to reduce a 4 minute event.
    Also, does anyone know if there is a limit to the total amount of space that can be taken up by Projects in Imovie 09
    Thanks for any help

    Zachy,
    It goes something like this...
    Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
    Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

  • Getting error when trying to create Exchange Connector in System Center Service Manager 2012

    Getting error when trying to create Exchange Connector in System Center Service Manager 2012
    The connection to the server was unsuccessful. Please check the server name and/or credentials entered.
    Additional Information: The server URL is not accessible or the user does not have permission to access it (message: The request failed. The remote server returned an error: (401) Unauthorized.
    Warm Regards, Pramod Kumar Singh Manager-IT

    Someone sorted out this issue by installing API 1.2 and copying the dll files to the service manager server ,service folder and replacing it with API 2.0 dll files.
    Also, your question is related to SCSM, please post at SCSM forum if you have further question.
    Juke Chou
    TechNet Community Support

  • Currently using Flash Pro CS5,  getting error when trying to open CS4 file.  Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version.

    Currently using Flash Pro CS5,  getting error when trying to open CS4 file.  Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version.  Has there been a fix or patch to this issue or do I have to convert back to CS4 to open the file?

    Having the same problem in CS6.  I can tell you that converting back to CS4 will NOT solve the problem.  It seems when support for backward compatibility is discontinued, there's just no way to get
    any help at all?  Absolute failure to provide any user support so far...

  • OVM 3: error when trying to delete a virtual machine

    Hi,
    I enclose below the error when trying to delete, using OVM MANAGER, a VM that has been wrongly created.
    Thanks for you help.
    Job Construction Phase
    begin()
    com.oracle.odof.exception.ObjectException: Caught during invoke method: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_2007E Find object name: (0}, class: interface com.oracle.ovm.mgr.api.virtual.VirtualMachine, returned null
    Wed Mar 21 14:42:20 CET 2012
    at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:151)
    at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
    at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
    at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:751)
    at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:401)
    at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:459)
    at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
    at java.lang.Thread.run(Thread.java:662)
    Caused by: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_2007E Find object name: (0}, class: interface com.oracle.ovm.mgr.api.virtual.VirtualMachine, returned null
    Wed Mar 21 14:42:20 CET 2012
    at com.oracle.ovm.mgr.api.manager.OvmManagerImpl.deleteObject(OvmManagerImpl.java:393)
    at com.oracle.ovm.mgr.api.manager.OvmManagerImpl.deleteObject(OvmManagerImpl.java:382)
    at com.oracle.ovm.mgr.api.system.FoundryDbImpl.deleteVirtualMachine(FoundryDbImpl.java:1302)
    at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:247)
    at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:207)
    at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
    ... 7 more
    Job Aborted from server, cleaning up client.

    HI,
    I had this - the recommended solution was to re-install the OVM manager.

  • Getting No checksum error when trying to delete uploaded file

    When trying to delete an uploaded file I get the following error :-
    No checksum was provided to show processing for a page that requires a checksum when one or more request, clear cache, or argument values are passed as parameters.
    I have a tabular report displaying the uploaded files with one of the columns showing a delete icon.
    When you select the delete icon it has Column Link details of the following
    Link Text : <img src="#APP_IMAGES#del.gif">
    Link Attribute : &APP_ID.
    Target: URL
    Url:
    javascript:confirmFileDelete(htmldb_delete_message,'f?p=&APP_ID.:11:&SESSION.:REMOVE_ID:&DEBUG.::P11_DELETE_ID:#FILE_ID#');
    The above was working till I turned on the Session State Protection.
    I believe I need to add a checksum to my url via the pl/sql package apex_util.prepare_url but can someone please show me how to do from my URL????
    Thanks in advance
    Keith

    Keith,
    Why not do the following then...
    I think confirmDeleteFile is a custom function correct? As the second parameter, just pass in the file ID. Then in the function use JavaScript to set the value of P11_DELETE_ID to the file ID. Then call doSubmit('REMOVE_ID');
    Regards,
    Dan
    http://danielmcghan.us
    http://sourceforge.net/projects/tapigen

  • 'Blank user name' error when trying to change email password

    My password on our mail server changed, when I tried to change the password on my Storm 9500 I get 'Blank user name' error when trying to change, but I have typed in a user name!!!!
    BLOODY frustrating because now I am not receiving any mails at all, so my business out of the office has come to a standstill!!!!
    Vicky
    Solved!
    Go to Solution.

