Get input for 100 dynamic fields in a single screen
Hi all
I got one requirement wherein i need to accept input for around 100 dynamic fields in a single screen. screen can scroll down if possible.
Can anyone tell me whether it is possible. if yes please let me have the sample code.
Thanks
Ravindra Suvarna
Ravi,
Probably a TAB STRIP might help you.
Seggregate your 100 fields logically, say 5 groups.
Have a TAB STRIP CONTROL, with 5 tab strips and place 20 fields in each of the tabs. Each tab strip will have a sub screen.
Regards,
Ravi
Note : Please mark the helpful answers.
Similar Messages
-
Getting input for atleast one variable present in the report
Hi All,
I want to create a report with the below requirement.
If user didn't enter the value for any of the customer exit varaibles(ZCALDAY, ZCALMNTH and ZCALYEAR), then it should not allow user to generate the report. It should give a message or popup and return to the selection screen for getting the value for the input variable. Basically, it should get input for atleast one variable.
Please help me in this issue.
Regards,
Yokesh Kumar.Hi All,
I have written the below code for my requirement.
when 'zcalday' or 'zcalmnth' or 'zcalyear'.
DATA: LOC_VAR_RANGE LIKE RRRANGEEXIT,
count type i.
IF I_STEP = 3.
count = 0.
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'zcalday' or VNAM = 'zcalmnth' or VNAM = 'zcalyear'.
IF LOC_VAR_RANGE-LOW is initial.
count = count + 1.
ENDIF.
ENDLOOP.
if count EQ 3.
CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
EXPORTING
I_CLASS = 'RSBBS'
I_TYPE = 'I'
I_NUMBER = '000'
I_MSGV1 = 'Please give inout for atleast one varialbe''.
RAISE no_replacement.
endif.
ENDIF.
Is there any fault in the below code? Please let me know if there is anything to correct...
Regards,
Yokesh Kumar. -
Dynamic field on the output screen
Hi All,
I have a requirement to create the dynamic field on the output screen.
In the basic list I am displaying the production order details like
check box, production order , materials, quantity, etc.
If I select the particular check box , the quantity pertaining to that check box line as to display on the dynamic field. If I select more than one check box, then the cummilative quantity of all the production orders has to display on the dynamic field.
Thanks in advance.
Ramesh.hi,
you can define a dinamic fields depending on selection of check box.
Go through the below code. I think it may help you.
PARAMETERS:
P_CB1 AS CHECKBOX,
P_CB2 AS CHECKBOX,
P_A TYPE I MODIF ID XXX DEFAULT ' ',
P_B TYPE I MODIF ID YYY DEFAULT ' '.
DATA:
W_C1,
W_C2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'XXX'.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ELSEIF SCREEN-GROUP1 = 'YYY'.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
IF P_CB1 EQ 'X'.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'XXX'.
SCREEN-ACTIVE = 1.
SCREEN-INPUT = 1.
SCREEN-OUTPUT = 1.
SCREEN-INVISIBLE = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF P_CB2 EQ 'X'.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'YYY'.
SCREEN-ACTIVE = 1.
SCREEN-INPUT = 1.
SCREEN-OUTPUT = 1.
SCREEN-INVISIBLE = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF. -
Maintaing a default value for a particular field in the selection screen
Hi all,
How to maintain a default value for a particular field in the Selection Screen of a Standard report
Regards
Ajay>
ajay babu wrote:
> Hi all,
>
> How to maintain a default value for a particular field in the Selection Screen of a Standard report
>
> Regards
> Ajay
Create a variant for your standard program and assign this variant to the field 'Start with variant' while creating transaction code for the standard program in the transaction 'SE93'.
Regards
Rajesh. -
issue is happening on a Mac. I cannot log into creative cloud all I get is for squares in the center of the screen that a blinking
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
Batch Input for user defined fields (SRM 4.0)
Hello.
Now in my project,we are developping Batch Input function about PO,CONF in SRM 4.0.
and in this time, we will use over 20 user defined fields.so we have to enter the value to user defined fields by using Batch Input function.
But if we will enter over the 10 value for user defined fields,we have to scroll the screen.
How do I scroll in SRM?(What's the command to scroll in SRM)
Regards
Ogiwarabetter lock the user since he may some business documnt open and you can not proceed further.
br
muthu -
How to show multiple dynamic tables on a single screen?
right now im displaying alv for singlr attribute of dimension.
eg for dimension PRODUCT attribute PROFITCENTER im displaying in alv when user executes it.
but the requirement is that multiple attributes can be there so multiple tables is to be displayed on a single screen.
User basically wants to see data of all attributes. if there are 10 attributes hee wants to see 10 tables as every attribute has a different table.
what i have achieved is below in snapshots. only one attribute table PRODUCT im able to display. since i believe multiple headers cant be displyed in alv so even if i display multiple dynamically populated tables on a single screen then it will be fine.
i have also ADDED my code below: ZMDREPORT
this report is for SAP BPC.
*& Report ZMDREPORT
REPORT zmdreport.
TABLES /1cpmb/bfrdp3rp.
DATA: gw_datatbl TYPE tabname,
gw_datatbl1 TYPE tabname,
gw_descrptbl TYPE tabname,
gw_attribute TYPE tabname.
DATA:
BEGIN OF gw_attr,
appset_id TYPE uja_dim_attr-appset_id,
dimension TYPE uja_dim_attr-dimension,
tech_name TYPE uja_dim_attr-tech_name,
attribute_name TYPE uja_dim_attr-attribute_name,
caption TYPE uja_dim_attr-caption,
END OF gw_attr,
gt_attr LIKE TABLE OF gw_attr.
DATA: gt_slis_fcat1 TYPE slis_t_fieldcat_alv,
gw_slis_fcat1 LIKE LINE OF gt_slis_fcat1.
DATA : gt_except TYPE TABLE OF zbpcbt007,
gw_except LIKE LINE OF gt_except,
gt_except_t TYPE TABLE OF zbpcbt007,
gt_attrib TYPE TABLE OF tabname,
gw_attrib LIKE LINE OF gt_attrib.
DATA: gr_r_ref TYPE REF TO data.
DATA:BEGIN OF gw_mdr,
appset_id TYPE uj_appset_id,
dimension TYPE uj_dim_name,
reasoncd TYPE zmdreason,
refdimension TYPE uj_dim_name,
attrib TYPE uj_attr_name,
END OF gw_mdr,
gt_mdr1 LIKE TABLE OF gw_mdr,
gt_mdr2 LIKE TABLE OF gw_mdr,
gt_mdtable1 TYPE zbpctt_attr,
gt_mdtable2 TYPE zbpctt_attr,
gw_mdtable2 LIKE LINE OF gt_mdtable2,
gt_mdtable3 TYPE zbpctt_attr,
gt_mdtable4 TYPE zbpctt_attr,
gw_mdtable4 LIKE LINE OF gt_mdtable4,
BEGIN OF gw_finalattr,
dim(32) TYPE c,
END OF gw_finalattr,
gt_finalattr LIKE TABLE OF gw_finalattr,
gt_tab1 LIKE TABLE OF gw_finalattr,
gw_tab1 LIKE LINE OF gt_tab1,
gt_tab2 LIKE TABLE OF gw_finalattr,
gw_tab2 LIKE LINE OF gt_tab2.
FIELD-SYMBOLS: <gfs_tab1> TYPE STANDARD TABLE.
FIELD-SYMBOLS: <gfs_tab2> TYPE STANDARD TABLE,
<gfs_tab3> TYPE STANDARD TABLE,
<gfs_tab4> TYPE STANDARD TABLE.
FIELD-SYMBOLS:<gfs_attr> TYPE any,
<gfs_field3> TYPE any,
<gfs_field4> TYPE any.
