Get Info panel metadata all gone after upgrade to Yosemite!

Shortly after upgrading to Yosemite I discovered that all the metadata I had typed into the Get Info panel for a multitude of image files has been wiped out! Need less to say I'm ****** off. What happened and is there any way to recover this info? On a related note I also discovered that the field where you type info now behaves like a tag entry field, where typing a comma creates separate snippets of text. Whose brilliant idea was that? Is there a preference that can be reset so the field will accept text normally? Thanks.

I have the same problem, and no I haven't moved it.. but it's back to the default WIKI after the upgrade..
It seems there's the data in there.. a good 7-8 gig's worth, so I'm not thinking that's the default/empty data.
There IS a
Config
Config.original
Actually.. I'm not sure about the exact wording cos I can't access the computer as Yosemite is hanging right now.. **** Yosemite, I'm never going there again...

Similar Messages

My iPhoto pictures are all gone after upgrade to Photos

Can anyone please help!!! All my pictures from iPhoto are all gone after upgraded to Photos tonight. Anyone know how I can recover them?

Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library.
BUT you should always have a back up before doing this kind of work. Always.
Greeting from Co. Clare

Windows 7 Partition Gone After upgrade to Yosemite

So as many people are experiencing after I upgraded to Yosemite I lost my windows Partition. Holding Cntl on boot shows no windows option to boot from. When going to disk utility on the mac side, the windows partition is still there but showing a weird name disk0s4. It is grayed out and I cannot touch it.
At this point I just want to salvage my data from that partition. Please tell me that is possible. I Created a new thread because I am really a complete noob with Macs and a lot of whats in the other threads is foreign language to me. So I need help step by step what to do and where to go.
I am hoping I can salvage all my important data, then just reformat the old windows partition.
Much appreciated for the help and input.

I tried TeskDisk and from the very beginning it mentioned about being unable to modify my hard disk as below.
=========
Write access for this media is not available.
TestDisk won't be able to modify it.
- No partition from this disk must be mounted:
Open the Disk Utility (In Finder -> Application -> Utility folder)
and press Unmount button for each volume from this disk
- This media may be physically write-protected, check the jumpers.
==========
I tried the Disk Utility but of course I couldn't unmount the Macintosh HD partition while running on it.
Anyway, I still ran TestDisk to see if all partitions would be detected correctly. It seemed good, as captured below.
All the partitions were found. Then I chose MS Data partition, keyed P and Enter to check its filesystem.
The error message was same as described in the step by step guide you sent me.
The I went back and tried Deeper Search.
It run for hours any the analyse sector was strange at the end, something like more than 600,000,000/488,397,167. Sorry I forgot to capture this figure. However, I think Deeper Search is unnecessary if TestDisk can find all partitions.The problem is write access.
Regarding GPT FDisk (gdisk-0.8.10), after installing it I can't find where it is on my computer.
Do you have any recommendation please.

ARD doesn't show all computers after upgrading to Yosemite

Yesterday I upgraded my Air to Yosemite and after that I have issues with Apple Remote Desktop 3.7.2, the issue is that I can't see all the other Mac clients we have in the office, I have reinstalled ARD to see if that solved the issue but no.
I also upgraded one of our iMacs to Yosemite which also have ARD installed (3.7.2) and it is the same issue on that one, we can see some of the clients but not all.
But the thing is that the clients I missing in my Airs ARD I can see in the iMacs ARD and vice versa, but I can't find that iMac in my ARD and it can't find my Air.
We are connected to the same netowrk and the same accesspoint.
Everything worked fine when we runned Mavericks.

Hallo,
I have exactly the same problem. After installing (update) Yosemite on my (2013) iMac, the system doesn't properly shutdown anymore.
I have been waiting for hours, but nothing happens ... there is a black screen and a rotating thing ... and the only option to physically shut it down is to hold the power button
best regards,
Jens

Unable to print from iPhoto after upgrading to Yosemite?

Whenever I want to print from iPhoto, the application on the IMac becomes unresponsive and will not print. This all started after upgrading to Yosemite. My printer is updated, so now I have no idea how to make this work again. Any help would be great.

