Get error when trying to install Leopard on Power Mac G5

Specs are G5 1.8 GHz
1 GB of RAM
80 GB HDD
Error is: Mac OS X cannot be installed on this computer: this software cannot be installed on this computer.
I am using retail Mac OS X install disc.\
Any ideas?

None of the Gray Discs will work, they're all machine specific, & IntelMac only too.
2Z691-6320-A
That one only works on certain model MBPs, for 15 inch MacBook Pros manufactured between October 2008 and June 2009.
Perhaps if you had the Black Retail Leopard Disc & put it in the MBP's drive, then booted the MBP into Target mode...
http://docs.info.apple.com/article.html?artnum=58583
Then boot the G5 with the Option key held down, it may work, not certain

Similar Messages

  • Keep getting error when trying to instal Mavericks at the stage when computer is supposed to restart?

    Have tried to instal mavericks on a 2011 mac mini serveral times and keep getting a error when it gets to the reboot stage. Help needed thanks!

    Have you tried un-installing, then going to Apple Downloads (http://support.apple.com/downloads/) for download /installation of QT 7.6.2?
    Also - it wouldn't hurt to repair permissions before & after installation.

  • Always getting errors when trying to control YOKOGAWA 7651 power supply on Labwindows/CVI

    Hi,
    I'm trying to set the voltage on the YOKOGAWA 7651 power supply through labwindows/cvi. I've set up a numeric slide on my userinterface with callback function "yoko7651dcvolts" and constant name "YOKO7651DCVOLTS".
    I always get this error when I run my program:
    "FATAL RUN-TIME ERROR: "DcSource.c", line 53, col 65, thread id 0x00001F3C: Invalid argument type: found 'pointer to double', expected 'pointer to int'."
    This error points to the third argument of the GetCtrlVal function below. The program/compiler wants me pass the variable "yoko1volts" as integer, but I want to (and should) be able to set voltages as floating numbers.
    Plus, even when I declare "yoko1volts" as integer, it stills doesn't work. All I get is zero, zero, and zero...on the power supply meter everytime I press the numeric slide.
    This is the section of the C code that is problemic:
    int CVICALLBACK yoko7651dcvolts (int panel, int control, int event,
    void *callbackData, int eventData1, int eventData2)
    double yoko1volts;
    switch (event)
    case EVENT_COMMIT:
    GetCtrlVal (yoko76511Panel, YOKO7651_1_YOKO7651DCVOLTS, &yoko1volts); // to read the values entered on the numerical meter on the user interface
    yk7651_set_volts (yoko76511Panel, yoko1volts); // set the entered values as voltage on the instrument
    break;
    return 0;
    This is the related h-file:
    #define YOKO7651_1 4
    #define YOKO7651_1_YOKO7651SWITCH 2 /* control type: binary, callback function: yoko7651switch */
    #define YOKO7651_1_YOKO7651DCVOLTS 3 /* control type: scale, callback function: yoko7651dcvolts */
    Please help, how can I fix this issue?
    All the drivers (including the YOKOGAWA 7651 power supply) are properly installed and mounted. As a matter of fact, I can successfully turn the power supply on and off with the code below:
    int CVICALLBACK yoko7651switch (int panel, int control, int event,
    void *callbackData, int eventData1, int eventData2)
    int yoko7651switchstate;
    switch (event)
    case EVENT_COMMIT:
    GetCtrlVal (yoko76511Panel, YOKO7651_1_YOKO7651SWITCH, &yoko7651switchstate);
    SetCtrlVal (yoko76511Panel, YOKO7651_1_YOKO7651SWITCH, !yoko7651switchstate);
    yk7651_output (yoko76511Panel, !yoko7651switchstate);
    break;
    return 0;
    It's just setting the voltage on the power supply that is very problematic. Any help is appreciated...Thanks.
    Solved!
    Go to Solution.