DATA: gw_sortcond TYPE string.
FIELD-SYMBOLS: <gfs_t_final> TYPE STANDARD TABLE.
FIELD-SYMBOLS: <gfs_final> TYPE any.
FIELD-SYMBOLS: <gfs_data> TYPE any .
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_env TYPE uja_dimension-appset_id OBLIGATORY.
PARAMETERS: p_dim TYPE uja_dimension-dimension OBLIGATORY.
SELECT-OPTIONS: s_member FOR /1cpmb/bfrdp3rp-mbr_name .
PARAMETERS: p_hir TYPE /1cpmb/bfrdp3rp-/cpmb/hir.
PARAMETERS:p_attr TYPE uj_attr_name MODIF ID m1.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: p_radio1 RADIOBUTTON GROUP g1 USER-COMMAND abc DEFAULT 'X',
p_radio2 RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_reason TYPE zbpcbt007-reasoncd MODIF ID m1.
SELECTION-SCREEN END OF BLOCK b3.
*********************************************************************alv
DATA :gt_fcat TYPE lvc_t_fcat.
DATA: gw_ok_code TYPE sy-ucomm,
gw_okcode TYPE sy-ucomm.
DATA: go_custom_container TYPE REF TO cl_gui_custom_container,
gw_g_container TYPE scrfname VALUE 'CC1',
go_grid1 TYPE REF TO cl_gui_alv_grid.
DATA:BEGIN OF gw_table,
dimension TYPE uja_dimension-dimension,
END OF gw_table,
gt_tab LIKE TABLE OF gw_table ,
BEGIN OF gw_member,
mbr_name TYPE uj_dim_member,
END OF gw_member ,
gt_member LIKE TABLE OF gw_member,
BEGIN OF gw_hir ,
hir TYPE /1cpmb/bfrdp3rp-/cpmb/hir,
END OF gw_hir,
gt_hir LIKE TABLE OF gw_hir.
DATA:gt_slis_fcat2 TYPE slis_t_fieldcat_alv,
gw_slis_fcat2 LIKE LINE OF gt_slis_fcat2 .
DATA: lr_data TYPE REF TO data.
DATA :gt_fcat1 TYPE lvc_t_fcat,
gt_fcat2 TYPE lvc_t_fcat,
gt_fcat3 TYPE lvc_t_fcat,
gt_fcat2_t TYPE lvc_t_fcat,
gw_fcat LIKE LINE OF gt_fcat2,
gw_fcat3 LIKE LINE OF gt_fcat3.
DATA: gt_fcat3_t LIKE gt_fcat3.
DATA: gw_desc TYPE uj_desc.
DATA : gw_string TYPE string,
gw_str TYPE string.
DATA: gw_len TYPE string,
BEGIN OF gw_refdim,
dimension TYPE uja_dimension-dimension,
END OF gw_refdim,
gt_refdim LIKE TABLE OF gw_refdim,
gt_refdim_t LIKE TABLE OF gw_refdim,
BEGIN OF gw_refdata,
data_table TYPE tabname,
desc_table TYPE tabname,
END OF gw_refdata,
gt_refdata LIKE TABLE OF gw_refdata,
BEGIN OF gw_techattr,
tech_name TYPE uja_dim_attr-tech_name,
END OF gw_techattr,
gt_techattr LIKE TABLE OF gw_techattr,
gw_cond TYPE string.
DATA:gw_hircond TYPE string.
DATA: gt_dynpread TYPE TABLE OF dynpread,
gw_dynpread LIKE LINE OF gt_dynpread,
gw_dynpread2 LIKE LINE OF gt_dynpread,
gw_dim TYPE string,
gw_env TYPE string.
FIELD-SYMBOLS: <gfs_w_tab1> TYPE any,
<gfs_w_tab2> TYPE any,
<gfs_w_tab3> TYPE any,
<gfs_field> TYPE any,
<gfs_field2> TYPE any,
<gfs_field_final> TYPE any,
<gfs_s_fcat> TYPE lvc_s_fcat,
<gfs_s_fcat2> TYPE lvc_s_fcat,
<gfs_s_fcat3> TYPE lvc_s_fcat
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_dim.
REFRESH gt_dynpread.
gw_dynpread-fieldname = 'P_ENV'.
APPEND gw_dynpread TO gt_dynpread.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
* TRANSLATE_TO_UPPER = ' '
* REQUEST = ' '
* PERFORM_CONVERSION_EXITS = ' '
* PERFORM_INPUT_CONVERSION = ' '
* DETERMINE_LOOP_INDEX = ' '
* START_SEARCH_IN_CURRENT_SCREEN = 'X'
* start_search_in_main_screen = ' '
* START_SEARCH_IN_STACKED_SCREEN = ' '
* START_SEARCH_ON_SCR_STACKPOS = ' '
* SEARCH_OWN_SUBSCREENS_FIRST = ' '
* SEARCHPATH_OF_SUBSCREEN_AREAS = ' '
TABLES
dynpfields = gt_dynpread
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE gt_dynpread INTO gw_dynpread INDEX 1.
IF sy-subrc EQ 0.
TRY .
REFRESH gt_tab.
SELECT dimension
FROM uja_dimension CLIENT SPECIFIED
INTO TABLE gt_tab
WHERE mandt EQ sy-mandt
AND appset_id EQ gw_dynpread-fieldvalue.
IF sy-subrc EQ 0.
SORT gt_tab BY dimension.
DELETE ADJACENT DUPLICATES FROM gt_tab COMPARING dimension.
IF gt_tab IS NOT INITIAL.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST' "#EC CI_SUBRC
EXPORTING
* DDIC_STRUCTURE = ''
retfield = 'DIMENSION'
* PVALKEY = ' '
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'P_DIM'(004)
* STEPL = 0
* WINDOW_TITLE =
* VALUE = ' '
value_org = 'S'
* MULTIPLE_CHOICE = ' '
* display = ''
* CALLBACK_PROGRAM = ' '
* CALLBACK_FORM = ' '
* CALLBACK_METHOD =
* MARK_TAB =
* IMPORTING
* USER_RESET =
TABLES
value_tab = gt_tab
* FIELD_TAB =
* RETURN_TAB =
* DYNPFLD_MAPPING =
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3
IF sy-subrc NE 0.
ENDIF.
ENDIF.
ENDIF.
CATCH cx_root.
ENDTRY.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_member-low.
REFRESH gt_dynpread.
gw_dynpread-fieldname = 'P_ENV'.
APPEND gw_dynpread TO gt_dynpread.
gw_dynpread-fieldname = 'P_DIM'.
APPEND gw_dynpread TO gt_dynpread.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
* TRANSLATE_TO_UPPER = ' '
* REQUEST = ' '
* PERFORM_CONVERSION_EXITS = ' '
* PERFORM_INPUT_CONVERSION = ' '
* DETERMINE_LOOP_INDEX = ' '
* START_SEARCH_IN_CURRENT_SCREEN = 'X'
* start_search_in_main_screen = ' '
* START_SEARCH_IN_STACKED_SCREEN = ' '
* START_SEARCH_ON_SCR_STACKPOS = ' '
* SEARCH_OWN_SUBSCREENS_FIRST = ' '
* SEARCHPATH_OF_SUBSCREEN_AREAS = ' '
TABLES
dynpfields = gt_dynpread
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
SORT gt_dynpread BY fieldname.
DELETE ADJACENT DUPLICATES FROM gt_dynpread COMPARING fieldname.
IF gt_dynpread IS NOT INITIAL.
LOOP AT gt_dynpread INTO gw_dynpread.
