Get MD04 Data in BW
Hi everybody,
I try to get the MD04 Data in BW.
I found this documentation (http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e05de889-0b30-2d10-4f9c-c4c2db5052ec?QuickLink=index&…) and it is really helpful.
The problem is that the load takes a long time (around 3h) and it might be a problem for a daily extraction.
So I am looking for a way to reduce significantly this load.
Is there a way to make your datasource delta enabled ? Or a Full Load with selection of dates ? Or another solution ?
Thank you very much for your help.
Regards,
Nicolas
open the API (MD_STOCK_REQUIREMENTS_LIST_API) in SE37... there are plenty of input variables
check SAP Market Place for possible performance issues of this API
Similar Messages
-
Function module to get md04 data
I need function module to get below data of the material as per the mrp area.
Thanks,
KiranHello Kiran and Kumar
As I have explained in the following thread, BAPI_MATERIAL_STOCK_REQ_LIST should be used instead of MD_STOCK_REQUIREMENTS_LIST_API.
Material shortage report after mrp run.
BR
Caetano -
How to get changed data in ALV in Web Dynpro for ABAP
METHOD on_data_check .
DATA:
node_spfli TYPE REF TO if_wd_context_node,
node_sflight TYPE REF TO if_wd_context_node,
itab_sflight2 TYPE if_display_view=>elements_sflight.
node_spfli = wd_context->get_child_node( name = if_display_view=>wdctx_spfli ).
node_sflight = node_spfli->get_child_node( name = if_display_view=>wdctx_sflight ).
CALL METHOD node_sflight->get_static_attributes_table
IMPORTING
table = itab_sflight2.
this code is ..get all data(changed and not changed)
but i want get changed data only, not all data.
how to get changed data?
Edited by: Ki-Joon Seo on Dec 27, 2007 6:04 AMHi,
To get only the changed data in the ALV grid of a WD, you need to capture the "ON_DATA_CHECK" of the ALV grid.
To this please do the following in the ALV initialization of the ALV table settings :
lr_table_settings->set_data_check(
IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CELL_EVENT ).
You may also do this:
lr_table_settings->set_data_check( IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CHECK_EVENT)
The above two ways would depend on when do you need to check for the changed data. If you want to check the data as soon as it is entered, then use the first method. Else, use the second method.
You need to register an EVENT HANDLER for this event.(You may do this in your VIEW or Component Controller).
In this Event handler, you would find an importing parameter R_PARAM which is a ref type of IF_SALV_WD_TABLE_DATA_CHECK.
The attribute T_MODIFIED_CELLS of this interface IF_SALV_WD_TABLE_DATA_CHECK will contain the modified cells of the ALV with the old & new values. -
I have a situation, where i need to write expression Period to date(PTD). i want to know how to get the period date. i want you to help in writing Period date or else is there any function to get period date for a given date(the date is given
from the parameter dynamically) in MDX for SSRS report
ramHi ram,
Per my understanding that you want to get the period date based on the month selected and the given date, right?
Could you please provide details information below to help us better understanding your requirements, thus we will be more effective to provide an solution:
What is the format of the period date you want to get, is this date in the DB and you want to filter it based on the month and the given Date?
Did the month and given date are two parameters in the report? if possible, could you please provide some sample data in the DB and also the snapshot of the report structure
I assume you want to get the period date(mm/dd/yyy) between the select month(e.g:Feb) and the given date (10/1/2014) and you should get the date between(02/01/2014-10/1/2014).
If so,and you also have two parameter "Month","EndDate"(EndDate is the given date), please reference to details information below:
You can create an new parameter "BeginDate" (Date/Time) which is the begin date of the period, you can use the expression to get the value based on the value of the month and the year value from the given date,finally hide this parameter:
Specify the available value:
Label:=Parameters!Month.Value &"/01/"& DatePart("yyyy",Parameters!EndDate.Value)
Value:=CDate(=Parameters!Month.Value &"/01/"& DatePart("yyyy",Parameters!EndDate.Value))
Specify the default Value:
Value:=CDate(=Parameters!Month.Value &"/01/"& DatePart("yyyy",Parameters!EndDate.Value))
Add filter to the dataset as below:
Preview you will get all the date in the given Period:
If you still have any problem, please feel free to ask.
Regards
Vicky Liu -
How to get the data from a cluster table to BW
Dear All,
I want to extract the data from R/3 to BW by using 2 tables and one Cluster B2.
Actually my report contains some fields from PA2001, PA2002 and one cluster table B2 (Table ZES). Can I create View by using these 3 tables? If it is not possible how can I get the data from the cluster? Can I create generic datasource by using cluster tables directly?
In SE11 Transaction the Cluster (table ZES) is showing invalid table.
I referred some Forums, but no use.
Can any body tell me procedure to get the data from a cluster (table ZES) ?
Waiting for you results.
Thanks and regards
RajeshHI Siggi,
Thank you for your reply..
I am also planning to do FM to get the data. But it is saying that the Cluster table ZES does not exist (ZES is the the standard table, in SE11 also).
How can I use the Fields from the that table.?
What can I do now, can you please explain me about this point.
Waiting for your reply.
Thanks and Regards
Rajesh
Message was edited by:
rajesh -
Why do we get the data from a view to a report.
hi
why do we get the data from a view to a report. is it possible to get the data from a view in all the cases?hi Jyotssna,
Suppose you are planning to get the data from multiple tables then you got to specify seveal condtions and make use of joins which results in poor performance in fetching the data . In order to improve the performance we make use of views where the conditions of different tables are defined and the data is fetched accordingly.
