Get messagewhen syncing iphone no longer connected or not responding

I have tried to transfer ringtones from my computer or memory stick to my iphone. These ringtones were previously on this phone but are gone. Each time I try to sync them again, I get the message "your iphone is no longer connected or is not responding". It is physiaclly connected so I'm losing connection internally.How do I fix this problem?

If you are using a USB hub for the iPhone, don't. If you are using a front port on a desktop or tower computer, don't.

Similar Messages

  • ITunes could not sync information to the iphone because a connection could not be established to the iphone

    I  thought I would restore my iphone so I backed it up  and everything it backed up fine.
    It will put the firmware on the phone fine it also syncs but it come up and says warring it didn’t sync the number of apps. Then I press ok then I get this.
    iTunes could not sync information to the iphone because a connection could not be established to the iphone
    When I re plug in the I phone in it shows it the data synced but it’s all other
    It’s just a 8 gig I phone
    I up dated to windows 7 so I thought that was it so I tried it   with windows xp  the same thing happened
    And the newest I tunes would a older I tunes work

    I thought some screen shots may help
    The first one is at it syncs you can see at the bottom the apps are green and the other is yellow like it should be.
    this one is after  it syncs  and the frist Warning  notice the other now
    warn #2
    warn #3
    and the i phone

  • TS1398 Updated to ios6 now lost all wifi connection both iPad and iPhone no longer connects to wifi

    Updated to ios6 now lost all wifi connection both iPad and iPhone no longer connects to wifi

    not much response in here which surprises me...
    Anyway... AS I am still looking for answers, I will share a couple of points that I realised...
    in Airport Utility, I noticed that my iphone MAC address was actually showing as client connected, despite my phone network showing the spinning wheel next to the network name for ever and never actually connecting.
    I am currently testing the router mode in Network to be on DHCP and NAT mode with a range from .2 to .200
    My phone is now connected....
    Everything seems to be ok and happy so far...
    strange that this router and phone have worked together for at least a couple of years, the phone works everywhere else, and all other toys connect to my WIFI just fine. the list is as follow:
    airport extreme
    Zeppelin air
    2x apple tv
    2 ipads
    iphone 4s
    2 mac
    1 pc
    I have litterally just hard reset the router with a pin just now as a last resort... same...
    I will leave the router as DHCP & NAT until a potential firmware or OS update...

  • TS1398 cant get ipod or iphone 3gs to connect to new router.

    Have had a new router, and I cant get ipod or iphone 3gs to connect to it.

    Does the iPod see the network?
    Do you get an error message?
    Does it connect to other networks?
    Have you tried:
    - Resetting the iPod, Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Powering off and gthen back on your router
    - Reseting network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections

  • Ok my iphone 3g touch screen is not responding, i can recieve calls and it can charge and connect to itunes, but i cannot go any further than using the home button or the power button, but the slide feature and touch feature is non existent

    ok my iphone 3g touch screen is not responding, i can recieve calls and it can charge and connect to itunes, but i cannot go any further than using the home button or the power button, it is only the slide feature and touch feature that has become non existent.  Also, i have a f'ew cracks in my screen for a while now and it was running smoothly up until saturday when i sat on it applying large amounts of pressure to the phone screen.  Is there a way i can fix this myself without having to recover my phone to factory settings or wasting 50 bucks to get it fixed??

    Hi Dire Dawa,
    If the screen on your iPhone isn't responding, you may find the following article helpful:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Regards,
    - Brenden

  • HT201413 iphone 3gs is dead and not responding for DFU restore also. getting errors like 1600,1601 etc., any help?

    iphone 3gs is dead and not responding for DFU restore also. getting errors like 1600,1601 etc., any help?

    Mikey, I have the exact same problem. Dropped my 3gs on Thanksgiving, phone was not responsive, plugged into the wall charger, went to grey iPhone restore screen, then said to connect to itunes. So I plugged it into itunes but itunes wont recognize it nor will my computer. I searched the internet for hours with no success. I tried to change USB ports and cords, tired removing the SIM card, reinstalled itunes, everything. When I put it in DFU mode itunes recognizes an iphone in recovery mode, so I click restore and update, then I get error 1602 every time. My iPhone also loses power when I unplug it from the wall. I do not know what to try next. You are the only person I have found with the same exact problem I have. I will update you if I find a way to get my phone working again and I hope you will do the same. I'm very frustrated

  • When trying to download apps to my ipad, I get a message saying a secure connection could not be established and to check my date and time settings?

