GEt Order Groups Info from Internal Orders

Hi,
I need to get the order group information from an internal order and also the cost element associated with it.
Thanks.

Hi,
   Try from below tables : AUFK and CSKA.
Ranjith.

Similar Messages

  • WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037

    I have couple of VMs Server 2012 R2 RTM on Hyper-v Host running the same OS.
    All machines including host and VM that is not in domain have an error in Windowsupdate.log:
    AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
    FW and UAC are off on all. There are posts on web discussing the same error but most of them connect this to WSUS or Config Manager. And it is clear because we are touching Windowsupdate.log when troubleshooting WSUS. And because WSUS on 2012 is BUGGY this
    error confuses too.
    Finally, as mentioned earlier I deployed NEW server 2012 not from SYSPREP and did not place it to the domain. Updated the machine from MS update. Everything is OK beside the same error about COST :).
    So now it is clear it has nothing to do with WSUS or Configuration manager. It indicates to some Network issue. But there is no clear answer. Some suggest just to ignore the error if everything is OK. But I would like to have a clean log. And it is just
    interesting what could cause the problem. Is it Hyper-V stuff or Server 2012 itself. Anyway I guess I am doing right by posting a question on HV forum since here are people that should know 2012 .
    Thanks.
    see the log below
    2013-12-16 20:32:03:610  752 b44 Setup SelfUpdate check completed.  SelfUpdate is NOT required.
    2013-12-16 20:32:04:047  752 b44 PT +++++++++++  PT: Synchronizing server updates  +++++++++++
    2013-12-16 20:32:04:047  752 b44 PT   + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, Server URL =
    https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx
    2013-12-16 20:32:04:047  752 b44 Agent Reading cached app categories using lifetime 604800 seconds
    2013-12-16 20:32:04:047  752 b44 Agent Read 1 cached app categories
    2013-12-16 20:32:05:016  752 b44 PT   + SyncUpdates round trips: 2
    2013-12-16 20:32:06:422  752 b44 Agent   * Found 0 updates and 14 categories in search; evaluated appl. rules of 449 out of 701 deployed entities
    2013-12-16 20:32:06:422  752 b44 Agent *********
    2013-12-16 20:32:06:422  752 b44 Agent **  END  **  Agent: Finding updates [CallerId = AutomaticUpdates  Id = 2]
    2013-12-16 20:32:06:422  752 b44 Agent *************
    2013-12-16 20:32:06:422  752 b44 IdleTmr WU operation (CSearchCall::Init ID 2, operation # 20) stopped; does use network; is not at background priority
    2013-12-16 20:32:06:422  752 b44 IdleTmr Decremented PDC RefCount for Network to 0
    2013-12-16 20:32:06:422  752 b44 IdleTmr Decremented idle timer priority operation counter to 1
    2013-12-16 20:32:06:422  752 ba0 AU >>##  RESUMED  ## AU: Search for updates [CallId = {5393115A-5840-4CB4-9C66-F68034E75DF8} ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}]
    2013-12-16 20:32:06:422  752 ba0 AU   # 0 updates detected
    2013-12-16 20:32:06:422  752 ba0 AU #########
    2013-12-16 20:32:06:422  752 ba0 AU ##  END  ##  AU: Search for updates  [CallId = {5393115A-5840-4CB4-9C66-F68034E75DF8} ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}]
    2013-12-16 20:32:06:422  752 ba0 AU #############
    2013-12-16 20:32:06:422  752 ba0 AU All AU searches complete.
    2013-12-16 20:32:06:422  752 ba0 AU AU setting next detection timeout to 2013-12-17 22:55:28
    2013-12-16 20:32:06:422  752 ba0 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
    2013-12-16 20:32:06:422  752 ba0 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
    "When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

    Hi pob579,
    Sorry for the late .
    I want to know if your network connection indicates " unidentified network ".
    If that is the case , you can try the step below :
        open the "local group policy"
        expand  local computer policy -->computer configuration -->windows settings -->security settings
    --> network list manager policies
        in the right pane you will see Unidentified Networks , double click it , then you can configure the
    Location Type when the network connection is unidentified
        If there is domain , you need to change the same entry in "Domain Policy"
        after that please restart your computer
    Hope this helps
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • HT201269 . I bought a new ipod touch 5G, can I get all my info from my iphone 5 to my new ipod touch 5G

    bought a new ipod touch 5G, can I get all my info from my iphone 5 to my new ipod touch 5G without having the iphone anymore?

