Get only range with multiple evdre

Hi
Gurus
how to get to select only one EVDRE cells to send data when i have two evdre's ina worksheet.
Well i tried with having applied getonly range to complete one EVDRE, but when i tried to send I still see that the dimensions and members from the first evdre are read.
inthe first evdre i have parent members and so the EVDRE is not successfull when sending data from the second evdre
thanks

Hi,
Whenever you are sending data, it has to be send on the base level members only. If you enter it in the parent level members, it will not be sent.
If you dont want to send data for a particular membersheet you can enter NOSEND in Option range. It will not send any data for that EVDRE report.
While sending the data for some EVDRE, you are always asked for Active Worksheet to Workbook option. If you select worksheet, it will only send data for that particular worksheet only.
Hope this clarifies.
Rgds,
Poonam

Similar Messages

How do you get a line with MULTIPLE fields to WRAP ?

How do you get a line with MULTIPLE fields to WRAP ?
Good afternoon everyone...
THE PROBLEM: Why doesn’t a line with multiple fields WRAP?
HYPOTHETICAL EXAMPLE/WHAT I”D LIKE TO SEE
If I have 2 fields on a line (this is now a hypothetical example and nothing to do with my actual report)….let’s call them field A and field B. And if field A has values of all ‘X’ and field B has values of all ‘Y’…then….the normal case would be (ignore dots – only for spacing):
A……………………… B
XXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYY
But what if A is too long? I would want to see B wrap onto the next line like this:
A……………………………………………………B
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX YYYYYY
YYYYYYYYYYYYY
And similarly….if B is extra long, can the line print as:
A………………………. B
XXXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYYYYYYY
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
I don’t want the case where B is long and I get:
A………………… …B…
XXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYY
………………………..YYYYYYYYYYYYYYYYYYYYY
I can see how you can wrap an individual field like that…but how can you WRAP a line of[b] fields within the frame so it wraps to the BEGINNING of the frame on next line?
My SPECIFIC CASE
I have a report that I have stripped down to a simple structure for the purposes of this explanation.
My DATA MODEL has the main QUERY (for plant family and species data). The columns of the query are divided into 2 groups. The 1st GROUP contains the family data. Below that is the rest of the species data in a 2nd GROUP.
Linking from the 2nd species group (above) is a new QUERY to extract REGION data based on the common key field. Under this 2nd query is another group with all the REGION columns.
The LAYOUT MODEL has a group frame (the main , base one)
On top of this is a repeating frame based on the 1st group (family data).
On top of this is another repeating frame for the 2nd group (species data).
On top of this is 2 Frames on the same line line. The 1st frame contains columns from the species group .
The 2nd frame on this line is a repeating frame. The PRINT DIRECTION for this frame is ACROSS/DOWN. It repeats details of the REGION where the species is found. These columns come from this group come from the REGION QUERY and GROUP.
All fields on the report line have variable horizontal elasticity.
The problem is that when there is too much data on the line, it does NOT WRAP to the 2nd line.. It TRUNCATES.
Can the line be made to WRAP????..
In my current report, 1 of 2 things is happening:
1) All fields print on the line until it hits the page boundary and then it just stops. Truncated!
2) All fields print on the current line, then Oracle Reports throws a new page to print the REMAINDER of the long, input line
But I would like a LONG line to continue printing onto the following line of the same page.
I have tried all combinations of the elasticity fields and the ‘ADVANCED LAYOUT’ properties.
I have been focussing my attention with this problem on the frames .
We are using REPORT BUILDER V 6.0.8.26.0
Thankyou to anyone who may offer assistance.
Tony Calabrese.

Steve,
you gain 1 thing, but you lose something else!
This thing is SO frustrating!
Hey Steve! Good afternoon.
I've done as you suggested....I have a long text boilerplate item - the only 1 on the line...and it has all the column in it.
So it looks like:
&col1 &col2 &col3 &col4 &col5 etc etc etc
And the line expands nicely to each field's requirements.
And when it gets to the right page boundary...it WRAPS to the next line! Beautiful!!!
The only thing is that...when I had individual fields across the line I was able to create format triggers for those fields. And in doing so I was able to reduce the font and change the justification. I had to do that because some of the fields had to appear superscripted.
So I wanted something like (ignore the dots):
...................................ppppp
AAAA BBBB CCCCC DDDD EEEE FFFFFF
So the field of 'ppppp' appeared slightly higher on the line than the other fields...
I can't see how I can do this with a single TEXT field containing all the &COL values.
Have you ever come across anything like this?
Thankyou again,
Tony Calabrese 12/4/2007

How can I get an album with multiple artists to display in my Nano as one album insteadof multiple albums?