    When trying to download apps to my ipad, I get a message saying a secure connection could not be established and to check my date and time settings.  Can someone tell me what this means and how to fix the problem?

    It's a POP account. I decided to clean up my mailbox today after noticing the computer was real slow after USA Today started sending their daily top stories with new graphics. Also before I noticed the problem with mail deletion - two things happened. 1) I updated security sofware as prompted by Apple and 2) downloaded Mackeeper and went throught some preliminary scans but did not buy their package. Thanks forn nstaying with me.

  • HT201210 says cannot sync iphone - backup is corrupt or not compatable -tells to delete iphone backup.  What to do?

    says cannot sync iphone - backup is corrupt or not compatable -tells to delete. what should i do.  I already uninstalled and reinstalled all apple software and the latest itunes version...to no avail

    I have this problem too can somebody please help where are all the apple helpers? This is ridiculous!!!!

  • Hello. I have this situation: iphone 5s freezes and does not respond. connect to itunes to restore it, but there says that I should turn off search by icloud in the settings of cellphone. but if the phone freezes?? what to do?? help me please!!

    Hi. I have this situation: iphone 5s freezes and does not respond. connect to itunes to restore it, but there says that I should turn off search by icloud in the settings of cellphone. but if the phone freezes?? what to do?? help me please!! Thanks advanced!!

    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
    Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Confirm that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.

  • Can only sync iPhone/ipad through USB now not WiFi -  help please?

    can only sync iPhone/ipad through USB now not WiFi -  help please?

    Hi Iron Tommy,
    If you are having issues syncing your devices to iTunes via WiFi, you may find the troubleshooting steps outlined in the following article helpful:
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
    http://support.apple.com/kb/ts4062
    Regards,
    - Brenden

  • HT1351 for syncing it takes long time and not completed what to do???

    for syncing it takes long time and not completed what to do???

    Debbie:
    deborahfromwindsor wrote:
    he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
    Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
    That's where I would begin, too, with
    Repair Disk
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
    First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
    cornelius

  • XA resource [weblogic.jdbc.jts.Connection] has not responded in the last 120 second(s).

    I frequently encounter this problem: The application calls long-lasting stored
    procedure on Sybase which located in another country. Sometimes, WL 6.1 get stuck
    just and log the message "XA resource [weblogic.jdbc.jts.Connection] has not responded
    in the last 120 second(s)."
    Questions:
    Does increasing thread count help? Default is 15. Is 30 or larger OK?
    Can anybody share their experience on this matter?
    Detailed log messages in weblogic.log are follows:
    ####<Apr 21, 2003 5:03:48 PM GMT+08:00> <Warning> <JTA> <hkxp0032> <myserver>
    <Thread-0> <> <> <110030> <XA resource [weblogic.jdbc.jts.Connection] has not
    responded in the last 120 second(s).>
    ####<Apr 21, 2003 5:33:51 PM GMT+08:00> <Info> <JTA> <hkxp0032> <myserver> <Thread-0>
    <> <> <110207> <Previously unavailable XA resource [weblogic.jdbc.jts.Connection]
    is now available.>
    ####<Apr 21, 2003 5:33:56 PM GMT+08:00> <Warning> <JTA> <hkxp0032> <myserver>
    <Thread-0> <> <> <110030> <XA resource [weblogic.jdbc.jts.Connection] has not
    responded in the last 120 second(s).>

    Andrew Ng wrote:
    I frequently encounter this problem: The application calls long-lasting stored
    procedure on Sybase which located in another country. Sometimes, WL 6.1 get stuck
    just and log the message "XA resource [weblogic.jdbc.jts.Connection] has not responded
    in the last 120 second(s)."
    Questions:
    Does increasing thread count help? Default is 15. Is 30 or larger OK?Increasing thread count isn't going to help. The local server is just waiting for the
    remote system to respond.
    >
    Can anybody share their experience on this matter?
    Detailed log messages in weblogic.log are follows:
    ####<Apr 21, 2003 5:03:48 PM GMT+08:00> <Warning> <JTA> <hkxp0032> <myserver>
    <Thread-0> <> <> <110030> <XA resource [weblogic.jdbc.jts.Connection] has not
    responded in the last 120 second(s).>
    ####<Apr 21, 2003 5:33:51 PM GMT+08:00> <Info> <JTA> <hkxp0032> <myserver> <Thread-0>
    <> <> <110207> <Previously unavailable XA resource [weblogic.jdbc.jts.Connection]
    is now available.>
    ####<Apr 21, 2003 5:33:56 PM GMT+08:00> <Warning> <JTA> <hkxp0032> <myserver>
    <Thread-0> <> <> <110030> <XA resource [weblogic.jdbc.jts.Connection] has not
    responded in the last 120 second(s).>

  • My iPhone 5 lock button does not respond anymore I have heard this is a common fault with the iPhones?

