Get message "Driver is enabled, but has not been start

I have a Soundblaster Audigy, which has been OK for quite some time. My PC runs XP.
Recently it has stopped working. Now I get a message in the properties box of the driver saying "Driver is enabled, but has not been started". I have tried everthing I could find on Internet; reinstall, check enumerator is working, switching slots, etc. Nothing brings it back to li've. I am wondering if someone knows a trick to correct this situation without having to reinstall Windows XP. I really would appreciate some help.

Apart from re-installing XP, which is by far the best option, you might first try a registry cleaner, try www.majorgeeks.com.

Similar Messages

"Driver is enabled but has not been started" Help me, plea

Hi. I have this, quite old, computer, that has always worked.
For my 8th birthday I got a set of 5. speakers, and I realized that I don't have a soundcard that supports 5. speakers.
I bought a sound card from Creative, and it worked perfectly!
Now, just like 3 months ago, I was sitting, listening to music, and was going to send a friend a li've voice-clip on MSN-Messenger. I saw that the microphone wasn't working, so I just rebooted the comp in case I changed some settings (which I hadn't).
I started the comp again, and learned that NO SOUND AT ALL was working. I was quite shocked, but then assumed my soundcard experienced a conflict of some sort, so I returned it to the store I bought it at.
The same problem is still here, I have this brand new SoundBlaster card, but it says, if I start WinAmp for example: "Bad DirectSound driver. Please install proper drivers or select another device in configuration. Error Code: 88780078"
And when I check my sound drivers in the control panel > Sound > Sound Blaster Audigy drivers > Audio Devices > Sound Blaster Audigy > Properties: "Status: Driver is enabled but has not been started yet."
I've talked with a guy from Creative Nordic, but it seems like it won't help, even if he gives me instructions. I've tried switching PCI-ports, reinstalling software/drivers, reinstalled the card itself, disabling the OnBoard Soundcard in BIOS, NOTHING WORKS!
It seems like I have to buy a new motherboard, or reinstall windows, but that seems abit unnecessary since the problems seems to be in my motherboard.
If anyone knows anything about this PLEASE answer! I've been without sound for three months now =/
Please ask if you wonder anything else concerning my problem, if it helps!!
Kind regards,
Babbas.Message Edited by Babbas on 09-8-200706:3 PM

Sounds like you checked the digital output box. Go to the creative Speaker Settings and you should see the digital output box, uncheck it if its checked and that should fix you up. I see where alot of people do that and don't realize it. If thats no the case then I'm not sure, sorry

I have a problem when starting my Macbook. A message saying /Library/StartupItems/Icon has not been started due to not having the right security settings. So far it is not under HD og system folder, nor can't find via terminal. Any good suggestions?

I have tried to delete it via terminal but no luck, have also run a disk permissions repair but no luck.
I still shows when starting the mac or restarting it.
Any of you have a good suggestion of what do??
Just hate when it appears every time I start the Mac

What items do you have in the Startup Items of your System Preference for your present login user? Maybe removing and adding them back in will help?
/Applications/iTunes.app/Contents/Resources
includes the iTunes Helper application in case you need to reconnect it later.

Condition record exist, but has not been set

I am creating proforma invoice for STO replenishment delivery. I am getting error log "Billing type contains split criteria, n invoiced:123456789, invoice not required". But I am able to save it. I used all standard settings for copy control and billing type.
For the proforma invoice the condition records are picking up some times and some times not picking up. In the analysis its showing "Condition record exist, but has not been set". When I update with carry out new pricing some times its updating with condition records some times not. I need a solution urgently. Please help.
Edited by: k c on Nov 4, 2009 7:50 AM

Hello,
The message "condition record exists, but has not been set" tells you
that the condition record exists, but has not been set in the document.
If pricing was carried out again for the document item, then the
condition would be set.
This can have different causes:
The condition was deleted manually in the item condition screen.
The condition record was created later. Please note that order
processing and pricing have buffer mechanisms. This means that a newly
added condition record might only be found after order processing have
been left completely and then started again.
When an item was added, the condition record was accessed with key
fields other than change time. This could lead to different results in
the requirements check at the time of adding and the change time. This
can occur when modifications are made.
In billing (or when copying orders): Certain condition types were not
determined in the source document (this is usually controlled by the
pricing requirements). When creating the document, the document flow
(TVCPF,TVCPA) is processed using a pricing type that does not
redetermine these condition types, although they are supposed to be
called via the requirments."
Please check if any of those reasons apply to your problem.
Note that the condition type is determined just in the moment when
   the billing item is created. And it then that the userexit fills the
   field. When you save the billing document, pricing is called.
   Please ensure that you have any userexits switched off and then test
   this issue again.
If you have access to OSS notes. please see:
     24832      Pricing rules / TVC
    130416     Requirements in the condition preliminary st
      27636     Message: Condition exists (removed manually)
    859876     Condition is missing: Message VE 108 or VE 008
I hope you find this information very helpful and hopefully it will solve your problem.
Regards,
Martina McElwain
SD - Forum Moderator