DA2014 wrote:
Rebuilt iPhoto, it is updated, but still is unresponsive. I get the spinning wheel that never goes away until I force close the app. The printer works on other applications.
OK and I see the issue is only with iPhoto. The only thing I can think of is resetting the printing system and then re-installing the printer(s). DO NOT use any of the printer's software for installing, simply follow the directions for adding a printer in Mac Basics: Printing in OS X - Apple Support.
To reset the printing system, open System Preferences - Printers & Scanners - locate the device in the window on the left and right click the offending printer and select Reset Printing System....
After you have reset the printing system and re-added the device then shutdown (not restart) the computer for about 30 seconds and restart and then test.

Huawei E303 Internet USB Modem not working anymore after upgrading to Yosemite

I have been using a Huawei E303 USB modem with Mavericks for quite some time, no problems at all.
After upgrading to Yosemite, the device is not even detected.
Can anybody help?
Thanks in advance

I just found a solution:
Simply download the zip file from
http://www74.zippyshare.com/v/54915703/file.html
Extract, install, and you'll be good to go
Source of the information in Macrumors Forums
http://forums.macrumors.com/showthread.php?p=20268220&posted=1#post20268220

All bought titles and albums gone after upgrading I Tunes

Hi Guys,
unfortunately all my recently bought titles and albums from the I Tunes store are gone after upgrading to 10.7.0.21
Can somebody please help me?
Thanks you very much...
Best regards - Greg

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

How can get my Iphotos as screen saver ...all disappeared after upgrading ...I have done as suggested in deleting the files from the Finder ..now just left with the "squirly default " screensaver option

How can I get my Iphotos to show as my screen saver please ? all disappeared after upgrading ...I have done as suggested and deleted all relevant files , but now am only left with the "Squirly " screen saver option in the drop down menu and no option for Iphoto library.

Slow, intermittent. Sometimes bootable sometime not. Odd behavior.
Sounds to me like a classic case of your HD failing.
Your SMART status may still show verified, with no errors on the Apple Hardware Test, Disk Utility shows no problems on Disk Repair- this is of no help.
I trust you have a good back-up and a bootable clone.
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/

How to install custom XMP Get Info Panels in Adobe Bridge CC

Adobe changed their way they store the custom XMP Get Info Panels in Adobe Bridge CC. Check out this blog to see how you can install the XMP Get Info Panels that you used in Adobe Bridge CS6 in Adobe Bridge CC:
http://www.databasepublish.com/blog/installing-custom-metadata-panels-and-get-info-panels- adobe-bridge-cc

Check your Bridge preferences. It seems that you have the "Don't process images larger than…" option set to a lower amount than some of your files.
So, don't blame it on Bridge, but on the user who neglects that setting.

Get Info Panel Information

Hi All,
How can we get info panel characters count using indesign javascript. We can get characters count using below code:
app.selection[0].characters.length
But if the document is xml document then it includes each xml tag as one character. I want to ignore these types of characters. Info panel ignores these types of characters in character count. So I want to get info panel characters count.
Thanks & Regrads,
Senthilvel

@Senthilvel – you could do a GREP find action on the selection with a simple dot and count the found characters.
app.findGrepPreferences.findWhat = ".";
var myResultArray = app.selection[0].findGrep();
var myLength = myResultArray.length;
alert("Number of characters in text selection:"+"\r"+myLength);
Any other implications?
I'd say, test this one first.
Uwe

How do I get print n share to work after upgrade to iOS 5. I can print from this app thru wifi. But it can,t print mail, web pages, etc..

How do I get print n share to work after upgrade to iOS 5. I can print from the app thru wifi and PC. However am unable to print mail, web pages, etc..
In mail when I try to print it just says can,t find air printers. It used to say print with print n share.

I sent e-mail to developer regarding this and they said that basically Apple has denied them access to the Airprint dialog in the new source code for iOS 5. So, the only way to print to pdf is to capture the e-mail or webpage in the internal apps within Print n Share. INHO, this really *****. Apple should make printing to pdf files just a standard feature of all their apps. If they don't do this, they are going to lose alot of business to the Adroid world as pdf file format is the business standard for all documents.

After Upgrade to Yosemite, all apps are slow.

