Get 'Generic Error' when attempting to import .mov files with transparency?

I get the 'Generic Error' when attempting to import .mov files with transparency? I'm trying to use mattes with an alpha channel but I cannot import them. I have had this same issue since cs6, now I have it with cc 2014? Any clues would be most appreciated.
I have uninstalled the DVCPro Codec, but it didn't help.
I have tried converting the .mov file (which is now automatic in Yosemite) and this creates a ProRes4444 Codec, Again no luck with import.
I've seen this issue on the web, but never a solution? Anyone?

Hi Terence,
I tried iPhoto Library Manager but it could not solve my problem. Opening the iPhoto library I can see that the reference to the pictures are pointing to my old location not to the new one. I considered running a script that would change all pointers since this is basically what is needed (in my case from /Volumes/RAID1/Fotos/XXX to /Volumes/Fotos/XXX). Instead I inserted a soft unix link to make to connection but that did not work. It is referring to the airport disk by the airport name rather than the mounted disk name. Very strange indeed. The problem is maybe not in iPhoto but in OSX? Anyway, maybe the only way out is to take some hours and manually run through all linked photos... cumbersome and annoying!
Regards,
Søren

Similar Messages

  • I get an error when trying to import MP3 files in iTunes?

    When I try to import mp3 files into iTunes (version 6), I get an error message of:
    The file "song file name" can not be imported An unknown error has occurred (-50).
    I have already imported these files into iTnes on my old computer, but run into this problem with my new laptop. I downloaded a new version of iTunes just like I installed all my new programs on this new laptop.
    For some reason, I run into this problem when trying to import any mp3 files (as mentioned, even mp3 files that I successfully imported into iTunes previously).
    (I've tried a complete removal and re-install, but that didn't help)
    Anyone know why I'm getting this error message and how to correct things?
    Thanks in advance for any help !!!

    C:\DOCUME~1\Mark\LOCALS~1\Temp\WERe357.dir00\iTunes.exe.mdmp
    C:\DOCUME~1\Mark\LOCALS~1\Temp\WERe357.dir00\appcompat.txt
    those are the files that are sent as an error report... i dont know what the problem is! this is starting to get me mad! I need my music! some1 help plz.
    I cant load that one folder, what could be the problem? I've loaded another folder similar to this one but it was alot smaller and everything worked out fine, but for my big one its messing up.

  • Error when attempting to import object C1

    Hi,
    We are doing an ECC 6.0 Upgrade from 4.6C version.
    While executing Payroll Simulation, we are getting short dump error stating “Error when attempting to import structure C1”.
    This error occurs in the Payroll driver RPCALCX0.
    Requests for your inputs.
    Regards,
    Ravi.

    'The data type is "N" in the dataset, but "C" in the program.'
    Rob

  • Error when attempting to IMPORT object TLINE

    Hi Experts,
    I am trying to read a standard text in my webdynpro abap application using FM READ_TEXT but I keep getting this error Error when attempting to IMPORT object "TLINE". It was working fine before we recently migrated to a unicode enviornment.
    This is where its crashing
    FORM read_textlines
    if rt_header-tdtexttype is initial.              "SAPscript format
      import tline to rt_lines   
    from database stxl(tx)
    Thanks in advance.

    Found my answer. I had a data type conflict when  using FM read_text.

  • CAT2 problem: Error when attempting to IMPORT object "C1

    Hello Friends,
    We are upgraded from SAP 4.6C to ECC6.0
    I am getting problem for CAT2 Transaction. CAT2 is working fine for most of the personnel numbers but for few persons, it is giving an ABAP dump.
    Runtime Errors         CONNE_IMPORT_WRONG_COMP_TYPE
    Except.                CX_SY_IMPORT_MISMATCH_ERROR
    Short text:     Error when attempting to IMPORT object "C1".
    We are not able to distinguish what is the cause for CAT2 giving dump for few employees.  We are getting this dump in the initial screen when we enter the timesheet profile and personnel number.
    I have also done the comparision betn the employess for which CAT2 is working and for which it is giving dump. but dont got any clue.
    Request you to suggest me
    Madhu

    Hi,
    This is a really old thread. Please open a thread for your specific issue.
    -Paul
    Moderator

  • Error when attempting to IMPORT object "TS_CHECK".

