Get Info Dialog, what does the 'Grouping entry' do?

Just trying to make sense out of how iTunes (version 11.0.5) organizes my library and files. I can't find anything that explains what the 'grouping' field is for. It is found in the 'Get Info/Info' dialog box.

-> http://sonicchicken.net/blog/wordpress/20060122/itunes-grouping/

Similar Messages

I was playing with my ipad settings (it's an older model) and noted in the advanced settings of Safari there was a place to view website databases. When I clicked on this I saw websites. How do these get there and what does the space amount mean?

I was playing with my ipad settings and noted in he advanced settings of Safari there was a place to view "website databases". When I selected this I saw a multitude of websites.
Can anyone tell me how these get there? Can a website be posted even if it was never went to? What does the space amount mean? For example, 1.5 kb...is this quite a bit? Would it indicate someone has gone to a site multiple times?
I share my ipad with my teenage daughter and I'm trying to find out if she's lying to me. Obviously she's swearing that she has "no idea" how these got there and I'm trying to keep her safe (she's only 14).
Thanks everyone.
Concerned Mom

Think of your PC and the 'temporary internet folder' where it keeps cached copies of web pages or elements off a web page for 'quicker display the next time you visit'. That's pretty much what that folder is. 1.5K is tiny. Probably just a basic page with some text on it. (you might be confusing 1.5K with 1.5 megabyte....megabyte is large...it's roughly 1000 kilobytes, so the 1.5K is a tiny file)
As far as I know, the only way info gets into that folder is if the browser has been to that site.
if you have a concern there are browsers out there, McGruff is one i've seen recommended, that allow some degree of parental control and supervision. That or you could passcode lock the iPad or enable the restrictions to turn off some parts of the device to have some control.

What does the open file dialog do 'under the hood' and is there a way to simulate it

What does the open file dialog do 'under the hood' and is there a way to simulate it?
I have a bug in my code (that I've posted about before, here) which I can't fix at the moment, but I do have a workaround.
Briefly, the bug:
I call a dll from a function node, to initialise and run a spectrometer. If I start up the PC, LabVIEW and run my vi the code runs without complaint, the first call to the dll to initialise the spectrometer doesn;t return an error but the spectrometer is not detected either.
I've tried various solutions, see the link above, and none work
The workaround:
If, at any time before running the code containing the function node I open an 'open file' dialog window, select the dll and click ok/hit enter then everything is fine. When I run the main code the spectrometer is detected.
I use an express vi to open the file dialog, I specify the start path and file name as constant inputs and just click ok/hit return when the dialog pops up. I don't do anything with the dialog outputs. In fact the vi that contains the open file dialog can be run before the project containing the bug is even open.
I have to do this everytime I turn the PC on.
So, either
1) Can somewone suggest a fix for the original bug?
2) What is the easiest way to simulate the enter keypress when the open file dialog pops up
or
3) Can someone tell me what the open file dialog does under the hood that somehow causes the dll to work and can it be simulated in straight LabVIEW
I suspect that the dll itself is dodgy ( I have in the past talked to the supplier but not got very far, and I will try again but I would like a quick, temporary solution too). I'm guessing that the file dialog is making some kind of check on the file, and possibly registering its presence with the OS (winXP). I tried using the file/folder exists vi to see if checking the file like that worked but no luck.
Any help greatly appreciated.
Dave

Hi David
I am very conscious about thread hijacking but this sounded like my issue so I hope you dont mind me asking about your issue. I am hoping that you have a spectrometer from the same vendor as me and its not just me seeing an Error 1097 issue. My spectrometer is from a company called Stellarnet.
So far I have unable to get it to work with other VIs. There is one condition where I can get it to work but its no good for me.
Case 1
I open the VI in a fresh labview environment with no other VIs in memory. The code runs with no issue.
Case 2
Labview is not opened. I double click the spectrometer VI in windows explorer. The VI opens but it fails to run resulting in Error 1097. Personally, I dont see the difference between this and Case 1 above and yet it fails.
Case 3
If I already have other VI's in memory and try to load the spectrometer VI and run it fails with Error 1097. This case is the one that most important to me. I have a test executive that will load test VIs dynamically and I can't get this to work. Same problem Error 1097.
I wanted to share what I have seen with you and to let you know that maybe somebody else has the same issue. I am convinced its the DLL but the vendor dis-agreed saying it was LabVIEW. I couldn't convince him otherwise.
Thanks in advance
David

Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on get info . What am I suppose to change in the setting on getinf

Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on <get info>. What am I suppose to change in the setting on <get info>

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if it frightens you, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

What does the PopUp "Prevent this page from creating additional dialogs" really mean and if I check the Box, how do I undo this if this was the Wrong Thing To Do?

