GET FILE NAME C:\temp\ADIBO.txt

Hi,
How to get file name?
I used Get_File_NAME, but I'am getting an error.
lv_lfilename is not the type LOGICAL_FILENAME
C:\temp\ADIBO.txt
I need to get ADIBO ??
tnh, Adibo..:)
I am using this code to download file and after that I need to get FILE_NAME:
DATA: lv_lfilename TYPE string.
PARAMETERS:
pa_lfile TYPE zlocalfile
           DEFAULT 'C:temp'.
    CONCATENATE pa_lfile ''INTO lv_lfilename.
    CALL FUNCTION 'GUI_DOWNLOAD'
         EXPORTING
              filename = lv_lfilename
              filetype = 'ASC'
         TABLES
              data_tab = it_billit_down.
    IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.

Hii..
You have to Maintain the Logical filenames and their Physical Paths in Tcode FILE.
Then create a program like this..
REPORT ZSEL_FILES1.
DATA : V_LOGFILE TYPE STRING.
DATA :V_PHYFILE TYPE STRING.
DATA : ITAB TYPE TABLE OF SCARR.
START-OF-SELECTION.
SELECT * FROM SCARR INTO TABLE ITAB.
**To get the Physical file based on the Logical file names - Maintained in Tcode FILE
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
   CLIENT                        = SY-MANDT
    LOGICAL_FILENAME              = VlOGFILE
OPERATING_SYSTEM              = SY-OPSYS
PARAMETER_1                   = ' '
PARAMETER_2                   = ' '
PARAMETER_3                   = ' '
USE_PRESENTATION_SERVER       = ' '
WITH_FILE_EXTENSION           = ' '
USE_BUFFER                    = ' '
ELEMINATE_BLANKS              = 'X'
IMPORTING
EMERGENCY_FLAG                =
FILE_FORMAT                   =
   FILE_NAME                     = V_PHYFILE
EXCEPTIONS
FILE_NOT_FOUND                = 1
OTHERS                        = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
**To download the file to PC.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE                    =
    FILENAME                        = V_PHYFILE
   FILETYPE                        = 'ASC'
APPEND                          = ' '
   WRITE_FIELD_SEPARATOR           = 'X'
HEADER                          = '00'
TRUNC_TRAILING_BLANKS           = ' '
WRITE_LF                        = 'X'
COL_SELECT                      = ' '
COL_SELECT_MASK                 = ' '
DAT_MODE                        = ' '
CONFIRM_OVERWRITE               = ' '
NO_AUTH_CHECK                   = ' '
CODEPAGE                        = ' '
IGNORE_CERR                     = ABAP_TRUE
REPLACEMENT                     = '#'
WRITE_BOM                       = ' '
TRUNC_TRAILING_BLANKS_EOL       = 'X'
WK1_N_FORMAT                    = ' '
WK1_N_SIZE                      = ' '
WK1_T_FORMAT                    = ' '
WK1_T_SIZE                      = ' '
IMPORTING
FILELENGTH                      =
TABLES
    DATA_TAB                        = ITAB
FIELDNAMES                      =
EXCEPTIONS
FILE_WRITE_ERROR                = 1
NO_BATCH                        = 2
GUI_REFUSE_FILETRANSFER         = 3
INVALID_TYPE                    = 4
NO_AUTHORITY                    = 5
UNKNOWN_ERROR                   = 6
HEADER_NOT_ALLOWED              = 7
SEPARATOR_NOT_ALLOWED           = 8
FILESIZE_NOT_ALLOWED            = 9
HEADER_TOO_LONG                 = 10
DP_ERROR_CREATE                 = 11
DP_ERROR_SEND                   = 12
DP_ERROR_WRITE                  = 13
UNKNOWN_DP_ERROR                = 14
ACCESS_DENIED                   = 15
DP_OUT_OF_MEMORY                = 16
DISK_FULL                       = 17
DP_TIMEOUT                      = 18
FILE_NOT_FOUND                  = 19
DATAPROVIDER_EXCEPTION          = 20
CONTROL_FLUSH_ERROR             = 21
OTHERS                          = 22
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
<b>reward if helpful</b>

Similar Messages

OS command to get file name

Hello All,
Using a single receiver communication channel I have to generate 2 output files.
One output file name is OUTPUT.txt and the second output file name is OUTPUT<YYYYMMDD>.txt
I am generating first output file name using standard file name scheme.
And for generating second output file name I am using Run OS command option.
can some one tell me the OS command to get the file name OUTPUT<YYYYMMDD>.txt?
Thanx,
Regards,
Moorthy