Regards,
Santosh -
My wife bought an iPad Air and synced contact from our PC (Outlook), now all our contacts in Outlook have gone and we have to go to iCloud to get them, and even then they are a bit jumbled. How do I get my data back onto my PC?
If you can see the iCloud contacts in Outlook, you can copy them back to your PC by selecting all the contacts (click one, then press Control-A), then drag and drop the selected contacts to Contacts under My Contacts on the left sidebar of Outlook.
If you want to copy your calendar back to Outlook, select your iCloud calendar on the left sidebar of Outlook, switch to the list view (select View from the ribbon, then click Change View>List), select your events (click on a single event, then press Control-A), then control drag and drop them to Calendar under My Calendars on the left sidebar.
Then you can sign out of iCloud on the iCloud control panel and your local copies will still be there. If you want to add your iCloud email account back to iCloud, you can do this with these settings: http://support.apple.com/kb/HT4864. -
i recently lost my iphone4 and erased all my data, then i found it... how do i get my data back
Your data should be on your computer.
-
If someone has wiped my ipad and changed passwords on icloud how do i get my data back
if someone has wiped my ipad and changed passwords on icloud how do i get my data back? please could someone help me out thanks
How did they wipe it? By using Find My iPad and performing a wipe? If so, that means they have your icloud ID and password, not a good thing.
You could try connecting it to iTunes and performing a restore from iCloud. But if they changed password, then you are out of the loop. How did they get your password in order to change it? -
I backed up my ipod. I then updated it but all of my data is still gone. How do I get my data back??
Were the app in your iTunes library? If not the app data in the backup has no place to go. Redownload the apps in your iTunes libaray
Downloading past purchases from the App Store, iBookstore, and iTunes Store
and then restore from backup.
iOS: How to back up and restore your content
Otherwise, try restoring from backup again.
If still problem that means the backup does not include the data. -
How do i get my data back if i restored my ipod touch
how do i get my data back if i restored my ipod touch
The backup that iTunes makes does not include synced media like apps and music.
Redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
and then restore from the same backup again. -
How do I get my data out of Keeper HD after updating iOS 7.1
Recently I updated my iPad to iOS 7.1 and now my free Keeper HD won't open so I can get my data out.Keeper support say they can't assist
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Delete the app and redownload.
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
Cheers, Tom -
Hello,
I formatted my computer without backup all of my favourites in Firefox. I have Firefox sync account set up before that between the 2 computers but both of them have formatted. Now, how do I get the data out from my Sync account? Did Firefox save my data on their server and how can I check that?
Thanks,Also:
*If you have regenerated your Sync key or reset your Sync password, you can not recover your previous data
*IMPORTANT - write down your Sync key as instructed in the original set up of Sync
*if you have another device (computer or mobile) paired to the computer where you are having a problem, you can either:
*#pair the problem computer to that other device
*#get the Sync key from that other device
'''<u>Remember</u>''', Sync was never intended for backup. The reason for its existence is to sync-up 2 devices. To back up your Firefox profile, which you should do frequently, to another drive or a pin/thumb drive or other backup media, see:
*https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile
*http://kb.mozillazine.org/Recovering_a_missing_profile -
My iphone battery died and on charging the phone it asked me to connect to itunes and restore the phone.
If i restore the phone how can i get my data back and how can i check when i last backed up my phoneIf you have been syncing regularly as the iphone is designed, then you can sync the data back.
Regardless you will have to restore the iphone. -
Actually I couldn't use internet for approx 1 year. I thought My every detail is safe on FF server Now. when I am trying to sync my details in old sync, in first few attempt it can't login, but eventually it successfully logs in. but nothing is synching. So tried the same thing in New Synch. but When I try to login with same details It says unknown account. So I thought making new account with same id would overwrite data with new one. so I didn't. If there is any way I can get my data back, atleast some of it. As its quite important.
It's "safe" when you use it as intended, for synchronizing Firefox data between multiple devices. Sync was not intended to be used as you tried to use it; as a backup medium or "cloud".
Maybe you are looking for
-
Unable to get my tabs back after power outage and "restore previous session" doesn't show up.
Well, I've spent most of my day trying to figure out how to fix this. My power unexpectedly went out overnight and I left my computer on. When I woke up, i saw that the computer was off. So I started my computer, but when I went to get onto Firefox,
-
when i try to log onto firefox it wont let it open sometimes and if it does when i try to use it the broadband stalls or freezes but i can have an IE window open and its working ok
-
Router suggestions for 10/100/1000
Anyone have a suggestion for a router that would provide 6 ports at gigabit speeds? I would like to set up 2 Express's as a roaming wireless network and have 2 desktops that would benefit by having gigabit speed and 2 network printers. If I buy a new
-
Scroll with mouse scroller - possible?
hello! i'm in desperate need!! for this website i'm helping in, the client wanted me to scroll this section with words AND images. so , i used the scroll pane component from Flash mx8. it works. but, now the client wants it to scroll faster when usin
-
[Solved] Date command not working, maxing out memory and cpu.
So I've encountered and incredibly strange problem. Today, I was working on a script for my bar panel. I was following z3bra's guide "Meeting at The Bar Really simple stuff, nothing harmful: #! /bin/sh # Fox - do whatever # Gathers various info to be