Get mor information from customer AI_SC_GET_SAP_CUSTOMER_NUMBERS

Hello,
In our solution manager, we are trying to get more customer information from sap.
In report AI_SC_GET_SAP_CUSTOMER_NUMBERS that call function BCSN_Z001_GET_VARS_DEBITS in remote RFC SAP-OSS to get all customer numbers.
i see that this function fill the table l_debits that have more information than the customer as well as name, phone, country, etc..
but we only can get the customer numbers.
is there any possibility to get more information as name, address, contact person, etc.. from Sap to solution manager synchronization process to get all customers data up-to-date ? thought this report or another one ?
thanks:
Luis
[update 09/08/2013] - just for try to answers my first scn post but still interested on any information from SAP for allow that information that can be important to have on solution manager after SMP update.

Similar Messages

While upgrading Adobe Creative Suite CS4 ME into Adobe Creative Suite CS5.5 Design Premium, I get an error saying This serial number is not of a qualifying product, please try another. I used to be able to get a code from customer service but I can't get

While upgrading Adobe Creative Suite CS4 ME into Adobe Creative Suite CS5.5 Design Premium, I get an error saying This serial number is not of a qualifying product, please try another. I used to be able to get a code from customer service but I can't get to the chat. Please advise!!!!

MoeGhazal I reviewed your account and it looks like you have have upgraded from a CS4 volume license for Design Premium to a retail upgrade of Design Premium 5.5.
I also show that you made two purchases of CS5.5 Design Premium but the second purchase was canceled. Please make sure you are utilizing the serial number which ends in 7886.
If you are using the correct serial number then it is likely the installer will not recognize your volume license CS4 serial number as being valid for an upgrade. If you can contact our support team then you can be walked through an unlocking procedure to allow you to proceed with the installation. You can contact our support team directly at Contact Customer Care. You may want to try installing a web browser you have not previously utilized. It is likely a toolbar or some other software application is affecting your ability to access chat support successfully.
If you are still unable to reach our support team then please verify the information under your account is accurate. If you can please then update this discussion after confirming this then I can request a member of our support team contact you directly.
Again I would recommend reaching out directly if possible as it will be the most efficient method of resolving your current error.

Iplanet web server 7 -how to get more information when a certificate is untrusted ?

Hi
When a client tries to access to iplanet 7.0.15, we only get a line in the errors log with a simple error., for instance SSL_ERROR_UNKOWN_CA_ALERT...
We would like to know if it is possible to configure iplanet to get more information about this request..
iPLANET is receiving requests from a lot of clients and sometime it is difficult to identify the source of a error without more information..
We would like have similar information that access log shows when certificate is valid
We get the same information with log-level = info or finest..
Thanks
Uge

Hi Uge,
Setting the iPlanet Web Server log level to 'finest' will give you more information, but it is very verbose, and you still might not get the information you are looking for. You might want to try 'fine' or 'finer' first to see if either of those gives you the information you need.
With regards to the above error, SSL_ERROR_UNKOWN_CA_ALERT, this means that the client presented a certificate in the SSL handshake that was signed by a CA that the Web Server doesn't have in it's certificate database. In order to ensure the Web Server is kept upto date with the latest set of public CA certificates, I would recommend you upgrade to the latest version.
If you know that the certificates the clients are using are from an internal CA, you need to ensure the Root CA Certificate from that internal CA is installed in the Web Servers certificate database as a trusted certificate.
regards
Tracey

Can CM12 hardware inventory get more information by calling a WMI Method

Hello Everyone,
i have a question for CM12 hardware inventory. here is my question
i'm now have a powershell script which can lists all the shared folder permissions or NTFS permissions. This powershell get such information by calling a WMI Method in Win32_LogicalShareSecuritySetting.
here is the powershell link http://gallery.technet.microsoft.com/scriptcenter/Lists-all-the-shared-5ebb395a
i'm now trying to implement this in SCCM 2012 R2. In SCCM client settings you can add a BASIC WMI classes very simply. But i didn't find a way to calling WMI classes Method by SCCM hardware inventory which can help me get more information just like
the powershell i posted.
i'm really not familiar with WMI and not under what is WMI method very clearly.. just hope someone can give me a quick answer of my question
Any help will be greatly appreciated
Thanks
MJQIAN

