Get Motherboard monitor 5.x to work with MSI K8N Neo4

Im trying to get the newest motherboard to work with my moterboard. All sensor display either 0°C or -127°C. It´s a MSI K8N Neo 4.. I know there is the corecell prog but it cannot output the temps to samurize

Quote from: Pertan on 04-March-05, 06:20:07
yepp i know that mbm is discontinued but it´s the best program that samurize reads temps and other things from.. I´ll try speedfan and se if samurize supports it
Samutize supports speedfan... I use it myself.
Got the speedfan running with auto-fan speed... So quiet... and fast response to temp. change
Looooovley ..... 

Similar Messages

  • DDR 500 memory compatible with MSI K8N Neo4 Platninum?

    Hi Folks,
    I have a MSI K8N Neo4 Platinum PCB version 1 (S939/Nvidia NForce 4 Ultra), running the latest BIOS version.  I wondered if DDR 500/PC4000 memory would work at DDR500 speeds?  I note that the MSI webpage for this mobo only mentions DDR400 and in the manual, the BIOS description under "Advanced Chipset Features" - "Memclock Index Value (MHz)" says the maximum speed is 200MHz.  However, when I go to this setting in my own BIOS, I can set it to 250MHz.  I assume that this should give me DDR500?  Would altering this "Memclock Index Value" above 200 MHz cause any other problems with FSB, CPU, HT, PCIe, PCI speeds etc. or is it completely independent?  Does anyone have any recommendations of what sticks would work best (I was thinking 2 * 1024 Mb of Corsair XMS or OCZ XTC).  Now that DDR2 is standard and DDR prices are creeping up, there doesn't seem to be much difference in price between DDR 400 and DDR 500 memory.  Evern if my mobo can't support it, is there any merit in buying DDR 500 memory and running it at DDR 400 or intermediate speeds?
    Cheers!

    The x2 4800 would run 10x250=2500mhz.
    With ddr500 it's beautifull,since you can use the cas latencies which are suited for the memory.
    I have to lower my timings a bit to run them at 500mhz.Not much though,but I don't know what the long term prospect is for my memory if I maintain that for long periods of time.
    As for running games,I found lower cas timings make my games run smoother opposed to the slightly higher ddr clock with slower timings.
    But as mentioned,set cpu vcore 1 step higher in bios,leave the memory at auto,set cpu fsb or HTT at 250mhz,and use the default multiplier of 10 or also leave on auto.'The memory runs in spec and you wont damage it,only the cpu's get another 100mhz and should be a little bit more spicey while temps shouldn't go much higher as it is now.
    The sticks should fit physically and I ran mine once at 266mhz stable,and they are just pc3200@200mhz

  • Bluetooth problem with msi K8N Neo4-54G

    I buy a msi K8N Neo4-54G and it was said on the box : "MSI Dual-Net Card (World First 802.11g+Bluetooth on single PCI Card)"
    dont find any driver or something for bluetooth, but Wi-Fi work perfectly.
    I hope someone know how to fix that problem.
    thanks for your help

    Quote from: crazy on 05-January-06, 16:07:28
    You may firstly clear cmos and load defaults in the bios, and if it is available, please attach us a picture of the screen which the issue occurred when you hit enter during the its detecting the SATA hard disk. I am a little confused about what you said. Please tell me what changes have you made before the issue took place. I just want to help, so do many other people. But please firstly give us more detailed information.
    I did it and nothing! Should I restore the original bios version that came with the mother?
    I'll explain the problem: You enter BIOS, go to the disk properties (where says LBA, LARGE, CYLINDERS, HEAD, etc) and hit enter, usually the screen goes blue and shows a line at the bottom of the screen (they are like triangles pointing downside) and 2 seconds after everithing comes back showing the data of the disk ok? Well, now it hangs forever in the "triangles pointing downside" part and I have to restart the machine...
    Does this belongs to the issue of the K8n neo4 platinum with the maxtor hdd's ??? The mobo is malfunctioning?
    Please helpppp! Thanks!

  • Having problems with IEEE 1394 connection with MSI K8N Neo4 Platinum

    Hi...
    I am encountering problems connecting devices (portable hd etc) via firewire to my PC. My PC does detect the devices.
    I am using the MSI K8N Neo4 Platinum board.
    Check with Device Manager show that the VIA OHCI Compliant IEEE 1394 Host Controller is working properly.
    IEEE 1394 controller has been enabled in Bios.
    Need help to rectify this problem.
    Thanks for the assistance...
    Regards

    Try this patch.