How can I get an album with multiple artists to display in my Nano as one album insteadof multiple albums?

See this page for helpful information.
http://samsoft.org.uk/iTunes/grouping.asp
B-rock

I have a 2008 airport extreme, will I get greater range with the new version?

I have a 2008 airport extreme, will I get greater range with the new version of the airport extreme?

I have had both models, and frankly notice little if any difference in range, likely because the broadcast power of wireless routers is set by law, and just about every router is running at 100%.
The dual band feature of the newer model will allow devices that are in close proximity to connect using the 5 GHz band, which runs 2-3 times faster than the 2.4 GHz band.
If you need greater range, you will likely do better by adding something like an AirPort Express to "extend" the wireless signal for greater reach.....rather than simply replacing one AirPort Extreme with another.
Another option....if you opt for the new AirPort Extreme....would be to use it as your "main" base station and use the older Extreme to "extend" the wireless signal.

How can I get a Album with multiple artists to appear as a single album with all of the tracks?

How can I get a Album that contains multiple artists to appear as a single album with multiple tracks? Also when I sync iTunes with my iPhone or iPad the Album appears as multiple albums with each artist. The Album title is the same on each of the affected tracks.

Quick answer: Select all the tracks on the album, File > get info, and either give them all a single "album artist" or check the "compilation" flag.
If these are from multiple-CD sets you may also need to enter the appropriate information in the disc number fields.

Initial Load - AS ABAP - getting only user with a group

Hi,
when i start initial load, i just get users with groups. Is that standard?
Br,
Philip

First of all - you'll need to familiarize yourself with the database for effective learning and debugging. I'm talking about the MS-SQL or Oracle-DB where you installed the IC-schema. It often helps me to understand whats going on behind the scenes.
Secondly - I read some of your posts - I would advise you to install the dispatcher and everything on the server where the DB is hosted - at least as long as you're in development. The MMC can still be on your local pc/laptop, although some things won't work well there (Import, Dispatcher-Status, ...). This'll ease things a lot I suppose.
About the service-user... SAP delivers a role you can import into PFCG (SAP_BC_SEC_IDM_.SAP-File in misc-folder of installation media). This role should be sufficient for your communication user, is updated every now and then and contains only the necessary permissions. Maybe you'll have to extend it (Z_SAP_) in case you want to read special tables not supported by the SAP framework (e.g. license data).
I can hardly believe that the current role assigned to your user only has permissions to users with groups != empty
By now I have no clue why you only see users in IdM with groups assigned in SU01... look up the SQL-table I mentioned if there are more users.
BR
Michael

How To Select Range With Multiple Tracks

Hi,
Is there a way to set an In point within a large reel, and then set an outpoint so I can then select everything within that range to copy?
The Range Selection Tool is sort of useless here, as it only selects the Video track, not the V2 (above it) or audio tracks below it.
I especially need an option like this, for when I have a feature film all on one Reel, and then need to grab selections of it (each about 20 mins long) to copy and paste into their own separate reels. But using the click and drag option can be a nightmare sometimes, and you very frequently miss clips above and below the Video track.
Any help would be appreciated.
Thanks!

Hi Tom,
That creates the same problem though: In the Timeline Index, I can select either video, or audio, or titles. But not all 3 at the same time. I'm trying to create a range over all three of those elements... and quite a wide range.
I seem to recall Final Cut 7 having a way to set the Slider tool, and then click an option that said, "Select all media to the right."

Hierarchical sql-how to get only branches with at least one not null leaves

On 10gR2 we want below hierarchical query to return only the branches which at least have one not NULL leaf ;
-- drop table corporate_slaves purge ;
create table corporate_slaves (
slave_id integer primary key,
supervisor_id references corporate_slaves,
name varchar(100), some_column number );
insert into corporate_slaves values (1, NULL, 'Big Boss ', NULL);
insert into corporate_slaves values (2, 1, 'VP Marketing', NULL);
insert into corporate_slaves values (9, 2, 'Susan ', NULL);
insert into corporate_slaves values (10, 2, 'Sam ', NULL);
insert into corporate_slaves values (3, 1, 'VP Sales', NULL);
insert into corporate_slaves values (4, 3, 'Joe ', NULL);
insert into corporate_slaves values (5, 4, 'Bill ', 5);
insert into corporate_slaves values (6, 1, 'VP Engineering', NULL);
insert into corporate_slaves values (7, 6, 'Jane ', NULL);
insert into corporate_slaves values (8, 6, 'Bob' , 3);
SELECT sys_connect_by_path(NAME, ' / ') path, some_column col, connect_by_isleaf isLeaf
FROM corporate_slaves
CONNECT BY PRIOR slave_id = supervisor_id
START WITH slave_id IN
            (SELECT slave_id FROM corporate_slaves WHERE supervisor_id IS NULL) ;For this example wanted output is like this one since Marketing has no NOT NULL some_column leaves where as Engineering and Sales has at least one;
PATH
/ Big Boss
/ Big Boss / VP Sales
/ Big Boss / VP Sales / Joe
/ Big Boss / VP Sales / Joe / Bill
/ Big Boss / VP Engineering
/ Big Boss / VP Engineering / Jane
/ Big Boss / VP Engineering / Bob                                           Regards.