IF gw_dynpread-fieldname EQ 'P_ENV'.
gw_env = gw_dynpread-fieldvalue.
ELSEIF gw_dynpread-fieldname EQ 'P_DIM'.
gw_dim = gw_dynpread-fieldvalue.
ENDIF.
ENDLOOP.
IF sy-subrc EQ 0.
CLEAR: gw_datatbl1, gt_member.
SELECT SINGLE data_table
INTO (gw_datatbl1)
FROM uja_dimension CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ gw_env
AND dimension EQ gw_dim.
IF sy-subrc EQ 0.
TRY .
REFRESH gt_member.
SELECT mbr_name
INTO TABLE gt_member
FROM (gw_datatbl1) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt .
IF sy-subrc EQ 0.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
* DDIC_STRUCTURE = ' '
retfield = 'MBR_NAME'
* PVALKEY = ' '
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'S_MEMBER'
* STEPL = 0
* WINDOW_TITLE =
* VALUE = ' '
value_org = 'S'
* MULTIPLE_CHOICE = ' '
* DISPLAY = ' '
callback_program = sy-repid
callback_form = 'F4CALLBACK'
* CALLBACK_METHOD =
* MARK_TAB =
* IMPORTING
* USER_RESET =
TABLES
value_tab = gt_member
* FIELD_TAB =
* RETURN_TAB =
* DYNPFLD_MAPPING =
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
ENDIF.
CATCH cx_root.
ENDTRY.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_member-high.
REFRESH gt_dynpread.
gw_dynpread-fieldname = 'P_ENV'.
APPEND gw_dynpread TO gt_dynpread.
gw_dynpread-fieldname = 'P_DIM'.
APPEND gw_dynpread TO gt_dynpread.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
* TRANSLATE_TO_UPPER = ' '
* REQUEST = ' '
* PERFORM_CONVERSION_EXITS = ' '
* PERFORM_INPUT_CONVERSION = ' '
* DETERMINE_LOOP_INDEX = ' '
* START_SEARCH_IN_CURRENT_SCREEN = 'X'
* start_search_in_main_screen = ' '
* START_SEARCH_IN_STACKED_SCREEN = ' '
* START_SEARCH_ON_SCR_STACKPOS = ' '
* SEARCH_OWN_SUBSCREENS_FIRST = ' '
* SEARCHPATH_OF_SUBSCREEN_AREAS = ' '
TABLES
dynpfields = gt_dynpread
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
SORT gt_dynpread BY fieldname.
DELETE ADJACENT DUPLICATES FROM gt_dynpread COMPARING fieldname.
IF gt_dynpread IS NOT INITIAL.
LOOP AT gt_dynpread INTO gw_dynpread.
IF gw_dynpread-fieldname EQ 'P_ENV'.
gw_env = gw_dynpread-fieldvalue.
ELSEIF gw_dynpread-fieldname EQ 'P_DIM'.
gw_dim = gw_dynpread-fieldvalue.
ENDIF.
ENDLOOP.
IF sy-subrc EQ 0.
CLEAR: gw_datatbl1.
SELECT SINGLE data_table
INTO (gw_datatbl1)
FROM uja_dimension CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ gw_env
AND dimension EQ gw_dim.
IF sy-subrc EQ 0.
TRY .
REFRESH gt_member.
SELECT mbr_name
INTO TABLE gt_member
FROM (gw_datatbl1) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt.
IF sy-subrc EQ 0.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
* DDIC_STRUCTURE = ' '
retfield = 'MBR_NAME'
* PVALKEY = ' '
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'S_MEMBER'
* STEPL = 0
* WINDOW_TITLE =
* VALUE = ' '
value_org = 'S'
* MULTIPLE_CHOICE = ' '
* DISPLAY = ' '
callback_program = sy-repid
callback_form = 'F4CALLBACK'
* CALLBACK_METHOD =
* MARK_TAB =
* IMPORTING
* USER_RESET =
TABLES
value_tab = gt_member
* FIELD_TAB =
* RETURN_TAB =
* DYNPFLD_MAPPING =
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
ENDIF.
CATCH cx_root.
ENDTRY.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
*& Form F4CALLBACK
* text
* -->RECORD_TAB text
* -->SHLP text
* -->CALLCONTROL text
FORM f4callback TABLES record_tab STRUCTURE seahlpres
CHANGING shlp TYPE shlp_descr
callcontrol TYPE ddshf4ctrl.
callcontrol-no_maxdisp = ''.
ENDFORM. "F4CALLBACK
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_hir.
REFRESH gt_dynpread.
CLEAR gw_dynpread.
gw_dynpread-fieldname = 'P_ENV'.
APPEND gw_dynpread TO gt_dynpread.
gw_dynpread-fieldname = 'P_DIM'.
APPEND gw_dynpread TO gt_dynpread.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
* TRANSLATE_TO_UPPER = ' '
* REQUEST = ' '
* PERFORM_CONVERSION_EXITS = ' '
* PERFORM_INPUT_CONVERSION = ' '
* DETERMINE_LOOP_INDEX = ' '
* START_SEARCH_IN_CURRENT_SCREEN = 'X'
* start_search_in_main_screen = ' '
* START_SEARCH_IN_STACKED_SCREEN = ' '
* START_SEARCH_ON_SCR_STACKPOS = ' '
* SEARCH_OWN_SUBSCREENS_FIRST = ' '
* SEARCHPATH_OF_SUBSCREEN_AREAS = ' '
TABLES
dynpfields = gt_dynpread
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
SORT gt_dynpread BY fieldname.
DELETE ADJACENT DUPLICATES FROM gt_dynpread COMPARING fieldname.
LOOP AT gt_dynpread INTO gw_dynpread.
IF gw_dynpread-fieldname EQ 'P_ENV'.
gw_env = gw_dynpread-fieldvalue.
ELSEIF gw_dynpread-fieldname EQ 'P_DIM'.
gw_dim = gw_dynpread-fieldvalue.
ENDIF.
ENDLOOP.
IF sy-subrc EQ 0.
CLEAR: gw_datatbl1.
SELECT SINGLE data_table
INTO (gw_datatbl1)
FROM uja_dimension CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ gw_env
AND dimension EQ gw_dim.
IF sy-subrc EQ 0.
REFRESH gt_member.
TRY .
SELECT /cpmb/hir
INTO TABLE gt_hir
FROM (gw_datatbl1) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt.
IF sy-subrc EQ 0.
SORT gt_hir BY hir.
DELETE ADJACENT DUPLICATES FROM gt_hir COMPARING hir.
IF gt_hir IS NOT INITIAL.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
* DDIC_STRUCTURE = ' '
retfield = '/CPMB/HIR'
* PVALKEY = ' '
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'P_HIR'
* STEPL = 0
* WINDOW_TITLE =
* VALUE = ' '
value_org = 'S'
* MULTIPLE_CHOICE = ' '
* DISPLAY = ' '
* CALLBACK_PROGRAM = ' '
* CALLBACK_FORM = ' '
* CALLBACK_METHOD =
* MARK_TAB =
* IMPORTING
* USER_RESET =
TABLES
value_tab = gt_hir
* FIELD_TAB =
* RETURN_TAB =
* DYNPFLD_MAPPING =
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
ENDIF.
ENDIF.
CATCH cx_root.
ENDTRY.
ENDIF.
ENDIF.
ENDIF.
* CLASS lcl_main DEFINITION
CLASS lcl_main DEFINITION.
PUBLIC SECTION.
CLASS-METHODS:
create_alv1,
create_alv2,
create_alv3,
create_fieldcatalog,
create_dynamicalv,
merge_tables,
show_alv1
ENDCLASS. "lcl_main DEFINITION
* CLASS lcl_main IMPLEMENTATION
CLASS lcl_main IMPLEMENTATION.
