Get exit from error

Hi all,
i'm currently developing an applet where it does create object for viewing purposes, but if there is no object to be view, i would like it to just exit just like in JAVA System.exit(0); can i done that? thank you

Sure after changing all the security settings you can do this in an applet. Note that if you
do that the browser will crash.

Similar Messages

Host getting exit from Maintenance mode automatically

Hi all,
I have placed a ESXi 5.1 update 2 host into maintenance mode for host upgrade.
After sometime, the host got exit from maintenance mode automatically ( Exit maintenance mode initiated by System).
Have anyone faced this issue??
Any solution/fix for this ...
Please let me know.

In order to uninstall a possibly unwanted extension, please do the following:
#From the Firefox window click the Firefox button at the top left and select ''Add-ons'', or, if the Firefox button is not shown, click the ''Tools'' menu and click ''Add-ons''.
#Once the Add-on Manager has opened in a new tab, click the ''Extensions'' button on the left side of the window.
#You should now see a list of your installed extensions on the right side together with buttons on the right side of each extension.
#To remove an extension from Firefox, simply click the ''Remove'' button. You should see a message that informs you about the successful removal of the add-on.
#Note that some add-ons require a Firefox restart to be removed completely. To perform a Firefox restart after the add-on removal, click the ''Restart now'' link in the message.
You can find further information about uninstalling extensions in the following articles:
[[Disable or remove Add-ons]]
[[Remove a toolbar that has taken over your Firefox search or home page]]

When i try and stream apple tv, i get exited from video. The ticked Apple TV icon reverts back to the IPAD. It tries to load and then exits me...any help/ tips?

I have ticked the apple TV icon, the video then tries to load and then it drops off. The ticked Apple TV icon reverts back to IPAD....it occasionally does load but only 1 time in 10. i have good wifi signal and the ipad always recognises the apple tv icon but the video does not appear...
Any tips appreciated, i have a new ipad air and new Apple TV box

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

DAtapump Import/Export Exit without errors

Hi,
I have cloned a single instacne database into a RAC instance and now here is the problem that am facing.
The EXPDP in the new RAC environment is getting exited without errors . See the error message below.
$ expdp schemas=xxxxdumpfile=SAMP.dmp logfile=SAMP.log directory=DUMPDIR
Export: Release 10.2.0.4.0 - 64bit Production on Monday, 14 February, 2011 18:16:22
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Username: sys as sysdba
Password:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
$
It doesn't throw error nor take backup. It simply quits.
Any suggestions. I googled a lot but now solution.
Please help...

Pl post details of OS and database versions
http://download.oracle.com/docs/cd/E11882_01/server.112/e16536/dp_export.htm#SUTIL2890
HTH
Srini

I am trying to re-install Creative Suite 5.5 Design Standard on my Widows 7 Professional computer after I had to replace the hard drive. I keep getting error message and I get "Exit Code 15: Media DB Sync failed". I have run C Cleaner with same results. H

I am trying to re-install Creative Suite 5.5 Design Standard on my Widows 7 Professional computer after I had to replace the hard drive. I keep getting error message and I get "Exit Code 15: Media DB Sync failed". I have run C Cleaner with same results. Have Disabled UAC and Startup items and Services with no success. Please help - frustrated to no end. Can someone help me?

make sure you're using the adobe cleaner, not crap cleaner, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
copy the installation files to a desktop folder and install from there.

Photoshop CS5 Exit Code 7 Unable to get root from inChildPath

I downloaded the trial version 32 bit and 64 bit, to my desktop (Core I7 3.2 GHZ, 12Gb ram, Win XP Pro 64) and when installing, it doesn't get past 0%, just spits out this:
0 fatal errors, 1 error, 0 warning
Error: Unable to get root from inChildPath
Exit Code:7 Unable to complete silent workflow
I wanted to see if the install files were bad, some I copied to my craptop, which runs Vista 32 bit, and it works fine. Any word yet on what causes this error? Going to check and see if I missed any updates while I wait to see if anyone's had this issue.

Using your links, I can find Adobe's listing for error code 7, but all it tells me is that exit code 7 does not define my problem, but the lines that follow exit code 7 do. Which is the "unable to get root from inChildPath" bit. I might have missed something in your post, but when I poke around the links in the document, and in Adobe's troubleshooting search feature, I can't find anything about the terms "root from inChildPath".
Here's a recap of everything I tried yesterday, note that each error is exactly the same:
At the day's beginning, I had Adobe Master Suite CS4 installed, including PS CS4.
Without un-installing, I attempted to install Photoshop CS5 Trial > Got the error
Copied PS CS5 files to laptop, which also has Master Suite CS4 > Installed fine
Uninstalled Photoshop from Master Suite, then installed PS CS5 > Got the error
Tried to install only 64 bit > Got error
Did "Run As", signed in as admin > Got error
Booted into Safe Mode to install to see if a background process was conflicting > Got error
Reinstalled Master Suite for 6 hours and quit trying...