    My iPhone 5 lock button does not respond at all I have heard that it's quite a common problem with the iPhone are apple fixing them or do I have to pay to get it done?

    As long as the iPhone is a UK ( I assume you are in UK ) purchased iPhone from the normal authorised Resellers ,Apple and the UK carriers and those selling the Carrier's  products like CPW or Phones -4 -U etc

  • TS1398 I have I-phone 4S - Since updating to IOS 6, when at home with Wi-Fi network with my I Phone connection is not responding sometimes – for example if I want to check my G-mail it shows loading but nothing happens and after few minutes it displays "C

    I have I-phone 4S - Since updating to IOS 6, when at home with Wi-Fi network with my I Phone connection is not responding sometimes – for example if I want to check my G-mail it shows loading but nothing happens and after few minutes it displays “Cannot Get Mail” – The mail server “imap.gmail.com is not responding, Verify that you have entered the correct account info in mail settings
    Other times the Wi-Fi connection works fine and it check e-mail or other within few seconds. The connection problems seems to be intermitted
    This issue never happened before with IOS 5 since I bought the new phone in Oct 2011.

    We suffered the imap.gmail.com server problem After an IoS 6 upgrade. The simple solution is to delete the problem account, shut down the iPad, start up again and reenter the account. Everything comes back normally. Good Luck everyone!

  • Unable to connect, server not responding

    Hello,
    We've resurrected a machine running 10.4.x from the dead back into use but it isn't happy with our network. It is configured correctly as far as I can tell. It responds to pings, can browse websites, and can mount other drives; however, when I try to mount the 10.4.x machine's drive from another machine I get the following:
    "Unable to connect - server not responding." Which I know is completely untrue after testing ping.
    I only entered the ip address in the Go > Connect to Server dialog. When attempting to connect from another machine I see a little more output:
    "The finder cannot complete the operation because some data in "afp://10.0.1.7" could not be read or written. (Error code -36)"
    I am lost here, any help or observations are highly appreciated.

    Hi kssi89, and a warm welcome to the forums!
    Well, in pure Apple File System talk... -36 ioErr I/O error (bummers)
    Not very helpful, but generally means a Drive quit being Readable or Writable since starting the operation...
    http://fuzzy.wordpress.com/2006/12/10/ioerror-36/
    But, in this instance I think it's not even starting to.
    Assuming Personal File Sharing is on on that machine & Internet Sharing is OFF, I might try trashing these, reboot and set it up again...
    /Users/YourUserName/Library/Preferences/ByHost/com.apple.networkConnect.<12 digit number>.plist
    /Users/YourUserName/Library/Preferences/com.apple.internetconnect.plist
    /Library/Preferences/SystemConfiguration/preferences.plist
    /Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
    /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
    /Library/Preferences/com.apple.sharing.firewall.plist

Maybe you are looking for

  • How to find my catalog in LR 5.5

    I have created 4 different catalogs over time. How do you find each one?

  • How to upload photos to Macbook?

    I'm a tad embarrassed asking this... ...I'm at a college program (I'm in high school) and I usually use my desktop computer for anything. I transferred everything on there on my laptop, and I had to delete a lot of stuff to actually make room. But as

  • HT204023 Is it safe to make a wifi hotspot on macbook pro?

    Is it safe to make a wifi hotspot on macbook pro. Can't it do damage on macbook pro?

  • My iPod touch's headphone jack is not working.

    I was in class listening to music regularly, when suddenly i pressed the play button again and there was no sound. i pulled out my Beat's jack and blew the ipod jack, which didnt help either. At first i thought it was my headphones, until i used my f

  • Upgrading from OS X 10.6.8

    I have a MacBook Pro from 2006 - a 2Ghz Intel Core Duo processor and OS X version 10.6.8 can I successfully upgrade to OS X 7 and then on to the latest X 10.9.2?