Word has not been started on this computer

I have the Adobe Technical Communication Suite and Microsoft
Office 2007 installed on my office computer. My operating system is
Windows Vista. In RoboHelp HTML, I have been trying to generate
printed documentation through the Single Source Layouts, but I
receive the following error message every time: "Microsoft Word has
not been started on this computer. Launch Word and click the 'Start
using Microsoft Word' option before generating Printed
Documentation again."
I have indeed opened Word--many times in fact--and I don't
see an option for "Start using Microsoft Word," so I'm stumped.
I am an administrator on the computer, and I installed both
Office 2007 and TCS, in that order, on my system.
In attempting to resolve the problem, I have
- Tried to generate printed documentation for both old and
new projects
- Tried generating .doc, .docx, and .pdf files.
- Uninstalled TCS and Office 2007 and reinstalled them, with
Office 2007 first and then TCS.
- Enabled all macros in Word 2007.
- Removed PDFMaker.dot, according to the suggestion on in the
Print Issues section of Peter Grainge's Web site.
None of these attempts has corrected the problem.
Interestingly, though, I can import a Word file into my RoboHelp
HTML project just fine.
If anyone has any suggestions for how to resolve this
problem, I would be most grateful.

I've got it! As you assume, Peter, is has to do with the roaming profile. The RoboHelp templates were in the roaming profile (C:\Users\xxx\AppData\Roaming\Microsoft\Templates - where xxx ist my user name) but in Word they were not activ. I could activate them in Word (in Word-Options / Add-Ins / Manage ... go to) but when I restart Word, they were inactive again.
Now I changed in Word-Options/Extended/General button "path for files" the path for "user templates" and "startup" to directories outside the roaming profile (i.e. c:\robohelp\startup). I copied the RoboHelp Templates (PrintDoc.dot, Style Mapping.dot and RoboHook.wll) to the new "startup"-directory. I started Word and now the RoboHelp templates were active!
ThenI started RoboHelp HTML and tried to generate printed documentation - and now it worked For a short time I could see a message like "waiting for register VBA macros". I think that was the most important thing. But I don't know what happend in the background (couldn't find anything in the registry) Now I changed the path back to my originally roaming profile-directories - and the "printed documentation" still works!
Best wishes
Olaf
P.S.:
I use the German version of Word 2007, so maybe my translations are not correct - sorry
German (what I saw)
my translation
Word-Optionen
Word-Options
Add-Ins
Add-Ins
Verwalten ... Gehe zu
Manage ... go to
Erweitert
Extended
Allgemein
General
Dateispeicherorte
Path for Files
Benutzervorlagen
user templates
AutoStart
Startup
I believe, in other cases the start of "RoboHelp for Word" did the same thing - register the VBA macros - Don't know, why it didn't worked in my case

I keep getting an error message when I plug my iPhone into my computer. It says, "This iPhone cannot be used because the Apple Mobile Device has not been started." This has never happened before when I plugged it in - now the iPhone won't show up at all.

Someone please help! I do not know how to fix this. It keeps saying my Mobile Device has not been started and I can't get my phone to show up in the iTunes window AT ALL. It will charge while plugged in, but it just won't come up in iTunes.

Sorry, the error message should read, "...the Apple Mobile Device service has not been started."

Help!! Can someone help me with this message I keep getting before startup, please ?? Here it is: "/Library/Startupitems/Intego Backup Manager Pro" has not been started because it does not have the proper security settings. Help!?!?

Hello:
I keep getting this message upon startup. Can't figure out how to address it. Here it is.
"/Library/Startupitems/Intego Backup Manager Pro" has not been started because it does not have the proper security settings.
Any suggestions?

There's an invisible one name "Icon" according to the error message.
Enable Finder to Show Invisible Files and Folders
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following command line then press RETURN.
defaults write com.apple.finder AppleShowAllFiles TRUE
killall Finder
To turn off the display of invisible files and folders enter or paste the following command line and press RETURN.
defaults write com.apple.finder AppleShowAllFiles FALSE
killall Finder
Alternatively you can use one of the numerous third-party utilities such as TinkerTool or ShowHideInvisibleFiles - VersionTracker or MacUpdate.
First, make invisible files visible. Find the invisible file in that folder and remove it. Please be sure you are looking in the /Library/StartupItems/ folder. There is another one in the /Home/Library/ folder. Be sure you look in the right one.