    I second Al opinion of a disconnection between the UIR and the variable that holds the panel handle.
    As a side note, I noted that the problematic line is reading the value of the controll whose callback is executed:
    #define YOKO7651_1_YOKO7651DCVOLTS 3 /* control type: scale, callback function: yoko7651dcvolts */
    int CVICALLBACK yoko7651dcvolts (int panel, int control, int event,
    void *callbackData, int eventData1, int eventData2)
    double yoko1volts;
    switch (event)
    case EVENT_COMMIT:
    GetCtrlVal (yoko76511Panel, YOKO7651_1_YOKO7651DCVOLTS, &yoko1volts); // to read the values entered on the numerical meter on the user interface
    yk7651_set_volts (yoko76511Panel, yoko1volts); // set the entered values as voltage on the instrument
    break;
    return 0;
    In a situation like this, I would try using GetCtrlVal (panel, control, &yoko1volts); instead, that should get rid of all problems in panel handle / control ID.
    Despite this solution is working, in any case I would deep into the problem as an incorrect panel handle can lead to erratical behaviour in other places of the program.
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • I keep getting an error when trying to install Java for OS X 2014-001

    I was trying to download this because I was getting errors when trying open some applications saying you need Java 6 and it directed me to the download link for this but it always gets and error when installing.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Select
              /var/log ▹ install.log
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. The contents of the log will appear on the right. Each log message begins with a timestamp. Select the messages from the time of the last installation or update attempt. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again. Select the new messages that appear. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    ☞ If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    ☞ When posting a log extract, be selective. Don't post more than is requested.
    ☞ Please don't indiscriminately dump thousands of lines from the log into this discussion.
    ☞ Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting. You may need to use a text editor with search and replace, such as TextEdit.

  • I get an error when trying to install updates in Photoshop CS6

    I get an error when trying to install updates in Photoshop CS6. It says "Update Failed; Updates could not be applied." Anybody else have this probelm?

    Brooks Potteiger I would recommend also reviewing the installation log for the update you are trying to apply.  You can find details on how to accomplish this at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

  • Getting error when trying to create Exchange Connector in System Center Service Manager 2012

    Getting error when trying to create Exchange Connector in System Center Service Manager 2012
    The connection to the server was unsuccessful. Please check the server name and/or credentials entered.
    Additional Information: The server URL is not accessible or the user does not have permission to access it (message: The request failed. The remote server returned an error: (401) Unauthorized.
    Warm Regards, Pramod Kumar Singh Manager-IT

    Someone sorted out this issue by installing API 1.2 and copying the dll files to the service manager server ,service folder and replacing it with API 2.0 dll files.
    Also, your question is related to SCSM, please post at SCSM forum if you have further question.
    Juke Chou
    TechNet Community Support

