Get formatted adress via function module

Hi there,
I am looking for a function module that gives me a formatted version of a given adress number. Like it is in form printing I need that for a normal ABAP-reporting.
Is there any function module that helps me doing that? ADDR_GET I doesn't mean.
Kind regards
JetGum

Hi,
Kindly check the FM ADDRESS_INTO_PRINTFORM.
Regards,
Ankur Parab

Similar Messages

Error during XML inbound via Function Module 'EDI_DATA_INCOMING'

Hi Team,
I am facing below error while trying to upload a inbound XML file via Function Module 'EDI_DATA_INCOMING'.
The control record must begin with <EDI_DC40 segment="1"> instead of
Message no. EA719
Diagnosis
The tag '<EDI_DC40 segment="1">' must be at the start of a control record in XML format, otherwise string '' would be found.
System Response
The file cannot be processed.
Procedure
Correct file DEV_H\SGIDOCI\MSUTEST\00082_ATT..
Please suggest a proper solution for the same. If it is because of wrong structure of XML file then please send me correct XML format for file upload.
Regards,
Amit Sharma

Hello,
It's the error is SAP code.
Look notes 1616333 and 1535033. Those should fix the error.
BR, Janne

Datasource via function module

Hi,
I am building a function that is due to be used by a Datasource (via Function Module).
This function uses table WDRD. It applies to this table a code that needs the use of an internal table for the calculation (for intermediary calculation storage). After which, I want to get the result of this internal table (say T1_DATA), and return it to E_T_DATA, which will be used to fill my datasource. This is where I am stuck.
-> When I try to get the content of my internal table in my cursor (code: OPEN CURSOR WITH HOLD S_CURSOR FOR
select * from T1_DATA
endif.),
I get an error message stating the table is not defined in the ABAP dictionary.
-> When I try to avoid the cursor and put directly the content of my table T1_DATA in table E_T_DATA, I don't get anything in my Datasource.
Any help would be greatly appreciated.
Thanks,
Pierre

Hi,
Which structure are you using??
Are you using the same old structure for this function module as well.
Have you enhanced the structure with new required fields.
New extrac fields needs to be added to existing structure if you are using the same or create a new one and make sure that you have all the fields in the structure which you are going to use in the data source.
You need to take care for the append as well and the issue could be in the code as well.
Make sure you have written the proper code and just for the new fields done an append
Thanks
Ajeet

Error in Extraction with Generic Datasource via Function Module

Dear Gurus,
Iam working for BI-HR module.We are extracting data with generic data source via function module. The client some more extra fields in already existing DS. So we made a copy of that Function module and tried to create new generic DS, we got error while extraction like "Error occured during the extraction process". Can you please help in resolving this issue, your valuable suggestion would be highly appreciated.
Thanks and regards
Arun S

Hi,
Which structure are you using??
Are you using the same old structure for this function module as well.
Have you enhanced the structure with new required fields.
New extrac fields needs to be added to existing structure if you are using the same or create a new one and make sure that you have all the fields in the structure which you are going to use in the data source.
You need to take care for the append as well and the issue could be in the code as well.
Make sure you have written the proper code and just for the new fields done an append
Thanks
Ajeet

WBS copy via function module "K_PLAN_TO_PLAN_COPY"

Hi Experts
anybody please advise whether WBS copy to other via function module "K_PLAN_TO_PLAN_COPY"
is possible or not in below situation.
Currently we faced some issue when WBS satus is "TECO", we can not
copy WBS to another WBS (we want to copy whole wbs into others) by
function module "K_PLAN_TO_PLAN_COPY".
So we just change system status from TECO to REL then copy wbs to other,
however, we could face another issue with this way of copying. (since we
have to change wbs status, it could cause conflict against other project)
We want to copy wbs without changing wbs status via function module "K_PLAN_TO_PLAN_COPY".
Can it be possible? if yes, please advise how to, (settings/conditions/something like that)
Thank you.
Satoru

Hi Satoru,
The Function Module K_PLAN_TO_PLAN_COPY is not released for customers and therefore it is not intended to be used in customer specific programs or enhancements. For further details, please have a look SAP Note 109533.
Sorry for not having better news.
BR,
Enrique

Adding a new conditon on head via function modul?