METHOD create_fieldcatalog.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE' "#EC CI_SUBRC
EXPORTING
i_structure_name = gw_datatbl
CHANGING
ct_fieldcat = gt_fcat1
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE' "#EC CI_SUBRC
EXPORTING
i_structure_name = gw_descrptbl
CHANGING
ct_fieldcat = gt_fcat2
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
ENDMETHOD. "create_fieldcatalog
METHOD create_dynamicalv.
* DATA: lr_data TYPE REF TO data.
CLEAR lr_data.
CALL METHOD cl_alv_table_create=>create_dynamic_table
"#EC CI_SUBRC
EXPORTING
* i_style_table =
it_fieldcatalog = gt_fcat2
* i_length_in_byte =
IMPORTING
ep_table = lr_data
* e_style_fname =
EXCEPTIONS
generate_subpool_dir_full = 1
OTHERS = 2.
IF sy-subrc <> 0.
*MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMETHOD. "create_dynamicalv
METHOD merge_tables.
SORT gt_fcat2 BY col_pos.
ASSIGN lr_data->* TO <gfs_t_final>.
LOOP AT <gfs_tab1> ASSIGNING <gfs_w_tab1>.
APPEND INITIAL LINE TO <gfs_t_final> ASSIGNING <gfs_final>.
LOOP AT gt_fcat2 ASSIGNING <gfs_s_fcat>. "#EC CI_NESTED
ASSIGN COMPONENT <gfs_s_fcat>-fieldname OF STRUCTURE
<gfs_w_tab1> TO <gfs_field>.
IF sy-subrc EQ 0 AND <gfs_field> IS ASSIGNED.
ASSIGN COMPONENT <gfs_s_fcat>-fieldname OF STRUCTURE
<gfs_final> TO <gfs_field_final>.
IF sy-subrc EQ 0 AND <gfs_field_final> IS ASSIGNED.
<gfs_field_final> = <gfs_field>.
ENDIF.
*** Creating dynamic where clause for the key fields
IF <gfs_s_fcat>-key = 'X'.
READ TABLE gt_fcat2_t ASSIGNING <gfs_s_fcat2>
WITH KEY
key = abap_true
fieldname = <gfs_s_fcat>-fieldname.
IF sy-subrc EQ 0.
IF gw_string IS INITIAL.
*Putting value into quotes
CONCATENATE `'` <gfs_field> `'` INTO gw_str.
*Concatenating first field into string
CONCATENATE <gfs_s_fcat>-fieldname '=' gw_str
INTO gw_string SEPARATED BY space.
CLEAR gw_str.
ELSE.
*Concatenating rest all key fields
CONCATENATE `'` <gfs_field> `'` INTO gw_str.
CONCATENATE gw_string 'AND' <gfs_s_fcat>-fieldname
'=' gw_str INTO gw_string SEPARATED BY space.
CLEAR gw_str.
ENDIF.
ENDIF.
*** End of Creation
ENDIF.
ENDIF.
ENDLOOP.
IF NOT gw_string IS INITIAL.
*Concatenating sy-langu (-> always present)
CONCATENATE gw_string 'AND LANGU = SY-LANGU'
INTO gw_string SEPARATED BY space.
ENDIF.
*** Filling Description field based on dynamically created where clause
LOOP AT <gfs_tab2> ASSIGNING <gfs_w_tab2> WHERE (gw_string).
"#EC CI_NESTED
ASSIGN COMPONENT 'TXTLG' OF STRUCTURE <gfs_w_tab2>
TO <gfs_field>.
IF sy-subrc EQ 0 AND <gfs_field> IS ASSIGNED.
ASSIGN COMPONENT 'TXTLG' OF STRUCTURE <gfs_final>
TO <gfs_field_final>.
IF sy-subrc EQ 0 AND <gfs_field_final> IS ASSIGNED.
<gfs_field_final> = <gfs_field>.
ENDIF.
ENDIF.
ENDLOOP.
CLEAR gw_string.
ENDLOOP.
ENDMETHOD. "merge_tables
METHOD create_alv3.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_datatbl).
ASSIGN gr_r_ref->* TO <gfs_tab1>.
SELECT *
INTO TABLE <gfs_tab1>
FROM (gw_datatbl) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND mbr_name IN s_member
AND /cpmb/calc EQ 'N'.
IF sy-subrc EQ 0.
IF p_hir IS NOT INITIAL.
CLEAR gw_hircond.
CONCATENATE '/CPMB/HIR' 'NE' 'P_HIR' INTO gw_hircond
SEPARATED BY space.
DELETE <gfs_tab1> WHERE (gw_hircond).
ENDIF.
CLEAR: gr_r_ref.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_descrptbl).
ASSIGN gr_r_ref->* TO <gfs_tab2>.
SELECT *
FROM (gw_descrptbl) CLIENT SPECIFIED
INTO TABLE <gfs_tab2>
WHERE mandt EQ sy-mandt
AND langu EQ sy-langu.
IF sy-subrc EQ 0.
READ TABLE gt_refdata INTO gw_refdata INDEX 1.
IF sy-subrc EQ 0.
CLEAR gr_r_ref.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_refdata-data_table).
ASSIGN gr_r_ref->* TO <gfs_tab3>.
SELECT *
INTO TABLE <gfs_tab3>
FROM (gw_refdata-data_table) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND /cpmb/calc EQ 'N'.
IF sy-subrc EQ 0.
CLEAR gr_r_ref.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_refdata-desc_table).
ASSIGN gr_r_ref->* TO <gfs_tab4>.
SELECT *
INTO TABLE <gfs_tab4>
FROM (gw_refdata-desc_table) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND langu EQ sy-langu.
lcl_main=>create_fieldcatalog( ).
gt_fcat2_t[] = gt_fcat2[].
DELETE gt_fcat2 WHERE fieldname NE 'TXTLG'.
APPEND LINES OF gt_fcat1 TO gt_fcat2.
gw_len = lines( gt_fcat2 ).
gw_len = gw_len + 1.
gw_fcat-fieldname = 'TXTLG1'.
gw_fcat-reptext = 'Attribute Description'.
gw_fcat-col_pos = gw_len.
gw_fcat-outputlen = 60.
APPEND gw_fcat TO gt_fcat2.
SORT gt_fcat2 BY fieldname.
READ TABLE gt_techattr INTO gw_techattr INDEX 1.
LOOP AT gt_fcat2 INTO gw_fcat.
READ TABLE gt_attr INTO gw_attr
WITH KEY tech_name = gw_fcat-fieldname.
IF sy-subrc EQ 0.
gw_fcat-reptext = gw_attr-caption.
ENDIF.
IF gw_fcat-fieldname = 'TXTLG'.
gw_fcat-outputlen = 60.
ENDIF.
MODIFY gt_fcat2 FROM gw_fcat TRANSPORTING
outputlen reptext .
IF gw_fcat-fieldname NE 'MBR_NAME'
AND gw_fcat-fieldname NE 'TXTLG'
AND gw_fcat-fieldname NE 'TXTLG1'
AND gw_fcat-fieldname NE gw_techattr-tech_name."gw_attrib.
gw_fcat-no_out = 'X'.
MODIFY gt_fcat2 FROM gw_fcat TRANSPORTING no_out.
ENDIF.
ENDLOOP.
lcl_main=>create_dynamicalv( ).
lcl_main=>merge_tables( ).
CLEAR gw_cond.
READ TABLE gt_techattr INTO gw_techattr INDEX 1.
* CONCATENATE 'MBR_NAME =' '<Gfs_field>' INTO Gw_cond
* SEPARATED BY space.