My IPad screen is frozen with a message stating that the IPad has not been backed up to the ICloud for 7 weeks, this is not correct.I cannot get the messageto clear and cannot access any of the other icons; is there an emergency reboot process?

My IPad screen is frozen with a message stating that the IPad has not been backed up to the ICloud for 7 weeks, this is not correct. I cannot get the messageto clear and cannot access any of the other icons; is there an emergency reboot process?

Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost.

Why do I get an error message when I try to sync my IPAD with ITunes? Message reads Cannot be used because Apple Mobile Device Service has not been started.

Why do I get an error message when I try to sync my IPAD with ITunes? Message reads Cannot be used because Apple Mobile Device Service has not been started.

AMDS for Windows
http://support.apple.com/kb/TS1567

My iTunes wont launch I get the following message: This version of iTunes has not been correctly localized for this language. Please ru the English version. I click OK and nothing happens

my itunes wont launch
I get this message
This version of iTunes has not been correctly localized for the language, please run the english version.
I click OK and nothing happens

Hi there Scottielongdrive,
You may want to try removing and reinstalling iTunes as an initial troubleshooting step. Take a look at the article below for more information.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
-Griff W.

When I turn on my computer I get the following error messages: Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings. Also for HP Trap Monitor. How do I fix these?

When I turn on my computer I get the following error messages:
Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings.
Insecure Startup Item disabled. "Library/StartupItems/HP Trap Monitor" has not been started because it does not have the proper security settings.
How do I fix these?

Library/LaunchAgents: com.promethean.activmgr.plist
Library/LaunchDaemons: com.microsoft.office.licensing.helper.plist, com.promethean.activhardwareservice.plist
Library/StartupItems: HP IO folder - HP IO, Resources, StartupParameters.plist
HP Trap Monitor folder - HP Trap Monitor, Resources, StartupParameters.plist
These are the system extension errors
"/System/Library/Extensions/AppleGraphicsControl.kext"
"/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/AppleMux Control.kext"
"/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/ApplePoli cyControl.kext"
"/System/Library/Extensions/BJUSBLoad.kext"
"/System/Library/Extensions/EPSONUSBPrintClass.kext"
I do not know what any of these do or how to fix them. I have run multiple disk permission repairs & disk repairs. The startup & system extension errors continue to come up.
I even followed the directions to move HP IO & HP Trap Monitor to the trash, run disk permissions repair, put back in folder, then restart - and still am getting error message.

Everytime I start up my MacBook Pro, I get this message. 'Insecure Startup Disabled.' "/Library/Startup items/HP Trap Monitor" has not been started because it does not have the proper security settings.

Everytime I start up my MacBook Pro, I get this message. 'Insecure Startup Disabled.' "/Library/Startup items/HP Trap Monitor" has not been started because it does not have the proper security settings.

Update your HP Printer drivers/software at their website or uninstall using the developers method.

I cannot get apps from the itunes store and there is a message that this apple id has not been used with the itunes store

i cannot get apps from the itunes store and there is a message that this apple id has not been used with the itunes store

I have the same problem and when I review my account and enter my cc info it tells me "Your request is temporarily unable to be processed. Please try again later." and this is day 5 of trying again later. What the **** is the prob? It isn't the card bc it has plenty of $$$ on it.

Hi.. I am reinstalling ios on macbook. While doing process, it asks for the Apple id and password. I am providing the id but it displays the message that apple user id has not been used with apple store... what shall I do to make my id work. Please assist

Hi.. I am reinstalling ios on macbook.
While doing process, it asks for the Apple id and password. I am providing the id/password but it displays the message that apple user id has not been used with apple store... what shall I do to make my id work. Please assist

Just to clarify, iOS is the operating system for iOS based devices such as the iPod touch, iPhone, and iPad.
Your Mac runs on OS X.
As for your Apple ID, help here > Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store

Everytime I start up my macbook pro get error message Insecure Start Up Item Disabled /Library/Startupitems/HPTrapMonitor has not been started because it does not have the proper security settings

everytime I start up my computer I get error message
Insecure Start-Up Item Disabled
"/Library/StartupItems/HPTrapMonitor" has not been started because it does not have proper security settings

Hope info from this article helps.
http://support.apple.com/kb/TS3493
Best.

Get message "Driver is enabled, but has not been start

Similar Messages

Maybe you are looking for