    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
    Restore from an existing backup of the iPhome

  • I followed the steps to restore to factory settings now I can't get back my info from a prior backup. My pads screen was frozen on the connect to iTunes I needed to restore. I had to setup my pad as if it was new. How do I acess my prior backup

    I followed the steps to restore to factory settings now I can't get back my info from a prior backup. My pads screen was frozen on the connect to iTunes I needed to restore. I had to setup my pad as if it was new. How do I acess my prior backup

    Once again, KP is correct, but I just want to add that if you don't see the backup in the drop down menu on the summary page of iTunes when you choose the restore from backup option, then the backup is unfortunately gone. If you backup your computer, the iPad backup should probably be in that computer backup. I use Time Machine with my MacBook Pro and can access backups from months ago.
    On a side note, I also archive backups from time to time. If you right click on a backup name in iTunes>Edit>Preferences>Devices (Windows) or iTunes>Preferences>Devices (Mac) you can save that backup or archive it. It will be date and time stamped. I have no idea why I do this to the degree that I do it, but I probably have 12-14 iPad backups archived in iTunes.

  • SMC not getting suggested patch info from Update Manager in Solaris 10

    Hi All,
    why SMC not getting suggested patch info from Update Manager in Solaris 10??
    Thank you in advance.

    Hi All,
    why SMC not getting suggested patch info from Update Manager in Solaris 10??
    Thank you in advance.

  • How to get the extension Info from firefox? Do we have any firefox API to communicate with the browser? I couldnt see the HTML of the widget displayed in the toolbar how to access the widget using JS or any way

    How to get the extension Info from firefox? Do we have any firefox API to communicate with the browser? I couldnt see the HTML of the widget displayed in the toolbar how to access the widget using JS or any way

    Hi,
    Thanks for the suggestion. I've been playing around with some of the classes of the java.net package and java.io
    Using the URL class i can get the content of the data from a STATIC page and output that response to file so that is does not display to the client broswer.
    But this only works if the URL i give points to a static html page.
    So the problem i'm getting is if i'm righting in arguments in the URL, this means that server needs to process the arguments i give and its sends back a dynamic result. Because its dynamic the URL class can not handle this and throws me an exception everytime :(
    Have u ever tried to do some things like this?
    Rahul

  • Failed to get hierarchy group elements from middleware

    When iam configuring the Mobile Infrastructure and clicked on Hierarchy Grouping i got the following error.
    Error:Failed to get hierarchy group elements from middleware. Reason: Could not connect to middleware
    Could anyone tell meaning the above statement and why it is occuring.
    Secondly when iam trying to start the MI Webconsole from the below URL, I was getting Page Cannot be Displayed Error.
    https://server:50300/me/WebConsole/login. Can anyone tell why this error is coming.

    Hi Siva,
    Sorry for the delay reply. I have a few things to ask.
    First my problem is not solved, still iam getting the error.
    Secondly, i have done the configuration for Mobile Administrator, but during the configuration When deploying the JRA File (Standard Installation and Installation of Cluster both needs to be done or Standard Installation is sufficient).
    Not only that after configuring the Mobile Administrator do i need configure the CCMS also, if so if i configure the CCMS would my error be resolved.
    My User has all the required Authorizations but why am i getting the error i could not able to trace out
    Lastly do i need to configure the Mobile Applications part also.
    I need to have a quick reply on this. Can anyone help me in this issue.

  • HT1386 I want to give me old iphone 4 to my daughter and need to get all her info from her old iphone onto a new computer.  The PC she synced with is dead and she does not want to loose all her contacts and music.

    I want to give my old iphone 4 to my daughter and need to get all her info from her old iphone 3 onto a new computer.  The PC she synced with is dead and she does not want to loose all her contacts and music. How can I do this?