TRANSLATE gw_techattr-tech_name TO UPPER CASE.
CONCATENATE `'` gw_techattr-tech_name `'`
'=' '<Gfs_field>' INTO gw_cond
SEPARATED BY space.
CHECK NOT <gfs_t_final> IS INITIAL.
SORT <gfs_t_final> BY (gw_techattr-tech_name).
LOOP AT <gfs_tab3> ASSIGNING <gfs_w_tab3>.
ASSIGN COMPONENT 'MBR_NAME' OF STRUCTURE <gfs_w_tab3>
TO <gfs_field>.
IF sy-subrc EQ 0 AND <gfs_field> IS ASSIGNED.
DELETE <gfs_t_final> WHERE (gw_cond).
ENDIF.
IF <gfs_t_final> IS INITIAL.
EXIT.
ENDIF.
ENDLOOP.
*adding attribute description
DATA gw_cond1 TYPE string.
DATA gw_cond2 TYPE string.
CLEAR gw_cond1.
CONCATENATE `'` gw_techattr-tech_name `'` 'eq' '<gfs_field>'
INTO gw_cond1 SEPARATED BY space.
CLEAR gw_cond2.
CONCATENATE 'TXTLG1' 'eq' 'SPACE'
INTO gw_cond2 SEPARATED BY space.
CLEAR gw_cond.
CONCATENATE 'TXTLG' 'NE' 'SPACE' INTO gw_cond SEPARATED BY
space.
gw_sortcond = 'TXTLG'.
SORT <gfs_tab4> BY (gw_sortcond).
LOOP AT <gfs_t_final> ASSIGNING <gfs_final> WHERE
(gw_cond2).
ASSIGN COMPONENT gw_techattr-tech_name OF STRUCTURE
<gfs_final> TO <gfs_field>.
IF sy-subrc EQ 0 AND <gfs_field> IS ASSIGNED.
ASSIGN COMPONENT 'TXTLG1' OF STRUCTURE
<gfs_final> TO <gfs_field4>.
IF sy-subrc EQ 0 AND <gfs_field4> IS ASSIGNED.
LOOP AT <gfs_tab4> ASSIGNING <gfs_attr>
WHERE (gw_cond).
ASSIGN COMPONENT 2 OF STRUCTURE <gfs_attr> TO
<gfs_field2>.
IF sy-subrc EQ 0 AND <gfs_field2> IS ASSIGNED.
ASSIGN COMPONENT 5 OF STRUCTURE <gfs_attr>
TO <gfs_field3>.
IF sy-subrc EQ 0 AND <gfs_field3> IS ASSIGNED.
IF <gfs_field> EQ <gfs_field2>.
<gfs_field4> = <gfs_field3>.
MODIFY <gfs_t_final> FROM <gfs_final>
TRANSPORTING ('TXTLG1') WHERE (gw_cond1).
EXIT.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDLOOP.
* LOOP AT <gfs_tab4> ASSIGNING <gfs_attr> WHERE (gw_cond) .
* ASSIGN COMPONENT 2 OF STRUCTURE <gfs_attr> TO
* <gfs_field2>.
* IF sy-subrc EQ 0 AND <gfs_field2> IS ASSIGNED.
* ASSIGN COMPONENT 5 OF STRUCTURE <gfs_attr> TO
* <gfs_field3>.
* IF sy-subrc EQ 0 AND <gfs_field3> IS ASSIGNED.
* LOOP AT <gfs_t_final> ASSIGNING <gfs_final>
* WHERE (gw_cond2).
* ASSIGN COMPONENT gw_techattr-tech_name OF STRUCTURE
* <gfs_final> TO <gfs_field>.
* IF sy-subrc EQ 0 AND <gfs_field> IS ASSIGNED.
* ASSIGN COMPONENT 'TXTLG1' OF STRUCTURE <gfs_final>
* TO <gfs_field4>.
* IF sy-subrc EQ 0 AND <gfs_field4> IS ASSIGNED.
* IF <gfs_field> EQ <gfs_field2>.
* <gfs_field4> = <gfs_field3>.
* MODIFY <gfs_t_final> FROM <gfs_final>
* TRANSPORTING ('TXTLG1') WHERE (gw_cond1).
* EXIT.
* ENDIF.
* ENDIF.
* ENDIF.
* ENDLOOP.
* ENDIF.
* ENDIF.
* ENDLOOP.
IF <gfs_t_final> IS NOT INITIAL.
CALL SCREEN 9000.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDMETHOD. "create_alv3
METHOD create_alv2.
READ TABLE gt_techattr INTO gw_techattr INDEX 1.
CONCATENATE gw_techattr-tech_name 'EQ' 'space' INTO gw_cond
SEPARATED
BY
space.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_datatbl).
ASSIGN gr_r_ref->* TO <gfs_tab1>.
SELECT *
INTO TABLE <gfs_tab1>
FROM (gw_datatbl) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND mbr_name IN s_member
AND /cpmb/calc EQ 'N'
AND (gw_cond).
IF sy-subrc EQ 0.
IF p_hir IS NOT INITIAL.
CLEAR gw_hircond.
CONCATENATE '/CPMB/HIR' 'NE' 'P_HIR' INTO gw_hircond
SEPARATED BY space.
DELETE <gfs_tab1> WHERE (gw_hircond).
ENDIF.
CLEAR: gr_r_ref.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_descrptbl).
ASSIGN gr_r_ref->* TO <gfs_tab2>.
SELECT *
FROM (gw_descrptbl) CLIENT SPECIFIED
INTO TABLE <gfs_tab2>
WHERE mandt EQ sy-mandt
AND langu EQ sy-langu.
IF sy-subrc EQ 0.
lcl_main=>create_fieldcatalog( ).
gt_fcat2_t[] = gt_fcat2[].
DELETE gt_fcat2 WHERE fieldname NE 'TXTLG'.
APPEND LINES OF gt_fcat1 TO gt_fcat2.
SORT gt_fcat2 BY fieldname.
LOOP AT gt_fcat2 INTO gw_fcat.
READ TABLE gt_attr INTO gw_attr WITH KEY
tech_name = gw_fcat-fieldname.
IF sy-subrc EQ 0.
gw_fcat-reptext = gw_attr-caption.
ENDIF.
IF gw_fcat-fieldname = 'TXTLG'.
gw_fcat-outputlen = 60.
ENDIF.
MODIFY gt_fcat2 FROM gw_fcat TRANSPORTING outputlen reptext.
* READ TABLE gt_attrib INTO gw_attrib INDEX 1.
* IF sy-subrc EQ 0.
IF gw_fcat-fieldname NE 'MBR_NAME'
AND gw_fcat-fieldname NE 'TXTLG'
AND gw_fcat-fieldname NE gw_techattr-tech_name."gw_attrib.
gw_fcat-no_out = 'X'.
MODIFY gt_fcat2 FROM gw_fcat TRANSPORTING no_out.
ENDIF.
* ENDIF.
ENDLOOP.
lcl_main=>create_dynamicalv( ).
lcl_main=>merge_tables( ).
CHECK NOT <gfs_t_final> IS INITIAL.
SORT <gfs_t_final> BY ('MBR_NAME').
CALL SCREEN 9000.
ENDIF.
ENDIF.
ENDMETHOD. "create_alv2
METHOD create_alv1.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_datatbl).
ASSIGN gr_r_ref->* TO <gfs_tab1>.
SELECT *
FROM (gw_datatbl) CLIENT SPECIFIED
INTO TABLE <gfs_tab1>
WHERE mandt EQ sy-mandt
AND mbr_name IN s_member.
IF sy-subrc EQ 0.
IF p_hir IS NOT INITIAL.
CLEAR gw_hircond.