Here is a slightly modified version, you can try it:
WITH SRC AS (
SELECT   SYS_CONNECT_BY_PATH(NAME ,
                             '/ ') path,
         SOME_COLUMN COL,
         CONNECT_BY_ISLEAF ISLEAF,
         CONNECT_BY_ROOT SLAVE_ID ROOT_SLAVE_ID,
         SLAVE_ID slave_id,
         CONNECT_BY_ROOT SUPERVISOR_ID SUPERVISOR_ID,
         SOME_COLUMN
    FROM CORPORATE_SLAVES
CONNECT BY PRIOR SLAVE_ID = SUPERVISOR_ID
SELECT path, col, isleaf
FROM SRC
WHERE SUPERVISOR_ID IS NULL
AND SLAVE_ID IN (SELECT ROOT_SLAVE_ID FROM SRC WHERE SOME_COLUMN IS NOT NULL)
PATH                                COL                    ISLEAF
/ Big Boss                                                 0
/ Big Boss / VP Sales                                      0
/ Big Boss / VP Sales/ Joe                                 0
/ Big Boss / VP Sales/ Joe / Bill   5                      1
/ Big Boss / VP Engineering                                0
/ Big Boss / VP Engineering/ Bob    3                      1
6 rows selectedI tested it for 1000 records in the source table (tested on Oracle 10 XE),
and .... the performance was a big surprise:
INSERT INTO corporate_slaves
SELECT SLAVE_ID + X SLAVE_ID,
       SUPERVISOR_ID + X SUPERVISOR_ID,
       NAME || ' ' || X NAME,
       some_column
FROM CORPORATE_SLAVES
CROSS JOIN (
SELECT 10*LEVEL x
FROM DUAL
CONNECT BY LEVEL <= 100
COMMIT;
SELECT count(*) FROM corporate_slaves;
COUNT(*)
1010 Your query (slightly modified - removed leading space from the separator in CONNECT_BY_PATH):
set timings on;
CREATE TABLE BUBA1 AS
SELECT SYS_CONNECT_BY_PATH(NAME,
                            '/ ') path,
        some_column col,
        connect_by_isleaf isleaf
    FROM corporate_slaves
   WHERE slave_id IN (SELECT connect_by_root slave_id "slave_id"
                        FROM corporate_slaves
                       WHERE some_column IS NOT NULL
                      CONNECT BY PRIOR slave_id = supervisor_id)
CONNECT BY PRIOR slave_id = supervisor_id
   START WITH SLAVE_ID IN
              (SELECT SLAVE_ID FROM CORPORATE_SLAVES WHERE SUPERVISOR_ID IS NULL)
CREATE TABLE succeeded.
6 095ms elapsedrewritten query:
CREATE TABLE BUBA2 AS
WITH SRC AS (
SELECT   SYS_CONNECT_BY_PATH(NAME ,
                             '/ ') path,
         SOME_COLUMN COL,
         CONNECT_BY_ISLEAF ISLEAF,
         CONNECT_BY_ROOT SLAVE_ID ROOT_SLAVE_ID,
         SLAVE_ID slave_id,
         CONNECT_BY_ROOT SUPERVISOR_ID SUPERVISOR_ID,
         SOME_COLUMN
    FROM CORPORATE_SLAVES
CONNECT BY PRIOR SLAVE_ID = SUPERVISOR_ID
SELECT path, col, isleaf
FROM SRC
WHERE SUPERVISOR_ID IS NULL
AND SLAVE_ID IN (SELECT ROOT_SLAVE_ID FROM SRC WHERE SOME_COLUMN IS NOT NULL)