What is your exact requirement?
Creating a WMI provider is Hard. Really hard, but one created you will get real-time results.
However creating a static WMI class is easy. But the results need to be refreshed every so often to ensure that the data is relevant. I did a quick bing search and here is a PowerShell script to do it.
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/183b8b56-131c-4de7-80bc-08650daf7333/wmi-custom-class-with-powershell?forum=ITCG
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

I have a Macbook, an iPad 2, and an iPhone 4. I also have iCloud on all three devices. For some reason I can not get new information from my contacts folder to transfer to the iPad or the iPhone. Never been a problem before.

I have a Macbook, an iPad 2, and an iPhone 4. I also have iCloud on all three devices. For some reason I can not get new information from my contacts folder to transfer to the iPad or the iPhone. Never been a problem before.

POP: yahoo, aol, comcast/time warnder/road runner
Imap: google, hotmail, and more including icloud.
If you want to use multiple devices - move to imap, I would even say "exchange", but Google does not support free exchange anymore, since January of that year. So Ironically Icloud or Hotmail would be my choices right now.
To find out more about what happens to you, search on Google "difference between pop and imap"

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

Is it possible to get the information from the complete forms send to different email account

When i have a paid account is it than possible to get the information from the different forms send to seperate emailaddresses.
Who dont have a account from formscentral but just need the information directly in there own inboxes?
Because we're looking for a good and simple way to make qoustion & complain forms. But these need to go to different people in the company.

You can have notifications sent to multiple email addresses, but each will need to have a FormsCentral account. They can be free accounts. What you do is create your form and set up the email addresses that you want the information to go to to be Co-authors or Contributors. The co-author/contributor accounts will then need to log into FormsCentral, go to the Options tab and check the email notifications checkbox.
I hope this helps.
-Jeff

Where can I get more information about User exits?

Where can I get more information about user exits,their related Tables and the source code of an User exit?
Thanks

would you please give the Internet addresses of these places?
Mostly I want to get the source of some user exits in Oracle Application.
If you know how and where can I get these sources,I'll appriciate if you let me know.
Regards

HT6006 Hello, I have a charge on my Discover card for $116.86 and I do not know what it is for. Can I get more information on it please. The info in the statement is MHDBQJ1Z3G-0

Hello, I have a charge on my Discover card for $116.86 and I do not know what it is for. Can I get more information on it please. The info in the statement is MHDBQJ1Z3G-0

Please be aware that you are not communicating with Apple when you post in these forums. These are user-to-user support forums, so in almost all cases the only people who will reply to your posts are, like me, your fellow users.
If it's a charge though your iTunes Store account, it should be reflected in your Purchase History:
http://support.apple.com/kb/HT4098
If the charges are not reflected in the Purchase History, then it's most likely a fraudulent charge to your credit card directly or your credit card number has been stolen and used by someone else in another iTunes Store account rather than an unauthorized purchase through your account. In either case it will be up to your bank to handle.
Regards.

Where can I get more information on Cryptography Extension ??

Hi.
Does anyone know how to set up the Jarsafe product ?
Another thing is, how to set security for the Cryptography Extension ??
can anyone tell me where can i get more information on this ??
Thank you.

You need to download the JCE 1.2.1 that is available on the http://java.sun.com website. Once you download the software, you need to make the jar files available. It is easiest to place the JCE jar files in the extension mechanism folder since permission has already been granted, by default, to any code in that folder. That folder is JAVA_HOME\lib\ext on Windows. JAVA_HOME is where the Java Runtime Environment is installed.
When using JarSafe with Java Web Start, make sure that the JCE jar files are placed in the extension mechanism folder of the JRE that Java Web Start is using.

Google cloud print for officejet pro 8600 - could not get printer information from hp.

