Get File name using File Adapter

Does anyone know how to get the file name that has been picked up so it can be past to a variable so it can be used in the BPEL process.
cheers
James

Hi James,
Here the STEPS,
Create File Adapter.
Add File Adapter Service to Receive Activity.
Click Receive Activity and goto Adapters Tab.
Click "Tourch" to get variable names.
Select Variable -> Process -> Variables and Click on "Create New Variable" icon and give name.
Select "Message Type" and click "Tourch" icon.
Now you select "Partner Links" -> FileAdapter WSDL -> Imported WSDL -> Message Type -> InboundHeader_msg and select OK.
It's done.
now you can use this Global Variable to get Filename and Directory name.
Regards,
Bhavesh Thaker.

Similar Messages

  • Same file name using JMS adapter on sender side.

    Hi Friends,
    I got a requirement to capture file name using JMS adapter on the sender side.
    Can some one help me in resolving this issue.
    Regards,
    Jeevan.

    Hi ,
    You can use Dynamic Configuration in mapping.
    Create a UDF with input as file name and copy/paste this code
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    //conf.removeAll();
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    //String filename= conf.get(key);
    conf.put(key, fileName);
    key= null;
    return fileName;
    Thanks.

  • Hoe to logical file name using "FILE" transcation

    I want to create a logical file name using  "FILE" transaction , i have file path '/xfer/OUT/IDD0230 ' that cureently hard coded in program but i want to avoid hard code .

    You need to go to FILE transction, create new entry.
    You need to specify Physical name i.e value hardcoded in your program
    and corresponding new Logical Path which enduser will be entering.
    In code u ned to decode Logical path to physical path as its actual path.
    Award points if helpful.
    Shital

  • How to get file name using File adapter Sync read

    Hi All,
    I am using SOA 10.1.3.3 and JDEV 10.1.3.3.
    I have an async bpel process.
    I have to read file name in this process... so i have used file adapter sync read operation.
    How can we get the file name with out payload using sync read.
    For normal read (Inbound Spec)we have UseHeaders="true" property.
    Is there any property for sync read to read the file name.
    Please help me
    Regards
    PavanKumar.M
    Edited by: [email protected] on Oct 27, 2009 11:23 PM

    Hi Eric,
    The info in the link provided by you is for a normal read.
    I need to read he file name using Sync read operation.
    Regards
    PavanKumar.M

  • How to get the incoming file name using JMS adapter and SOAP adapter

    Hi Everybody,
       In one of my interface i need to get the file name of incoming flat file using JMS adapter at sender side. and then i am using xslt to convert it to IDOC and then posting to  SAP IDOC.
    my incoming filname are in this form price<DateTimestamp>.txt. when i do the tranformation this incoming file name should be part of one element in the IDOC which i am posting.
    EX:
    <IDOC
    <REF>price<DateTimestamp>.txt</REF>
    </IDOC>
    Hope it is clear to everybody. I need your suggestion how i can capture this incoming file name and send it as part of IDOC.
    Thanks
    raj

    If they are passing it in message id or correlation id,
    you can access it using
    <xsl:variable name="dynamic-conf" 
            select="map:get($inputparam, 'DynamicConfiguration')" />
        <xsl:variable name="dynamic-key"  
            select="key:create('http://sap.com/xi/XI/System/JMS', 'DCJMSMessageID/ DCJMSCorrelationID')" />
        <xsl:variable name="dynamic-value"
            select="dyn:get($dynamic-conf, $dynamic-key)" />
    Check this:
    http://help.sap.com/saphelp_nw70/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/content.htm
    Thanks,
    Beena.

  • Custom File name using File Adapter

    Hello All,
    Is it possible to name the file based on a particular XML tag? may be use an xpath expression? My requirement is to create a file name something like PO_<PO-NUM>.xml rather than using any sequence or time stamp.
    Thanks.

    Should i change anything in the file adapter's .jca file? possibly this property?
    <property name="FileNamingConvention" value="PO%SEQ%.xml"/>

  • How To Control The Archive File Name using file adpater or OSB file traspor

    Hi all,
    My requirement is I want to archive a file by appending my BPEL instant id to the file name.
    Is this possible changing the file name when archive the file???
    Thanks
    Phani

    I couldn't find that out when I had the same requirement. I was running out of time, so I let Archive functionality works as it works and used the write file option with opaque schema.