Exit from Director with error code

Hi all!
How can I exit from director with specifyed error code by
using lingo or JavaScript syntax?
I want to catch its error code in batch file for example to
do something special.
Sample batch file I want to use:
myprojector.exe
if %ERRORLEVEL% == 10 goto GO_TO_SOMETHING_WRONG
But now, by default director quit with error code 0.
Thanks in advance

lis0x90 wrote:
> How can I exit from director with specifyed error code
by using lingo
> or JavaScript syntax?
>
> I want to catch its error code in batch file for example
to do
> something special.
> Sample batch file I want to use:
>
> myprojector.exe
> if %ERRORLEVEL% == 10 goto GO_TO_SOMETHING_WRONG
>
> But now, by default director quit with error code 0.
I don't know of any way to do that, but you could get the
projector to
create a (zero byte) file if there's an error and in the
batch file check
for the existence of that file. (Not forgetting to delete
that file, if it
exists, when the projector starts.)
Andrew

DBcheck get failed from db13 with error BR0301E SQL error -1031

Hi,
I am executing DBcheck from db13 but it gets failed with error "BR0301E SQL error -1031 at location BrDbdiffRead-1, SQL statement".
Here is the job logs:
Job started
Step 001 started (program RSDBAJOB, variant &0000000000424, user ID SVKM_BASIS2)
Execute logical command BRCONNECT On host svkmeccdbci
Parameters: -u / -jid CHECK20110930103211 -c -f check
BR0801I BRCONNECT 7.00 (40)
BR0477I Oracle pfile /oracle/SEP/102_64/dbs/initSEP.ora created from spfile /oracle/SEP/102_64/dbs/spfileSEP.ora
BR0805I Start of BRCONNECT processing: cegwudvg.chk 2011-09-30 10.32.12
BR0484I BRCONNECT log file: /oracle/SEP/sapcheck/cegwudvg.chk
BR0280I BRCONNECT time stamp: 2011-09-30 10.32.12
BR0813I Schema owners found in database SEP:
DBSNMP, DIP, OPS$ORASEP, OPS$SAPSERVICESEP, OPS$SEPADM, ORACLE_OCM, OUTLN, SAPSR3*, SYS, SYSTEM,
TSMSYS
BR0280I BRCONNECT time stamp: 2011-09-30 10.32.20
BR0814I Number of tables in schema of owner SAPSR3: 77207
BR0836I Number of info cube tables found for owner SAPSR3: 49
BR0814I Number of tables/partitions in schema of owner SYS: 625/189
BR0814I Number of tables/partitions in schema of owner SYSTEM: 134/27
BR0280I BRCONNECT time stamp: 2011-09-30 10.32.29
BR0815I Number of indexes in schema of owner SAPSR3: 92099
BR0815I Number of indexes/partitions in schema ofowner SYS: 678/199
BR0815I Number of indexes/partitions in schema ofowner SYSTEM: 175/32
BR0280I BRCONNECT time stamp: 2011-09-30 10.32.52
BR0816I Number of segments in schema of owner DBSNMP: 25
BR0816I Number of segments in schema of owner OPS$SEPADM: 1
BR0816I Number of segments in schema of owner OUTLN: 9
BR0816I Number of segments/LOBs in schema of owner SAPSR3: 174072/2383
BR0816I Number of segments/LOBs in schema of owner SYS: 1838/87
BR0816I Number of segments/LOBs in schema of owner SYSTEM: 353/22
BR0816I Number of segments in schema of owner TSMSYS: 4
BR0280I BRCONNECT time stamp: 2011-09-30 10.32.52
BR0961I Number of conditions found in DBCHECKORA:118
BR0280I BRCONNECT time stamp: 2011-09-30 10.32.52
BR0301E SQL error -1031 at location BrDbdiffRead-1, SQL statement:
'PREPARE stmt_5 STATEMENT FROM'
'SELECT OBJNAME FROM "SAPSR3".DBDIFF WHERE DBSYS IN ('ORACLE', ' ') AND OBJTYPE = 'TABL' AND DIFFKIND IN ('02', '61', '99') ORDE
ORA-01031: insufficient privileges
BR0806I End of BRCONNECT processing: cegwudvg.chk2011-09-30 10.32.52
BR0280I BRCONNECT time stamp: 2011-09-30 10.32.52
BR0804I BRCONNECT terminated with errors
External program terminated with exit code 3
BRCONNECT returned error status E
Job finished
Please help.
Thanks in advanced.
Ocean

Dear,
Thanks for the reply.
I have checked the note you have mention, but it show it is for SAP Release 6.20 or lower.
we have ECC6 EHP4 release 700.
So, please advise, should i go for that note and perform the required action ?
Thanks.