    To effectively transfer ownership of the iPhone requires that it be "restored" as a new device.
    ...  The PC she synced with is dead
    The iPhone is not a backup device. Your computer backs up the iPhone, not the other way around. What you use to back up your computer is up to you - Macs use Time Machine. I assume PCs use something similar.
    If her PC backup is dead you will have difficulty extracting content from the iPhone since it is not designed to work that way.
    All her Apple purchases can easily be transferred to another iPhone. However, her contacts will be gone, as will any music or other contact obtained from sources other than Apple.
    There are a number of third party utilities that claim to be able to extract content from an iPhone. See wjosten's procedure here:
    https://discussions.apple.com/docs/DOC-3141

  • To get recent timestamp records from internal table

    hi all,
      i have one requirment
      i'm storing error messages in one table  while creating a sales order basing on timestamp
      which is of this format yyyy-mm-dd hh:mm:ss (random Number) 
      if i want to see the error messages left i'm getting all the error messages displayed
      for example i have created a sales order
    i got 10 errors displayed
    i have rectified 5 errors ... if i again display error messages the 10 errors + the 5 errors is getting displayed
    i want to display the 5 error messages only not the previous messages from internal table
    basing on timestamp current one has to displayed remaining has to deleted from internal table.

    I thought we used Sales Order Incompletion process for this....  but, if you're recreating the errors list every time you save with a create or change transaction then, at save, delete all rows in your error table for this document.   Then get your errors and update your db table from your current errors table.   From this viewpoint, the timestamp is not relevant.

  • HT6154 im trying to get all my info from my old iphone 4 to my new iphone 5s how can i do this with my new computer it doesn't have i tunes on it

    I'm trying to get my old info to my new phone but my computer doesn't have itunes and it won't download it when i plug my new phone in on it

    Hi jim or viola,
    If you are having issues tranfering your content from your old iPhone to your new iPhone, you may find the following article helpful:
    Apple Support: Transfer content from an iPhone, iPad, or iPod touch to a new device
    http://support.apple.com/kb/ht2109
    As for iTunes, you may need to download it manually to your new computer first. You can find the most recent version at the following page:
    Apple - iTunes - Download iTunes Now
    http://www.apple.com/itunes/download/
    Regards,
    - Brenden

  • How to get the groups info for user

    Hi guys i am new to ALUI..
    i am trying to do some enhancement.
    i want to know how to get the information of the users group and the group details using the IDK API?
    Can sombody share some code?

    Hello,
    You are welcome. Here is one way of get what you want:
    1) get all groups id's
    IPortletContext - >IRemoteSession -> IUserManager - > getCurrentUserGroups() -> int []
    2) get details about group
    IRemoteSession.getObjectManager(ObjectClass.UserGroup ) ->
    cycle over int []: {
    IObjectManager -> querySingleObject(comminity id) -> IObjectQueryRow -> getName()
    Because you are going to use PRC and make SOAP calls to portal don't forget setup WS to pass token to portlet (check WS settings)
    Edited by Bryazgin at 05/29/2008 7:48 PM

  • Is there Any way to get TomTom Traffic info From 3G

    Having purchased the 3Gi phone and being assured it is compatable with TomTom Go 720 I was gutted to find that a great phone does not support Tom Tom traffic inf & Updates. Great Phone, Great Sat Nav,No Compatability. Whats Going On!! My previuos "SIMPLE" little Sony ericsson K510i did the job well, Now what do I Do , Sling the iphone? Apple and TomTom "have" to give us a solution as many others will get caught out owning two good products!!

    The iPhone is compatible with many PNDs that support Bluetooth, but only for hands free operation (speaker phone so you don't have to hold the iPhone to drive). That is the only connectivity allowed by bluetooth, and that works with the Tom Tom.
    The Tom Tom can not use your wireless network to fetch data via bluetooth (or a wired connection for that matter), because access to the Edge/3G data network by devices attached to the iphone is restricted by ATT.
    Currently, the only traffic service available for TomTom devices in the USA utilizes a data connection on a mobile phone to retrieve the traffic information. However that service is difficult to use for many people because there are only a handful of compatible phones and compatible phone data plans from carriers here in the USA. However it appears that is soon about to change as it looks like TomTom will soon unveil a RDS-TMC traffic solution in the USA. So what is the advantage of this type of delivery? Instead of relying on a (sometimes costly) data plan from your phone carrier, this service receives information over radio waves through a special antenna.

  • How can I get Number of Lines from internal table?