  • Thermalright XP-120 with MSI K8N NEO4 Platinum Mainboard

    Greetings,
    Can anybody tell me if they have configured the Thermalright XP-120 heatsink with an MSI K8N NEO4 Platinum Mainboard. I intend on fitting the AMD Athlon 64 3500+ CPU. I need to clarify if the heatsink/fan will impact on populating the DIMM slots, or any other aspect of configuration.
    Regards,
    Niall

    Quote
    Originally posted by niall_eidw
    FastEddie,
    Can you tell me what cooling options you are installing in your ASUS A8N mobo builds?
    Regards,
    Niall
    Using a Zalman 7000B-Alu (took the asus back plate off and used the zalman's).  Keeps things nice and frosty.  
    Quote
    Originally posted by skippy9146
    Unfortunate how a company's right hand (marketing) doesn't know what the left hand (manufacturing) is doing.... or vice versa.
    They make early announcements to generate intrest in a product and end up losing customers when they don't deliver.
    The hype was these boards would be available at the begining of December, and that, after some minor delays/setbacks.  I've been playing with parts ment for the NV4 based systems since the begining of December.   MSI used to send me test boards direct from Taiwan to debug and stress--hell, I couldn't even get them to answer emails let alone send a test board.

  • Sudden shutoffs with MSI K8N Neo4-F motherboard

    I have reviewed other posts on this forum and it appears that this is usually a PSU problem, but mine is somewhat recurring, so I thought I would post to check.
    I built this computer ~3 years ago. After a couple of years I would experience random shutoffs. Either when I was using the computer or not, the computer would suddenly shutoff without warning ~ once or twice a day (often but not always associated with reading/writing to a second hard drive as part of a backup routine). In order to start the computer again I have to unplug it, wait for the flashing power light to turn off completely and then plug it back in again.
    I replaced the power supply with a RAIDMAX Hybrid 2 RX-530SS +3.3V@28A,+5V@34A,+12V1@20A,+12V2@17A, [email protected], [email protected] and the problem was corrected for several months.
    A few days ago the problem reappeared exactly as it was before. What is the probability that it is again the power supply? Could something about the motherboard be frying the power supplies? I don't have access to another one so I would like to narrow it down before I have to replace something. Replacing this old 939 motherboard won't be easy, so I hope to avoid this. 
    Thanks!

    I got a new one of the Raidmax power supply, which did not resolve the issue. Because the same exact configuration had worked for over 100 days (and for about 2 years with a previous, weaker power supply), I decided it was the motherboard. I realize this wasn't an ideal power supply, but again, the fact that this configuration had worked for so long indicates to me that it is very unlikely to be the power supply (unless the motherboard has become more picky with time).
    I replaced it with a ASRock 939Dual-Sata2 and everything appears to be working great now!
    Thanks for everyone's suggestions. I thought I would update the status so that other people searching in the future would know that replacing the motherboard could solve these problems (although because I didn't replace with the same motherboard I can't be 100% sure that it was solely to blame here).

  • Sound issue with MSI K8N neo4 platinum

    Hi, I'm having some sound problems with the onboard soundcard 
    The problem consist in LAGS when I play an mp3, I've tried a lot of drivers including the lastest version for alc850 from realtek but nothing!!! 
    I hope you can helpme
    Thanks in advance 

    Quote from: dflw on 05-March-05, 06:11:17
    http://www.newegg.com/app/ViewProductDesc.asp?description=29-102-178&depa=0
    nice fix
    yes I know, the ALC850 sux    ....that's a good soundcard, probably my next upgrade 
    I miss the old good soundstorm, not the best to play games with eax but the sound quality was good 

  • How can I get my hp Laserjet 1012 to work with Windows 7?

    How can I get my hp Laserjet 1012 to work with Windows 7?

    Here is a list of products that are not supported in the win7 OS. This product is listed there.
    Products not supported in win7
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • I got a iphone 5 but it does not work on my MacBook with Mac OSx 10.5.8  it says i need OSX 10.6.8 but it will not download because I need OSX 10.6 but it would load either. How do I get the older operating system to work with the IPhone5?