Hi,
is there a way to add a condition to an order via function module? I mean in customizing we have maintained the calc scheme (and everything else) and assign it to the order. What we want is to add the new condition type to the head of the order via function module. The scenario is as follows:
We create an order and have on the header a field for a value. If you type a value in the field and press enter the condition should be created and calculatetd. The result is given in the condition tab of the order on header level.
We try to not do a modifictaion. therefore i am looking for a function module. Is there someone who could help?
thanks and regards,
Ming

Why can't this be done by the pricing configuration?
There are also pricing user exits available, which are not modifications and exist for this purpose exactly (i.e. when for some reason configuration alone is not enough). See the list here:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/erplo/sdUserexits

Generic Delta Extraction via Function Module

Hello,
i need a help for a generic delta extraction based on a Function Module. As an example i take the function module RSVD_BW_GET_DELTA_DATA.
My generic delta extractor based on the field AEDAT - Change Date and i will extract purchase service orders and entry sheets.
In the sample function module the select for the extraction worked with the table ROBWQTSTAT, but this table ist empty after the initialization.
OPEN CURSOR WITH HOLD G_CURSOR FOR
      SELECT * FROM ROVERCUBE1
               WHERE COUNTRY IN L_R_COUNTRY AND
                     REGION IN L_R_REGION AND
                     KUNNR   IN L_R_KUNNR AND
                     TYPE    IN L_R_TYPE AND
                     GJAHR   IN L_R_GJAHR AND
Here the timerange calculated in form GET_TIME_INTERVAL is evaluated.
                     TSTMP   IN S_R_TSTMP AND
                     OBJVERS = 'A'.
I found the table ROOSGENDLM. In this table i found the field DELTAID with the last date of the extraction and the field REPEATID with the date for the repead-Update.
My Questions:
Is this the right way to build an generic delta extraction with an function module or must i install a coding in my function module for an update of the table ROBWQTSTAT?
Which settings are needed in the table ROOSOURCE for a generic delta extraction via function module?
Best regards
Uwe

Hi Uwe,
please have a look at https://weblogs.sdn.sap.com/pub/wlg/2415. [original link is broken] [original link is broken] [original link is broken] It might help
kind regards
Siggi
PS: We already had almost the same question here today.

Call WDA from ABAP via function module

Hi WDA experts,
is there any possibility to call a WDA within a ABAP report AND include it in the process.
The best would be to call a WDA via a function module - make some inputs on the WDA side - press submit and the function module gives me the data from the webdynpro back to my application.
I know that I can call a WDA via the function CALL_BROWSER, but in this case the WDA application is fully independent from the report and I am not able to post any data back to the report.
I also know FM WDY_EXECUTE_IN_PLACE, but in this case I need a HTML container to display the WDA and there it seems that I also never get back any data back to the report.
Any hints are appreciated.

Not too hard:
CALL WDA passing in a KEY on start plug.
write the data to a shared memory object using the key passed as the
key to a shared memort object on the submit.
(see blogs on writing Shared maemory objects in ABAP)
Then simply exit APP.
On return read the data from the Shared memory Object.
The shared memory object lives across the 2 sessions.
cheers
Phil.

Equipment record address creation via function module

How can I populate an Equipment record's address via a function module? I'm referrring to the Address area of the Location tab in tcode IE02. BAPI_EQUI_CREATE works fine for the base data but has no address capabilities.

Alejiandro
Yes it was ITOB410. I tried the lock_old parm without luck but was able to get around that problem with an explicit calll to FM EQUIPMENT_LOCK. However, I have a new problem with the FM.
The LOCK FM got rid of the BLOCKED issue. However, now an internal call from EQUIPMENT_MODIFY to EQUI_GET_SAVE_DATA is causing a short dump in include LITOBBUFEQF70 on:
120           IF NOT SY-SUBRC IS INITIAL.
121 *         try to read lock table by matnr/sernr
122             READ TABLE I_WA-LOCK ASSIGNING <L_WA_LOCK_REC>
123                  WITH TABLE KEY EQUNR = SPACE
124                                 MATNR = <L_WA_EQUI_REC_WBUF>-EQUI
125                                 SERNR = <L_WA_EQUI_REC_WBUF>-EQUI
126             IF NOT SY-SUBRC IS INITIAL.
>>>>               MESSAGE X003.
128             ENDIF.
129           ENDIF.
Have you seen this?