    When using in BI SAP NetWeaver 2004s (700 - SP 15) the transaction ST04old -> Detail analysis menu -> Summary report
    The following short dump occurs:
    Runtime Errors         CONNE_IMPORT_WRONG_COMP_TYPE
    Except.                CX_SY_IMPORT_MISMATCH_ERROR
    Date and Time          19.11.2008 15:14:08
    Short text
    Error when attempting to IMPORT object "TS_CHECK".
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSTD4" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
    not caught in
    procedure "DB02_ORA_FILL_TS_CHECK__CRITOB" "(FUNCTION)", nor was it propagated
    by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    When importing the object "TS_CHECK", the component no. 4 in the
    dataset has a different type from the corresponding component
    of the target object in the program "SAPLSTD4".
    The data type is "I" in the dataset, but "N" in the program.
    Missing RAISING Clause in Interface
    Program                                 SAPLSTD4
    Include                                 LSTD4U03
    Row                                     1
    Module type                             (FUNCTION)
    Module Name                             DB02_ORA_FILL_TS_CHECK__CRITOB
    Trigger Location of Exception
    Program                                 SAPLSTD4
    Include                                 LSTD4U03
    Row                                     51
    Module type                             (FUNCTION)
    Module Name                             DB02_ORA_FILL_TS_CHECK__CRITOB
    Source Code Extract
    Line
    SourceCde
    21
    DATA: BEGIN OF TD110.
    22
    INCLUDE STRUCTURE TD110_STRU.
    23
    DATA: END OF TD110.
    24
    25
    CURR_TIME = SY-UZEIT.
    26
    CURR_DATE = SY-DATUM.
    27
    28
    CALL FUNCTION 'GET_DB_ORA_RELEASE'
    29
    IMPORTING
    30
    ORACLE_RELEASE = ORA_REL.
    31
    32
    IF FLAG_REFRESH = 'y'.  FLAG_REFRESH = 'Y'. ENDIF.
    33
    flag_refresh = 'Y': Es soll in jedem Fall auf die DB zugegriffen werd.
    34
    35
    CLEAR TS_CHECK. REFRESH TS_CHECK.
    36
    CLEAR CRITOBJ. REFRESH CRITOBJ.
    37
    CLEAR NR_CRIT_OBJ.
    38
    39
    IF FLAG_REFRESH <> 'Y'.
    40
    41
    Suche zunächst im Arbeitsspeicher !
    42
    CLEAR TS_CHECK_CACHE. READ TABLE TS_CHECK_CACHE.
    43
    IF NOT ( TS_CHECK_CACHE IS INITIAL ) .
    44
    TS_CHECK[] = TS_CHECK_CACHE[].
    45
    CRITOBJ[] = CRITOBJ_CACHE[].
    46
    OK_1 = 'Y'.
    47
    48
    Suche danach in 'MONI' !
    49
    ELSE.
    50
    PERFORM PREPARE_MONIKEY USING 2.
    >>>>>
    IMPORT TS_CHECK CRITOBJ FROM DATABASE MONI(DB) ID MONIKEY.
    52
    53
    IF SY-SUBRC = 0.
    54
    OK_1 = 'Y'.
    55
    TS_CHECK_CACHE[] = TS_CHECK[].
    56
    CRITOBJ_CACHE[] = CRITOBJ[].
    57
    ENDIF.
    58
    ENDIF.
    59
    60
    'Same procedure' für datetime:
    61
    IF NOT ( TD110_CACHE IS INITIAL ).
    62
    DATETIME-MONI_DATE = TD110_CACHE-DATUM.
    63
    DATETIME-MONI_TIME = TD110_CACHE-UZEIT.
    64
    ELSE.
    65
    PERFORM PREPARE_MONIKEY USING 3.
    66
    IMPORT TD110 FROM DATABASE MONI(DB) ID MONIKEY.
    67
    IF SY-SUBRC = 0.
    68
    DATETIME-MONI_DATE = TD110-DATUM.
    69
    DATETIME-MONI_TIME = TD110-UZEIT.
    70
    TD110_CACHE = TD110.
    Only related SDN post is following, but solved by changing permissions for saposcol.
    Only related SAP Note is SAP Note Number 597743 "DB02: Poor entries for critical objects list", but not applicable for current SAP version.
    For me strange is that this issue occurs on the development system, but not on the acceptance and production system.
    Thanks in advance for any assistance.
    KR
    Gidion