I upgraded to Yosemite and all applications are slow. ( as e.g.. starting to type in this box give me beachball for 2 seconds initially) A big difference in speed from Mavericks to Yosemite. Opening system preferences takes 3 seconds to load, and clicking on Users & Groups takes 25 seconds to open.
I do not have fire vault enabled. I did a safe boot and some apps did appear to open faster. Also did a repair disk and rebooted. No change. When Safari is open it takes 5 seconds to open a new window.   I ran EtreCheck and the report is as follows;
Thanks for any help;( After pasting the EtreCheck text file, I clicked on this box to add the Thanks... , it took 2-3 seconds for the beach ball to stop spinning.)
Problem description:
After upgrading to Yosemite, all apps are slow,
EtreCheck version: 2.0.6 (91)
Report generated October 20, 2014 at 11:46:01 AM MDT
Hardware Information: ℹ️
iMac (24-inch, Early 2009) (Verified)
iMac - model: iMac9,1
1 2.66 GHz Intel Core 2 Duo CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1920 x 1200
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 0:23:55
Disk Information: ℹ️
WDC WD6400AAKS-40H2B0 disk0 : (640.14 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 639.28 GB (130.48 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5670S
USB Information: ℹ️
Apple Inc. Built-in iSight
Burr-Brown from TI USB Audio CODEC
Canon MP480 series
Western Digital My Book 1140 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
MyBookMovies (disk2s2) /Volumes/MyBookMovies : 2 TB (549.58 GB free)
LaCie LaCie Hard Drive USB 1 TB
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 210 MB
Time Machine Backups (disk1s2) /Volumes/Time Machine Backups : 795.40 GB (322.99 GB free)
Time Machine Airdisk (disk1s3) /Volumes/Time Machine Airdisk : 100.77 GB (55.52 GB free)
EXCHANGE (disk1s4) /Volumes/EXCHANGE : 100.09 GB (45.35 GB free)
ALCOR Generic USB Hub
Prolific Technology Inc. USB-Serial Controller
Prolific Technology Inc. USB-Serial Controller
Hewlett-Packard hp LaserJet 1012
Apple Computer, Inc. IR Receiver
Prolific Technology Inc. USB-Serial Controller D
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (9.0 24251.1052177) Support
[not loaded] com.parallels.kext.hypervisor (9.0 24251.1052177) Support
[not loaded] com.parallels.kext.netbridge (9.0 24251.1052177) Support
[not loaded] com.parallels.kext.usbconnect (9.0 24251.1052177) Support
[not loaded] com.parallels.kext.vnic (9.0 24251.1052177) Support
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) Support
/Library/Application Support/VirtualBox
[loaded] org.virtualbox.kext.VBoxDrv (4.3.12) Support
[loaded] org.virtualbox.kext.VBoxNetAdp (4.3.12) Support
[loaded] org.virtualbox.kext.VBoxNetFlt (4.3.12) Support
[loaded] org.virtualbox.kext.VBoxUSB (4.3.12) Support
/Library/Extensions
[not loaded] foo.tun (1.0) Support
/System/Library/Extensions
[not loaded] com.hzsystems.driver.CDSDAudioCaptureSupport (1.5) Support
[loaded] com.prolific.driver.PL2303 (1.5.1 - SDK 10.6) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.wdc.driver.1394HP (1.0.9) Support
[not loaded] com.wdc.driver.USBHP (1.0.11) Support
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ℹ️
HP IO: Path: /Library/StartupItems/HP IO
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[loaded] com.paragon.NTFS.notify.plist Support
Launch Agents: ℹ️
[running] com.abbott.mal.launchclient.plist Support
[loaded] org.gpgtools.gpgmail.enable-bundles.plist Support
[loaded] org.gpgtools.gpgmail.patch-uuid-user.plist Support
[loaded] org.gpgtools.Libmacgpg.xpc.plist Support
[loaded] org.gpgtools.macgpg2.fix.plist Support
[running] org.gpgtools.macgpg2.shutdown-gpg-agent.plist Support
[loaded] org.gpgtools.macgpg2.updater.plist Support
Launch Daemons: ℹ️
[running] com.abbott.mal.malserver.plist Support
[loaded] com.adobe.fpsaud.plist Support
[running] com.freemacsoft.appcleanerd.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.wdc.SmartwareDriveService.plist Support
[running] com.wdc.WDSmartWareService.plist Support
[loaded] org.gpgtools.gpgmail.patch-uuid.plist Support
[not loaded] org.virtualbox.startup.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
[invalid?] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[invalid?] com.macpaw.CleanMyMac.volumeWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[failed] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[running] com.vladalexa.MagicPrefs.plist Support
[not loaded] org.virtualbox.vboxwebsrv.plist Support
[running] ws.agile.1PasswordAgent.plist Support
User Login Items: ℹ️
AppCleaner Helper Application (/Applications/AppCleaner.app/Contents/Library/LoginItems/AppCleaner Helper.app)
Messages Application (/Applications/Messages.app)
MagicPrefs UNKNOWN (missing value)
Calendar ApplicationHidden (/Applications/Calendar.app)
Mail ApplicationHidden (/Applications/Mail.app)
Contacts ApplicationHidden (/Applications/Contacts.app)
PowerboxInjector Application (/Applications/PowerboxInjector.app)
Internet Plug-ins: ℹ️
LogitechHarmony: Version: 2.0 - SDK 10.7 Support
DirectorShockwave: Version: 12.0.4r144 - SDK 10.6 Support
Google Earth Web Plug-in: Version: 6.0 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
OfficeLiveBrowserPlugin: Version: 12.2.0 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 Support
AdobePDFViewer: Version: 9.5.5 Support
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 Support
EPPEX Plugin: Version: 4.1.0.0 Support
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Safari Extensions: ℹ️
1Password
AdBlock
ClickToFlash (Disabled)
Print Plus (Disabled)
ClickToPlugin (Disabled)
OpenIE
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
GPGPreferences Support
Growl Support
MacFUSE (Tuxera) Support
MagicPrefs Support
Paragon NTFS for Mac ® OS X Support
Perian Support
QuickTime Player X Preferences Support
WDQuickView Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Destinations:
Time Machine Backups [Local]
Total size: 795.40 GB
Total number of backups: 29
Oldest backup: 2014-10-08 20:15:48 +0000
Last backup: 2014-10-20 17:32:33 +0000
Size of backup disk: Excellent
Backup size 795.40 GB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
      10% WindowServer
      5% syncdefaultsd
      4% Safari
      1% AppleSpell
      0% com.apple.iCloudHelper
Top Processes by Memory: ℹ️
266 MB mds_stores
258 MB Safari
180 MB Finder
137 MB WindowServer
136 MB com.apple.WebKit.WebContent
Virtual Memory Information: ℹ️
3.93 GB Free RAM
2.97 GB Active RAM
443 MB Inactive RAM
978 MB Wired RAM
1.82 GB Page-ins
0 B Page-outs