We would really like like to know how you are going to create 2 file (with different names) using same CC.
If you are going to use "Add timestamp" then both the files will have timestamp at the end (unlike your requirement for the first file).
I think its better to create 2 CC ..first with output.txt and the other OUTPUT<YYYYMMDD>.txt
Also, please tell us more about ur requirment..if the content is same then..u can simply use a CC and use OS command (after processing option ) to copy it to the other location with required file name (OUTPUT<YYYYMMDD>.txt)
Something like this if u r using unix system and both the files are at same location:
cp OUTPUT.txt OUTPUT2.txt

Error in reciever file adapter , where i am getting file name dynamically

hi all,
error in reciever file adapter , where i am getting file name dynamically, please help me in this isssue , i am trying for a long time
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:MT_eINVOICE_RECV' found in document', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:MT_eINVOICE_RECV' found in document', probably configuration error in file adapter (XML parser error)'

i am getting new error
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
this is my strcuture
and i have changed my structure
<HEADER>
<ADDRESS1/>
<ADDRESS2/>
<ADDRESS3/>
<ADDRESS4/>
</HEADER>
<HEADER_GST>
<TAX1/>
<TAX2/>
<TAX3/>
</HEADER_GST>
<LINE>
<QTY/>
<UOM/>
<UNIT_AMT/>
<CHARGE_TO_DT/>
</LINE>
<FILENAME>
<FILENAME/>
</FILENAME>
i have given the recordset structure as
HEADER,HEADER_GST,LINE,FILE

How to get file name of the form attachment?

Hi,
is there anybody who is able to help me with the following problem???
I started my process from Workspace ES and as a first step I attached one locale file (IMG.JPG or IMG.TIF e.g.) as a form attachment. I used "Attachments" bookmark in the Workspace ES.
I need to get file name of attached file in the process!!!
I tried to use "getTaskAttachments" component to get file name of form attachment but without success. This component successfully obtained attached file an stored it in the variable (type list, subtype document) but didn't produce all file attribute informations such as basename or Content Type:
Is there some possibility to obtain file name (including file extension) by using "standard" tools and components of ALC?
Thanks for your suggestions.

Hi LekomDev,
I faced the same situation some time back and this is what I know.
Based on the file type few of the attributes will or will not be populated. (This is what the official documentation says about Document attributes)
The file name that you are looking for would mostly be in 'name' attribute of Document object. The 'wsfilename' attribute is the atrribute which gets used to show the file name into Attachments tab of the workspace.
So, if you are just interested in knowing the filenames then 'name' attribute is the place that you are looking for.
But if you are trying to solve an issue in which Attachments against a Task isn't showing the filenames properly then you would need to copy the 'name' attribute value into 'wsfilename' attribute and then the Attachmetns against a Task would have the correct names.
Tip: Use the Record and Playback option of the workbench to inspect the Document variable and you would see all of the values for a Document variable at desired step in your orchestration.
hope this helps,
cheers,
Parth Pandya
Blog: http://livecyclekarma.wordpress.com

Need to get file name and directory back from file adapter - WRITE

I am using the file adapter to write a file. I want to log the file name of the file we just created. Since we use a precise timestamp in the file name, I can't accurately guess.
I have an invoke in my BPEL process to the file adapter. My first try was to assign the jca.file.FileName property to a variable, but it never comes back. I looked around and saw plenty of ways to SET the file name for a write and GET the file name for a read, but no GET file name for WRITE.
Anyone have a solution?
Thanks in advance!

I think I got your point... You can tell FileAdapter the filename to write, but if you don't then FileAdapter can not tell you the filename that it wrote... I think it is pretty possible Oracle didn't implement the latter, as the write operation is probably asynchronous and the filename is calculated later on...
If what you want is just log, you may achieve your requirement by increasing verbosity on Adapter logs... Have a look at the link bellow...
http://docs.oracle.com/cd/E15586_01/integration.1111/e10226/ad_mon.htm#CJHHBBID
Otherwise, the solution for you will be to calculate filename yourself, and that will be a little bit of reinventing the wheel... But at least you will know the filename...
Cheers,
Vlad

Get file name from folder

Hi all,
how to find a .txt file in a particular folder. My text file comes with
following name <fixed_name>.<mmddyy><hhmmss>, e.g., fn_fnprod.102806015605
so how to get this file name. nd also tell me if there are multiple files
then how to retrieve the oldest one first and so on....
Thanks & Regards
Gaurav

it's fine but how to know which is older file b'cpz
this file comes every day with new date & time. so
what if there a multiple file. nd i have proceed
oldest first.
pls help asapget each file last modifed, using file.lastModified() method and compare which file you would be needing. =)

Get File Name in a package

Hi,
I have a interface File to DB. In the source exist many files with name mask ccf_*.txt. Im use a ODIFileWait to start my process, but i cant get the file name to use in my interface. How i do to get the file name processed in the ODIFileWait?
Thanks

I have the same problem...