CONCATENATE '/CPMB/HIR' 'NE' 'P_HIR'
INTO gw_hircond SEPARATED BY
space.
DELETE <gfs_tab1> WHERE (gw_hircond).
ENDIF.
CLEAR: gr_r_ref.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_descrptbl).
ASSIGN gr_r_ref->* TO <gfs_tab2>.
SELECT *
FROM (gw_descrptbl) CLIENT SPECIFIED
INTO TABLE <gfs_tab2>
WHERE mandt EQ sy-mandt
AND langu EQ sy-langu.
IF sy-subrc EQ 0.
lcl_main=>create_fieldcatalog( ).
SORT gt_fcat2 BY col_pos fieldname.
gt_fcat2_t[] = gt_fcat2[].
DELETE gt_fcat2 WHERE fieldname NE 'TXTLG'.
APPEND LINES OF gt_fcat1 TO gt_fcat2.
SORT gt_fcat2 BY fieldname.
SORT gt_attr BY tech_name.
LOOP AT gt_fcat2 INTO gw_fcat .
IF gw_fcat-reptext IS INITIAL.
READ TABLE gt_attr INTO gw_attr
WITH KEY tech_name = gw_fcat-fieldname BINARY SEARCH.
IF sy-subrc EQ 0.
gw_fcat-reptext = gw_attr-caption.
ELSE.
gw_fcat-reptext = gw_fcat-fieldname.
ENDIF.
ENDIF.
IF gw_fcat-fieldname EQ 'OBJVERS'.
gw_fcat-no_out = 'X'.
ELSEIF gw_fcat-fieldname EQ 'ROWFLAG'.
gw_fcat-no_out = 'X'.
ELSEIF gw_fcat-fieldname EQ 'MBR_NAME'.
gw_fcat-no_out = 'X'.
ELSEIF gw_fcat-fieldname EQ '/CPMB/CALC'.
gw_fcat-no_out = 'X'.
ELSEIF gw_fcat-fieldname EQ 'TXTLG'.
gw_fcat-outputlen = 70.
ELSEIF gw_fcat-fieldname EQ '/CPMB/HIR'.
gw_fcat-outputlen = 20.
ENDIF.
MODIFY gt_fcat2 FROM gw_fcat
TRANSPORTING reptext no_out outputlen.
ENDLOOP.
lcl_main=>create_dynamicalv( ).
lcl_main=>merge_tables( ).
CHECK NOT <gfs_t_final> IS INITIAL.
* SORT <gfs_t_final> BY ('TXTLG').
CALL SCREEN 9000.
ENDIF.
ENDIF.
ENDMETHOD. "show_alv1
METHOD show_alv1.
IF go_custom_container IS INITIAL.
CREATE OBJECT go_custom_container
EXPORTING
* parent =
container_name = gw_g_container
* style =
* lifetime = lifetime_default
* repid =
* dynnr =
* no_autodef_progid_dynnr =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_grid1
EXPORTING
* i_shellstyle = 0
* i_lifetime =
i_parent = go_custom_container
* i_appl_events = 'X'
* i_parentdbg =
* i_applogparent =
* i_graphicsparent =
* i_name =
* i_fcat_complete = SPACE
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD go_grid1->set_table_for_first_display "#EC CI_SUBRC
* EXPORTING
* i_buffer_active =
* i_bypassing_buffer =
* i_consistency_check =
* i_structure_name =
* is_variant =
* i_save = 'X'
** i_default = 'X'
* is_layout =
** is_print =
** it_special_groups =
* it_toolbar_excluding =
* it_hyperlink =
* it_alv_graphics =
* it_except_qinfo =
* ir_salv_adapter =
CHANGING
it_outtab = <gfs_t_final>
it_fieldcatalog = gt_fcat2
* it_sort =
* it_filter =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
ENDIF.
ENDMETHOD. "SHOW_alv1
ENDCLASS. "lcl_main IMPLEMENTATION
AT SELECTION-SCREEN OUTPUT.
IF p_radio1 EQ 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'M1'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
* IF screen-group1 = 'M'.
* screen-active = 0.
* MODIFY SCREEN.
* ENDIF.
ENDLOOP.
ENDIF.
* IF p_radio2 EQ 'X'.
* LOOP AT SCREEN.
* IF p_reason EQ 30.
* IF screen-group1 = 'M2'.
* screen-active = 0.
* MODIFY SCREEN.
* ENDIF.
* ENDIF.
* ENDLOOP.
* ENDIF.
START-OF-SELECTION.
IF p_radio1 EQ 'X'.
SELECT SINGLE data_table desc_table
INTO (gw_datatbl , gw_descrptbl)
FROM uja_dimension CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim.
IF sy-subrc EQ 0.
SELECT appset_id dimension tech_name attribute_name caption
INTO TABLE gt_attr
FROM uja_dim_attr CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim.
IF sy-subrc EQ 0.
lcl_main=>create_alv1( ).
ENDIF.
ENDIF.
ELSE.
IF p_reason NE 30.
SELECT *
INTO TABLE gt_except
FROM zbpcbt007 CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim
AND reasoncd EQ p_reason.
IF sy-subrc EQ 0.
SELECT SINGLE data_table desc_table
INTO (gw_datatbl,gw_descrptbl)
FROM uja_dimension CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim.
IF sy-subrc EQ 0.
SELECT appset_id dimension tech_name attribute_name caption
INTO TABLE gt_attr
FROM uja_dim_attr CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim.
IF sy-subrc EQ 0.
gt_except_t[] = gt_except[].
SORT gt_except_t.
DELETE ADJACENT DUPLICATES FROM gt_except_t.
IF gt_except_t IS NOT INITIAL.
SELECT tech_name
INTO TABLE gt_techattr
FROM uja_dim_attr CLIENT SPECIFIED
FOR ALL ENTRIES IN gt_except_t
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim
AND attribute_name EQ gt_except_t-attrib.
IF sy-subrc EQ 0.
lcl_main=>create_alv2( ).
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ELSEIF p_reason EQ 30.
SELECT SINGLE data_table desc_table
INTO (gw_datatbl,gw_descrptbl)
FROM uja_dimension CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim.
IF sy-subrc EQ 0.
* gt_except_t[] = gt_except[].
* SORT gt_except_t BY attrib.
* DELETE ADJACENT DUPLICATES FROM gt_except_t COMPARING attrib.
* IF gt_except_t IS NOT INITIAL.
SELECT refdimension
INTO TABLE gt_refdim
FROM zbpcbt009 CLIENT SPECIFIED
* FOR ALL ENTRIES IN gt_except_t
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim
AND attrib EQ p_attr."gt_except_t-attrib.
IF sy-subrc EQ 0.
gt_refdim_t[] = gt_refdim[].
SORT gt_refdim_t BY dimension.
DELETE ADJACENT DUPLICATES FROM gt_refdim_t COMPARING
dimension.
IF gt_refdim_t IS NOT INITIAL.
SELECT data_table desc_table
INTO TABLE gt_refdata
FROM uja_dimension CLIENT SPECIFIED
FOR ALL ENTRIES IN gt_refdim_t
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ gt_refdim_t-dimension.
IF sy-subrc EQ 0.
SELECT appset_id dimension tech_name attribute_name
caption
INTO TABLE gt_attr
FROM uja_dim_attr CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim.
IF sy-subrc EQ 0.
SELECT tech_name
INTO TABLE gt_techattr
FROM uja_dim_attr CLIENT SPECIFIED
* FOR ALL ENTRIES IN gt_except_t
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim
AND attribute_name EQ p_attr."gt_except_t-attrib.
IF sy-subrc EQ 0.
REFRESH: gt_refdim_t.",gt_except_t.
lcl_main=>create_alv3( ).