CREATE TABLE succeeded.
167ms elapsed
SELECT COUNT(*) FROM BUBA1;
COUNT(*)
606
SELECT COUNT(*) FROM BUBA2;
COUNT(*)
606
SELECT COUNT(*) FROM(
SELECT * FROM BUBA1
INTERSECT
SELECT * FROM BUBA2
COUNT(*)
606 ANd now the above tests repeated for 10.000 records
truncate table corporate_slaves;
insert into corporate_slaves values (1, NULL, 'Big Boss ', NULL);
insert into corporate_slaves values (2, 1, 'VP Marketing', NULL);
insert into corporate_slaves values (9, 2, 'Susan ', NULL);
insert into corporate_slaves values (10, 2, 'Sam ', NULL);
insert into corporate_slaves values (3, 1, 'VP Sales', NULL);
insert into corporate_slaves values (4, 3, 'Joe ', NULL);
insert into corporate_slaves values (5, 4, 'Bill ', 5);
insert into corporate_slaves values (6, 1, 'VP Engineering', NULL);
insert into corporate_slaves values (7, 6, 'Jane ', NULL);
insert into corporate_slaves values (8, 6, 'Bob' , 3);
INSERT INTO corporate_slaves
SELECT SLAVE_ID + X SLAVE_ID,
       SUPERVISOR_ID + X SUPERVISOR_ID,
       NAME || ' ' || X NAME,
       some_column
FROM CORPORATE_SLAVES
CROSS JOIN (
SELECT 10*LEVEL x
FROM DUAL
CONNECT BY LEVEL <= 1000
COMMIT;
SELECT count(*) FROM corporate_slaves;
COUNT(*)
10010
CREATE TABLE BUBA22 AS
WITH SRC AS (
SELECT   SYS_CONNECT_BY_PATH(NAME ,
                             '/ ') path,
         SOME_COLUMN COL,
         CONNECT_BY_ISLEAF ISLEAF,
         CONNECT_BY_ROOT SLAVE_ID ROOT_SLAVE_ID,
         SLAVE_ID slave_id,
         CONNECT_BY_ROOT SUPERVISOR_ID SUPERVISOR_ID,
         SOME_COLUMN
    FROM CORPORATE_SLAVES
CONNECT BY PRIOR SLAVE_ID = SUPERVISOR_ID
SELECT path, col, isleaf
FROM SRC
WHERE SUPERVISOR_ID IS NULL
AND SLAVE_ID IN (SELECT ROOT_SLAVE_ID FROM SRC WHERE SOME_COLUMN IS NOT NULL)
CREATE TABLE succeeded.
345ms elapsed
CREATE TABLE BUBA11 AS
SELECT SYS_CONNECT_BY_PATH(NAME,
                            '/ ') path,
        some_column col,
        connect_by_isleaf isleaf
    FROM corporate_slaves
   WHERE slave_id IN (SELECT connect_by_root slave_id "slave_id"
                        FROM corporate_slaves
                       WHERE some_column IS NOT NULL
                      CONNECT BY PRIOR slave_id = supervisor_id)
CONNECT BY PRIOR slave_id = supervisor_id
   START WITH SLAVE_ID IN
              (SELECT SLAVE_ID FROM CORPORATE_SLAVES WHERE SUPERVISOR_ID IS NULL)
CREATE TABLE succeeded.
526 437ms elapsed
SELECT COUNT(*) FROM BUBA11;
COUNT(*)
6006
SELECT COUNT(*) FROM BUBA22;
COUNT(*)
6006
SELECT COUNT(*) FROM(
SELECT * FROM BUBA11
INTERSECT
SELECT * FROM BUBA22
COUNT(*)
6006 Wow.... 526 seconds vs. 0,4 seconds !!!
131500 % performance gain ;)
I have got similar results on Oracle 11.2