Getting values from a function module called in a WDA method

Friends,
I am trying to execute a function module from WDA.
I have created a service call for the function module. The function module takes values from the user, looks up the corresponding values of another field and returns the values in an internal table.
I am using the "Method Call in Used Controller" of WD Code wizard to call the function module.
When the event handler method containing the call to the function module is executed, nothing happens.
I am not sure how to pass values to the function module and to get the return values from the function module.
I am new to using function modules from WDA. Please help me out.
Thanks and Regards.

Rashmi,
Is the function module intended to collect input data from the UI and process it? - Yes
If yes, then the input (importing parameter) to the Function Module is a table of values (which should be ideally from the context mapped to the Table UI Element). - The importing parameter is a single value NOT a table and is mapped to the view context.
Now this table UI Element is bound to the view controller context , which in turn is mapped to the component controller context. And you are indeed being able to read the value of this internal table in the component controller method where the function module is being called by means of get_static_attributes_table (Is this right? - Yes, I am able to read the table of values that is passed from the component controller view to form view context by using get_static_attributes_table.
Or are you being able to read it in the event handler method of the view controller and not being able to read it in the component controller method) -
The function module takes a single value as import parameter and returns a table of values as return value.
It works fine when no importing parameter is being used and returns the table of values that is getting passed from component controller context to form view context when i am able to read it using get_static_attributes_table.
Now the question is: how to pass the import parameter value to the function module. I assumed since the importing parameter is a context node (like the return values are), i should set the value ( captured when the user enters the value in the form) to the importing parameter context attribute using set_attribute method. Since it is mapped to the component controller context, i assumed it will get passed and the method will take it as input parameter.
Let me know if my assumptions are correct regarding passing the import parameters and what is missing here.
Thanks and Regards.

Packing a Delivery via function modules or BAPI's

Does anyone know the correct function modules to call in order to pack an outbound delivery. The HU is already been entered into the delivery. I just need to pack all the items into this HU and PGI the delivery. I've tried the following function modules:
SD_DELIVERY_UPDATE_PACKING
V51P_FIND_HEADER
V51P_NEUE_HU_PRO
I'm not sure what I'm doing wrong but the delivery doesn't get packed. Anyone have a clue?
Thank you,

The problem resides in external unique number assignement for handling units:
in SPRO:
> Logistics - General
> Handling Unit Management
> External Identification
> Set Unique Number Assignment for HU Identification
Simply flag the checkbox and Save!
Without this flag BAPI's raise this info message (HUDIALOG 038). Even if it is an info message and the number is returned at the end the handling unit won't be created!
Just flag it!

Get interface of RFC function modules in a remote system

Hi,
my goal is to write a report which checks if DDIC structures in two systems fit together when I use RFC`s.
I have the destination and the name of the RFC.
Can somebody tell me if I can get a list of the Importing/Exporting Parameters of this RFC? Maybe even with a typedescribtion?
Thanks for you help.
Best regards
Lars
Edited by: Lars-Eric Biewald on May 21, 2008 8:39 AM

Hello ,
Thank you for your quick help.
Here I have 3 ECC 6 system .
1 Central systen
2 Slave system
Data will be updated to 2 slave system using RFC function module .
We've already the SAP address, Client, User name , Password.. of the remote system
So here how we will create RFC in SM59 to be used in the RFC call ?
We will transfer the username, password , client in the RFC function module/..
Here I do not know how to create RFC connection in SM59 and how to use them in ABAP
Could you please help me ????
Thanks

Error while creating Generic Extractor via Function Module

Hello Guys
I have created a Generic Extractor through a Function Module. I took the Standard FM: RSAX_BIW_GET_DATA_SIMPLE, gave it a new name and activated it. I made a few changes in it, like giving my structure name for E_T_DATA and giving the list of tables, from where I need to get the data. Then I created the datasource in RSO2 by giving this function module and the extract structure.
The DS was created properly, but when I check in RSA3 for records, its giving me an error: ---> <b>The extraction program does not support object YCNA_INVY_TRNS</b>
What do i do now? Can someone please tell me, what changes I need to make in the standard FM to suit my requirements??
Thanks.