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
* ENDIF.
* ENDIF.
ENDIF.
ENDIF.
*& Module SHOW_ALV1 OUTPUT
*&-------Yes you can, although you need to do it slightly differently, depending on what your 'original' form is doing.
You end up having to do two things:
1. In your second tabular form, you need to explicitly identify the relevant form fields using calls to the relevant APEX_ITEM functions - as well as this, you need to 'manually' specify the array number in the arguments for the function call, ensuring it doesn't overlap with your original form. Normally, this aspect is done for you.
2. Create your own custom CRUD processes, referencing the above elements. There are a few threads floating around the forum relating to how to deal with this. Do a search for "APEX_APPLICATION.G_F" or "HTMLDB_APPLICATION.G_F" for pointers.
Happy hunting! -
User inputted letters with dynamic fields in Report Builder
I'm proactively trying to get certain aspects off our hands in IT and more specifically, the way letters are generated through ColdFusion. Right now we are using activeX controls (with some vbscript and asp pages) through IE to do Word mail merges for letter's for our students. We would like the user to be able to change these letters by themselves through our web application and have them saved in our database so they can be stored as a future template.
Now I'm new to Report Builder and have a few examples to show my colleagues, but I'm having troubles being able to dynamically insert the student's name (for example) into the report.
So basically I have an empty template with a huge dynamic box for the text which reads #param.MessageBody# that comes from a textarea within the cfm page. That works, but taking it one step further, I want to replace all instances of "%%StudentName%%" within that MessageBody with the actual student's name.
Since I cannot loop over the report and do my usual ReplaceNoCase(lMessageBody, "%%StudentName%%", Trim(ReportQueryLetters.StudentName), "ALL")>, how can I put this into a built-in function into the report?
I figured the function needs to be in <cffunction name="BeforeExport"> and while a simple display of the message works perfectly, I cannot get my replace line to work. I am passing the query to Report Builder instead of having it built-in, is that my problem?! I would prefer if it was external to save my stored procedures if I can. Is there any way to call the query to get that line to work?!
The code inside the cffunction (in report Builder):
<cfargument name="lTextArea">
<cfset lTextArea = #form.frmTextArea#>
<cfset lTextArea = ReplaceNoCase(lTextArea, "%%StudentName%%", Trim(ReportQueryLetters.StudentName), "ALL")>
<cfreturn lTextArea>
The error:
Element STUDENTNAME is undefined in REPORTQUERYLETTERS.Sorry for the late reply, just got back from vacation.
I don't think you use ReportQueryLetters for the query. it should be
query.StudentName
Also, you can have an intermediate step on the page that receives the
MessageBody and change the MessageBody before passing it as a parameter to the
report. -
Getting Records for Blank Date Field
Hi All,
I am trying to get all the records with blank Calday values, but not able to get the data in listcube or Query? how can I get this without using boolean function, range or manipulating data, in query i tried to restrict using # but no luck.
Thanks,
S.B.In the listcube, click on calday and when a selection comes on
in the box of calday right click and option -> equal and leave
blank the field. That will display everything blank
Thanks
Wons -
Dynamic fields creation on selection screen
Good evening everybody!
I've got the following problem for solving:
Imagine the following situation:
on the selection-screen there are some input fields in one line and a button after them. By pressing that button (e.g. it's name is "Add line") the same fields should be duplicated so many times as many times that button pressed. By pressing another button (e.g. it's name is "Delete line") one last line should be deleted. The mechanism is similar to adding lines in a screen table. What is the solution of this problem?
So: by pressing an "Add line" button on a screen identical fields should be created on the same selection-screen and deleted by pressing "Delete line".
Thanks in advance!Here's a way to do it.
DEFINE aline.
selection-screen: begin of line.
parameters: inp&1(5) type c modif id l&1.
selection-screen position 15.
parameters: inp10&1(5) type c modif id l&1.
selection-screen pushbutton 25(5) pb_&1 user-command add
modif id a&1.
selection-screen pushbutton 31(5) pb_10&1 user-command del
modif id d&1.
selection-screen end of line.
END-OF-DEFINITION.
TABLES: sscrfields.
DATA:
max_lines TYPE i VALUE 20,
fldname(60) TYPE c,
lines(2) TYPE n VALUE 1,
cnt(2) TYPE n VALUE 1.
FIELD-SYMBOLS:
<fld> TYPE ANY.
aline 01.
aline 02.
aline 03.
aline 04.
aline 05.
aline 06.
aline 07.
aline 08.
aline 09.
aline 10.
aline 11.
aline 12.
aline 13.
aline 14.
aline 15.
aline 16.
aline 17.
aline 18.
aline 19.
aline 20.
*---------------------------------------------------- Push Button
AT SELECTION-SCREEN.
CASE sscrfields-ucomm.
WHEN 'ADD'.
CHECK lines LT max_lines.
lines = lines + 1.
WHEN 'DEL'.
CHECK lines GT 1.
lines = lines - 1.
ENDCASE.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-group1 CP 'A*'.
IF screen-group1+1(2) NE lines.
screen-active = 0.
ELSE.
IF lines LT max_lines.
screen-active = 1.
ELSE.
screen-active = 0.
ENDIF.
ENDIF.
ENDIF.
IF screen-group1 CP 'D*'.
IF screen-group1+1(2) NE lines.
screen-active = 0.
ELSE.
IF lines = 1.
screen-active = 0.
ELSE.
screen-active = 1.
ENDIF.
ENDIF.
ENDIF.
IF screen-group1 CP 'L*'.
IF screen-group1+1(2) GT lines.
screen-active = 0.
ELSE.
screen-active = 1.
ENDIF.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
INITIALIZATION.
cnt = 1.
WHILE cnt LE max_lines.
CONCATENATE 'PB_' cnt INTO fldname.
ASSIGN (fldname) TO <fld>.
<fld> = 'Add'.
CONCATENATE 'PB_10' cnt INTO fldname.
ASSIGN (fldname) TO <fld>.
<fld> = 'Del'.
cnt = cnt + 1.
ENDWHILE.
Edited by: Paul Chapman on Jul 1, 2008 1:06 PM -
How to pass selection screen value to LDB dynamic field.
Hello everybody,
In my program, I am using standard LDB(PSJ) for getting data. And there is a requirement that I have to display some dynamic fields on my selection screen like plant , person responsible ( which are mandatory also ) etc. and inside the program I have to fill those dynamic fields for which the user has entered the value in selection screen.
Could you please tell me how to pass some of selection screen values to ldb dynamic fields before GET statement.
Thanks !!!
Regards,
Mitra>
Pavan Bhamidipati wrote:
> Hi,
>
>
I have to fill those dynamic fields for which the user has entered the value in selection screen.
>
>
> This means that the user is going to enter the values in the selection screen for the dynamic field values so
>
> SET PARAMETERID 'XYZ' FIELD p_field.
>
> where p_field is a parameter on the selection screen
>
> Regards
> Pavan
You can capture the values selected through the dynamic selections using some of the functions modules below, just search the forum for the below FM's, perhaps you can find some sample code
FREE_SELECTIONS_EX_2_RANGE
FREE_SELECTIONS_EX_2_WHERE
FREE_SELECTIONS_RANGE_2_EX
FREE_SELECTIONS_RANGE_2_WHERE
FREE_SELECTIONS_WHERE_2_EX
FREE_SELECTIONS_WHERE_2_RANGE -
Form Settings getting cleared for system form
Hi All,
I have added the code for setting editable=false for the following items in Updatemode and Ok mode.Then in add mode,i made the columns to editable = true .First time it is working fine.
the next time, I got the error message as "item is not a user defined item" on ItemCodeCol.editable = true.Then i check the form settings, the Active field for the itemcode cleared.When i set to Active as checked and run my code,it is working fine.How to solve the issue and how to avoid the setting of the fields.