Exiting from OSB pipeline when application error occurs

Hi
My proxy exposes 3 operations to the consumers though WSDL with different inputs and similar output formats. For all these 3 operations there is a common service to be called before actually get into the operational branch that i created for handling these operations. so the message flow would be like below:
pipelinepair1 -> stage1 in pipeline1 ->service callout -> opeartional branch.
I am manipulating the response n respone line of pipeline1 for all the operations as its similar strcuture. If an application error arises in service callout the error will be in the body. so if the error raise i should directly exit from message flow in service callout itself wthout proceeding to operational branch. So i tried with reply action, though i am existing from OSB its not going into response pipeline of pipelinepair1. How can i handle this scenario? i don't want to put the same thing in service callout response pipeline again. Please let me know your insights.
Thanks
Siva

This could be done in different ways... why you need to manipulate the response in response pipeline only.
When your service call out fails do a 'Raise error' action.. and process the reply in stage error handler which will complete with a "reply with failue ( or success) action. if you have not configured an stage error handler, you need to do this in the service error handler.
As this is an error case it is apt you handle this at the error pipeline( stage or service error handler) rather than the response pipeline.

Error when exiting from ANY JavaFX app. (any workaround?)

I've had an ongoing problem when working with JavaFX, and even using applications created with it like SceneBuilder and FXExperience tools. As I reported in this bug: http://javafx-jira.kenai.com/browse/RT-27458 , any time I exit from any application that uses JavaFX, I get an error. My bug turned out to be a duplicate, and looking at the other report, it seems to be a result of the combination of the ATI-Radeon graphics card, Ubuntu, and JavaFX. It doesn't seem to matter whether the app is solely JavaFX, or embedded in Swing, whether it is installed as a native bundle or run directly from class files, or an executable jar. If it uses JavaFX and I run it, when I close it I get this error. It also doesn't matter whether I use jdk7 or an early-access build of jdk8.
This is becoming increasingly irritating as I further explore the technology and begin trying to work with it, going beyond simply following tutorials and whatnot, because it means I frequently run my programs to see if they actually work, and am much more frequently using tools like SceneBuilder. It doesn't seem to matter whether I run things from the command line, start them from an IDE, or in the case of installed applications, run them through Ubuntu's Launcher or Dash, when I exit I get an error message and an error log shows up somewhere. Especially when testing an application I'm working on, these logs quickly clutter up my directories and become an annoyance.
Does anyone have any suggestions or workarounds which might help avoid some of the annoyances from the problem? I have the ability to dual-boot Windows 7, and as the problem becomes increasingly annoying, have given some thought to doing my development there. However, I'm really not very comfortable in Windows, and it would involve making some pretty big changes to my workflow, so this isn't my favorite option.
I imagine that using another distro like Linux Mint would probably continue to have the same issues, since I think it would be using the same drivers for the graphics.
Changing computers is not currently an option for me. I'd love a Mac to develop on, but that's just not possible currently.
If anyone has any ideas, suggestions, workaround or tips I would greatly appreciate them. Thanks in advance for your help.

Okay. Do you have any third-party iTunes plug-ins/add-ons installed?
(They can sometimes produce similar symptoms if they were written for an earlier version of iTunes, and they aren't liking a new version ... last time I can think of a major outbreak of add-on-related crashes-when-quitting was with the transition from iTunes versions 6.0.x to 7.0.x, though.)
If so, the following document might be of some assistance:
Troubleshooting issues with 3rd-party iTunes add-ons

How to exit from method if there is any Error message

Hi All,
I have one button (Retrieve) and on that button I am calling a method(OnRetrive) and in that method i am calling func module and in that i am getting some messages.
<b>Now If that FM gives Error message then i have to exit from that method without processing further code.</b>
How can i do this? Help!!!
Expecting your reply ASAP.