  • Fatal error when trying to install AIR app on OSX

    A user of my application is getting a fatal error when trying to install on OSX. Most installs seem to go fine so I was surprised at this one.
    A portion of the OSX error report is below. Has anybody experienced anything similar? If so, were you able to identify the core problem?
    Thanks in advance for any thoughts!
    Daniel
    Date/Time:       2013-06-13 15:50:24.666 -0700
    OS Version:      Mac OS X 10.8.3 (12D78)
    Report Version:  10
    Interval Since Last Report:          1414734 sec
    Crashes Since Last Report:           30
    Per-App Crashes Since Last Report:   5
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000008
    VM Regions Near 0x8:
    --> __PAGEZERO             0000000000000000-0000000000001000 [    4K] ---/--- SM=NUL  /Applications/SimpleDiagrams2.app/Contents/MacOS/SimpleDiagrams2
        __TEXT                 0000000000001000-0000000000007000 [   24K] r-x/rwx SM=COW  /Applications/SimpleDiagrams2.app/Contents/MacOS/SimpleDiagrams2
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   com.adobe.AIR                      0x02b43f72 0x2800000 + 3424114
    1   com.adobe.AIR                      0x02909628 0x2800000 + 1087016
    2   com.adobe.AIR                      0x02909853 0x2800000 + 1087571
    3   com.apple.AppKit                   0x95544970 -[NSApplication(NSAppleEventHandling) _handleAEReopen:] + 255
    4   com.apple.AppKit                   0x952ec824 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 378
    5   libobjc.A.dylib                    0x9a3c9628 -[NSObject performSelector:withObject:withObject:] + 77
    6   com.apple.Foundation               0x94e4473a __76-[NSAppleEventManager setEventHandler:andSelector:forEventClass:andEventID:]_block_invoke_0 + 121
    7   com.apple.Foundation               0x94e44291 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 430
    8   com.apple.Foundation               0x94e4408e _NSAppleEventManagerGenericHandler + 173
    9   com.apple.AE                       0x97aeda35 aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned long, unsigned char*) + 331
    10  com.apple.AE                       0x97ac2fbe dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 44
    11  com.apple.AE                       0x97ac2e7d aeProcessAppleEvent + 318
    12  com.apple.HIToolbox                0x9222fc58 AEProcessAppleEvent + 100
    13  com.apple.AppKit                   0x952e8d4d _DPSNextEvent + 1655
    14  com.apple.AppKit                   0x952e81dc -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 119
    15  com.apple.AppKit                   0x952de63c -[NSApplication run] + 855
    16  com.adobe.AIR                      0x0280a772 0x2800000 + 42866
    17  com.adobe.AIR                      0x0280aab8 0x2800000 + 43704
    18  libobjc.A.dylib                    0x9a3c95d3 -[NSObject performSelector:withObject:] + 70
    19  com.simplediagrams2                0x00002f97 start + 2567
    20  com.simplediagrams2                0x000025c5 start + 53
    Thread 1:: Dispatch queue: com.apple.libdispatch-manager
    0   libsystem_kernel.dylib             0x9263d9ae kevent + 10
    1   libdispatch.dylib                  0x97b75c71 _dispatch_mgr_invoke + 993
    2   libdispatch.dylib                  0x97b757a9 _dispatch_mgr_thread + 53
    Thread 2:
    0   libsystem_kernel.dylib             0x9263c8e2 __psynch_cvwait + 10
    1   libsystem_c.dylib                  0x996fb280 _pthread_cond_wait + 833
    2   libsystem_c.dylib                  0x99781095 pthread_cond_wait$UNIX2003 + 71
    3   com.adobe.AIR                      0x02d1b113 0x2800000 + 5353747
    4   com.adobe.AIR                      0x02b4d5dc 0x2800000 + 3462620
    5   com.adobe.AIR                      0x02d1b22d 0x2800000 + 5354029
    6   com.adobe.AIR                      0x02d1b2a7 0x2800000 + 5354151
    7   com.adobe.AIR                      0x02d1b342 0x2800000 + 5354306
    8   libsystem_c.dylib                  0x996f65b7 _pthread_start + 344
    9   libsystem_c.dylib                  0x996e0d4e thread_start + 34
    Thread 3:
    0   libsystem_kernel.dylib             0x9263c8e2 __psynch_cvwait + 10
    1   libsystem_c.dylib                  0x996fb280 _pthread_cond_wait + 833
    2   libsystem_c.dylib                  0x99781095 pthread_cond_wait$UNIX2003 + 71
    3   com.adobe.AIR                      0x02d1b113 0x2800000 + 5353747
    4   com.adobe.AIR                      0x02b4d5dc 0x2800000 + 3462620
    5   com.adobe.AIR                      0x02d1b22d 0x2800000 + 5354029
    6   com.adobe.AIR                      0x02d1b2a7 0x2800000 + 5354151
    7   com.adobe.AIR                      0x02d1b342 0x2800000 + 5354306
    8   libsystem_c.dylib                  0x996f65b7 _pthread_start + 344
    9   libsystem_c.dylib                  0x996e0d4e thread_start + 34
    Thread 4:
    0   libsystem_kernel.dylib             0x9263c8e2 __psynch_cvwait + 10
    1   libsystem_c.dylib                  0x996fb280 _pthread_cond_wait + 833
    2   libsystem_c.dylib                  0x99781095 pthread_cond_wait$UNIX2003 + 71
    3   com.adobe.AIR                      0x02d1b113 0x2800000 + 5353747
    4   com.adobe.AIR                      0x02b4d5dc 0x2800000 + 3462620
    5   com.adobe.AIR                      0x02d1b22d 0x2800000 + 5354029
    6   com.adobe.AIR                      0x02d1b2a7 0x2800000 + 5354151
    7   com.adobe.AIR                      0x02d1b342 0x2800000 + 5354306
    8   libsystem_c.dylib                  0x996f65b7 _pthread_start + 344
    9   libsystem_c.dylib                  0x996e0d4e thread_start + 34
    Thread 5:
    0   libsystem_kernel.dylib             0x9263c8e2 __psynch_cvwait + 10
    1   libsystem_c.dylib                  0x996fb280 _pthread_cond_wait + 833
    2   libsystem_c.dylib                  0x99781095 pthread_cond_wait$UNIX2003 + 71
    3   com.adobe.AIR                      0x02d1b113 0x2800000 + 5353747
    4   com.adobe.AIR                      0x02b4d5dc 0x2800000 + 3462620
    5   com.adobe.AIR                      0x02d1b22d 0x2800000 + 5354029
    6   com.adobe.AIR                      0x02d1b2a7 0x2800000 + 5354151
    7   com.adobe.AIR                      0x02d1b342 0x2800000 + 5354306
    8   libsystem_c.dylib                  0x996f65b7 _pthread_start + 344
    9   libsystem_c.dylib                  0x996e0d4e thread_start + 34
    Thread 6:
    0   libsystem_kernel.dylib             0x9263c8e2 __psynch_cvwait + 10
    1   libsystem_c.dylib                  0x996fb280 _pthread_cond_wait + 833
    2   libsystem_c.dylib                  0x997810e0 pthread_cond_timedwait$UNIX2003 + 70
    3   com.adobe.AIR                      0x02d1b13f 0x2800000 + 5353791
    4   com.adobe.AIR                      0x02d60c0e 0x2800000 + 5639182
    5   com.adobe.AIR                      0x02d1b22d 0x2800000 + 5354029
    6   com.adobe.AIR                      0x02d1b2a7 0x2800000 + 5354151
    7   com.adobe.AIR                      0x02d1b342 0x2800000 + 5354306
    8   libsystem_c.dylib                  0x996f65b7 _pthread_start + 344
    9   libsystem_c.dylib                  0x996e0d4e thread_start + 34
    Thread 7:
    0   libsystem_kernel.dylib             0x9263d0ee __workq_kernreturn + 10
    1   libsystem_c.dylib                  0x996f90ac _pthread_workq_return + 45
    2   libsystem_c.dylib                  0x996f8e79 _pthread_wqthread + 448
    3   libsystem_c.dylib                  0x996e0d2a start_wqthread + 30
    Thread 8:
    0   libsystem_kernel.dylib             0x9263d0ee __workq_kernreturn + 10
    1   libsystem_c.dylib                  0x996f90ac _pthread_workq_return + 45
    2   libsystem_c.dylib                  0x996f8e79 _pthread_wqthread + 448
    3   libsystem_c.dylib                  0x996e0d2a start_wqthread + 30
    Thread 0 crashed with X86 Thread State (32-bit):
      eax: 0x00000000  ebx: 0x02b43f55  ecx: 0x95b40466  edx: 0x00000000
      edi: 0x00000000  esi: 0xbfffef18  ebp: 0xbfffee58  esp: 0xbfffeda0
       ss: 0x00000023  efl: 0x00210282  eip: 0x02b43f72   cs: 0x0000001b
       ds: 0x00000023   es: 0x00000023   fs: 0x00000000   gs: 0x0000000f
      cr2: 0x00000008
    Logical CPU: 1