    I got a iphone 5 but it does not work on my MacBook with Mac OSx 10.5.8  it says i need OSX 10.6.8 but it will not download because I need OSX 10.6 but it would load either. How do I get the older operating system to work with the IPhone5?

    You don't. Since you have an Intel Mac, buy a Mac OS X 10.6 DVD from the online Apple Store.
    (71894)

  • I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email

    I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email.
    I JUST NEED HELP

    I would contact Apple under your warranty.  I doubt you received a new iPod since Apple's policy is to give you a refurbished iPod. 

  • How to get Camera RAW / Photoshop CS5 to work with Canon 100D?

    How to get Camera RAW / Photoshop CS5 to work with Canon 100D? I don't want to by this product again and again...

    In what way is ACR not working in Bridge?  Is there no right-click Open in Camera Raw available from Bridge, or there is, but the ACR version is less than ACR 6.7.1 or what exactly is the issue? 
    Also, if you open Photoshop and do Help / About Plug-ins / Camera Raw, is ACR missing from the list, or if not, what version does it say is installed?
    You might also want to describe what methods you have tried to correct the issue, since saying you've tried what you've seen posted and they didn't work, isn't really much to go on.

  • I can't seem to get the Elements 10 loader to work with Windows 8.1.  Is there a workaround?

    I can't seem to get the Elements 10 loader to work with Windows 8.1.  Is there a workaround?

    Never mind.  I figured it all out.  Thanks anyway.

  • I can't get my HP laserjet p1102w to work with airprint

    Hi!
    So it seem's that I can't get my HP laserjet p1102w to work with airprint. I got it to send out it's own Wi-Fi signal, and i get in touch with that signal on my iPad 3. But when I wan't to print something out from Pages, then it says that it can't find any airprinters.
    I tried to update the firmware several times, but it still doesn't work. Any suggestions to what I can do?

    Hey T-racer,
    As a work-around you can also use the HP eprint method which is available with your printer. The application (HP Home & Biz) is available for free in the apple catalogue.
    You can find more info on it here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03128518&cc=us&dlc=en&lc=en &product=4110396&tmp_track_link=ot_search
    It shares many of the same capabilities of airprint but is a different program/feature.
    If you have any questions, just ask!
    I work with HP.

  • Hi, I can't get my old wacom intuos2 to work with mountain lion, any suggestions? Apart from buy a new tablet.

    Hi, I can't get my old wacom intuos2 to work with mountain lion, any suggestions? Apart from buy a new tablet.

    I was out of town for a few days. I had no issue installing the driver on Mountain Lion (10.8.2). What specifically happens when you try to install?
    If you get this message:
    then you need to right-click on the installer package and select 'Open' when you get this message:
    If this isn't your issue you need to be more specific about what is happening.

  • How can i get my unlocked iphone 4 to work with a new pay as u go sim card

    how can i get my unlocked iphone 4 to work with a new pay as u go sim card

    Insert the sim card and activate the iPhone.

Maybe you are looking for

  • Configuration for LDAP IP Address and Port for Exchange 2010

    Let's say Exchange 2010 is installed on a computer that is joined to a domain. However, I would like to redirect LDAP authentication to another IP address and another port like how sharepoint implement it below http://sharepoint.stackexchange.com/que

  • Configurations that needs to be done at the SAP R/3 end

    Hello All, I am doing a File to RFC Scenario. Just like doing a File to IDOC Scenario, I have to maintain the TCODE "SALE" as in create the Logical Systems and attach it to the Clinet and also the RFC Destinations and Distribution Model, Partner Prof

  • Why are my response files no longer updating?

    When I submit a form I get the appropirate messages telling me the data has been sent however they are not showing up in my response files. The files have been updating correctly for 6 months and now just stopped. I do have an error "could not access

  • 4s - contacts, notes lost

    I have an iphone 4s. I have icloud. My contacts button has been on. Same with my notes and calendar. They're all missing. Apple support has been unable to solve. Why even pay for this extra storage? I don't even see my photos in https://www.icloud.co

  • Difference in tones from Lightroom to Photoshop 2014

    What I see in my develop module differs significantly then what is exported into PS 2014 for editing. I am using up to date CC software on the latest OS for Mac.