Use the RETURN statement. It will get out of your method.
Regards
Nithya

SDK 2015.1 xsct gets fatal JVM error on exit

After executing various sdk commands from a xsct shell on 64-bit Windows 7, I get the following error when I exit from the shell:
A fatal error has been detected by the Java Runtime Environment:
Lots of useless debug data then gets dumped to a log file.
Executing any of these commands causes the error on exit (both from the xsct shell and from batch files that invoke the shell):
sdk set_user_repo_path
sdk create_hw_project
sdk import_projects
The sdk set_workspace command doesn't seem to cause this error. I haven't tried any other sdk commands.
Note all the commands in my tcl script finish executing. The error occurs when exiting xsct.
Is there a way to avoid this error?
Thanks.
-steve

Hi Vinay:
The command you suggested does not exist:
C:\projects\hamid\imax\github\IMAX_git\sw\fpga\kc705_hdmi_workspace> xsdk -jvm Xmx4096m
unrecognised option '-jvm'
Display Options:
-help
Help -- just display this message and quit.
-version
Display Version and quit.
-batch
SDK Tcl Batch Mode.
-wait
Wait for SDK to complete.
Options:
-workspace <Workspace location>
Specify the Workspace directory for SDK projects
-hwspec <hardware specification file>
Specify the XML file to load.
-bit <bitstream file>
Specify the Bitsteam file to use for programming FPGA
-bmm <bmm file>
Specify the BMM file to use for BRAM initialization
-batch -source <tcl script file>
Specify tcl Script file to executee all commands in SDK batch mode
{-lp <repository_path>}
Add <repository_path> to the list of Driver/OS/Library search directories.
-eclipseargs <eclipse arguments>
Any other arguments that should be passed to Eclipse.
This should follow all other SDK arguments.
-vmargs <java vm arguments>
Any other arguments that should be passed to Java VM.
This should follow all other SDK arguments.

Powerpivot Error on Refresh -- "We couldn't get data from the data model..."

I'm using Excel 2013 and Windows 8.1. I have a spreadsheet I've been using for over a year, and I've just started getting this error message when I try to refresh the data.
"We couldn't get data from the Data Model. Here's the error message we got:
The 'attributeRelationship' with 'AttributeID' - 'PuttDistCat9' doesn't exist in the collection"
Any idea how I can fix this problem? I haven't changed anything related to that particular attribute. All the data is contained in separate sheets in the workbook, so there are no external sources of data.
Thanks.
Jean

Thanks for all the suggestions.
I found a slightly older version of the spreadsheet that still refreshes properly, so I don't think I have any issues with the version of Excel or Power Query. (I've had this same error before, and I believe I applied the hotfix at that time.)
I think this problem started after I updated a number of the date filters in the pivot tables. I haven't made any changes to the data model, and the only updates I've made were to add data (which I do all the time), and to change the date filters on
the pivot tables.
As suggested, I added a new pivot table querying one table (the table with the attribute that shows up in the error message), and it worked fine. I can also refresh this pivot table.
Then I tried adding a pivot table which went against several tables in the data model (including the table in question). The pivot table seemed to return that data properly. However, when I tried to refresh it, I got the same error message ("we
couldn't get data from the data model...").
Dany also suggested running the queries one at a time to see which one is in error. Without checking all the pivot tables, it appears that any which use the table "HolePlayedStrokes" generate the error (this is the table with the attribute
mentioned in the error message). Pivot Tables without that particular table seem to refresh OK. Unfortunately, that is the main table in my data model, so most of the pivot tables use it.
Any other suggestions? I'd be happy to send a copy of the spreadsheet.
Thanks for all the help.
Jean

I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the inst

I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the installation package 'iTunes.msi' in a folder from which you can install iTunes. I can't find this folder. I have tried to completely unistall iTunes through the Control Panel, but it wouldn't let me: I tried going directly to the files themselves, but cannot uninstall. Any help would be greatly appreciated. System OS: Win XP SP 3.

Set the permissions for Everyone in the folder in which CCPackager created, to "Read/Write" enabled. This is strange since there is only an administrator account on the Mac (and that account already has read/write), but it seems to resolve the issue.

TS4123 A recent download of an iTines update - for whatever reason - failed on my computer. Since then I get a system error statement telling me that the program cannot open because 'MSVCR80.d11' is missing from my computer. When I attempt to open iTune

A recent download of an iTunes update, for some unknown reason, failed on my computer. Since then I get a system error message everytime I log on telling me that the program cannot be opened because 'MSVCR80.d11' is missing from my computer. When I try to open iTunes I get an 'error 7 (Windows error 126)' message and am advised to reinstall iTunes. However, when I attempt to do this, it downloads the programme and gets as far as installation, at which point I get yet another message: this time 'Service Apple Mobile Device failed to start'.
I am at a loss to know what to try next and would appreciate any assistance. I'm also concerned that, in the process of reinstalling iTunes, I am going to lose all the music I have collected over the years.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99602)

Get exit from error

Similar Messages

Maybe you are looking for