    Hi Daniel,
    Could you post or send me ([email protected]) the entire crash log?  I'll at least need the binaries section so I can properly symbolicate the log.
    Thanks,
    Chris

  • "Shared Resources error" when trying to install Photoshop Elements 11

    I keep getting installation error "Shared Resources error" when trying to install Photoshop Elements 11 (Windows 7).  Any advice will be appreciated..

    Welcome to the forum, Ted,
    Here's an older "Shared Technologies" thread: http://forums.adobe.com/message/3155897#3155897
    But, I am not sure that we were ever able to help the OP, and they never reported back with the responses from Adobe. Still, might be a tip that is useful.
    Good luck,
    Hunt
    [Edit] I mis-spoke. The OP and another user with the same error WERE helped. What I saw initially was yet another poster, who was going to contact Adobe, but never came back to the thread. In the case of the OP and another users, the issue was caused by having Adobe Bridge, included with other Adobe programs, like Photoshop and Premiere Pro, running. When they killed that, the installation went well.
    Message was edited by: Bill Hunt

  • HT1926 Error when trying to install iTunes 'iTunesSetup.exe was reported as unsafe.'

    Get an error when trying to install iTunes 'iTunesSetup.exe was reported as unsafe.'
    Any suggestions for how to fix this?
    I am using Windows Vista and IE9.