Query to get file name of field

Hi folks,
I have one field in SQL table with whole file names:
e.g
C:\Directory1\File 1.txt
C:\Drirectory2\SubDirectory1\Image 33.jpg
I need one query to show only the file names:
e.g
File 1.txt
Image 33.jpg
What I need to do to get only the file names as result of query?

create table test (filenames varchar(100))
insert into test values ('C:\Directory1\File 1.txt'),('C:\Drirectory2\SubDirectory1\Image 33.jpg'),('aaa'),(null)
select Reverse(stuff(reverse(filenames)
, Case when Charindex('\',reverse(filenames))>0 then Charindex('\',reverse(filenames)) else len(filenames) end
, Case when Charindex('\',reverse(filenames))>0 then len(filenames) else 0 End
,'')) fileCol from test
--Or
SELECT Distinct Coalesce(S.a.value('(/H/r)[4]', 'VARCHAR(100)'), S.a.value('(/H/r)[3]', 'VARCHAR(100)'), S.a.value('(/H/r)[2]', 'VARCHAR(100)'), S.a.value('(/H/r)[1]', 'VARCHAR(100)') ) AS fileCol
FROM
SELECT *,CAST (N'<H><r>' + REPLACE(filenames, '\', '</r><r>') + '</r></H>' AS XML) AS [vals]
FROM test) d
CROSS APPLY d.[vals].nodes('/H/r') S(a)
drop table test

Target file name-'YYYYMMDD-HHMMSSMMM- test .txt

Hi Experts,
We have a requirement where we need target filename as 'YYYYMMDD-HHMMSSMMM-test.txt'. Kindly suggest can we get this filename without using Variable Substitution and Dynamic Configuration.
Regards,
Sudha

Hi Sudha,
If your requirement is to avoid using Variable Substitution and Dynamic Configuration, you can always use an Operating System Command After Processing that you will define in the Receiver Communication Channel. You can use it to change the file name of the file that just got created, and add the timestamp at the beginning.
Hope this helps,
Greg

Get File name of the inbound file during mapping

Scenario: to read the file name of the inbound file (which has date required for the mapping) during runtime.
The requirement is to read the date of the inbound file (passed to the XI pipline by the file adapter) and populate the same in the outbound mapping structure.
Any idea about how to do this?
(I went through few options of using java.util.map. not successful yet)

Hi Anand,
I posted the same question a time ago, without any help....
Can I find out the full filename of input file in message mapping?
Posted: Nov 23, 2004 1:00 PM
I have in XI 2.0 the following scenario :
In the inbound fileadapter I read my input file. The filename of the input file is part fixed, part variable (Like INDATA01.txt, INDATA03.txt, etc).
So in my Adapterconfiguration, I specify the filename with a wildcard (INDATA*.txt).
What I now want to do, is in my Message Mapping use the full filename , so I can do something different for every filenumber. Is there a way where I can get the full filename available in my message mapping (I did not find the filename in the XML in the message trace).

How to get file name on the base of extension

hi
reply me
how to get the filename on the base of extension from the
current directory......
for example
i create file with the "igg" extension and save in the folder
where the exe file of director save....
i want when exe run then exe file read filename of the
define( "igg" ) extension with out path just name of the file with
igg extension
tel me how
regards
farhana khan

Here's a solution that requires no xtras:
on GetFilesWithExtension(aFolderPath, aExtension)
-- INPUT: <aFolderPath> should be a valid string
folder path
-- <aExtension> may be a string file extension,
without the
-- dot. For example: "txt" or "igg"
-- OUTPUT: Returns an error symbol or a linear list of file
names
-- in the given folder. If an extension is given, only
-- files with the given extension will be listed. If not,
-- all files and folders will be listed.
vFileList = []
if not stringP(aFolderPath) then
return #stringPathExpected
end if
vIgnoreExtension = not stringP(aExtension)
vDelimiter = the itemDelimiter
the itemDelimiter = "."
n = 0
repeat while TRUE
n = n + 1
vFileName = getNthFileNameInFolder(aFolderPath, n)
if vFileName = "" then
exit repeat
end if
if vIgnoreExtension then
vFileList.append(vFileName)
else if the last item of vFileName = aExtension then
vFileList.append(vFileName)
end if
end repeat
the itemDelimiter = vDelimiter
return vFileList
end GetFilesWithExtension
You can also use
Buddy API's baFileList,
which allows you to do wildcard searching.