    Received the solution from SAP Active Global Support:
    This error occurs due a corruption in the table MONI.
    For solving this issue you need to clean the records of this table via the following path :
    1. Call transaction ST03
    2. With GOTO -> Performance database -> Content of database
    3. Push button Delete data group
    4. Enter ID DB
    5. Continue
    6. Confirm the delete
    If you wish to backup the data before deleting the entry please follow the steps in the note 1000275 "DB02: history data backup procedure".
    Regards,
    Gidion

  • I get an error when attempting to start genius. It says "Unsuccessful Action: The action you attempted to perform did not complete successfully. Please try again later." Help!

    I get an error when attempting to start genius. It says "Unsuccessful Action: The action you attempted to perform did not complete successfully. Please try again later." Help!

    From an existing Discussion:
    Go to Safari --> Preferences
    Click Security
    Show Cookies
    Type "apple.com" in to top search field
    Select All
    Click Remove
    Click Done
    Repeat the above to confirm they are gone (mine took two attempts)
    Choose Update Genius again in iTunes.
    iTunes 9 - can't update genius https://discussions.apple.com/thread/2151150

  • I get an error when I try to move instances of public folders.

    We have exchange 2003 and exchange 2010 setup in a coexistence environment. I get an error when I try to move instances of public folders from Exchange 2003 to Exchange 2010. "Unable to create the required MAPI profile. Please verify that you have
    sufficient permissions to write to the MAPISVC.INF file. ID no: c103073a Exchange system Manager." I have checked the permissions on the exchange 2003 server. I am unable to locate the MAPISVC.inf file on the exchange 2010 server. This is the last set
    before we begin our move to exchange 2010 and then on to exchange 2013. Any help would be appreciated.

    Hi,
    Do you mean you get the error like the following one?
    An error occurred while trying to establish a connection to the Exchange Server. Be sure that port 443 (for ssl) or port 80 (for non-ssl) can be reached. If you are connecting to the public folders, be sure that the public store is mounted. If you are connecting
    to the mailboxes and the progress bar shows particular mailbox. Be sure that the user has at least one email address.
    Exception failed to connect using secure URL https://gsfcdp16es/esadmin/admin/nyu.email.gs.com/publicfolders with error. 
    The underlying connection was closed. Unable to connect to the remove server.
    Please check if you can expand PF tree in ESM.
    Please make sure SSL is disabled on /ExAdmin and  /Public virtual directory. If possible, you can recreate the ExAdmin virtual directory to check result.
    Best regards,
    Belinda Ma
    TechNet Community Support

  • HT204380 I keep getting an error when attempting to log in to FaceTime on my Mac. "The server encoutered an error processing registration. Please try again later."

    I keep getting an error when attempting to log in to FaceTime on my Mac. "The server encoutered an error processing registration. Please try again later."