You could do that, but when setting up your new iMac it is a much better idea to transfer only your existing User Accounts. In other words when Setup Assistant appears, de-select "Applications", "Computer and Network Settings" and "Other files and folders". That way you will eliminate the possibility of reinstalling potentially incompatible software from your existing Mac or its TM backup. It's best to create new printer queues and preferences anyway.
Your venerable HP 1012 will probably work without any difficulty but if you need its driver download it here. If it gives you trouble try OS X's generic PostScript driver.
After configuring your user account, install original versions of your essential software from their original sources. In other words if you installed them via download from the developer's website, download them again. You might need license keys so gather them. Obviously the Mac App Store makes things easy since anything you obtain from there is already linked to your Apple ID and is easily reinstalled by going to your Purchases page.
Don't reinstall things like AppCleaner, CleanMyMac, Western Digital "Smartware" or any of that junk. You don't need it. MacFUSE is outdated. Research Prolific Technology for potential updates for their serial controller. The one you have may work, or not, but you should re-download its driver.
Consider abandoning Microsoft altogether and migrating to better solutions such as Pages, Numbers, and Keynote. They are all free with a purchase of a new Mac and are far more integrated with OS X than anything Microsoft will ever be able to accomplish.
The Burr-Brown USB device is unknown to me, so research TI's website for support if you need it.
If your essential software was distributed on optical media, you can use OS X's "DVD or CD sharing" feature to remotely mount the older iMac's optical drive so that you can install its software. It will work as though that drive were physically installed on your new Mac. Having said that, anything that was distributed on optical media is highly likely to have been outdated a long time ago.
If your essential software is old, orphaned, no longer supported, or is no longer available, meaning you have the only viable copy, the only option is to transfer it from the TM backup or older Mac. In that case be very cognizant of the likelihood for incompatibility, and have a plan for uninstalling it should it cause adverse effects. Creating a new TM backup is the way to do that. A new external HD dedicated to the new Mac is a cheap investment. When you are certain you no longer require the older Mac's TM backup, you can erase it and use it as an additional, redundant TM backup or "clone" repository – whichever you decide is best for your backup needs.