Get file name and received date & time

Hello experts,
We are loading around 10 source files(xml) on regular basis to Target table. I have to capture source filename & received datetime of those files and status of file whether it loaded successfully or not(I can care take care of status of file). I want to automate this process using BODS and load filename, datetime and status data into one database table.
For you information: File name looks like QAS_Wareneingang_20140328-190006-438. ( from file name ..190006-438 number is random number they are generating) and Date and time is constant for that day eg: 28.03.2014 19:00
Could you please help me...
Thanks & regards
Mohan

Thank you Arun for your kind help...
I found a solution to find and move all related filenames with timestamp to file_names.txt file using the batch script below.
@echo on
cd /D G:\BAUR
dir /n Auslagerung* > G:\Dev_Users\BAUR\file_names.txt
exit
After that I used the above file as source and formatted using query transform in BODS.

Get File name from incoming IDoc

HI All,
I am in an IDOC to File scenario using Fcc. (R/3 --> XI --> 3rd party)
I need to use the idoc-number(EDI_DC40-Docnum) as my output file name. I planned using variable substitution but there it expects me to get the idoc number from payload which I do not have it in. (refer c ode below)
As I understand, variable substitution can be used only on payload(the FINAL data set that we will be writing to the file).
Can we use the data which is part of incoming IDOC and not part of payload(final data what we are writing to file).??
Other idea was to map this IDOC no to a field in final file, but this field should not be written in the output file, so am confused about how to achieve this.
E.g
*Incoming Data*
IDOC
|_EDI_DC40
|_DOCNUM
Final data (Payload)
Header
Data
Trailer
As seen in my example above I do not have the IDOC no in the final data so how do I use the Idoc no as my filename? Apprecaite your help on same.
Regards
Shirin

Hi
You can use dynamic configuration to get the file name .
Use Adapter Specific Message Attributes for the target Comm Chanel check the indicator for filename in the advanced tab of CC
create a UDF with i/p as file name i.e the Idocnum field and
paste this code
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
//conf.removeAll();
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
//String filename= conf.get(key);
conf.put(key, fileName);
key= null;
return fileName;
PS: use cache as value in UDF
ands assign the o/p of this UDF to a root node

Get file name

Hello world,
Am writing a small server application that can accept files and save them locally. Now, the server is working, but am finding it very hard to get the name of the file that's been sent so that I can save the file with that name and its extension.
e.g. I want if I sent a hello.java file, then, the server will save it as hello.java. But at the moment, its not saving it like that because there is no way can get the name of the file from the client.
Here is my code:
import java.io.*;
import java.net.*;
class Server {
    static final String ToSave = "C:\\";
    static final int PORT               = 2391;
    public static void main(String args[]) {
        while ( true ) {
            try {
                ServerSocket socketServer = new ServerSocket(PORT);
                Socket socket = socketServer.accept();
                //Assuming we have a file name (FILENAME)from client
                FileOutputStream fos = new FileOutputStream(ToSave + FILENAME);//<--HERE IS WERE i WANT THE FILENAME
                BufferedOutputStream out = new BufferedOutputStream(fos);
                BufferedInputStream in = new BufferedInputStream( socket.getInputStream() );
                int i;
                while ((i = in.read()) != -1) {
                    out.write(i);
                out.flush();
                in.close();
                out.close();
                socket.close();
                socketServer.close();
                System.out.println("Transfer complete.");
            catch(Exception e) {
                System.out.print( e );
            try {
                Thread.sleep(1000);
            } catch (InterruptedException ie) {
                System.err.println("Interrupted");
}

You have to define a protocol which enables the
client to tell the server the file name.
BTW creating server sockets inside a loop is not a
good idea.
Thank you very much :)
I've got the idea on how to implement it now. All I have to do is:
first connect to the server and send a message containing the name of the file and then, at the server end, I will receive the name and use it to save to incoming file.
Thanks again.

How can I get file name using JSTL ?

Hi,
I'm now using <c:out value="${pageContext.request.requestURI}"/>
this return servlet path
How can I get just file name
or user path (in location bar) ?
thanks in advance

The original uri (before forwarding) is available in a request scoped attribute.
These attributes are given the values obtained by calling the related method on the original request received by the container.
javax.servlet.forward.request_uri
javax.servlet.forward.context_path
javax.servlet.forward.servlet_path
javax.servlet.forward.path_info
javax.servlet.forward.query_stringSo if those two above don't work for you these might.
<c:out value="${requestScope['javax.servlet.forward.request_uri']}"/>
<c:out value="${requestScope['javax.servlet.forward.servlet_path']}"/>If these values are null, then the value in the request object is the correct one.
You mentioned the value in the address bar being a .html file. Do you perchance use framesets? If so the value in the address bar is always the url used to load the frameset, and doesn't change no matter where you travel within those frames. That won't be available to the server, because it has nothing to do with the current request.
Cheers,
evnafets

GET FILE NAME C:\temp\ADIBO.txt

Similar Messages

Maybe you are looking for