What does the PopUp "Prevent this page from creating additional dialogs" really mean and if I check the Box, how do I undo this if this was the Wrong Thing To Do?
Details
Constantly, while using Firefox (Beta v 11.0), and/or ESPECIALLY, when I have my eMail @ Mail.com open, I get this PopUp stating: "For security reasons, restarting mail.com Mail is possible only via the mail.com Mail Service. Please close this window and restart mail.com Mail" BUT Then there is a CHECKBOX: "Prevent this page from creating additional dialogs."
I have no idea if Checking this Box is a Good Idea or if it will Screw-Up my mail.com Mail Service...
Anyone have an answer or explanation of the Use of this Little Check-Box?
BJ Orden [email protected]

You do not get any pop-up windows on that website if you tick that box.
That setting is stored in the cache and you should see pop-ups again if you reload the page and bypass the cache.
Reload web page(s) and bypass the cache.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Cmd + Shift + R" (MAC)

When I see the usage on my iPod touch 4 they have categories for how much space is being used where. What does the "other" category contain? Like what could I delete on my iPod to get rid of the "other" category?

when I see the usage on my iPod touch 4 they have categories for how much space is being used where. What does the "other" category contain? Like what could I delete on my iPod to get rid of the "other" category?

What is the Other on my iPhone and How to Remove It
An "other" larger than about 1 1/2 GB usually indicates that the "other" includes corrupted files.
First try:
"First you go settings/general/usage/music/then left swipe over music and press delete and you would think it deletes your music but it doesn't instead it deletes your other but make sure your ipod is connected to a computer while doing this"
as recommended by:
How do I get rid of "other" storage: Apple Support Communities
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software

HT1491 Why do i keep getting the message 'Cannot connect to iTunes Store' when I have done every connection I can find? What does the error message (-1202) mean when I am on the iTunes site on my computer?

Why do i keep getting the message 'Cannot connect to iTunes Store' when I have done every connection I can find? What does the error message (-1202) mean when I am on the iTunes site on my computer?

Hi Velvalee,
While there may not be specific information about that error, here is an article of steps for troubleshooting connectivity issues with the iTunes store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
If that article does not help, there is a link near the bottom for an additional article of advanced troubleshooting.
Cheers!
- Ari

On opening some pdfs in new tab, get a box labeled Adobe Acrobat with a ? in it. Right click on the link gets the pdf. What does the box and ? mean. Running W7, FF 10.0.2, Adobe Standard 9. Thanks

On opening some pdfs in new tab, get a box labeled Adobe Acrobat with a ? in it. Go back to the original link, right click on the link gets the pdf. What does the box and ? mean and why do I get it when trying to open some pdfs? Running W7, FF 10.0.2, Adobe Standard 9. Thanks.

Assuming that you are using IE10 / IE11 on Windows: http://support.microsoft.com/kb/2716529

CSCC - what does the "id" mean and how to get it

https://apps.cisco.com/CustAdv/ServiceSales/contract/productDetailsIndex.do?method=loadProductDetails&contractId=55565082772&serviceLineNumber=55565082912&lineID=55565086982&instanceID=1483016052&contractNumber=93913779&id=382878711&majorOrMinor=MAJOR&coveredOrUncovered=COVERED&lineSeqNo=45823525&contextID=0.4317186686218467
Currently I am developing a web client tool to get contract information based on the SN. And I don't find any existing API of CSCC, I had to parse the html instead. But I encountered an issue here as $subject which highlighted in the above link. What does the id number mean and how can I get it ?

Are you running Firefox in Windows 95 or 98 compatibility mode?
Mozilla/5.0 ('''Windows NT 4.0'''; rv:35.0) Gecko/20100101 Firefox/35.0
Firefox won't install on Windows NT 4.0 - so something is changing your useragent and saying that your operating system is like 20 years old.
Right-click your Firefox desk-top shortcut and select Properties. Then open the Compatibility tab and look at '''Compatibility mode''' - un-check that box if it has a check-mark.

I have a 3GS. The iPod on the phone has made duplicates of some songs. I've tried using the "get info" dialog box to set all the information the same but the dups are still there. Even after erasing all music with iTunes they are still there.

I have a 3GS. The iPod on the phone has made duplicates of some songs. I’ve tried using the “get info” dialog box to set all the information the same but the dups are still there. Even after erasing all music with iTunes, iTunes is empty but they are still on the phone.

Some Users have reported that a Restore as New has Resolved Issues after the Upgrade...
Backup and Set Up as New Device
http://support.apple.com/kb/HT4137

What are the following entries doing in the following configuration file?