  • Dynamic file name using FTP adapter

    I was trying the dynamic filename scenario taking help from Michal's blog https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2664. [original link is broken] [original link is broken] [original link is broken] [original link is broken]
    If I check the 'adapter specific properties' in both sender and receiver file adapter,then in output I am getting the output filename as same as input filename without using the UDF.
    When I used the UDF in mapping,it had absolutely no effect. I am not clear what is the use of the UDF. please let me know where to use the UDF and how to use it.
    Thanks
    Smith

    1. In the mapping program that you are using populate the filename coming from the source into the target in any of the fileds.
    2.Sender adapters can write adapter-specific attributes to the message header; these can then be evaluated at configuration time.You can get dynamic filename in UDF in msg mapping....just in ID in comm channel select adapter specific attributes -> filename.....then whatever dynamic name you will create in UDF will be the target filename.....
    3. To change the adapter-specific attributes of the message header by using message mappings, you access the <b>required classes of the mapping API by using a mapping runtime constant.</b>
    To access the classes DynamicConfiguration and DynamicConfigurationKey by using the mapping runtime constant DYNAMIC_CONFIGURATION, use the method getTransformationParameters() of the container object.
    You donot need to hard code the value of the filename in the file adapter for your interface.
    In SXMB_MONI, when you see the pipeline services you would see that the value of the filename is populated in the message payload.

  • How to find the File name using the FTP Adapter

    hi all,
    how to find the File name using the FTP Adapter with BPEL.
    Regards

    Found the solution for this.
    First In the mediator's routing rule use assign property $in.property.jca.file.FileName to $out.property.jca.file.FileName
    In the BPEL's receive activity go to the properties tab and get the property to a BPEL variable. That should do it.
    Thanks for the posts

  • Dynamic Receiver file name in AS2 adapter

    Hi Experts,
    How to get dynamic receiver file name in AS2 adapter. We need receiver file name same as of sender file name.
    We tried selecting dynamic attributes file name but we are getting followin error in CC.
    Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: com.seeburger.xi.connector.queue.TaskBuildException: Mandatory attribute dtAS2FileName is not present in XI message., Mandatory attribute dtAS2FileName is not present in XI message.
    Thanks,
    Hari

    hi hari,
    You can't do it manually. As both adapter are in different context.
    You can go with UDF to slove ur problem.
    Just extract the input file name using Dynamic configuration
    Store that in some variable.
    Use same name in the dynamic file name in AS2 receiver. Below code might be useful.
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://seeburger.com/xi/common/dtAS2FileName", "DYNFILENAME");
    conf.put(key,strfilename);
    Thanks
    Jai
    Edited by: Jaideep Baid on Apr 9, 2010 9:16 AM

  • Xml file in dynamic file name in file receiver adapter

    Hi,
    I'm doing the dynamic file name in file receiver adapter. I have done as per instructed in /people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i
    All turned out okay. I have got the file name I require. Except that the file format is XML and I need to suppress the filename node occupied by the dynamic file name.
    The content conversion mentioned in /people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12, does not seem to solve my problem. As it is only for file format other than the XML one, because we only do the content conversion if we want to "convert" the format of the content from XML to the other format.
    Does anybody have the solution to my problem? thanks in advance

    Thank you Raj for the direction
    The way to do it is :
    1. In ID, advanced tab, put a check on the adapter-specific message attributes - file name.
    2. Put a "*" on the file name scheme
    3. In IR, create a UDF to set up target file name :
    DynamicConfiguration conf = (DynamicConfiguration) container
    .getTransformationParameters()
    .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    // set up file name for receiver adapter
    String SourceFileName = conf.get(key);
    conf.put(key, TargetFileName);
    return " ";
    4. Map the above UDF to the header level of the target structure.
    Regards,
    Idi

  • How should we get the out put file-name same as in put file-name in file to

    Hi frnds,
    having hundreds of files in the sender system with different names, how should we get the out put file-name  in the receiver system same as the in put file-name in file to file scenario ?
    Thanks in advance.
    truly,
    snrvakiti.