Extend range with multiple airport

I want to use an airport express to provide wireless music to speakers that are over 150 feet from my mac and my extreme n base station. How can I do this?

150 feet would be about the theoretical maximum for a wireless signal to travel....under the most ideal conditions.....which would mean no obstructions like walls or ceilings in the signal path. In other words, you would really need a line-of-sight situation between all wireless devices.
Realisically, you really need to consider a wired Ethernet connection for this type of application to avoid constant drop out issues.
A high gain antenna from a company like QuickerTek might be a possible solution as well, but this is always "iffy". You just can't predict wireless performance in advance, so it's important to understand the return/credit policies in case things don't work out as hoped.
http://www.quickertek.com/

Unzip.vi only works with 1-internal file, error2 with multiple even in raw form.

I've attempted to use the LabView unzip tool with several different meathods & I can only get it to work when there's only one file in the zip file. Multiple files continually cause an error in the VI, even when using raw LabView example code/tools. The first file does get unzipped in the specified folder before the error. Error 2 occurred at System Exec.vi. Command was "touch 08131333062007 "Chamber 1.ted"",LabVIEW: Memory is full.

Thanks for you response Juan & while this gives me some insight as to where the error is occurring it doesn't solve my problem. You can use the NI provided "Zip Tool.vi" to zip some files & then start a new blank VI & drop in the unzip tool & do nothing with it & run the Untiltled VI like that & it'll prompt for the file & as soon as you select the file...."Error 2", you can even double-click the unzip from the block diagram & use it that way. I did this as a test to verify that what I'm doing wasn't causing the problem. My actual code uses the "File Dialog Express VI" in a flat sequence to first determine the zip file then the unzip-to location then runs the unzip function. I even get folders if zipped but only one file, no error if there's only one file, the error only occurs with multiple files.
It appears to be an access issue as if it gets the first file & then trys to re-access for the next. I could handle this if it had functions to close the reference but it doesn't. I did try to take the preview, turn it into an array, run it through a for-loop but there's no way to specify a specific file w/in a zip file.
Any thoughts?

Non valuated Goods Receipt for materials with multiple account assignments

We have been using multiple a/c assignments for services on purchase orders for sometime with no issues. Recently we used a multiple a/c assignment distribution for a material P/O. this didn't work the same and the Goods Receipt was set as non valuated.
This leaves the cost showing as a commitment and we do not get any actual costs charged at the GR point until we get and post the invoice. This only happens with multiple account assignments, all material P/O goods receipts for single assignments get valuated.
Were not sure why this happens, and want it treated the same. Is there any way we can get these valuated the same way single assignment materials or multi assignment services are.
The non valuated GR flag is getting set automatically, but we can't see where this is coming from for this scenario, so were a bit stuck.
Any advice/direction would be greatly appreciated.
Thanks
Graham

Hi Deshamol, No the materials are all valuated, as mentioned, they all work fine when used as single a/c assignment.
Anupam, Your answer doesn't make sense to me, this is 1 line on the P/O, therefore 1 material. It can't be both valuated and none valuated for each a/c assignment.
I have read in a note there there is a business function that you can apply to get this working, has anybody tried it?
Thanks
Graham

Using Content Query webpart for specific Document library with multiple managed metadata - Document with multiple metadata tags not showing up

Hi,
I am having an issue where when I insert a Content Query webpart into a page, and filter to managed metadata, all the right documents show up except one document that happens to have two metadata tags attached to it. The content query webpart is set
to only look through a specific document library. I'm not sure what I am doing wrong.
Here is the one document with two metadata tags:
Below is the Content Query:

Hi,
As I understand, you did not get the results with multiple metadata tags through Content Query web part in SharePoint 2013.
Check things below:
1. Check if you have set the item limit more than the display items in Presentation section of the web part. If the item number more than item limit, the rest items will not show.
2. Check if the item you cannot find uses the content type you have set in the content type section of content query web part.
When you edit the properties of the item, you will see the content type the item is using.
Best regards
Sara Fan
TechNet Community Support

LOV Problem with multiple values

HI All,
I have a problem with LOV .When ever i click LOV after search button all values are displaying fine.
But when i get so many values i want to select only one vlaue that is not cmng to the main page ....Cursor is in running state always after that time out error is coming in my application .
This problem is coming with with only single value selection in lOV only problem with Multiple values retrival that time only...
(Iam using 11.1.1.3 Jdeveloper.)
Thanx in advance...

duplicate of {thread:id=2286814}

I made a project with multiple tracks and had it all panned and mixed. Now it's only playing in the right speaker. Not even regestering a left side in the master volume? What happened, how can I get both sides back?

I made a project with multiple tracks and had it all panned and mixed. Now it's only playing in the right speaker. Not even regestering a left side in the master volume? What happened, how can I get both sides back?

Thank you for that info.
For video, the codec is MPEG-4 Video (XVID) and for audio it says MPEG Audio Layer 1/2/3 (mpga).
There are two issues with that file:
The first is the Xvid CODEC (not meant for editing), and then the MPEG Audio/MPGA. I would convert that file, to something that is more editable.
Good luck,
Hunt

How do you download all chapters of a video at once? I purchased a yoga video with multiple chapters and only the first one loaded. It says I can't download another chapter for 90 days.

I purchased a yoga video with multiple chapters and only the first one loaded. It says I can't download another chapter for 90 days. How do I get all chapters to download?

Once a device or computer is associated with your Apple ID, you cannot associate that device or computer with another Apple ID for 90 days.
http://support.apple.com/kb/ht4627

Get only range with multiple evdre

Similar Messages

Maybe you are looking for