    Try changing the email password on your PC, if you are having problems doing so from your device.
    From your desktop PC:  http://www.blackberry.com/btsc/KB02830
    North American Carriers - scroll down to select your carrier
    WorldWide Carriers - Find your carrier on the list
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Getting Error when trying to connect to the Primavera database. PPM V7 SP3

    Hi Guys,
    Caused by: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'mailService' defined in class path resource [com/primavera/bre//com/primavera/bre/integration/intgconf.xml]: Invalid destruction signature; nested exception is org.springframework.beans.factory.support.BeanDefinitionValidationException: Couldn't find a destroy method named 'destroy' on bean with name 'mailService'
    I have looked into the intgserver.jar under P6IntegrationAPI/lib and looked the com.primavera.infr.srvcs.MailServiceImpl.java and can see that there is no destroy method whereas it is defined in the com.primavera.bre.intergration.intgconf.xml as below
    <!-- provides mail services -->
    <bean id="mailService" class="com.primavera.infr.srvcs.MailServiceImpl" init-method="init" scope="singleton" destroy-method="destroy"*+>
    <property name="adminManager"><ref bean="adminManager"/></property>
    <property name="threadPool"><ref bean="threadPool"/></property>
    <property name="settingsManager"><ref bean="settingsManager"/></property>
    </bean>
    I get the above error when trying to connect to the Primavera database. I use PPMV7 SP3 and I have installed the Integration API from EPPMV7 bundle.
    My demo's are working fine.
    Any help would be appreciated.
    Thanks,
    Kajal.

    Hi Marc,
    I am using a userid (is an admin)
    Using global login method and provided userid & password in integration settings.
    In the machine profiles, provided userid, password and domin.
    Not providing domain in weblogin.
    With all the above I am still getting error "Could not authenticate the specified user. %0" for HFM application
    And with the same settings I am not getting any error to connect to essbase cube.
    Any suggestions?
    Thanks
    Krishna

  • Error when trying to delete a vendor from SC

    Hi all,
    I am encountering a problem when trying to delete a vendor from a contract and assign preferred vendor.
    The messages are
    "Enter exactly one partner of type preferred vendor"
    "Partner data couldnot be determined".
    In BBP_PD, I find two entries in partner table with partner_fct = 39.
    I am also not able to delete one of this entry.
    Please suggest.
    Thanks
    Nandalal

    Hi Nandlal,
    Can you see the business partner nos correctly for the vendors you are trying to assign?
    Are these vendors assigned to pur org?
    DO you get all greens in BBP_BP_OM_INTEGRATE?
    BR
    Dinesh

  • Getting error when trying to update apps

    I'm getting this error when trying to update CC apps on my iMac:
    Update Failed
    Unable to write to file/folder. You may exit now, try after disabling your anti-virus, or contact customer support.
    Has anyone experienced/resolved this issue?

    Ggallowaycb it would appear that your current User account's file permissions have become compromised and you are unable to write/modify a specific directory.  Please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html for information on how to adjust your file permissions.

  • Getting error when trying to open Job Manager

    Hi List
    we are getting the below error when trying to open the Job Manager,which worked fine until yesterday.
    [nqs error 46105] Error executing Process: "C:\Program Files\Java\jdk1.6.0\bin\javaw.exe" - Xmx1024m -cp D:\OracleBI\server\Bin\JobManager\startup.jar org.eclipse.core.launcher.Main -data D:\OracleBIData\jobmanager -configuration C:\OracleBIData\jobmanager The system cannot find the path specified
    Please advice.
    Thanks..