What are the following entries doing in the following configuration file?
Thank you
<include>coherence-pof-config.xml</include>
<allow-interfaces>true</allow-interfaces>
<allow-subclasses>true</allow-subclasses>
<?xml version="1.0"?>
<!DOCTYPE pof-config SYSTEM "pof-config.dtd">
<pof-config>
<user-type-list>

<include>coherence-pof-config.xml</include>

<allow-interfaces>true</allow-interfaces>
<allow-subclasses>true</allow-subclasses>
</pof-config>

<allow-interfaces> - The allow-interfaces element indicates whether the user-type class-name can specify Java interface types in addition to Java class types. Valid values are "true" or "false". Default value is false.
<allow-subclasses> - The allow-subclasses element indicates whether the user-type class-name can specify a Java class type that is abstract, and whether sub-classes of any specified user-type class-name will be permitted at runtime and automatically mapped to the specified super-class for purposes of obtaining a serializer. Valid values are "true" or "false". Default value is false.
<user-type-list> - The user-type-list element contains zero or more user-type elements. Each POF user type that will be used must be listed in the user-type-list. The user-type-list element may also contain zero or more include elements. Each include element is used to add user-type elements defined in another pof-config file.
<include> The include element specifies the location of a pof-config file to load user-type elements from. The value is a locator string (either a valid path or URL) that identifies the location of the target pof-config file.
http://wiki.tangosol.com/display/COH35UG/user-type-list
http://wiki.tangosol.com/display/COH35UG/pof-config
Thanks,
Everett Williams
Coherence Team

What does the "Internal" value on the ASM Disk Group Usage Chart represent?

In OEM Grid Control, on the Automatic Storage Management Home page there is the Disk Group Usage Chart.
What does the "Internal (GB)" value on this pie chart represent? and how it has been calculated?
On one of our servers it is 13% of available ASM disk capacity.. and on another it is 0%.

Internal space is (Total MB - Free MB) from the @ DiskSpaceUsage - Total MB from the DatabaseDiskSpace usage
It is basically the space occupied by the your DB in the ASM disk space. There are few bugs related to this and need to be refined
regards
Pravin

To get rig of doing the same entry in batch split.

Hi Evryone,
We are trying to configure MTO Scenario but without PP. Following are the steps we have configured and are executed without errors:
u2022 We have created a sales order with batch managed material, with special stock indicator E assigned to item category (TAN) in the sales order
I receive the same fabric(material) with different batches from the production.T-code=mb1c,Mov type=521E.
The fabric(batch managed material) and its quantity is packed in handling unit with Hu02.
Now the handling units are in the stock.
At the time of delivery i has to enter the each batch name of the same material and its quantity again in batch split option to select the handling unit in Edit>Pack.
I want to know that is there any way to get rig of doing the same entry in batch split option,which i already did during packing Hu02.
Best regards
vijay

Correct, if you open SE16, display table RFCDES you see a list of defined RFC destinations.
The field RFCOPTIONS gives a list of the attributes. You will see something like:
H=....,S=..,M=...,U=xxxxx
These contain the attributes of the RFC destinations
H: Host
S: Instance ID
M: Client
U: the user ID used in the RFC destination. So here you would find the required User ID.

What does the message "Another program has control of HP imaging device mean"? I get this when I am trying to scan.

What does the message "another program ha control of HP imaging mean when I am trying to scan something. How do i correct it?

You may need to ask HP. I had the same issue with a networked (via ethernet) home HP multi-function. Sometimes the only way to get it to scan was to completely disconnect it from the network and connect it to only one Mac with a USB cable. Even that did not alwatys work.
Eventually, Apple started pushing out HP printer updates via Software Update. One of those finally made that error message to go away.
So run Software Update and see it there are new drivers that Apple made avaialble.

Need help with "get info" dialog box

Hi Everyone!
I need some help with trying to figure out what some of the options are in the "Get Info" dialog box. I've searched the iTunes help and these forums, but can't find anything.
So, in the options tab,
1. What does "Part of compilation" Y/N, do for me?
2. Same for "Remember Position"
3. And finally, "Gapless album"
Thanks, Vince.

1. when you import a compilation album (like an 80's compilation or something), itunes will import it as
song 1, artist 1, 80's greatest hits
song 2, artist 2, 80's greatest hits etc
Click part of a compliation means that, it means that it would keep them altogether rather than having lots of songs everywhere
2. If you start playing a song, then stop, part way through, when you next come to the song, itunes will remember where you left off
3. Albums like jean michel jarre, classical, mike oldfield, etc, have many songs which merge into each other. Having gapless album ticked will ensure that, when playing the album, there are no gaps between songs

Get Info Dialog, what does the 'Grouping entry' do?

Similar Messages

Maybe you are looking for