Hi,
Just try to reactivate the structure once again. And when you open the function module, if the problem still persists just try to press Return key several times. The message you are getting is just a warning message.
PS: I am not sure whether this is the correct way, but i personally resolved this by pressing the ENTER key 4 or 5 times. So just give a try.
Regards
Sunil

In WE19 getting error Message as Function module missing

Hi Friends,
I need to debug the Inbound function module
so in WE19 i am providing the IDOC number and clicking on the Inbound function module then i am getting pop-up
i am able to select my function module name
and checking the Fore ground processing Radio button
for debugging
I am getting a Warring Message as
Interface or Function module <NAME> is Incorrect
Kindly suggest me
where the mistake might be
and how to correct IT
Thanks in Advance
Ganesh

Hi Ganesh,
I believe you are using a non IDOC function module, that's the reason you are getting that error.
Use the appropriate IDOC function module and then select the Debug check box and it will stop.
If you can provide me the IDOC message then I can help you by giving the correct Function Module.
Thanks,
Mahesh.

Problem with Creation of CRM Order via Function Module Test

I am trying to check the order creation process from external systems by using the test function in Tcode SE37 with Function Module BAPI_BUSPROCESSND_CREATEMULTI.
I have created a Test Sequence of the following FMs:
BAPI_BUSPROCESSND_PROCSETTINGS
BAPI_BUSPROCESSND_CREATEMULTI
BAPI_PROCESS_SAVE
BAPI_TRANSACTION_COMMIT
All that I have been able to create so far is an order header without a Sold-to or Ship-to and no items. I am able to populate the Organization data, Header text and Appointments. The only partner function that is being populated is the one that is being automatically picked up from my user master.
For the BAPI_BUSPROCESSND_CREATEMULTI I am populating the following tables:
HEADER          1 entry
ITEM               2 entries
PARTNER          2 entries
ORGANISATION     1 entry
APPOINTMENT          2 entries
INPUT_FIELDS          41 entries
SCHEDULELINE     2 entries
I have created the entries based upon information gained through debugging function module CRM_ORDER_MAINTAIN during the creation of a service order.
It would be interesting to know if anybody has successfully created an order via the SE37 test function and if so, it would be useful to see the data in the relevant tables.

HEllo ,
Write a wrapper to the function module CRM_ORDER_MAINTAIN.
To populate the Text use below code
ls_input_field_names-fieldname = 'REF_GUID'.
INSERT ls_input_field_names INTO TABLE lt_input_field_names.
ls_input_field_names-fieldname = 'REF_KIND'.
INSERT ls_input_field_names INTO TABLE lt_input_field_names.
ls_input_field_names-fieldname = 'TDID'.
INSERT ls_input_field_names INTO TABLE lt_input_field_names.
ls_input_field_names-fieldname = 'TDSPRAS'.
INSERT ls_input_field_names INTO TABLE lt_input_field_names.
ls_input_field_names-fieldname = 'TDSTYLE'.
INSERT ls_input_field_names INTO TABLE lt_input_field_names.
ls_input_field_names-fieldname = 'TDFORM'.
INSERT ls_input_field_names INTO TABLE lt_input_field_names.
ls_input_field_names-fieldname = 'LINES'.
INSERT ls_input_field_names INTO TABLE lt_input_field_names.
ls_input_field_names-fieldname = 'MODE'.
INSERT ls_input_field_names INTO TABLE lt_input_field_names.
CLEAR ls_input_fields.
ls_input_fields-ref_guid    = attr_guid.
ls_input_fields-ref_kind    = 'A'.
ls_input_fields-objectname = 'TEXTS'.
CONCATENATE 'CRM_ORDERH' order_guid INTO ls_input_fields-logical_key.
ls_input_fields-field_names = lt_input_field_names.
INSERT ls_input_fields INTO TABLE attr_t_inputfields.
Call Order maintain FM to create any order
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
    EXPORTING
      it_text               = lp_order->attr_t_text
      it_partner          = lp_order->attr_t_partner
    IMPORTING
      et_exception     = et_exception
    CHANGING
      ct_orderadm_h     = lp_order->attr_t_orderadm_h
      ct_input_fields      = lp_order->attr_t_inputfields
    EXCEPTIONS
      error_occurred    = 1
      document_locked   = 2
      no_change_allowed = 3
      no_authority      = 4
      OTHERS            = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards
Satish

Get formatted adress via function module

Similar Messages

Maybe you are looking for