    Did you change your JDK path by any chance? Also you are getting a strange error message. It is trying to point to both D:\OracleBIData\jobmanager and C:\OracleBIData\jobmanager. Is there anything that you changed prior to doing this?
    Thanks,
    Venkat
    http://oraclebizint.wordpress.com

  • Getting error when tried to learn the documents in OFR Designer

    Hi All,
    As per project requirements, I have to create Classification and Verification LearnSets in Oracle Form Recognition Designer depending on three Invoice Types-- PO,Non-PO and Pre-Approved.
    First I created three derived classes under Generic Class -- PO,Non-PO and Pre-Approved.
    I can add documents in Classification and Extraction LearnSet, analyze them, but getting error when click on the Learn button, I couldn't make the engine ready in learned state from the Definition Mode.
    Always getting the below two errors:-
    1) Cannot compile. May be not enough classes defined or too few documents assigned to the classes.
    Cannot learn the BrainwareView : DefaultView
    SERbrainware : Learn, learning error (7)
    2) Cannot compile. May be not enough classes defined or too few documents assigned to the classes.
    Cannot create Brainware Dictionary for BrainwareView : DefaultView
    SERbrainware : Create/AppendDictionary, preprocessing error (3)
    Thanks in advance,
    Moumi.

    Hi All,
    The below mentioned error were resolved after adding documents in Void Class.
    Thanks,
    Moumi.
    Edited by: 903667 on Jan 31, 2013 8:34 PM

  • Why do I get an error when trying to send email?

    When I try to email a photo directly from iPhoto, I get an error message that tells me that server is unable to identify email name and password. WHY?
    I verified and email address and password are correct>
    Also, I have listed to email addresses on my MAC a Gmail address and a Comcast (other) account, but when I click on stamp for email on my desktop it opens both mailboxes in one place. Is there a way to separate them.
    Any answer and help provided will be greatly appreciarted.

    Have you ever tried to access email via your iPhone in the past with this service? Has it ever worked? I'm looking at their support page and cannot find any information regarding access via a mobile device. I'm wondering since it is a satellite service that you cannot access their domain from cellular service. I'm not positive, but a search of their support page is not yielding much information.
    Also, the incoming server is not your problem. It is the outgoing server or SMTP. According to the settings, it should be smtp.everyone.net. It does not use SSL for the outgoing server, and the username is your entire email address and then your password.
    You should be able to use the information for the Mac mail that I found in this link. http://www.skybeam.com/support/helpful-guides/email-support/mac-mail/ If that doesn't work, I would call their support phone number and ask about using their mail on a mobile device.

  • Trying to email something and get email stating job received..but get error when tries to print

    just got eprint...trying to email to printer..i get a email stating job sent...but i get error with printer...can you email with 3G or do you have to wifi?

    Thanks for getting back to me. I tried all of those first-quiting, restarting, disk permissions repair in the utility.
    I have unlimited FTP space (confirmed with Go Daddy)and 64 gigs left on computer, so space isn't the issue.
    There is a png somewhere and I think it's in the PRAISE file, but have no idea how to find it and delete it.
    I can work on IWEB and create stuff, I can save it, but I can't publish it.
    With 2 radio shows to keep current, this is a problem. Any other thoughts?
    Thanks again,
    Cynthiia

  • Getting error while trying to delete columns from form designer

    I Am trying to make last name a mandatory field.
    AD was not getting provisioned for users that i created.The system validation task was not getting completed.WHen i tried to save the process form it was showing that last name was a mandatory field.So i figured it out that my process form was not getting populated.
    i was trying to delete last name from the form version.But it was throwing an error code= DOBJ.SDC_CANNOT_DELETE_SRE_ENTRIES_EXIST
    So i am trying to create a new version of a form and delete some columns.But when im doing it it shows the following error :
    ERROR,15 Dec 2008 18:03:20,073,[XELLERATE.SERVER],Class/Method: tcSDC/hasPrePopulatedEntries Error :Sdk cannot drop, SRE entries Exist.
    Could you help as to how i can resolve this.

    You cannot delete a column, but you can hide it ;)
    In your case, you may follow these steps:
    1) Create a new form version.
    2) Go to the "Properties" tab in the form editor.
    3) Delete the "Required=true" property for the "Last Name" field.
    4) Add a new property to the "Last Name" field: select "Visbile Field" in the "Property Name" combo-box, and add "false" to the "Property Value". Save.
    5) Activate your version.
    Think again about hidding the "Last Name", because I think it's a mandatory value for AD user creation (i.e., AD won't let you create users if they don't have Last Name set). However, I'm not sure.
    Hope this help!

Maybe you are looking for