After upgrading to Yosemite, Preview does not let me edit jpg photos (cut out something in background and paste a patch to get rid of the flaw.)

After upgrading to Yosemite, Preview does not let me edit jpg photos (cut out something in background and paste a patch to get rid of the flaw.) Help.

thankyou. THANK you.
thankyouthankyouthankyou!
sorry about no screenie but the first option worked (at least so far!)
THANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOU

After upgrading to Yosemite and Aperture 3.6 all the library icons are shown plain. Does anyone has a hint?

After upgrading to Yosemite and Aperture 3.6 all the library icons are shown plain. Does anyone has a hint?

If it is still slow after removing Symantec, you may need a RAM upgrade. Yosemite can run very poorly on older machines with only 4 GB RAM.

I have 10.6.8 and upgrading os to yesomite, should i reinstall my all softwares after upgrade os?

i have 10.6.8 and upgrading os to yesomite, should i reinstall my all softwares after upgrade os?

Before embarking on a major OS upgrade, it would be wise, advisable and very prudent if you backup your current system to an external connected and Mac formatted Flash drive OR externally connected USB, Thunderbolt or FireWire 800, Mac formatted hard drive. Then, use either OS X Time Machine app to backup your entire system to the external drive OR purchase, install and use a data cloning app, like CarbonCopyCloner or SuperDuper, to make an exact and bootable copy (clone) of your entire Mac's internal hard drive. This step is really needed in case something goes wrong with the install of the new OS or you simply do not like the new OS, you have a very easy way/procedure to return your Mac to its former working state.
Then, determine if your Mac meets ALL minimum system install requirements.
To install Yosemite, you need one of these Macs:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later),
MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
Your Mac also needs:
OS X Mavericks, Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
2 GB or more of memory (I strongly advise, at least, 4 GBs of RAM or more)
8 GB or more of available space
Next,
If you run any older Mac software from the earlier PowerPC Macs, then none of this software will work with the newer OS X versions (10.7 and onward). OS X Snow Leopard had a magical and invisible PowerPC emulation application, called Rosetta, that worked seamlessly in the background that still allowed older PowerPC coded software to still operate in a Intel CPU Mac.
The use of Rosetta ended with OS X Snow Leopard as the Rosetta application was licensed to Apple, from a software company called Transitive, which got bought out, I believe, by IBM and Appe could no longer secure their rights to continue to use Rosetta in later versions of OS X.
So, you would need to check to see if you have software on your Mac that maybe older than, say, 2006 or older.
Also, check for app compatibilty here.
http://roaringapps.com/
If you have any commercial antivirus installed and/or hard drive cleaning apps installed on your Mac, like MacKeeper, CleanMyMac, TuneUpMyMac, MacCleanse, etc. now would be a good time to completely uninstall this apps by doing a Google search to learn how to properly uninstall these types of apps.
These types of apps will only cause your Mac issues later after the install of the new OS X version and you will have to completely uninstall these types of apps later.
Once you have determined all of this, you should be able to find the latest version of Yosemite by clicking on the Mac App Store icon in the OS X Dock and then login to the Mac App Store using your Apple ID and password.
You can then begin the download and installation process of installing OS X 10.10 Yosemite from the Mac App Store.

Get Info panel metadata all gone after upgrade to Yosemite!

Similar Messages

Maybe you are looking for