    Hey radyslav,
    There's an article that applies to your situation, I'd follow the steps within here:
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Take care,
    Delgadoh

  • Error when attempting to IMPORT object "HIST2"

    hi everyone could you please solve this problem for me, i have a short dumb saying in the short text - Error when attempting to IMPORT object "HIST2", can anyone pls slove this for me . Thanks in advance.

    hi ark,
             what the error analysis says is :-
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
    not caught in
    procedure "AKT_DAY_HIST2" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    When importing the object "HIST2", the component no. 8 in the
    dataset has a different type from the corresponding component
    of the target object in the program "RSORAT4M".
    The data type is "I" in the dataset, but "P" in the program.

  • SUBRC= 2 Error when attempting to IMPORT object MC12VC0ITM_

    Hi,
    I've added an addtional field to 2lis_12_vcitm datasource and transported to QA system. Now, i need to make delta init w/o data. when i try this i got the following message,
    SUBRC= 2 Error when attempting to IMPORT object MC12VC0ITM_
    no succsessful delta init takes place..
    please help
    regrards
    S

    Hi,
    You need to delete the set up tables and delta qeueue in the target system for the data source which you are changing... before doing the transports.
    Also clear LUW in SMQ1in t-code.
    If the transports were succesful in the QA system.
    Did you followed the correct procedure??
    Do the change and dop the transports again.
    Here is the OSS note which tells what needs to be done before doing the data source transports.
    Take a look.
    762951,328181
    Thanks
    Ajeet

  • Getting "generic error" when linking clips.  Generic not a helpful word.

    Getting "generic error" when linking clips.  Generic not a helpful word.

    Zero information also does not allow anyone here try to help
    More information needed for someone to help... please click below and provide the requested information
    -PPro Information FAQ http://forums.adobe.com/message/4200840

  • I keep getting this error when I publish the SWF file.

    I keep getting this error when I publish my SWF file.
    Fonts should be embedded for any text that may be edited at runtime, other than text with the "Use Device Fonts" setting. Use the Text > Font Embedding command to embed fonts.
    ReferenceError: Error #1065: Variable TLFTextField is not defined.
    And these compiled errors
    Symbol 'Symbol 6', Layer 'Layer 1', Frame 1
    Warning: The instance name 'staff' is declared on an object of type fl.text.TLFTextField but there is a conflicting use of the instance name 'staff' on an object of type flash.display.InteractiveObject.
    Scene 1, Layer 'action', Frame 1, Line 7
    1061: Call to a possibly undefined method gotoAndPlay through a reference with static type fl.motion:AnimatorFactory.
    Scene 1, Layer 'action', Frame 1, Line 3
    1061: Call to a possibly undefined method addEventListener through a reference with static type fl.motion:AnimatorFactory.
    This is the only action script 3.0 script that I wrote.
    import flash.events.MouseEvent;
        skipbtn.addEventListener(MouseEvent.CLICK, btnClick);
    function btnClick (event:MouseEvent):void{
        skipbtn.gotoAndPlay("home");

    the first line is a warning, not an error.
    and you have more actionscript than you think.  open the movie explorer panel and toggle the actionscript only button to find all the actionsript in your fla.

  • ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    Error 1402 | Error 1406 | Acrobat, Reader

  • I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro.... The operation can't be completed because an unexpected error occurred (error code -50)

    I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro....
    The operation can’t be completed because an unexpected error occurred (error code -50)

    I would get an external drive today and copy all your stuff off the TC.. forget trying to load more onto it. There is a good chance after 3years (A 2TB should be only about 2years tops), the disk or the TC itself is on the way out. Do it immediately. If TM is also failing to backup you need to recognise symtoms of impending doom.
    Unfortunately the error messages are archane and it is hard to discover their meaning.
    You also cannot verify a network drive.. you can verify the TM sparsebundle though so do that.
    A5. http://pondini.org/TM/Troubleshooting.html
    Reboot the whole network from off.. certainly if you run later OS it can simply lose the drive..
    If you still fail to be able to copy to the TC.. then get that external and copy off it. Tell us if you can do that.

Maybe you are looking for