    Hi,
    In Receiver File Adapter you can set under 'Adapter-Specific Message Properties'
    check Use Adapter-Specific Message Properties
    check Fail on Missing Adapter Message Properties
    Check File Name
    Have a look at this link,  [File_to_File|http://allsapnetweavernotes.blogspot.com/2008/09/how-can-i-access-filename-from-fileftp.html]
    Regards,
    P.Rajesh

  • Selection of Folder/File name using the same Fun.Module

    Please let me know if there is a function module which can fetch folder name/File name  from the directory path when f4 option of selection screen field is selected. Currently I am able to get the file name using FM F4_DXFILENAME_4_DYNP but the requirment is like I have to select either folder name or the file name depending on user selection.
    Note: Please let me know if there is a single Function module which can get folder name or the file name based on the user selection.i.e, if the user want to select a folder he can select or he can select files in the folder for processing

    Hi sridhar
    try this:
    PARAMETER : TXT_FILE(100).
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR TXT_FILE.
    PERFORM GETFILE.
    start-of-selection.
    PERFORM GETDATA.
    FORM GETDATA.
      DATA : FILENAME TYPE STRING.
      FILENAME = TXT_FILE.
      CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
          FILENAME                      = FILENAME
         FILETYPE                       =  'ASC'
         HAS_FIELD_SEPARATOR           = 'X'
        HEADER_LENGTH                 = 0
        READ_BY_LINE                  = 'X'
        DAT_MODE                      = ' '
        CODEPAGE                      = ' '
        IGNORE_CERR                   = ABAP_TRUE
        REPLACEMENT                   = '#'
        CHECK_BOM                     = ' '
      IMPORTING
        FILELENGTH                    =
        HEADER                        =
        TABLES
          DATA_TAB                      = IT_UPLOAD
      EXCEPTIONS
        FILE_OPEN_ERROR               = 1
        FILE_READ_ERROR               = 2
        NO_BATCH                      = 3
        GUI_REFUSE_FILETRANSFER       = 4
        INVALID_TYPE                  = 5
        NO_AUTHORITY                  = 6
        UNKNOWN_ERROR                 = 7
        BAD_DATA_FORMAT               = 8
        HEADER_NOT_ALLOWED            = 9
        SEPARATOR_NOT_ALLOWED         = 10
        HEADER_TOO_LONG               = 11
        UNKNOWN_DP_ERROR              = 12
        ACCESS_DENIED                 = 13
        DP_OUT_OF_MEMORY              = 14
        DISK_FULL                     = 15
        DP_TIMEOUT                    = 16
        OTHERS                        = 17
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.
    FORM GETFILE.
      CALL FUNCTION 'WS_FILENAME_GET'
       EXPORTING
        DEF_FILENAME           = ' '
         DEF_PATH               = '.'
        MASK                   = ' '
        MODE                   = ' '
        TITLE                  = ' '
       IMPORTING
         FILENAME               = TXT_FILE
        RC                     =
      EXCEPTIONS
        INV_WINSYS             = 1
        NO_BATCH               = 2
        SELECTION_CANCEL       = 3
        SELECTION_ERROR        = 4
        OTHERS                 = 5
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.
    <b>This is a part of my BDC program its working for me u try n reply if it works for u.</b>
    regards
    vijay

  • Dynamic File name in File Adapter

    Hi,
    I have a requirement to pass dynamic file name in File Adapter.
    Is there any way to pass a variable for the file name attribut in file adapter.
    I am looking for some options apart from %yyMMddHHmmss%,%SEQ%...etc
    Please suggest if any of you have information on how to put values from a variable to file name attribute in file adapter
    regards
    Saiju

    Hi Saiju,
    Yes there is.
    Assign your file name to a variable, let's say 'fileName'.
    Now go to your invoke activity(for the specific fileadapter) -> Property tab-> find a property call jca.file.FileName -> in the value field assign 'fileName' variable.
    That's it... (assuming you are using 11g)
    Arik
    Edited by: Arik on Jun 27, 2012 3:12 PM

  • Same file name in File Receiver Adapter

    Hi All,
    I have IDOC to file scenario. In one of the IDOC segment File Name is coming . I will do the mapping of IDOC to File.
    I want that file name that is coming in IDOC segment to be as name of my file that I put at File system.
    Pls suggest

    Also please check:
    Advanced Tab Page
    Variable Substitution (Target Directory/File Name Scheme)
    http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm
    And very helpful blogs:
    /people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12
    /people/sameer.shadab/blog/2005/09/23/an-interesting-usage-of-variable-substitution-in-xi
    /people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i
    BR,
    Dzmirty

Maybe you are looking for