I just purchased a new OfficeJet Pro 8600 today. Everything seems to work great except for the connector to Google Cloud Print. I can print from AirPrint, as well as emails to the hpeprint.com address, but when I try to register via the google site, I receive the "could not get printer information from HP" error message.
The printer is connected via wireless ethernet, and seems to work find otherwise. I have no restrictions on who can send print jobs, and I have changed the email address for hpeprint.com a few times, as suggested in other forum threads, but it can never connect to the the Cloud Print service. I am at the latest firmware level listed on the HP website. I have tried to initiate the connection from multiple PC's as well as multiple web browsers.
This was a big factor in purchasing this printer. Help anyone?
This question was solved.
View Solution.

Hey rch33k, I am sorry for the ongoing issue that you are having accessing Google Cloud Print. This is being looked into as this is not a singular issue and is affecting other customers as well. Engineers are currently investing this problem to try and provide a solution to it. I want to again apologize and thank you all for your patience in this matter. They only other thing to attempt at this time is to contact Google for further assistance to see if anything can be done on their end. Hopefully this will be fixed quickly
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Google cloud print "could not get printer information from hp"

As of today google cloud print has stopped working with my laser jet pro. I started getting an error message that "hp eprint is unavailable at this time". I decided to remove my hp printer from google cloud print. I haven't been able to add it back in since. Every time I try to verify the printer with google cloud print I get the error message "could not get printer information from hp". Everything seems to be configured properly as far as I can tell. I even removed the printer from hp connected and readded the printer and have changed my printers email address. Help please! I am on Chrome OS and this is the only option I have to print.

The issue just kind of resolved itself today and I was able to add the printer. I'm assuming it was some kind of server issue on hp's end because I haven't changed anything since yesterday.

I need reset my security information, I offered my user name and password is correct bout I can't get the information from your website in my email. So that I can't buy new app pay my money.

I need reset my security information, I offered my user name and password is correct bout I can't get the information from your website in my email. So that I can't buy new app pay my money.

Hi,
Which website your are using to update the Adobe Flash player? No Adobe website ever ask for any id and password to update the flash player.
If you are using MAC machine and its the password prompt while installing update that you are talking about then please follow What userid & password do I need to install Flash Player?
-Varun

Where can i get more instruments from?

Does anyone know where i can get more instruments from?

evanfromga wrote:
Does anyone know where i can get more instruments from?
you can find some 5,000+ SoundFonts here:
http://www.bulletsandbones.com/GB/PlugInsSoundFonts.html
how to install them (the short story):
http://www.bulletsandbones.com/GB/GBFAQ.html#installsf2s
(Let the page FULLY load. The link to your answer is at the top of your screen)
how to use them (the short story):
http://www.bulletsandbones.com/GB/GBFAQ.html#usesf2s
(Let the page FULLY load. The link to your answer is at the top of your screen)
and all about them (the long, hand-holding tutorial):
http://www.bulletsandbones.com/GB/Tutorials.html#allaboutsoundfonts
(Let the page FULLY load. The link to your answer is at the top of your screen)

How can i get instructions information from metadata...?

Hi Everyone!,
How can i get instructions information from metadata.
Anyone Correct this script.
Code :
var xmpString = app.activeDocument.xmpMetadata.rawData;
 if( xmpString !=null ){
 var inst = xmpString.match(/<photoshop:Instructions>(\s)<\/photoshop\:Instructions>/);
 alert(inst);
 else
 alert("There is no Metadata.....!!!")
Thanks in Advance.
-yajiv

Yes you can extract any metadata without opening a file.
There is a script that will let you select any of the fields and put the output to a csv file, this is known as the barredrock script and can be downloaded..
http://www.ps-scripts.com/bb/viewtopic.php?f=19&t=2365&sid=fa9cc3fb726a7a13ecaf0c85a2db05a b&start=15
Another smaller example is here...
http://www.scriptsrus.talktalk.net/Extract%20Metadata.htm

Get mor information from customer AI_SC_GET_SAP_CUSTOMER_NUMBERS

Similar Messages

Maybe you are looking for