This is my code :
If oSalesQuotationForm.Mode = SAPbouiCOM.BoFormMode.fm_ADD_MODE Then
oSQItemCodeCol.Editable = True
oSQItemNameCol.Editable = True
oSQQtyCol.Editable = True
oSQWhsCodeCol.Editable = True
ElseIf oSalesQuotationForm.Mode = SAPbouiCOM.BoFormMode.fm_UPDATE_MODE Or oSalesQuotationForm.Mode = SAPbouiCOM.BoFormMode.fm_OK_MODE Then
oSQItemCodeCol.Editable = False
oSQItemNameCol.Editable = False
oSQQtyCol.Editable = False
oSQWhsCodeCol.Editable = False
End If
Thanx in advance
Regards
Mohana
Edited by: Mohana Annadurai on Feb 20, 2009 5:28 AMHi,
This is not UDF in system form.That is , the itemcode,itemname,qty,warehouse field in the content tab of the sales quotation form.when i change the field to editable and noneditable,
1)it is allowing to set the editable property to false and true for the first time.
2) After adding the record,i navigate the record to check ,at that time,as per my code,in update mode,it is not allowing to edit.
3)When i click add menu,and i chose customer, at that time it is not allowing to add a itemcode,becoz the itemcode field is disabled.
4)when i check in form settings, in Table format, Active gets unchecked for the above fields.
5)I want to avoid this changing of active in form settings.How to to this...
Regards
Mohana -
F4 help for PO number field with SELECT OPTIONS
Hi all,
I have a field (PO no) using SELECT OPTIONS on my selection screen.I need F4 help for this field.How shud i declare it?
I have declared it as follows:
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
select-options sel_po for ZPO_LOI-zobject_id obligatory .
SELECTION-SCREEN END OF BLOCK b1.
ZPO_LOI is a table view with a z data element ZOBJECT_ID to which i have attached a search help which displays the required values for the PO field in the selection screen.But now the problem is i cant see the F4 icon for the field on the sel screen.
Please help.Hi I have a sapmle code for this.
*& AT SELECTION SCREEN ON VALUE REQUEST
*-- F4 help for IDOC numbers
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_docnum-low.
PERFORM value_request_status USING 'S_DOCNUM-LOW'.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_docnum-high.
PERFORM value_request_status USING 'S_DOCNUM-HIGH'.
*& Form value_request_status
text
-->fp_field dynpro field that gets the return value
FORM value_request_status USING fp_field TYPE dynfnam.
STATICS tl_values TYPE STANDARD TABLE OF tp_value.
IF tl_values IS INITIAL.
SELECT docnum FROM edidc UP TO 500 ROWS INTO TABLE tl_values
WHERE credat IN s_credat
AND cretim IN s_cretim.
IF sy-subrc eq 0.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'DOCNUM'
dynpprog = syst-repid
dynpnr = syst-dynnr
dynprofield = fp_field
value_org = 'S'
TABLES
value_tab = tl_values
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc IS NOT INITIAL.
MESSAGE i999(zz) WITH 'No values found'(004).
ENDIF.
ENDIF.
ENDIF.
ENDFORM. " value_request_status
Regards,
Amit. -
Maximum allowable input for select-options
Hi All,
Can we enter any number of values in select-options on the selection screen. What is the limit on the number of values that can be given for select options.
For example if the limit for a select-options field is 100000 and if i want to give 999999 values as input on the selection screen, how am I supposed to handle this.
Thanks in advance,
MadhuHi Madhu,
see the sample code below .. i hope it this will help you..
SELECT-OPTIONS: s_order FOR vbak-vbeln . "Default the value range 100000 to 9999999 appears on the screen
INITIALIZATION.
* Loading default values to screen input for Sales Order field
MOVE 'I' TO s_order-sign.
MOVE 'BT' TO s_order-option.
MOVE '1000000' TO s_order-low.
MOVE '9999999' TO s_order-high.
APPEND s_order.
* Screen field Validation
AT SELECTION-SCREEN ON s_order.
if s_order-low NE 100000.
message 'Sales order Low value should be 100000' type 'E'.
endif.
if s_order-High NE 999999.
message 'Sales order High value should be 999999' type 'E'.
endif.
Regards,
Prabhudas -
Sum for Dynamic Fields in a Dynamic Table with Field Symbol
Hi All,
I currently have an report which I am looking to update with some totals. The information is currently output in an ALV which is fed data from a dynamic table defined with a field symbol. The modification that needs to be applied is a summation per currency code where each of the fields to be summed is a dynamically named field at runtime. I am now just looking to see if anyone has any recommendations on how to obtain these totals it would be appreciated. I have no problem doing the leg work in piecing the solution together but am just stuck on which approach I should be investigating here. I have looked into several options but do to the fact that the totals are for dynamic fields in a dynamic table and it is a field symbol I am having some difficulties thinking of the easiest approach to obtain these totals.
Below is a simple sample of what the report currently looks like and what we are looking to add.
====================================================================================
As-Is Report:
DETAILED DATA ALV
Company Code | Plant | 2006 Total | 2007 Total | 2008 Total | CURRENCY
0001 | ABCD | 1,500 | 1,200 | 1,700 | USD
0001 | BCDE | 2,300 | 4,100 | 3,600 | GBP
0003 | DBCA | 3,200 | 1,600 | 6,200 | USD
Addition 1:
TOTALS PER CURRENCY
Currency | 2006 Total | 2007 Total | 2008 Total |
USD | 4,700 | 2,800 | 7,900 |
GBP | 2,300 | 4,100 | 3,600 |
Addition 2:
CONVERSIONS TO USD
| 2006 Curr | 2006 USD | 2008 Curr | 2006 USD |
USD | 4,700 USD | 4,700 USD | 7,900 USD | 7,900 USD |
GBP (1.5GBP/1 USD) | 2,300 GBP | 1,150 USD | 2,300 GBP | 1,800 USD |
====================================================================================
Any recommendations will be appreciated.Hi,
We cannot use the key word SUM in the loop at assigning statement.
The way i see is
When you are creating the first dynamic internal table , create one more with the structure below:
Currency | 2006 Total | 2007 Total | 2008 Total |
Then while populating the data into first itab,also move the contents to the second itab using collect statement.
Maybe you are looking for
-
Action Pane in BPC Excel is not Coming
Hi All I am facing a sudden issue in BPC 7.5 MS Version. I am not able to view the Action Pane for BPC Excel. But it was coming before. Also the Action Pane is coming for BPC WORD & BPC POWER POINT. I have chekced the option under e-tools > VIEW PL
-
How to insert bulk records in a table
Hi to all, I have one view in which more the 3 lacks records are there and i have to insert that data in a table and used the code in which it taking a lot of time. I checked one case in which 2000 records are there it taking 5 min apprx. to insert i
-
Detail steps in dealing with Web Service to IDoc
Dear All, Iam dealing with Web Service to IDoc Scenario . I want detail steps like how to proceed from start to end of this scenario. Please do the needful. Thanks & Regards, Sarat
-
JPA/Toplink changes the query logic
Hi, Iam currently using JPA with Toplink implementation , i guess that toplink has its own way of optimizing the provided JPA query ; on another words , toplink sometimes changes the way you are using joins and exists statement to what looks optimize
-
FLV files will not play in flash player
I'm an old GoLive user and I'm becoming very frustrated with the new CS3 software. I am trying to encode a simple quicktime movie into flash using Adobe flash encoder and then embed it into my web page. Even when I use all the default settings in fla