    Hello at all,
    i have in my Report a internal Table, which have many KUNNR.
    For example the internal Table:
    MANDT.......KUNNR......NAME.........FIRSTNAME........CITY
    ...040..........12345.........Owen............Michael........Liverpool
    ...040..........12345.........Owen............Michael........Liverpool
    ...040..........99999.......Johnson.......... Jeffrey........London
    ...040..........12345.........Owen............Michael........Liverpool
    ...040..........55555.......Hardley.......... Kingston.......Birmingham
    I want to know, how many same KUNNR are existing in the internal Table?
    In my example i need the result 3, because their is existing 3 times the Kunnr 12345 in the internal Table.
    Have anyone an idea, how can I resolve this problem?
    Edited by: Thomas Zloch on Jun 21, 2010 2:55 PM - one question mark at a time is sufficient

    Hi,
    1.Create two internal tables of same type and sort according to Kunnr then Delete the
    adjusent duplicates by comparing KUNNR
    2.Sort the table by KUNNR and use ON change of Concept in that Just increment the counter.
    I am writing the sample logic here.
    tables kna1.
    data: t_kna1 type table of kna1,
             w_kunnr type kna1-kunnr,
             counter type i," Holds No.of KUNNRs in the T_kna1
             t_kna2 type table of kna1.
    select * from kna1 into table kna1 up to 100 rows.
    t_kna2[] = t_kna1[].
    delete t_kna2 by kunnr.
    delete adjusent duplicates from t_kna2 by comparing kunnr."1st Method
    read table t_kna2 transporting no-fields.
    counter = sy-tfill."1st Method
    loop at t_kna1 into kna1."2nd Method
    at first.
    w_kunnr = kna1-kunnr .
    counter = 1.
    endat.
    if w_kunnr ne kna1-kunnr.
    counter = counter + 1.
    endif.
    endloop.
    Note : Here I used a sample table KNA1 in this there are no Duplicates of KUNNR .

  • Get the records number from internal table with conditon.

    Internal table itab got more than 1000 records,now i need to get the number of records with condition that itab-field1 = 'XXXX'.
    actully, i got an inefficient logic to count the number in a loop statement. is there better way to implement it?

    Hi,
    One alternative solution, which may be useful for other parts of your program, is to have an aditional itab1 with a single column/field (field1), which acts like a index or shadow table, and which is filled simultaneously with itab. Then you can use DESCRIBE TABLE itab1 LINES lv_lines.
    Atb

  • Getting format/codec info from media file.

    Hi all,
    Using the QuickTime SDK I see how can retrieve metadata about the content of a media file like title, author, etc. But I can't see how to get metadata about the data itself like format, codec, bitrate, framerate, etc.
    I've used code from the QTMetadata example to get me started with metadata like so:
    while(QTMetaDataGetNextItem(/*... */)){
    but as mentioned, it seems one can only get content metadata.
    How should I go about retrieving metadata about the data?
    Thanks.

    Ok, well, I've found ExtAudioFileGetProperty() from the AudioToolbox framework. It works but I'd still be looking for something similar from the QuickTime framework so if anybody has got a hint, I'd still appreciate it. (Not to mention that thre's doesn't appear to be an equivalent framework for video files, e.g. VideoToolbox, which I need as well).
    Message was edited by: tseegers

Maybe you are looking for

  • Looking for better playback controls

    When I create FLV files for web streaming directly through Adobe Flash, I can take advantage of many choices of playback controls, my favorite one being the ArcticExternalAll. The downside: RIPing my slide shows takes hours. The newest version of Pro

  • Transferring iTunes TV shows from old PC to new MAC

    I recently purchased the a brand new MacBook Pro in mid-July. I would like to know how to get the TV shows I bought through iTunes on my old windows laptop to my new macbook pro. I have the same account pulled up that I purchased them with, but it sa

  • Preview and Acrobat Reader not opening pdf documents

    I downloaded and installed Adobe Acrobat Reader on my new iMac and since then old, new and every other pdf document won't open with a message stating it was damaged etc. Previous good pdf won't open and I fear it is down to installing Acrobat reader.

  • FMMC .... reverse closing???

    Is it possible to reverse the closing of a PO done with FMMC if it was closed in error?

  • Light room lens profiles

    Does anyone know how to make this work reliably?  All my lenses provide exit data, yet if I have the lens profile set to auto it often will not assign the right lens. Worse if I choose a devoloo preset that specifies a lens, then set it to auto and t