    After using the Windows Installer clean up tool and removing the iTunes 7.0.7.16 install file I was able to update to 7.0.2

  • Edge Animate error when trying to install

    I'm getting an incomplete install when I try to download and install Edge Animate:
    Exit Code: 6
    Please see specific errors below for troubleshooting. For example,  ERROR:
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 1 error(s)
    ----------- Payload: DirectX 10.0.0.0 {9DDAF699-BA5E-48e3-8A09-7AC369D6EEA1} -----------
    ERROR: Third party payload installer DXSETUP.exe failed with exit code: -9

    Re: Edge Animate error when trying to install
    created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
    Edward do you meet or exceed the system requirements listed at http://html.adobe.com/edge/animate/tech-specs.html?
    Jip I sure do!
    I checked the program in discussion just for the heck of it and it works. But when using the Adobe applications manager it says not correctly installed. So I don't know what is going on there!
    It is just unappreciated to have people like Mylenium give such unhelpful replies to customers who are really keen on learning and using your new products.
    (I must probably add that I have tried installing the demo version of Photoshop CS6 when it was just released and caused a serious error. And when I wanted to uninstall it, the uninstaller suggested I use Adobe removal software to remove the demo software... this also did not work properly and I’m still stuck with a error message every time I log on to my windows account)
    But thank for the prompt reply Jeff, keep it up.

  • I am receiving an A12E5 error when trying to install my Creative Cloud desktop

    I am receiving an A12E5 error when trying to install my Creative Cloud desktop. So I cannot proceed to a free trial. Thoughts?

    Hi UniversityDesigner,
    Welcome to the Community!
    Please go through this thread: http://forums.adobe.com/message/5581753#5581753
    Thanks!
    Ankit

  • How do you fix a msvcr80.dll error when trying to install itunes 11.1.4

    How do you fix a msvcr80.dll error when trying to install itunes 11.1.4?

    This also work100% 
    Removing and reinstalling iTunes and other software components
    If applicable, disconnect any iPod or iOS device and close Microsoft Outlook.
    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later).
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (see note 1 below)
    iCloud (if present)
    MobileMe (if present) (see note 2 below)
    Bonjour
    Apple Application Support
    Reboot your computer. Delete any of the following folders where they can be found: (see note 3 below)
    C:\Program Files\Bonjour
    C:\Program Files\Common Files\Apple
    C:\Program Files\iPod
    C:\Program Files\iTunes
    also on 64-bit systems:
    C:\Program Files (x86)\Bonjour
    C:\Program Files (x86)\Common Files\Apple
    C:\Program Files (x86)\iPod
    C:\Program Files (x86)\iTunes
    Download the iTunes setup file and run it to install. Use an account with administrative rights. This can usually be achieved by right-clicking on the downloaded file and selecting Run as... or Run as Administrator. In some cases a combination of Shift or Ctrl keys may be required for the option to show, or it may not be necessary.
    If you deleted iCloud and reinstalling iTunes doesn't automatically reinstall it visit iCloud Control Panel.

  • Currently using Flash Pro CS5,  getting error when trying to open CS4 file.  Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version.

    Currently using Flash Pro CS5,  getting error when trying to open CS4 file.  Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version.  Has there been a fix or patch to this issue or do I have to convert back to CS4 to open the file?

    Having the same problem in CS6.  I can tell you that converting back to CS4 will NOT solve the problem.  It seems when support for backward compatibility is discontinued, there's just no way to get
    any help at all?  Absolute failure to provide any user support so far...

  • "please use setup.exe for installati​on instead of blackberry desktop software.m​si" error when trying to install the software through 610_b038_m​ultilangua​ge.exe

    "please use setup.exe for installation instead of blackberry desktop software.msi" error when trying to install the software through 610_b038_multilanguage.exe
    I need to install this so that i can transfer my contacts and calendar to my laptop

    Hi and Welcome to the Community!
    Sorry to be dense, but what happens when you do exactly as the message instructs?
    Thanks!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Action list not found error when trying to install Flash 11. I have IE8 and windows 32 bit. What can

    action list not found error when trying to install Flash 11. I have IE8 and windows 32 bit. What can I do? Thanks

    Hi, Please try to download the installer from the links provided in the following page: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
    Thanks,
    Sunil

Maybe you are looking for